I have an unlocked bootloader. The fingerprint is not working on any custom rom when I tap on fingerprint nothing happens, it don't even show any messege.
It is working correct on stock rom.
I tried pixel experience, lineage os, aosp extended and all other roms.
I have tried flashing stock rom then other custom rom but it's still not working.
Any suggestion is appreciated.
Thanks
krishna.rag said:
I have an unlocked bootloader. The fingerprint is not working on any custom rom when I tap on fingerprint nothing happens, it don't even show any messege.
It is working correct on stock rom.
I tried pixel experience, lineage os, aosp extended and all other roms.
I have tried flashing stock rom then other custom rom but it's still not working.
Any suggestion is appreciated.
Thanks
Click to expand...
Click to collapse
I am able to add one but same problem for another finger.
if I added second user than fingerprint didn't work.
i also tried in most of ROMs but same problem.
1. Clean fingerprint scanner
2. Change firmware
3. Delete fingerprints from android folder, reboot
I think that firmware has a problem too. I recently experience some clean flash on any pie rom that has a problem with FP at times
kamalder said:
I am able to add one but same problem for another finger.
if I added second user than fingerprint didn't work.
i also tried in most of ROMs but same problem.
Click to expand...
Click to collapse
Yeah, I am just using a single user still not able to add even a single fingerprint.
amnher said:
I think that firmware has a problem too. I recently experience some clean flash on any pie rom that has a problem with FP at times
Click to expand...
Click to collapse
I tried latest global beta and latest stable but still facing the same.
If you tell me which one worked for you then I'll be very thankful. ?
mindblower01 said:
1. Clean fingerprint scanner
2. Change firmware
3. Delete fingerprints from android folder, reboot
Click to expand...
Click to collapse
Tried not working.
But one thing that I have observed is whenever I add another user it works for the other user and in guest mode as well but only not working for admin user.
I had the same issue. I downloaded older version of the gapps and I fix the issue.
flash this file from twrp i think your problem will be solved
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks buddy, it worked
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
REALLY GOOD JOB. THANKS A LOT! I spend more than a week looking for a solution.
It's working. Thank you very much. My was working partially, now this perfect, rom AOSP Extended Pie.
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thank you sir! It is working again (Arrow-v9.0-mido-OFFICIAL-20190327)
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
really thanks dude. It works. thanks again!
Thank you so much
Thank you so much, fingerprint scanner now works
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks a ton
Worked for me . Iam using the CAF version of pixel experience (15/06)
mindblower01 said:
1. Clean fingerprint scanner
2. Change firmware
3. Delete fingerprints from android folder, reboot
Click to expand...
Click to collapse
I'm sorry I'm new to this, may I know how to change the firmware
Update,, I found the answer, I can flash it after the Rom
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks a lot working perfectly.:laugh::laugh:
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks alot brother
was searching for this for the last 3 days
thank you soo much
i tested many ways , many Roms and kernels , with encryption and without!
just with flashing this , it solved
Related
Use.
Installation using TWRP
Thank you say the creator, I have only a little to fix it.
alex9yust
https://forum.xda-developers.com/member.php?u=4206648
Anyone tested and can confirm it works?
Doman said:
Anyone tested and can confirm it works?
Click to expand...
Click to collapse
It works, tested in rr [2017/01/18], and blissmallow[land][19.01.2017].
Doman said:
Anyone tested and can confirm it works?
Click to expand...
Click to collapse
it's work for L.os but i don't change by finger printer guesue
**** YEAH!!!!
Working super fine, thx thx thx
Tested on RR hridayhs and BlissPop
Perfectly working on lineage os by zwliew ?
Just flash it with twrp?
forever4fter said:
Just flash it with twrp?
Click to expand...
Click to collapse
Yes.
Thanks for sharing. Can I share it to Chinese MIUI forum with original post link and credits?
Yappuccino said:
Thanks for sharing. Can I share it to Chinese MIUI forum with original post link and credits?
Click to expand...
Click to collapse
No problems.
works on cm, with unofficial source also. nice work.
DENWER9008 said:
Yes.
Click to expand...
Click to collapse
Thanks a lot!
how to know of my redmi 3s prime supports goodix fingerprint?
Subhampaul12 said:
how to know of my redmi 3s prime supports goodix fingerprint?
Click to expand...
Click to collapse
If the fingerprint doesn't work and there is no option in Settings to configure it then it is Goodix If so apply the fix via TWRP.
I could finally move from MIUI Much appreciate. Works perfectly on ResurrectionRemix-M-v5.7.4-20170118-land.
DENWER9008 said:
Use.
Installation using TWRP
Thank you say the creator, I have only a little to fix it.
alex9yust
https://forum.xda-developers.com/member.php?u=4206648
Click to expand...
