LineageOS is a free, community built, aftermarket firmware distribution of Android 5.1.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Installation:
1. Download ROM and copy it onto device
2. Extract boot.img from ROM zip file onto your PC desktop.
3. Connect USB cable to PC.
4. Power off the device and hold Volume+ while connecting other end of USB cable to device. (This will boot device into fastboot mode).
5. Flash the extracted boot.img onto device.
6. Power on the device and start pressing Power Button to boot into Recovery.
7. Wipe System, Data, Cache, Dalvik cache. (DO NOT WIPE SD CARD THERE IS STORED THE ROM FILE).
8. Install the ROM.
9. Reboot and enjoy (First boot can take few minutes be patient please.).
10. (Optional) Download and flash GApps. (This will install Google Play and other Google Apps).
LINK:
Source Code:
CBNUKE: CBNUKE Github
Haxk20: Haxk20 Github
XperiaSTE: XperiaSTE Github
ROM: LineageOS NYPON Build
Feedback:
Feedback is always welcome.
Before posting bug please be sure that you did clean install of ROM and that you post log file with bug report and make the bug report full reported.
Thanks To:
frap129 for Spectrum
Not working List:
1. A2DP (Wont be fixed, Calls works OK)
2. Wifi direct.
3. Video Recording
4. NFC
5. HDMI
6. FM Radio
XDA:DevDB Information
LineageOS for Xperia P [Nypon], ROM for the Sony Xperia P
Contributors
Haxk20, AOSX , XperiaSTE, CBNUKE, munjeni, Agontuk And BlueZ Team
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: TWRP Recovery, Unlocked Bootloader
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: lineage-12.1-2017073
Beta Release Date: 2017-07-30
Created 2017-07-30
Last Updated 2019-10-27
Features and Issues
Code:
- Boot : Ok
- GApps : OpenGApps Micro recommended
- Partitions (Data, Cache) : Ext4 and F2FS supported
- Bluetooth : Ok
- WiFi : Ok
- WiFi Hotspot : Not tested but should work
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Not working
- Lights : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- Sensors : Ok
- Touchscreen : Ok
- FM Radio : (Probably)Not working
- Vibrator : Ok
- Microphone : Ok
- Audio & music : Ok
- Bluetooth audio : Not working
- NFC : Not working
- Kernel : Ok
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Ok
- USB : Ok
- USB OTG : Ok
- Encryption : Not tested
- SEPolicies : Enforcing
Changelog
Code:
Date: 2017-07-30
- Initial Build
- If you are using English language you will see in settings LineageOS version instead of CyanogenMod. (This was added by me).
Date: 2017-07-31
-Added LineageOS boot animation
Date: 2017-08-01
Nothing just build a ROM in few days will not be a builds i will switch toolchain to linaro the will post daily again.
Date: 2017-08-05
Build with Linaro toolchain 4.9. My reaction to it when i was testing it WOOOOOW thats fast.
Date: 2017-08-08
Added new ADB icon (Lineage)
Added new CM easter egg (Lineage)
Updated kernel to Newer version
Date: 2017-08-11
Nothing just build a rom and tried to fix camera recording but without luck
Date: 2017-08-21
Nothing new just new build uploaded to new File Hosting
Thankyou for your efforts.
I'll try and post some screenshots
UmairSaifullah said:
Thankyou for your efforts.
I'll try and post some screenshots
Click to expand...
Click to collapse
Thanks i forgot screenshots it would be perfect if you post some Thanks.
ss.
looks almost same.
first time boot shows cyanogenmod welcome screen
and when you tap on lineageos version you get the cyanogenmod egg
UmairSaifullah said:
ss.
looks almost same.
first time boot shows cyanogenmod welcome screen
and when you tap on lineageos version you get the cyanogenmod egg
Click to expand...
Click to collapse
Yes i know i will try to do something about that but i cannot say for sure because lineage will not support cm12.1 and not even those ui changes.
