Related
Hi all. I think this will help you to save some time. Flash KK directly with Flash Tool.
Link: https://drive.google.com/folderview?id=0B6jBYS-HIMjOQWlkWVlRM19kekk&usp=sharing
Enjoy.
stympy said:
Hi all. I think this will help you to save some time. Flash KK directly with Flash Tool.
Link: https://drive.google.com/folderview?id=0B6jBYS-HIMjOQWlkWVlRM19kekk&usp=sharing
Enjoy.
Click to expand...
Click to collapse
Thanks for this.. Will save everybody a lot of time. Cheers !!:good:
Thanq very much for this new firmware..
Sent from my XOLO Q3000 Xtreme V1 by Avinash using XDA Premium 4 mobile app
Thanks for the update, but now files could not be downloaded due to reach of limited access. Is there any mirror site to download?
Hi When download finish it got some errors and once I extract the zip file and found that many files are missing. Anyone got issue like me?
There is a zip file with filename "pradai_row-ota-P780_ROW_8G_S222_140817.zip_WITH_EBR.zip" inside the target_bin folder, can I delete that away ?
It should not have any impact on flashing right ?
Error in file
auto_lover said:
Hi When download finish it got some errors and once I extract the zip file and found that many files are missing. Anyone got issue like me?
Click to expand...
Click to collapse
File size is too big ...1.6 GB !!?? Anyway I decided to download and try. Yes, I also have a problem with the downloaded file. I tried downloading twice. On both the occasions, when I tried to unzip the folder, it is throwing error message as follows for all files :
Unknown method in S222_8GB\P780_ROW_S222_140817\apdb\APDB_MT6589_S01_KK1.MP5_...
Same here. may b a bad download. will try again
Download
I could complete download now.
If you guys have problem in downloading or got error message. This problem occurred when downloading using Chrome browser right?
I downloaded using web browser "Safari" or "Firefox" could be completed without any errors. You can try. Good luck!
---------- Post added at 08:22 PM ---------- Previous post was at 08:11 PM ----------
If you can complete download in anyway but got error while extracting. I run Windows 7 right click at zip file then choose 7 zip to extract.
Guys i have downloaded and installed it succesfully.. I conform there is nothing wrong with the download. Please check your connections and browsers.:good:
File extract
auto_lover said:
I could complete download now.
If you guys have problem in downloading or got error message. This problem occurred when downloading using Chrome browser right?
I downloaded using web browser "Safari" or "Firefox" could be completed without any errors. You can try. Good luck!
---------- Post added at 08:22 PM ---------- Previous post was at 08:11 PM ----------
If you can complete download in anyway but got error while extracting. I run Windows 7 right click at zip file then choose 7 zip to extract.
Click to expand...
Click to collapse
Thank you for the clue. 7 Zip worked for extracting the files without error. Later in the day, will try flashing and report.
ganapathyraman_s said:
Thank you for the clue. 7 Zip worked for extracting the files without error. Later in the day, will try flashing and report.
Click to expand...
Click to collapse
Successfully installed and also got OTA update done for S223. Genie failed to root. VRoot worked. Lower versions of Titanium back up is unable to locate apk file. Higher versions of Titanium back up is stuck on 'checking for root elevation''. Theme center not showing online content but only the couple of local themes. Switching from Dalvik to ART works.
noob here, need a proper guide in how to use the flash tool in the zip file to flash the stock s222 row rom. please guide. thx.
Gouki^ said:
noob here, need a proper guide in how to use the flash tool in the zip file to flash the stock s222 row rom. please guide. thx.
Click to expand...
Click to collapse
Here
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
The steps are allmost the same.
it would not start after i press the "firmware > upgrade" button. i wonder what i did wrong.
Gouki^ said:
it would not start after i press the "firmware > upgrade" button. i wonder what i did wrong.
Click to expand...
Click to collapse
Open the case and press the small red button. See what happent.
Sent from my Lenovo P780
stympy said:
Open the case and press the small red button. See what happent.
Sent from my Lenovo P780
Click to expand...
Click to collapse
okay, i figured out the problem why it doesnt flash. i cant install the driver even if i manage to catch it in device manager. Win8 wont allow me to install the driver after the device disconnect. pls advise.