Click to collapse
It's not working for me - flashed the fix directly after installing cm13. Got the option to register fingerprint but right before I can scan my finger it stops the process with: (roughly translated from german) "Registration not completed. Error on fingerprint registration, try again or try another finger". This is without touching the sensor at all.
Any ideas?
It worked for me. I installed it along with the latest RR build and worked normally. I have 2 fingers registered.
Sorry my bad english
I had a quick look at the zip and it essentially "patches" the system to deal with Goodix. You will need kernel support as well though, and that's likely the cause why it's not working for everyone
Work for me.
Well done, great job for this.. i flashed in lineageos and worked.. i just need a more battery life with other rom.
Thanks a lot dude..
How exactly should FP sensor work? It works for unlocking fine, but on my device it also works a little bit like a trackpad. When I touch it (on main screen), it select an app, when I touch it again, it launches that app. In app, it execute various functions ("new post" in email, it select an option in menu, switches radio button, ...). Is it correct, or is it a bug? Is this really intended feature, which I just didn't understand? Because it's annoying more then others . Thx for answer in advance.
edit: So, that was it. Flashed fix and no more odd behaving. But it doesn't work at all. Neither for unlocking. "Registration was not complete..."
Trust me, it works :fingers-crossed:
I face this weird bug in newer Oreo ROMs where sometimes after rebooting the phone and when I enter my password on the lockscreen, the screen goes black and returns to the lockscreen. I faced this on latest Nos,ABC,arrow ROM, mokee ROM etc. If I want to enter into the phone then I have to remove the password from recovery. Anyone facing this issue
I faced it too on dotos
,
smatm said:
I faced it too on dotos
Click to expand...
Click to collapse
Did u face it any other roms, also which recovery
tom jp said:
,
Did u face it any other roms, also which recovery
Click to expand...
Click to collapse
no, I was on gsi rom for a while,then came back to dotos kenzo , faced that bug
recovery is twrp by atg-droid
smatm said:
no, I was on gsi rom for a while,then came back to dotos kenzo , faced that bug
recovery is twrp by atg-droid
Click to expand...
Click to collapse
Ok
tom jp said:
Ok
Click to expand...
Click to collapse
what happens after flashing lockscreen fixer ?
can I readd password ?
tom jp said:
I face this weird bug in newer Oreo ROMs where sometimes after rebooting the phone and when I enter my password on the lockscreen, the screen goes black and returns to the lockscreen. I faced this on latest Nos,ABC,arrow ROM, mokee ROM etc. If I want to enter into the phone then I have to remove the password from recovery. Anyone facing this issue
Click to expand...
Click to collapse
kindly refer to this thread its permanent solution is https://forum.xda-developers.com/re...x-wierd-lockscreen-bug-treble-treble-t3827445
Ishaan Kaushal said:
kindly refer to this thread its permanent solution is https://forum.xda-developers.com/re...x-wierd-lockscreen-bug-treble-treble-t3827445
Click to expand...
Click to collapse
Any easier fix, thanks for the help
tom jp said:
Any easier fix, thanks for the help
Click to expand...
Click to collapse
if there would be an easier fix then why have written this tough fix?
only way to fix this issue is too follow full procedure
if u dont believe on it whether try yourself because 3 friends tried and they also solved it by this method
It was probably magisk issue
nathanchance said:
also @D-m-x (and everyone else), please try this Magisk build (it can be installed in the modules tab in Magisk Manager)
https://transfer.sh/YVFdi/Magisk-v16.7-1674-.zip
It includes a commit that should fix all of the weird issues with Magisk like the PIN not being accepted after a reboot or the phone getting stuck at the Google logo with the progress bar. The root cause is services crashing during the boot chain and either causing deadlock or lack of functionality. It's entirely possible that a service crashed during boot and started causing issues.
Click to expand...
Click to collapse
Please refer to this post, thanks to @nathanchance
Dims_Camper said:
Please refer to this post, thanks to @nathanchance
Click to expand...
Click to collapse
can you re upload it ?
smatm said:
can you re upload it ?
Click to expand...
Click to collapse
Always first flash twrp official in fastboot when u come from miui. Dont flash any other recovery.
And format data using only with twrp official. Other twrp have problems decrypting miui encrypted data.
Coz It throw error when u use format data command to decrypt miui using redwolf and fox recovery.
And if u used treble twrp and cardinal treble and any other treble rom then wipe cust, vendor before u flash non treble rom.
smatm said:
can you re upload it ?
Click to expand...
Click to collapse
Latest magisk merged it already, that old magisk is no longer usable
Ishaan Kaushal said:
if there would be an easier fix then why have written this tough fix?
only way to fix this issue is too follow full procedure
if u dont believe on it whether try yourself because 3 friends tried and they also solved it by this method
Click to expand...