How long is the boot time for you ?
well i cannot
UmairSaifullah said:
ss.
looks almost same.
first time boot shows cyanogenmod welcome screen
and when you tap on lineageos version you get the cyanogenmod egg
Click to expand...
Click to collapse
well its like this i cannot change that easter egg since 6.0 lineage have removed custom egg and well 7.1 have .xml files instead of .png
and the same applies to SetupWizard app i even tried to build using the .xml files and failed to build because its too modified Im sorry but well if anybody from LineageOS Developers can update the cm-12.1 branch and change it to lineageOS rebrand it would be great but without that we are stuck at CM logos. :crying::crying::crying::crying::crying:
And i think creating new logo for this rom with Lineage name in it is probably illegal yeah if i use it for my own use sure its ok but im publishing this ROM so i cannot do that too.
I'm trying to get linaro toolchain working on this device to take the lastl drop of performance out of this ROM so it will take maybe a week or less don't know but will be great if I make linaro usable cause as I heard it gives great performance. So hopefully I will include it in next build but I'm not 100% sure.
New build up please let me know if anybody found any bug this is build using linaro toolchain and i haent tested all thing on it so if you found anything please let me know and guys its FASTTTTTT.
Edit: If anybody can please test the ROM with some benchmarking tool and compare it to the 2017-08-01 build result i really want to know how much faster the ROM is Thanks.
Haxk20 said:
New build up please let me know if anybody found any bug this is build using linaro toolchain and i haent tested all thing on it so if you found anything please let me know and guys its FASTTTTTT.
Edit: If anybody can please test the ROM with some benchmarking tool and compare it to the 2017-08-01 build result i really want to know how much faster the ROM is Thanks.
Click to expand...
Click to collapse
antutu benchmark for your build 2017-08-05 : 8550
CBNUKE build 2016-10-02 : 10005
fafaremi said:
antutu benchmark for your build 2017-08-05 : 8550
CBNUKE build 2016-10-02 : 10005
Click to expand...
Click to collapse
Uuuu that's not so good can you test my build with normal toolchain ? That is 2017-08-01 and we're both test runner on clean flash of both ROMs ? Or you had some apps installed ?
But thanks for info at least I know that performance is number one
Build will not be coming out at sundays so next build at Monday with marshmallow kernel. Hopefully if not marshmallow then the latest I can find.
fafaremi said:
antutu benchmark for your build 2017-08-05 : 8550
CBNUKE build 2016-10-02 : 10005
Click to expand...
Click to collapse
Can you please test the 2017-08-01 build and post score here ? Wanna to see If linaro even had some good effect.
Haxk20 said:
Can you please test the 2017-08-01 build and post score here ? Wanna to see If linaro even had some good effect.
Click to expand...
Click to collapse
Link for download this build?
fafaremi said:
Link for download this build?
Click to expand...
Click to collapse
will post tomorrow
antutu benchmark for your build 2017-08-05: 10080 Clean flashed
antutu benchmark for your build 2017-08-01: 10021 Clean Flashed
antutu benchmark for your build 2017-08-05: 12061 Dirty flashed over 2017-08-01 build.
Note: Numbers are approximate because i dont remember the whole numbers ill post screenshots later.
Thats good score
UmairSaifullah said:
antutu benchmark for your build 2017-08-05: 10080 Clean flashed
antutu benchmark for your build 2017-08-01: 10021 Clean Flashed
antutu benchmark for your build 2017-08-05: 12061 Dirty flashed over 2017-08-01 build.
Note: Numbers are approximate because i dont remember the whole numbers ill post screenshots later.
Click to expand...
Click to collapse
Yeah i like that score a lot more then 8550 thank you for testing the builds i see that linaro did little improvment its small but its surely there Thank you.
fafaremi said:
Link for download this build?
Click to expand...
Click to collapse
here is link for 2017-08-01 build i want to see score that you get Thank you.
Build 2017-08-01
Result 10614 Build 2017-08-01
Result 12153 Build 2017-08-05 Dirty Flashed over previous build with gapps
Result 10705 Build 2017-08-05 Clean Flashed.