Gouki^ said:
okay, i figured out the problem why it doesnt flash. i cant install the driver even if i manage to catch it in device manager. Win8 wont allow me to install the driver after the device disconnect. pls advise.
Click to expand...
Click to collapse
The driver should be installed in this way:
1. plug in the phone
2. the driver should appear like an autorun(one exe file)
3. install driver, double click etc etc next next
4. in device manager it is normal to appear like 1 or 2 seconds max, it is not an error.
5. after you install the driver turn off your phone
6. plug in the cable in the computer and in the phone
7. the driver should install automaticaly.
Tell me if something goes wrong.
stympy said:
The driver should be installed in this way:
1. plug in the phone
2. the driver should appear like an autorun(one exe file)
3. install driver, double click etc etc next next
4. in device manager it is normal to appear like 1 or 2 seconds max, it is not an error.
5. after you install the driver turn off your phone
6. plug in the cable in the computer and in the phone
7. the driver should install automaticaly.
Tell me if something goes wrong.
Click to expand...
Click to collapse
i manage to figure it out. I have to do all this in the link below in windows 8/8.1 to get the driver installed. hope it help other win8 users.:fingers-crossed:
http://revryl.com/2013/08/06/install-unsigned-drivers/
Gouki^ said:
i manage to figure it out. I have to do all this in the link below in windows 8/8.1 to get the driver installed. hope it help other win8 users.:fingers-crossed:
http://revryl.com/2013/08/06/install-unsigned-drivers/
Click to expand...
Click to collapse
Indeed. That's why i do not use windows 8 or 8.1.
Sent from my Lenovo P780
Hello guys...!
Recently I've successfully rooted Samsung Galaxy J5 using CF-Auto-Root-e53g-e53gxx-sme500h.zip (Root files of Galaxy E5)
So I'm sharing this to Galaxy J5 users
My phone build number- LMY48B.J500FXXU1AOFA
Warning : I'm not responsible for your device if bricked.. do it on your own risk.
Requirements: Your phone should be charged at least 40-50%
Make sure that the OEM unlock option in Developer option is enabled otherwise it will prevent flashing process.
Step 1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer then Skip this Step.
Step 2: Download and extract the root files on your computer. https://download.chainfire.eu/718/CF-Root1/CF-Auto-Root-e53g-e53gxx-sme500h.zip?retrieve_file=1
Step 3: Now, Switch off your Smartphone.
Step 4: After switching-off the phone, you need to boot into Download Mode. To boot into download mode Press and hold Volume Down, Home and Power button at same time for 5-8 seconds until download mode is active.
Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation you have to press the Volume Up key to continue.
Step 6: Now, Open Odin3 (found in the extracted files, that you have downloaded in the Step#2) on your computer. Then connect your Smartphone to the computer.
Step 7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel.
Step 8: Once your device is detected by Odin, click on the PDA button and select the CF-Auto-Root.tar file (you have downloaded this file in step#2).
Step 9: Now, click on the Start button in Odin to begin the Flashing.
Step 10: Flashing usually takes 30-50 seconds to complete the rooting process on your Samsung Galaxy J5 .Once Rooting process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process Smartphone will re-boot automatically.
Step 11: Once you see, the Pass message in Odin, you can disconnect your Device from the computer.
Step 12: Now, to make sure you have successfully rooted your Samsung galaxy J5,open Applications Menu on your Smartphone and Find SuperSU App. If this app exist on your Smartphone then it means you have successfully rooted your device. Congratulations.
Optional: You can also verify that your device is successfully rooted or not by Root Checker Application.
Hit Thanks cuz i don't have any
Would rooting by this method affect knox ? I want to keep my warranty intact.
jonny789 said:
Would rooting by this method affect knox ? I want to keep my warranty intact.
Click to expand...
Click to collapse
Yes it will. Knox will detect changes in Rom and will not be activated.
So, You have lost your warranty ?
If you flashed original stock rom again, you would get warranty back .
Am I correct ?
jonny789 said:
So, You have lost your warranty ?
If you flashed original stock rom again, you would get warranty back .
Am I correct ?