Click to collapse
Well, he might have written the tough fix because maybe he doesn't know about the easier fix. God, stop being arrogant.
Instagram : rishabh.rajbhar
Text me i will guide you
I found oreo and pie roms for our ultra on androidfilehost but after flashing I am not able to get the touch working. I think its a recovery issue, but the twrp-3.1.1 uploaded by zawzaw doesn't mount my system read/write, so no luck. Can anyone test the roms please? Also is there newer version of twrp available for our device?
Here is the link
https://androidfilehost.com/?w=search&s=togari
I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?
billyliem said:
I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?
Click to expand...
Click to collapse
Have you tried 3.0.2-0? That has been working for me on my C6833.
Yes, it is not working for me
Hello does the rom working? I cant install it because i cant have TWRP working in my device
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Rom tester
Hello
First of all thank you for your work, we really appreciate it, i have a suggestion, please make a Telegram group so we can join and test the rom and tell you the bugs and issues, thank you again
Which Kernel to use with this Rom?
raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
the custom rom of the android pie will be continued ?, and I think you could do a post of your roms I think it would give a good revival in this forum and release the source code of the roms and the kernel
raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.
I would love to at least have a custom Android rom oreo stable and functional but by the way it will take a little longer for this to happen
...
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Jaime albino said:
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.
Click to expand...
Click to collapse
phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Click to expand...
Click to collapse
Same Here , flashed the fix , and no touchscreen response after boot
phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no
work even in the recovery.
Click to expand...
Click to collapse
pvillasuso said:
Same Here , flashed the fix , and no touchscreen response after boot
Click to expand...
Click to collapse
i wasn't using those roms anymore because in the oreo version the camera doesn't work and mobile network too, the
9.0 version didn't work either, it's always in bootloop, but i flashed the oreo version again and the touch fix
using philz recovery and twrp and the touch worked like a charm as i said you just need to wait a few seconds, the
purpose of this fix is to fix the touch problem within the rom and not in the recovery, if your recovery doesn't
have touch is not something that this fix or i can do sorry. But i can guarantee that this fix works in this oreo
version because i tested it myself after a clean flash, please try again and tell me if it worked for you.
Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD
install error 7 in TWRP?
raschad said:
Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD
Click to expand...
Click to collapse
phhuang said:
install error 7 in TWRP?
Click to expand...
Click to collapse
Yep same to me.
Malle355 said:
Yep same to me.
Click to expand...
Click to collapse
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)
raschad said:
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)
Click to expand...
Click to collapse
Its booting but touch not working. Tried to flash the touch_fix.zip but not working.
someone needs to compile a new twrp recovery for us, xperia z ultra orphans
Hi,
On some pie ROM, my sim is not detected at boot, need to do Soft reboot, or sometimes, nothing work, need change ROM .
I already try to change my sim card and same issue ...
Anyone have same issue ?
Find solution?
Need u, please help me ! ?
Thanks
Oreo is perfect .
for some little issues pie is not suit for daily use
https://forum.xda-developers.com/redmi-note-4/xiaomi-redmi-note-4-snapdragon-roms-kernels-recoveries--other-development/rom-syberia-project-t3846212
This pie I had used,SIM feature is OK
Ok but I'm testers (official, no flasholic)
So need to know why I have issue on some pie ROM and not on other pie ROM... And need to know if it's only me (my phone) or lot of peeps...
Thanks
billouetaudrey said:
Ok but I'm testers (official, no flasholic)
So need to know why I have issue on some pie ROM and not on other pie ROM... And need to know if it's only me (my phone) or lot of peeps...
Thanks[/QUOTE
I had faced the same issue while flashing unofficial lineage OS 16 and also while flashing AEX Pie but that was because of corruption in my firmware so I changed my firmware by flashing the firmware first then my ROM and this solve my problem hope it helps you
Click to expand...
Click to collapse
Bhanu_p_mishra said:
billouetaudrey said:
Ok but I'm testers (official, no flasholic)
So need to know why I have issue on some pie ROM and not on other pie ROM... And need to know if it's only me (my phone) or lot of peeps...
Thanks[/QUOTE
I had faced the same issue while flashing unofficial lineage OS 16 and also while flashing AEX Pie but that was because of corruption in my firmware so I changed my firmware by flashing the firmware first then my ROM and this solve my problem hope it helps you
Click to expand...
Click to collapse
Hey, I already try to change FW a lot of time ? (stable and beta)
Which FW do u flash ?
Click to expand...
Click to collapse
billouetaudrey said:
Bhanu_p_mishra said:
Hey, I already try to change FW a lot of time ? (stable and beta)
Which FW do u flash ?
Click to expand...