Result 12099 Build 2017-08-05 Dirty Flashed over previous build without gapps
Related
Optimized CyanogenMod 12 Android 5.0.2 Lollipop for the Redmi Note 4G(QCOM) brought to you by haoyangw
NOTE: This is for the QCOM variant of the Redmi Note, otherwise known as Redmi Note 4G, and NOT the MTK variant of the Redmi Note. In short, this ROM will NOT work on the MTK variant of Redmi Note 4G
NOTE: GApps is NOT provided, use any GApps package you can find. I would recommend Open GApps for Lollipop(link below).
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Version Number explanation is in the #2 post, changelog and device tree branches for my github repositories explanation is listed in the #3 post
Comment your reviews below or even better, PM me as I won't be regularly monitoring this thread. Thanks again! You will be listed in the credits too
Downloads
ROMs
All ScarletRice builds and addons(AndroidFileHost)
All ScarletRice builds and addons(BasketBuild)
ScarletRice selected builds and addons(XDA)
I don't have the time to link specific builds everytime there is a new one anymore, so unfortunately you all have to go into XDA downloads or AndroidFileHost folder and download the latest one. So sorry!
Recoveries(compiled by me )
CWM, Philz touch and twrp recoveries(AndroidFIleHost)
Addons(includes my custom kernels So keep an eye on it)
Addons(AndroidFileHost)
Addons(BasketBuild)
XDA Downloads(Addons and ROMs)
Older downloads:
ScarletRice Beta 0.1
ScarletRice Alpha 0.02: https://mega.co.nz/#!40cXxKQL!Dd-pk41oJOPJbhLILLGnS9yAE09ly6nKIIfgRzLCpak
ScarletRice Beta 0.1 AndroidFileHost mirror
ScarletRice Alpha 0.01: https://mega.co.nz/#!EgN1lIxY!n7f-o9bujoh6eAu0H8iuaiiGrQ1fG3OCxYoodAyuLSA
The battery life so far on this ROM is amazing! It doesn't face any kind of drain issues so far, except maybe for the infamous Google Play Services wakelocks. To quote:
Swordsman0815 said:
Battery life seems to be amazing... I am off the charger for over 12hrs and still have around 46% of charge left
Click to expand...
Click to collapse
Well good/bad battery life is actually really subjective, some people might have higher standards due to their past experience etc so it all depends! Try it out yourself and see
Not working:
Cast screen/Screen mirroring
FM Radio
Compass
Back Camera and front camera video Fixed now
Buggy power detection Fixed
Flashing red borders(chrome only) Fixed
Working:
Back and Front camera(video + photo)(wipe dalvik if doesn't work)
Wifi
Headphones
Touch
Auto brightness
Gyroscope
Alarms
Location
Double tap 2 wake(built into ROM zip's kernel and my custom kernels) Removed due to bugs
Anything else
Installation
Download the ROM from the link above
Download GApps package for Lollipop(Recommended: OpenGapps, for 4.4+ and all architectures)
Download any addons/custom kernels from links above or anywhere else
Put the zip files on your SDCard
Reboot in Recovery(choose one of the 3 above if you wish )
Wipe Data / Factory Reset(ONLY IF you are coming from another ROM/upgrading to beta 0.2.x to get working camera)
Recommended: Wipe dalvik-cache
Select "Install zip from SDCard"
Choose CM12 zip file
Select "Install zip from SDCard"
Choose GApps zip file
Optional: Select "Install zip from SDCard"
Optional: Choose addon/kernel zip
Reboot system
Reporting bugs
If you have found a bug, make sure you fill up a form here: Google Form: Bug reporting This allows me to easily track all bugs reported without scanning the whole thread. Do make SURE that you fill in a VERY detailed description! And don't forget logs! For a tutorial on how to get logs, here you go! Log tutorial Of course, feel free to still report bugs here as I will be monitoring this thread But you MUST fill up a form, reporting on XDA is optional
Sources
Manifest
For those who would like a shortcut to sync all the neccessary repos to build stable cm12, just download/copy the contents of this file into .repo/local_manifest: Local manifest xml and the next time you repo sync everything will be there Then just 'lunch cm_dior-userdebug' and 'make -j4 otapackage'
Manually
I've finally given up making my own trees and fixing the annoying bugs in Xiaomi's kernel sources, so here are all the working tree/sources brought to you by our awesome devs! I take no credit for this! GO AND THANK THEM!