Click to expand...
Click to collapse
Yes I've lost my warranty.. that doesn't matter..
I've seen a thread where they have successfully restored device (galaxy S5) to its official state.. check it out
http://forum.xda-developers.com/galaxy-s5/help/unroot-rooted-towelroot-sm-g900f-t2804788
Hope it'll work for you too!
Storage issue
guys anyone check device storage ??? out of 8 gb, system memory 3.35 gb and misc. files 1.5 gb ??
arisamanta said:
guys anyone check device storage ??? out of 8 gb, system memory 3.35 gb and misc. files 1.5 gb ??
Click to expand...
Click to collapse
No I see system space 3.35 gb and misc. Files 628 mb only
Just tried this method on my galaxy J5 and failed. Double checking to see if i did something wrong
Not working for me.
SM-J500F 5.1.1 Souter east europe
Flashed, phone reboots and nothing, no root.
Hiii
My Samsung J500f is not rooting in cf-auto root by odin ....
So tell me other root process
arisamanta said:
guys anyone check device storage ??? out of 8 gb, system memory 3.35 gb and misc. files 1.5 gb ??
Click to expand...
Click to collapse
Clean your junk files. That will help you get rid of the misc. files that mostly include caches, backups of apps etc.
[email protected] said:
Hiii
My Samsung J500f is not rooting in cf-auto root by odin ....
So tell me other root process
Click to expand...
Click to collapse
Are you runnung lollipop 5.1.1 or marshmallow 6.0.1?
---------- Post added at 11:20 AM ---------- Previous post was at 10:24 AM ----------
I suggest to root it with TWRP made by Nick Verse for 5.1.1 lollipop and TWRP made by Ganesh Varma for 6.0.1. Besides rooting your phone TWRP is going to be usefull for you in the future like partitioning your sd card or flashing some patches, even at flashing custom roms, kernels etc.
Hey, im having a problem and im hoping someone can give me advice.
I wanted to root the j500fn with android 6.0.1. in a similar way but there seems to be no according autoroot file (.md5) on the internet. There is one for this type of phone but only for previous android versions.
I tried some apps to root without a pc but they dont support it either. So is there something else i can try or should i just wait and hope they release one in the future ?
Goldenfold said:
Hey, im having a problem and im hoping someone can give me advice.
I wanted to root the j500fn with android 6.0.1. in a similar way but there seems to be no according autoroot file (.md5) on the internet. There is one for this type of phone but only for previous android versions.
I tried some apps to root without a pc but they dont support it either. So is there something else i can try or should i just wait and hope they release one in the future ?
Click to expand...
Click to collapse
You could just search a bit more it's all over there man. Also if you look at the comment upon yours I already suggested the rooting way. Do it with twrp recovery by ganesh varma.
Sent from my SM-J500FN using XDA Labs
No it isnt ' all over there' and has it ever occured to you that for people with no experience at all this is like a maze?
Anyway thanks for your helpful comments.
Same problem..not working on j 500 f...
jevtabg said:
Not working for me.
SM-J500F 5.1.1 Souter east europe
Flashed, phone reboots and nothing, no root.
Click to expand...
Click to collapse
something new??i just need root on my J 5 sm -500 F..space is the problem,as you all know!!
sofel said:
something new??i just need root on my J 5 sm -500 F..space is the problem,as you all know!!
Click to expand...
Click to collapse
Flash this with Odin
https://forum.xda-developers.com/ga...ial-twrp-3-1-x-galaxy-sm-j500h-t3588533/page1
And then use it to flash SuperSU, magisk or whatever you want..?
I have no PDA button on odin.
I have BL, AP , CP, CSC and UMS.
root succed , now i have to choose a ROM to install but there are more than 10 ROMS available , can someone guide me or help which one to try ? Cant try them all thats for sure so if any of you tried a few please help me ,,,
thanks a lot
vasilis_ said:
root succed , now i have to choose a ROM to install but there are more than 10 ROMS available , can someone guide me or help which one to try ? Cant try them all thats for sure so if any of you tried a few please help me ,,,
thanks a lot
Click to expand...