Click to collapse
This one, order of flashing matters in my case
Wiped all partition(except internal storage, USB otg) - >flash firmware - >rom
https://mega.nz/#!jEkRHJJa!XrlsHz3P8_px5f7WAgo_MdEttRA0O8OJZ0w1jgM0Cyw
Click to expand...
Click to collapse
Bhanu_p_mishra said:
billouetaudrey said:
This one, order of flashing matters in my case
Wiped all partition(except internal storage, USB otg) - >flash firmware - >rom
https://mega.nz/#!jEkRHJJa!XrlsHz3P8_px5f7WAgo_MdEttRA0O8OJZ0w1jgM0Cyw
Click to expand...
Click to collapse
Seem to be OK ! Let me try lot of other rom , And I will conclude this !!!
Thanks very much
Click to expand...
Click to collapse
Finally don't help me
I flash Havoc, seem to be ok
I flash LOS, OK
I flash Havoc and restore data partition, not ok... Need to hot reboot for have simd detection
Had the same problem. Found a fix, just rename the simcard that does not get detected (name doesent matter). As soon as you click on ok, you are asked to type in your simcard pin and then it works fine.
I have this issue on ArrowOS for mido. Its an easy fix (at least for me).
Original: Link
I installed pixel experience (not caf) rom today on my poco F1 and the look and feel is great..but when I'm using it the touch isnt working sometimes it stucks. Only fix is to lock and unlock phone again ..then after couple minutes the issue will appear again need help
I have the same issue
If anyone knows how to fix this please help me!! Much appreciated
What version of the vendor did you flash?
It needs to be higher than 9.2.15
riseofsand said:
What version of the vendor did you flash?
It needs to be higher than 9.2.15
Click to expand...
Click to collapse
beryllium-9.4.1-9.0
I am using pixel experience CAF version and vendor 9.4.1... there is no touch issues .. try CAF version and clean flash it
This happens for me too whenever I have TWRP recovery installed, with any ROM (both stock *and* custom ones). I only get this behaviour when entering my SIM cards PIN code or when booting TWRP (I can't swipe so I must turn the screen off, wait for about 5 seconds, then turn it in again)
On PE aosp u can flash miui kernel and fix it! Idk about caf.
What touch panel do you have? check out my thread https://forum.xda-developers.com/poco-f1/help/damn-screen-freezes-t3912069
vamshikailasa said:
I am using pixel experience CAF version and vendor 9.4.1... there is no touch issues .. try CAF version and clean flash it
Click to expand...
Click to collapse
Did u use aosp version? What is the most stable ? Most battery efficient? More smooth? Can u tell me answers for each questions? Thanks alot
Mooatreides said:
On PE aosp u can flash miui kernel and fix it! Idk about caf.
What touch panel do you have? check out my thread https://forum.xda-developers.com/poco-f1/help/damn-screen-freezes-t3912069
Click to expand...
Click to collapse
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
Is it correct?
u wont face any touch issues if u use 9.3.28 kernel, only stock kernel has no issues with touch, idk if pe will boot with it or not... try it yourself, bt i am sure that 9.3.28 has the best touch drivers.
gigishan said:
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
Is it correct?
Click to expand...
Click to collapse
Well try man and see, go for aosp
U can just take the boot.img from miui also only. On PE
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Mooatreides said:
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Click to expand...
Click to collapse
Hahaha yeah man thank u so much for the help
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
I already have PE aosp installed with 9.5.8-9.0 vendor-firmware on my Poco F1. Is it alright to flash just the MIUI kernel (kernel-beryllium_global_9.4.8-ak2.zip) and nothing else?
Or do I need to repeat the whole flashing firmware / installing PE OS thing?
Mariorio said:
I already have PE aosp installed with 9.5.8-9.0 vendor-firmware on my Poco F1. Is it alright to flash just the MIUI kernel (kernel-beryllium_global_9.4.8-ak2.zip) and nothing else?
Or do I need to repeat the whole flashing firmware / installing PE OS thing?
Click to expand...
Click to collapse
Just flash the kernal alone you will be fine
Will just leave it here. Hope someone finds it useful.
I fixed the screen freeze issue using the vendor-firmware and kernel fix on the links below:
Files:
beryllium-9.4.12-9.0-vendor-firmware.zip
kernel-beryllium_global_9.4.12-ak2.zip​
Links here.
Also, I am on Lineage OS, latest build.
Thank you for this thread!
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
Same problem here since couple of weeks. Flashed these using lastest build of Nitrogen OS and everything is working fine so far! Thank you
Mooatreides said:
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Click to expand...
Click to collapse
Edu Lezcano said:
Same problem here since couple of weeks. Flashed these using lastest build of Nitrogen OS and everything is working fine so far! Thank you
Click to expand...
Click to collapse
Will these vendor and kernel combo work for the latest Pixel Experience update(05082019)?