Edit: I've made some minor updates and fixes to the trees, but still credit goes to them!
Updated trees(updated by me but originally created by the following devs)
Device tree
Kernel source
Vendor tree(a.k.a. prebuilt/proprietary blobs tree)
Original trees:
@Silesh.Nair's device tree
@Silesh.Nair's vendor tree
@audahadi's kernel source
@stane1983's kernel source
I've uploaded the device tree I used to compile twrp to my device tree above, the branch name is 'twrp'. It's based on syhost's outdated twrp device tree, with problematic flags removed to fix bugs and also translated back into english, so there you go!
NOTE: Currently this device tree is ONLY for compiling CM12, you can face all kinds of build errors if you compile CM11 with it. For example, you will not be able to compile sepolicy in the device tree. You have been warned. Have fun building
Credits
CyanogenMod
XDA
syhost(for his twrp device tree)
Stane1983(for his first working trees)
Silesh.Nair(for his updated trees)
sm_94(for his suggestions on fixes)
And everyone else who contributed logcats and findings and worked hard for the better of all Note 4G users. Thanks!
XDA:DevDB Information
ScarletRice, ROM for the Xiaomi Redmi Note
Contributors
haoyangw
Silesh.Nair
sm_94
stane1983
sadlmadl(Contributed best and most logs and reports)
Swordsman0815(Contribute working/not working reports and logs )
@suhasgta(contributed logs, suggestions and reports )
And all others who contributed logs and reports! Thanks A LOT!
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2015-03-17
Last Updated 2015-11-29
Version numbers
Version Number explanation
There will be 4 naming conventions for builds, namely Alpha, Beta, Release Candidate and Stable.
Alpha - Build is NOT tested and may not boot
Beta - Build has been tested and boots up, but there are many device-related issues and bugs
Release Candidate, or RC - Build has been tested and device-related issues and most bugs are fixed
Stable - No more than 3 minor bugs and no performance or battery drain issues(caused by ROM on my side)
Changelog + Github Repos' Branches
Changelog:
1.0
Device:
Fixed front and back camera(photo+video) as well as video playback
ROM:
Optimized with O3 and graphite
Enabled optimizing compiler for ART
Kernel:
Added more cpu governors(total 23)
Added gamma control
Added faux sound control
Added alucard and intelli hotplug
Compiled with O2
Maybe more(can't remember)
0.2.4
Device:
Merged changes from sileshn
Fixed some more webview problems(that were not caused by the previous absence of webview completely)
Added FM blobs, FM radio should work properly now (also means you'll need my new local manifest to sync qcom's fm stuff)
Tweaked media configs, hopefully improves some stuff(but playing youtube videos and the like still not working )
0.2.3.1
ROM:
Fixed superuser
Device:
Fixed google play store crashes
Tweaked button brightness, hopefully it isn't too bright nor dim
Old builds' changelogs:
0.2.3
ROM:
Compiled with user instead of eng, should result in increased performance!
Fixed performance issues! Now it's faster than syhost's cm12.1! You know what that means? if we build for cm12.1, then bam, performance will be faster than a rocket! And did I mention Justarchi optimizations and graphite flags?
Many vulnerability fixes like the new Serialization vulnerability
Device:
Bright button lights should now be fixed No light at all Sorry!
Location should be working properly now, without relying on Xiaomi's partners like Qualcomm
Fixed annoying flashing red borders ONCE AND FOR ALL!