Click to collapse
Lineage OS 14.1 by Vince or dyneteve is worth to try
Just got notified from sammobile
Sent from my SM-G900T using XDA-Developers mobile app
g900ptuvu1gpe1 installing now with kies 3
Mega link
https://mega.nz/#!IIN3ASqC!bTmftP3U-8fTh1WLxQ60c0HvWvUkkHEpxFbdnL0EYTI
Is it Marshmallows?
Sent from my SM-G900T using XDA-Developers mobile app
Yes 6.01
Sent from my SM-G900T using XDA-Developers mobile app
Update
http://www.sammobile.com/firmwares/download/72008/G900TUVU1GPE1_G900TTMB1GPE1_TMB/
ashraf sharif said:
Yes 6.01
Sent from my SM-G900T using XDA-Developers mobile app
Click to expand...
Click to collapse
hey man, is your bootloader locked?
Terr20114 said:
hey man, is your bootloader locked?
Click to expand...
Click to collapse
i don't know for sure but probably not. I have had the phone for two years now and the bootloader was never locked previously
I wish I had that link about an hour ago, but figured out how to use the SamFirm Tool posted in another thread. Happy Flashing everyone
Also. First boot is taking ages
I'm so excited! AH. I need to get Odin now -.-
How does everyone like it so far?
Also, does anyone know if it would be a good idea for me to flash back to the stock Lollipop rom and then flash the update via Odin? I'm on a custom rom right now and I don't know if that will mess things up.
I was rooted on FOL1, flashed the marshmallow update via odin. Make sure you factory reset to set the binary status as offical, because I'm having booting issues
ashraf sharif said:
i don't know for sure but probably not. I have had the phone for two years now and the bootloader was never locked previously
Click to expand...
Click to collapse
tmobile didnt usually lock their bootloader but they locked the one for the galaxy s7 so im worried that this one will be locked. I wanna flash a s7 port as soon as i get this updated.
Seems like the phone has been super fast
misican said:
Seems like the phone has been super fast
Click to expand...
Click to collapse
Have you been able to Root? Please share your experience. Can't wait really!
I'm still waiting on the update to boot.
Hmmm, after rebooting and upgrading the "google Play Services" app, Google play finds an update for Samsung Voice Recorder which won't update and crashes with an error code 505. Will try and mess with the permissions for that app.
Decided to flash the stock rooted rom and update via Kies. As of right now it is optimizing app 105/273
Update: It rebooted after optimizing the last app and now its been hanging out at the T-Mobile screen for the last four or so minutes
Update 2: FINALLY got it to boot :3 I ended up flashing the image again through Odin~
Update 3: Rooted (followed this thread http://forum.xda-developers.com/tmo...sm-g900t-firmware-t3358190/page4#post66995024)
Yay~ Marshmallows
Edit: It looks like some people are having trouble with this update so I'm going to give a quick rundown of what I did and how I got everything to go smoothly. Now I'm not saying this is the correct way to things because most likely it isn't, but this is is just what I did that worked (for me, hopefully for you too).
Step 1. I flashed the stock rooted rom on my phone and unrooted it (not sure if this part is necessary) and then connected it to Kies to let it update that way (I was too lazy to mess with Odin tbh).
Step 2. After realizing I had been stuck on the T-Mobile splash screen for about 20 minutes to long I downloaded the image from the Mega link provided on this thread. Booted the phone into download mode, flashed via Odin, phone booted properly in no time.
Step 3. Installed Custom Recovery and Rooted the phone following the method in the link posted above.
MARSHMALLOW PARTY~
So I installed via Odin and as I was going through the initial setup it asks about WiFi and I turn it on and it keeps turning itself off after a few seconds.
UPDATE: Rebooted and was able to get WiFi to stay on.
---------- Post added at 08:41 PM ---------- Previous post was at 08:21 PM ----------
What root options should we be trying? CF Auto Root?
I installed this over the top of Lollipop using Odin. all my data carried over and everything seems to be running just fine. Installed TWRP and SuperSU, roots working just fine as well.
Only issue I'm coming across is an update to the Samsung voice recorder in the Play Store keeps failing with error 505.
