--------------------------------------------------------------------------------
I seem to have a nasty scratch on my hd lens (not the actual lens, just the cover in front of it). The small piece of plastic comes off fairly easily and is only stuck on with some sort of adhesive.
Does anyone know where I can get a replacment cover, or know of any specific materials and adhesive which I could fix on myslef???
Housing-Battery-Back-Cover
BATTERY-COVER
http://forum.xda-developers.com/showthread.php?t=457338
the lens on my back cover cracked when dropped a while back, and to get a good photo i now have to remove the back cover to get the obstruction off... is there anything i can buy short of a whole new back cover? all i need is a sticky piece of glass like the one that comes on the original cover...
thanks!
Why don't you just take a piece of plastic and work on it with sandpaper? You could even use some cd jewel case. The material is usually fragile but if you make a cut on its surface with a sharp knife it will tend to brake along this line. So it's fairly easy to break it down to a rectangular shape roughly the size of the camera cover and work with sandpaper or a file until you have a proper shape. Putting some sticky paper cut to shape of the cover on the plastic (preferably on both sides) will help in achieving the proper shape and will protect the surface from scratching.
Just look around the hose and be creative - i'm sure you'll be able to find a piece of clear, non-scratched plastic somewhere If you feel that the cd-case plastic will be too soft and will scratch too easily you could apply a piece of screen protector to it. It sure isn't worth buying a new screen protector just for that but if you already have one on your phone you could use a piece of it to protect camera cover and get a new one for the screen
As for attaching the cover to g1 back cover, there are many ways ranging from glues to double-sided sticky tapes. Use whatever you have at your disposal (just stay away from cyanoacrylate adhesive aka super glue - its vapor will ruin the transparent plastic).
a new back cover is cheap, like $6.
Camera Lens
jnagar said:
the lens on my back cover cracked when dropped a while back, and to get a good photo i now have to remove the back cover to get the obstruction off... is there anything i can buy short of a whole new back cover? all i need is a sticky piece of glass like the one that comes on the original cover...
thanks!
Click to expand...
Click to collapse
what is your phone model? Different phones have different camera lens with varied shape. A camera lens can not be just replaced by a plastic stuff as the guy said above and it is a prttey tough thing to shape the plastic. an original camera lens does not much. It may be no more than $1。
Howdy all,
What size double sided tape should I use to stick my Asus TF201 digitizer and LCD back together? I have 3 options, a 1mm, 2mm and 3mm double sided tape. Not sure whats on it now, but if anyone has an idea I'd really appreciate it.
Thanks
Nightpath said:
Howdy all,
What size double sided tape should I use to stick my Asus TF201 digitizer and LCD back together? I have 3 options, a 1mm, 2mm and 3mm double sided tape. Not sure whats on it now, but if anyone has an idea I'd really appreciate it.
Thanks
Click to expand...
Click to collapse
I recommend not using any foam tape at all to stick the digitizer to the LCD. I thought there'd be light leaks if I didn't. There were no light leaks. I used double-sided scotch tape to stick the digizer to the front bezel. It worked very well.
If you *do* use foam tape to stick the LCD to the digitizer, you'll go ape-**** crazy if you notice any fingerprints or particles on the inside of the digizer. Without sticking the two together, you can easily separate the two if you need to.
So double sided scotch tape eh? Whats the difference, just easier to take apart if you have to?
Might be an idea, seems to be more of it around here and waaayyy cheaper
Would this be it (put in b0p 1n0 if it asks for a postal code)? : http://www.staples.ca/ENG/Catalog/c...191,4,6&name=CA_SK_SCOTCH+-+Double-Sided+Tape
here's another, says it's removeable tape so I don't think that's a great idea : http://www.staples.ca/ENG/Catalog/cat_sku.asp?CatIds=3,3191,4,6&webid=33734&affixedcode=WW
Here's mounting tape, would this work too you think? http://www.staples.ca/ENG/Catalog/cat_skuset.asp?CatIds=3,3191,4,6&name=CA_SK_3M+-+Mounting+Tape
And here's a tape of MC Hammer : http://www.youtube.com/watch?v=otCpCn0l4Wo
LOL on the MC Hammer!
On the mounting tape, keep in mind that the Prime's display has two types of mounting tape. The digitizer glass is affixed to the plastic bezel with very thin (and very sticky) double-sided celophane type adhesive. Then, the LCD is affixed with black foam tape (and screws). i used the Scotch tape to stick my digitizer to the bezel. This had the advantage of being very easy to trim with an exacto. I chose not to use any foam tape at all with the LCD and just rely on the screws to hold it in place. I was needlessly worried about light bleed. It did not. It was fine.
By not using foam tape, I had the HUGE advantage of being able to later remove a tiny speck of debris that got sandwiched between the LCD and digitizer. It was very small, but drove me nuts. If I had used foam tape to mount the LCD, the risk of breaking the damned thing again would have been too great to try removing the speck. It'd still be there.
I highly recommend not using any foam tape. At least try without first. You can always add it later if your heart is set on it. I've read other threads where folks ended up breaking the digitizer or LCD when having a foam-tape malfunction (stuck to the wrong spot, wasn't lined up right, etc.).