0.2.2
Clean install(i.e. with factory reset required for working front camera)
ROM:
Fix Gapps problems(e.g. Play store and google keyboard crashes) by removing system jar compression tweak
Improved performance a little
0.2.1
ROM:
Fix prebuilt WebView that caused browser crashes
Add some missing blobs to increase performance
0.2.0
ROM:
Integrate home button fix
Upstream fixes(most notably stagefright vulnerability fix)
Use prebuilt WebView
System jars 0 compression(store only), but causes problems
Add Open Camera as system app
0.1
ROM:
Finally boots
Fix front camera
Device:
Use Silesh.Nair's device tree to fix problems and make ROM boot
Custom kernel:
V1.2.4:
Updated intelliactive and intellidemand to faux's latest sources, no longer using some outdated files that I got because of laziness So intelliactive is finally working properly(no reboot), and also better performance/battery etc
Added intelli hotplug driver, do check it out!
Updated simple and simpleondemand gpu governors, but they still don't work So do AVOID them!
V1:
Add intelliactive and smartmax governors
Add SIO and ZEN I/O schedulers
Experimental fix for back camera
Github Repository Branch Explanations:
Kernel source repo
cm-12.0: stock cm12 kernel without extra governors and I/O schedulers
cm-12.0-custom: CM12 custom kernel with extra governors and I/O schedulers
stock: Original kernel source from Xiaomi with only fixes for compilation errors
cm-12.0-wip: latest fixes/additions for cm12 that may not work/compile successfully
Upcoming(when it appears on the kernel source repo, cm12.1 is coming ):
cm-12.1: CM12.1 custom kernel with extra governors and I/O schedulers
cm-12.1-custom: stock cm12.1 kernel without extra governors and I/O schedulers
wip-cm12.1: latest fixes/additions for cm12.1 that may not work/compile successfully
Hi, I tried your rom just now on my Redmi Note 4G but it doesn't boot at all.
I wouldn't mind being a tester! I'm installing now and I'll see how it works.
fix
what about camera. fixed or not yet
It's stuck on the MI boot screen.
Finaly
thanks haoyangw for this thread. I would to participate but I just a noob and don't have skill about devs . I just follow and subscribe this thread, hope you can fix any problem about this devices. :good:
i can also help testing,i have min knowledge about what a rom is and logcat.
robreyes07 said:
Hi, I tried your rom just now on my Redmi Note 4G but it doesn't boot at all.
Click to expand...
Click to collapse
Hi, can you send me a logcat please? Or install LiveBoot by ChainFire through recovery and post all the errors you see printed. Thanks a lot! Sorry if the ROM doesn't boot
Good to see someone is working on CM12 for our phone. I tried CM12 syhost version and it's awesome but camera doesn't work and I need it. If you manage to get camera to work that would be awesome.
Thanks for your work. You may want to check the source code for the official cm12 version of the htc desire 816. It has the same gpu/cpu combination so there must be some similarities.
What is the point of this thread when the rom doesn't even boot
i think,
shyampareek said:
What is the point of this thread when the rom doesn't even boot
Click to expand...
Click to collapse
I didn't know but i hv subscribe
shyampareek said:
What is the point of this thread when the rom doesn't even boot
Click to expand...
Click to collapse
The point is to encourage someone to work on device. Right now it gathers little to no interest at all.
shyampareek said:
What is the point of this thread when the ROM doesn't even boot
Click to expand...
Click to collapse
Point is to give support to developer, or this thread will die. I think u shouldn't be on this forum, so ungrateful
haoyangw said:
Hi, can you send me a logcat please? Or install LiveBoot by ChainFire through recovery and post all the errors you see printed. Thanks a lot! Sorry if the ROM doesn't boot
Click to expand...
Click to collapse
Sure, maybe this weekend kind of busy this workdays.
robreyes07 said:
Hi, I tried your rom just now on my Redmi Note 4G but it doesn't boot at all.
Click to expand...
Click to collapse
Nemado said:
Thanks for your work. You may want to check the source code for the official cm12 version of the htc desire 816. It has the same gpu/cpu combination so there must be some similarities.
Click to expand...