Sent from my SM-G900T using Tapatalk
I had rooted latest firmware and i ve downloaded marshmallow, flashed through odin i lost root. its unrooted now
Alipk52 said:
Have you been able to Root? Please share your experience. Can't wait really!
Click to expand...
Click to collapse
well yes i got the same issue too
Chas10 said:
Hmmm, after rebooting and upgrading the "google Play Services" app, Google play finds an update for Samsung Voice Recorder which won't update and crashes with an error code 505. Will try and mess with the permissions for that app.
Click to expand...
Click to collapse
I successfully rooted marshmallow with flashing twrp (latest version) via odin 3.11.1 then flashing superSU 2.74 in twrp = profit?!?!
Next I may try a debloat script I found around xda then viperfx4android. Thank you T-Mobile
Playb3yond said:
I successfully rooted marshmallow with flashing twrp (latest version) via odin 3.11.1 then flashing superSU 2.74 in twrp = profit?!?!
Next I may try a debloat script I found around xda then viperfx4android. Thank you T-Mobile
Click to expand...
Click to collapse
I'm running it now, haven't even bothered to root it... found a non root app to backup and restore my sms/mms/calllogs so I'm not in a hurry to root. Might be fun to actually be able to use the fingerprint for payment options now...
I got this device used and it had been updated to the newest firmware. It would not work with Kingroot, Framaroot, SRS, or Kingo. The only option was to attempt to downgrade to an older firmware with unpatched exploits. The Verizon J1 has a locked bootloader so it cannot flash full firmware packages with older bootloaders. Luckily it can be downgraded to older firmware of the same android version with older kernel. I just had to unpack the firmware and remove the bootloader and repack. I tried to make a rooted stock firmware but can't seem to repack the system.img.ext4 properly after mounting it.
Now let's get down to business
1. Download Odin 3.09
2. Download modified (by me) rootable firmware. Do not rename file it might mess up md5sum.
3. Boot phone to download mode. Hold power+vol down+ home.
4. Start Odin and connect phone with original factory sync cable.
5. Click on the AP button and select the firmware downloaded above. It will check the md5sum automatically when it finishes and passes then press the start button. Once the flash finishes it will reboot.
6. Enable usb debugging.
7. Download Kingoroot for PC (google) and let it run. The apk will not work to root. It should install drivers automatically.
8. Profit!!
I'm testing a method to reliably switch to Supersu but having trouble updating binary 100% of the time. I've tried to flash exposed but Flashfire doesn't seem to work properly with this device. If anyone can suggest a workaround please share.
OP, is it okay if I don't have original factory sync cable in hands?
volibyro said:
OP, is it okay if I don't have original factory sync cable in hands?
Click to expand...
Click to collapse
Yeah its ok you just run into less issues with original cable.
**Working on updating links I have a slow upload speed though.
HideTheCookies said:
I got this device used and it had been updated to the newest firmware. It would not work with Kingroot, Framaroot, SRS, or Kingo. The only option was to attempt to downgrade to an older firmware with unpatched exploits. The Verizon J1 has a locked bootloader so it cannot flash full firmware packages with older bootloaders. Luckily it can be downgraded to older firmware of the same android version with older kernel. I just had to unpack the firmware and remove the bootloader and repack. I tried to make a rooted stock firmware but can't seem to repack the system.img.ext4 properly after mounting it.
Now let's get down to business
1. Download Odin 3.09
2. Download modified (by me) rootable firmware. Do not rename file it might mess up md5sum.
3. Boot phone to download mode. Hold power+vol down+ home.
4. Start Odin and connect phone with original factory sync cable.
5. Click on the AP button and select the firmware downloaded above. It will check the md5sum automatically when it finishes and passes then press the start button. Once the flash finishes it will reboot.
6. Enable usb debugging.
7. Download Kingoroot for PC (google) and let it run. The apk will not work to root. It should install drivers automatically.
8. Profit!!
I'm testing a method to reliably switch to Supersu but having trouble updating binary 100% of the time. I've tried to flash exposed but Flashfire doesn't seem to work properly with this device. If anyone can suggest a workaround please share.
Click to expand...