I don't use cheap tape or scotch tape (3m) as generally it's not sticky enough for most jobs like this.
I highly recommend mammoth tape for this job. https://www.google.co.uk/search?q=m...AW81oG4Bg&sqi=2&ved=0CFoQrQQ&biw=1067&bih=693 don't get the one with the cloth membrane (labeled as Heavy duty double sided tape) as its too thick and very hard to cut, the one you need is labeled "multi purpose double sided tape".
I get it from a builders merchants but you can get it online. I have tried many brands and alternatives but mammoth is the best stuff I have found.
Ultimately folks can do whatever they want and feel comfortable with. I would council any close friends to just go with the double-sided Scotch tape to stick the digitizer glass to the bezel. It's plenty sticky enough and there's enough (around 1m total perimeter) that you get a good stick. BONUS: It's good and cheap.
With as fragile as the digitizer glass is, you really don't want to screw around with ridiculously sticky adhesives. On the likely chance (unless you're a pro) that you don't set the glass in the bezel just right, highly sticky adhesive is going to make repositioning much harder and you may very well break the new glass trying to reposition.
I highly recommend not using any adhesive at all to hold the LCD to the digitizer for the reasons I've already mentioned. You'll really wish you hadn't.
Jgrimoldy said:
Ultimately folks can do whatever they want and feel comfortable with. I would council any close friends to just go with the double-sided Scotch tape to stick the digitizer glass to the bezel. It's plenty sticky enough and there's enough (around 1m total perimeter) that you get a good stick. BONUS: It's good and cheap.
With as fragile as the digitizer glass is, you really don't want to screw around with ridiculously sticky adhesives. On the likely chance (unless you're a pro) that you don't set the glass in the bezel just right, highly sticky adhesive is going to make repositioning much harder and you may very well break the new glass trying to reposition.
I highly recommend not using any adhesive at all to hold the LCD to the digitizer for the reasons I've already mentioned. You'll really wish you hadn't.
Click to expand...
Click to collapse
That's what I was thinking. My LCD was slightly cracked on the edge, but not noticeable. With the 2 sided Scotch tape ($5 here) if it breaks again I can replace it without totally busting the LCD. And if it's sitting in a decent case the screen is going to be reinforced anyway.
Nightpath said:
That's what I was thinking. My LCD was slightly cracked on the edge, but not noticeable. With the 2 sided Scotch tape ($5 here) if it breaks again I can replace it without totally busting the LCD. And if it's sitting in a decent case the screen is going to be reinforced anyway.
Click to expand...
Click to collapse
I'm not sure going without the foam is the right thing in all instances. I'm working on a Casio G'Zone Commando, replacing the digitizer, and noticed that the digitizer will only work accurately if it is elevated slightly more than if it just sits on the frame where the foam tape was at. I can't tell if the digitizer is just wonky or if the slight elevation caused by the foam tape is needed with this phone.
I've loved my Poetic case, it's a real winner in my opinion, but last night, sitting on the couch, I felt a rough corner and on examination found the plastic had cracked and fell off in my hand.
I've never dropped my tablet. The piece that broke off was near the speaker and it's relatively thin there.
I sent in for an RMA, hopefully they will just replace it.
Has anyone else had this issue?
Only issue I have with the case is it would be nice if it had a 2nd hole for the camera on the front so when the front is folded all the way back you could still take pics.
mknewman said:
Only issue I have with the case is it would be nice if it had a 2nd hole for the camera on the front so when the front is folded all the way back you could still take pics.
Click to expand...
Click to collapse
You can do this hole itself. It's not so hard.
Find some pen or ballpoint which one have metallic body and this body is with needed diameter. unscrew the body to pieces. Now take off the case, place on some cutting board. Measure the correct place where the hole must be and measure again three times. Take the small hammer and with this metal body make the hole, hammering once or twice. It cuts good hole.
Actually i'm not familiar with this case material but for some materials you can heat the pen metal body.
And yes, you can use any small metal pipe which size is for you needs.
I've only had my v30 for a week and I dropped it in the back glass shattered the worst shatter is in the corner and it's small but it looks pretty deep so I was wondering if it's okay if I filled it witg super glue to try to make my phone waterproof again
use some elastic glue which do not melt plastic or a strong dual side adhesive tape
A 2-part epoxy would fill in the gaps and give you plenty of time to spread it evenly before it sets. Super Glue sets really quickly, isn't flexible and can make a mess.
ED2O9 said:
A 2-part epoxy would fill in the gaps and give you plenty of time to spread it evenly before it sets. Super Glue sets really quickly, isn't flexible and can make a mess.
Click to expand...
Click to collapse
in case you need to open the phone again will you be able to remove the cover if you will use epoxy?
Really, your best option is to just replace the back glass. Kits sell for less than $20 on Ebay and Amazon, and they include the adhesive. The toughest part is of the replacement procedure is not cracking the original glass, but yours is already shattered so that's not a concern. It would look good as new and retain water resistance (assuming you do a good job with the installation).