Click to collapse
Yeah I thought of that, I copied some bits from the desire 816 device tree for Redmi Note 4G. I've tried building recovery with my sources and device tree and the recovery works perfectly, so I think it must be something in the ROM that is the problem. I'll need a logcat for tracking the malfunctioning part.
robreyes07 said:
Sure, maybe this weekend kind of busy this workdays.
Click to expand...
Click to collapse
Thanks a lot! Hope I can get this ROM working soon, then our beloved device will get Lollipop sweetness.
Have you tried to compile kernel that xiaomi relased for our device?
Lineage OS is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
[SIZE="2"]* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
[/SIZE]
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts.
LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Install instructions:
Reboot into recovery (latest official TWRP recommended).
Wipe Data, System and Cache if it's a fresh install.
No wipes required if you're updating from a previous version of CM 13.0 (Wipe Cache and Dalvik Cache recommended).
Flash ROM + Gapps.
Reboot.
Read post 2 before reporting bugs.
KitKat is required, before you flash cm13.[/B]
Download links:
ROM: Click Here
Gapps: http://opengapps.org/
Credits :Huge thanks to @aapav01 for bringing up Cm13 fo our device @adityaupreti for new device sources and help
@SoUnd001 for front cam fix
@[email protected] and @Vladi4ik94 for testing and help
XDA:DevDB Information
CM13 for Grand 2, ROM for the Samsung Galaxy Grand 2
Contributors
Shujath
Source Code Common: https://github.com/ms013g-common
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Kitkat
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-05-03
Created 2016-05-03
Last Updated 2016-05-03
Bug reports:[/SIZE][/B]
LineageOS 13 is in development and has several small bugs and missing translations, so in this thread we'll try to focus on device-specific bugs. Complaints/demands/bug reports without logs will be ignored.
Explain how to reproduce the bug and attach logcat and dmesg (if you had a random reboot, also attach last_kmsg). If you don't know how to get those, you can use this app. Please, do not report bugs if you use any kind of mods (like xposed) or third party kernel.
Known bugs:
Buggy Live Display
Buggy GPS but it works
Frequently Asked Questions:
Q) How can I unlock Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How can I set '3G only' network mode?
A) Open dialer, dial *#*#4636#*#* , open first option "Phone Information", there you can set your preferred network mode.
Q) Why there's a small delay when I wake up the phone?
A) Go to Settings > Display & lights and disable prevent accidental wake-up.
Q) Why is wifi always on in battery stats, even when it was disabled?
A) Go to Settings > Location, press on the 3 dots (top right) > scanning > disable wifi.
Q) How do I update Gapps? (Also useful if you have Gapps related problems).
A) Reboot into recovery. Wipe System, Cache and Dalvik Cache. Install ROM + Gapps. Reboot.
Change Log 13th May:-
Fixed Autorotation bug
Fixed Rear Cam
FIxed Auto Brightness Flickering
Fixed Graphic glitches
Lot more to come
Change Log 19 September:-
Rear cam fix
Added Gello browser
Security patch level updated to September
Updated theme manager with new UI
New optimizing apps view
Upstream Merge
Change Log 19 September 2nd build:-
Fixed GPS
Change Log: 02 OCtober :-
Updated Kernel Configuration
Added Z Cache
Updated Power Profile for better performance
Upsteam Merge
Change 03rd OCtober :-
Updated Kernel Configuration
Updated audio accelerator in kernel
Enabled Zcache and added Zram
Updated battery capacity to 2600mah in the power profile.
Updated Auto Brightness levels from 4 to 10
Autobrightness backlight update
Updated media profiles of the device which was outdated
Added custom power hal to increase battery life
Change 27th Jan :-
Good Bye CyanogenMod
Welcome LineageOS
Applied Front Cam fix by @SoUnd001
Removed Zcache as it was causing Offline Charge bug
No Need to flash multiple files from now, Just flash ROM and Gapps
Thanks bro for CM13 :good::good::good:....this is the ROM I'm waiting for
Please Fix the Credits
The Source which You have mention in the Thread is all mine
Shujath said:
Change Log :-
Fixed Autorotation bug
Fixed Rear Cam
FIxed Auto Brightness Flickering
Fixed Graphic glitches
Lot more to come
Click to expand...