Click to collapse
If u want to switch to SuperSu from KingoROOT, the best and easiest method would be backing up ur phone and performing a soft reset. Afterwards simply install SuperSu, the superuser binary is already installed from kingroot - no worries, just update it normally via SuperSU and disable KNOX after the update is complete.
That switch idea of yours might get you bricked
Confirmed it works now we need a recovery so we can just flash su
SuperSUme works really really well lol, this phone is 32bit only any1 wanna try 4 a recovery?
Thxx bro
I've tried porting a few times from the j100h twrp and keep getting a return to Verizon dealer screen. So I'd assume the bootloader is still locked. Im going to try the old safestrap and see if i can't get that working. But im kinda a noob so I'll do my best.
p.s. Don't try flashing any recovery until you backup your current one with rashr or flashify.BE SAFE.btw I've yet to see supersume actually work but hey it could happen. I'd much rather just flash the su from a recovery.
gravyd316 said:
I've tried porting a few times from the j100h twrp and keep getting a return to Verizon dealer screen. So I'd assume the bootloader is still locked. Im going to try the old safestrap and see if i can't get that working. But im kinda a noob so I'll do my best.
p.s. Don't try flashing any recovery until you backup your current one with rashr or flashify.BE SAFE.btw I've yet to see supersume actually work but hey it could happen. I'd much rather just flash the su from a recovery.
Click to expand...
Click to collapse
Agreed about flashing the recovery, but you need to be rooted with KingOroot to get SuperSUme to work, & it helps to just keep the screen timeout turned off thru this process , after it says "complete" I downloaded SuperSU & installed, updated, "disabled" knox, & I can also use flashfire although its pretty worthless for anything other than backups, as the little AROMA shell emulator thingy does run after the verizon logo is showing, which indicates to me yea its locked down pretty solid lol.
I tried Safestrap & it gave me a /SS folder in my /etc so I looked into that but I can't manage to figure out how I should go placing the files to make it work lol. But i do know this thing is 32bit ONLY, so compiling the j100H twrp for instance will NOT flash no matter what we do to the bootloader, it will bootloop since the architecture is for a 64bit SoC, we need someone to compile the j100H twrp in a 32bit only compatible architecture, & then you can easily flash it like cake, & TWRP should do the rest like all other Samsung phones O.O
its gotten to the point these are all the apps I have when i restore haha, if you wanna PM me about working together to get this thing a little more flexible I'm always open to ideas . I only use this thing as a hotspot but would totally like to see a recovery at least make it over & from there I could definitely start the ROM bringup
Will I get bricked by doing this with Verizon
Weegee1 said:
Will I get bricked by doing this with Verizon
Click to expand...
Click to collapse
you cant hard brick this device, restore with ODIN start over.
LilAnt530 said:
you cant hard brick this device, restore with ODIN start over.
Click to expand...
Click to collapse
I did it. I keep getting a notification that SE for Android has been turned off. What do I do
Weegee1 said:
I did it. I keep getting a notification that SE for Android has been turned off. What do I do
Click to expand...
Click to collapse
Download any terminal app & type in 'su' then 'setenforce 1'
---------- Post added at 12:42 AM ---------- Previous post was at 12:41 AM ----------
Weegee1 said:
I did it. I keep getting a notification that SE for Android has been turned off. What do I do
Click to expand...
Click to collapse
Download any terminal app & type in 'su' then 'setenforce 1' and you should be good.
LilAnt530 said:
Download any terminal app & type in 'su' then 'setenforce 1'
---------- Post added at 12:42 AM ---------- Previous post was at 12:41 AM ----------
Download any terminal app & type in 'su' then 'setenforce 1' and you should be good.
Click to expand...
Click to collapse
THANKS! sorry last noob question, will I lose root if I turn my phone off
Weegee1 said:
THANKS! sorry last noob question, will I lose root if I turn my phone off
Click to expand...
Click to collapse
Haha believe it or not that's a pretty reasonable question! xD, you shouldn't, i cannot see why, if you have problems just restore i will help ya through it again, & if you want xposed ONLY use the material installer from xda
LilAnt530 said:
Haha believe it or not that's a pretty reasonable question! xD, you shouldn't, i cannot see why, if you have problems just restore i will help ya through it again, & if you want xposed ONLY use the material installer from xda
Click to expand...
Click to collapse
I'll get Xposed another time. I turned off my phone a couple times but the root stayed so that's a plus :victory:
Weegee1 said:
I'll get Xposed another time. I turned off my phone a couple times but the root stayed so that's a plus :victory:
Click to expand...
Click to collapse
If you havent used SUPERSUme to transfer it over to SuperSU, google the app, can't find the free one on play store anymore i guess.
LilAnt530 said:
If you havent used SUPERSUme to transfer it over to SuperSU, google the app, can't find the free one on play store anymore i guess.
Click to expand...
Click to collapse
And with SuperSU, is that one more stable
Hey, Here is a link to the Android Oreo OTA
https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
https://drive.google.com/open?id=1xTtsn6gcg4JEX2dYKPiXTWVhPiGPzIBn
Before you can do this build you will need to be on 2BQK2, so to get to that you need this build: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQU2BQJA-to-S2BQK2-UP
ODIN for BQK2: https://androidfilehost.com/?fid=889964283620771190
this file for BQJA is on SamMobile, SamFirm, and Updato. These are OTA updates besides the flashing required in that.
UPDATE! New build has been released. It is CQL7. To get to that, flash BQK2 with Odin (linked above) then OTA from BQK2 to BQL5 then another OTA from BQL5 to CQL7.
BQK2 to BQL5: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-S2BQL5-UP
BQL5 to CQLB: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQL5-to-U2CQLB-UP
BRA8 to CRB8 https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS3BRA8-to-U3CRB8-UP
THIS WILL UPDATE YOUR BOOTLOADER TO V3, YOU CAN NOT DOWNGRADE
BQL5 Odin: https://samsung-firmware.org/download/Galaxy__Note8__/c7o0/VZW/N950USQS2BQL5/N950UOYN2BQL5/
Oh just a side note, this may be unstable and crash, you have been warned.
This is a discord server with things as they come out. discord.gg/4uxusu8
thanks to thesbros for making the website
(https://i.imgur.com/oBT3bTA.jpg)
(https://i.imgur.com/f8CU1IP.jpg)
mweinbach said:
Hey, Here is a link to the Android Oreo OTA
https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
Before you can do this build you will need to be on 2BQK2, so to get to that you need this build: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQU2BQJA-to-S2BQK2-UP
ODIN for BQK2: https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
this file for BQJA is on SamMobile, SamFirm, and Updato. These are OTA updates besides the flashing required in that.
I currently have an S8 on the Oreo beta and will be buying a Note8 this weekend because of this. I AM SO EXCITED!
Oh just a side note, this may be unstable and crash, you have been warned.
Click to expand...
Click to collapse
How does one go about flashing this? I'm currently on Sprints latest update
mweinbach said:
Hey, Here is a link to the Android Oreo OTA
https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
Before you can do this build you will need to be on 2BQK2, so to get to that you need this build: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQU2BQJA-to-S2BQK2-UP
ODIN for BQK2: https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
this file for BQJA is on SamMobile, SamFirm, and Updato. These are OTA updates besides the flashing required in that.
I currently have an S8 on the Oreo beta and will be buying a Note8 this weekend because of this. I AM SO EXCITED!
Oh just a side note, this may be unstable and crash, you have been warned.
Click to expand...
Click to collapse
And again thanks to ..... lol
This is the unlocked version ???
Sent from my SM-N950U1 using Tapatalk
Del
powerstroke said:
How does one go about flashing this? I'm currently on Sprints latest update
Click to expand...
Click to collapse
1. Download Odin and flash this https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
1.5 In CSC use HOME_CSC to keep data, normal to wipe
2. Download this file: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
3. If you have an SD card, transfer that to your Sd carz
4. Boot into recovery
5.SD: select update from sd card then select your OTA called update.zip
5.ADB: on your phone select sideload over adb then type adb sideload update.zip (replace that update.zip with full file directory)
nexus6r3plicant01 said:
This is the unlocked version ???
Sent from my SM-N950U1 using Tapatalk
Click to expand...
Click to collapse
N950U, so kinda but no, not really. If you set your CSC to A then yah, if not it has carrier bloat.
mweinbach said:
1. Download Odin and flash this https://drive.google.com/uc?id=19gW_CxUf2HdL4UYyxTkyOnBY8cluRIVS&export=download
1.5 In CSC use HOME_CSC to keep data, normal to wipe
2. Download this file: https://samsung.firmware.science/download?url=48993/1488/SS-N950USQS2BQK2-to-U2CQL1-UP
3. If you have an SD card, transfer that to your Sd carz
4. Boot into recovery
5.SD: select update from sd card then select your OTA called update.zip
5.ADB: on your phone select sideload over adb then type adb sideload update.zip (replace that update.zip with full file directory)
Click to expand...
Click to collapse
I'm already on sprints latest. That ok or do I need to downgrade before doing update.zip in recovery? Any mirrors for U2CQL1? Every time I try to download, it fails
powerstroke said:
I'm already on sprints latest. That ok or do I need to downgrade before doing update.zip in recovery? Any mirrors for U2CQL1? Every time I try to download, it fails
Click to expand...
Click to collapse
You need to be on BQK2 as linked in OP
Been downloading that ota file for 15 min and only at 1 percent lol. Thanks for this tho. Can't wait to see if this works.
jaceypoo said:
Been downloading that ota file for 15 min and only at 1 percent lol. Thanks for this tho. Can't wait to see if this works.
Click to expand...
Click to collapse
Uploading a mirror as i type this.
jaceypoo said:
Been downloading that ota file for 15 min and only at 1 percent lol. Thanks for this tho. Can't wait to see if this works.
Click to expand...
Click to collapse
I seriously just got to about 750 mb downloaded of the file and it just stops and starts over. Can't get it downloaded? What the heck lol
I was at 12 percent and the same thing happened to me lol. I'll just wait for the mirror.
Somehow, after 4 attempts at downloading, it worked and only took ~5 mins. everything appears to be in the zip file. I loaded the BK2 file (never got cell signal, and had a lot of strange things in settings) and am applying the update now. Hopefully this doesn't screw up anything. with the BK2 my settings showed custom for the status though, so not sure if I just screwed myself out of Knox stuff.
---------- Post added at 10:14 PM ---------- Previous post was at 09:35 PM ----------
Looks like it's working, some things I noted:
I had a few strange apps in my service folder (BoA and some games)
Samsung connect was causing a bunch of force closures.
Even though I was on unlocked before this, I ended up on Verizon (my carrier).
Everything else seems normal, and had I done a wipe I'd probably be in even better shape. Might to a whole tomorrow.
Sent from my SM-N950U using Tapatalk
damn, this was sniffed out from the AT&T servers?
_Dennis_ said:
Somehow, after 4 attempts at downloading, it worked and only took ~5 mins. everything appears to be in the zip file. I loaded the BK2 file (never got cell signal, and had a lot of strange things in settings) and am applying the update now. Hopefully this doesn't screw up anything. with the BK2 my settings showed custom for the status though, so not sure if I just screwed myself out of Knox stuff.
---------- Post added at 10:14 PM ---------- Previous post was at 09:35 PM ----------
Looks like it's working, some things I noted:
I had a few strange apps in my service folder (BoA and some games)
Samsung connect was causing a bunch of force closures.
Even though I was on unlocked before this, I ended up on Verizon (my carrier).
Everything else seems normal, and had I done a wipe I'd probably be in even better shape. Might to a whole tomorrow.
Click to expand...
Click to collapse
Can u post some screenshots? Anything new in settings or design?
note3userr said:
Can u post some screenshots? Anything new in settings or design?
Click to expand...
Click to collapse
Settings is new some screen shots of it here
https://www.imgur.com/a/c0MJ2
Sent from my SM-N950U using Tapatalk
where is the odin for this? The link does not have Odin
technicalvampire said:
where is the odin for this? The link does not have Odin
Click to expand...
Click to collapse
Don't need odin for this, it's an OTA.
Just put it on your phone, and go to recovery mode and flash from update.zip or whatever.
Longcat14 said:
Don't need odin for this, it's an OTA.
Just put it on your phone, and go to recovery mode and flash from update.zip or whatever.
Click to expand...
Click to collapse
First part does...