Click to collapse
CM13 getting better day by day ...... Thanks Mr. Shujath :good:
was waiting for this!thanks buddy!
EDIT:link the correct(new)device and vendor tree.
Invalid response from the server: 502
can`t download :/
Igor2906 said:
Invalid response from the server: 502
can`t download :/
Click to expand...
Click to collapse
Some AFH servers are down atm,wait for sometime.
praveensingh569 said:
Thanks bro for CM13 :good::good::good:....this is the ROM I'm waiting for
Click to expand...
Click to collapse
You are welcome
aapav01 said:
Please Fix the Credits
The Source which You have mention in the Thread is all mine
Click to expand...
Click to collapse
Ive used msm common and kernel from Msm8226 and device, vendor from aditya
[email protected] said:
CM13 getting better day by day ...... Thanks Mr. Shujath :good:
Click to expand...
Click to collapse
You are wecome, Enmjoy the ROM
neonkat said:
was waiting for this!thanks buddy!
EDIT:link the correct(new)device and vendor tree.
Click to expand...
Click to collapse
Yup fixed now, thanks
Igor2906 said:
Invalid response from the server: 502
can`t download :/
Click to expand...
Click to collapse
Yes AFH Is down
Bro, i flashed infected kernel but im some momemt my screen become black ,phone rebooted and again black screen i cant do anything with my phone
Flashed again all cm same trouble ,maybe some app doing this?
Igor2906 said:
Bro, i flashed infected kernel but im some momemt my screen become black ,phone rebooted and again black screen i cant do anything with my phone
Flashed again all cm same trouble ,maybe some app doing this?
Click to expand...
Click to collapse
Do a clean install
Sent from my SM-G7102 using XDA-Developers mobile app
anyway
how about pull request fix rotation to msm8226-samsung repo?
to ms01-common
Hi, thanks for your update.
"Go to Settings > Display & lights and disable prevent accidental wake-up."
but i couldn't find "prevent accidental wake-up" option in settings, please help on this
Shujath said:
Ive used msm common and kernel from Msm8226 and device, vendor from aditya
Click to expand...
Click to collapse
Aditya have remove my Commit history there nothing changed in vendor bcoz if he change anything in vendor it may break things like RIL, :good:
faizauthar12 said:
anyway
how about pull request fix rotation to msm8226-samsung repo?
to ms01-common
Click to expand...
Click to collapse
I did
@Shujath after 1day of use, the Rom is very good..Thanks you very much bro.. i found only 2 issues,
- frontCam
- SDcard Name showing 'sdcard1'
grupix said:
do a clean install
sent from my sm-g7102 using xda-developers mobile app
Click to expand...
Click to collapse
\
Вас зрозумів!
igor2906 said:
\
Вас зрозумів!
Click to expand...
Click to collapse
СЛАВА УКРАЇНІ!!!
Good day. I'm really grateful for this ROM. It is nice, but i have an issue. I can't seem to access the internet on my phone, even though i can see the network. But i can access it through mobile hotspot. I don't understand why.
LineageOS for N7100
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is not an official version of the LineageOS ROM for the Note II, I have been maintaining the Note II device sources for quite some time under Paranoid Android when they were supporting Legacy devices. Since PA is no longer supporting legacy devices i decided to base my ROM on CM sources from CM 13.0 (MM 6.0) onward.
Now I present to you the LineageOS ROM based on Android 7.1(Nougat) for the Note II / N7100. This project is still in early stages of development, but I can say that this ROM boots and works and can be used as a Daily driver. Some might not agree but i will leave it to you individuals to make your decision on how you want to use this ROM.
I will do my best to keep the ROM updated most of the time, but at times there might be some delays and that will be primarily because I am busy with my official work that i do for my living and or mostly spending time with my family.
Now lets get to see what works and what does not work. This list is subjected to change in the course of time and i will try to keep it updated.
Working:
- Audio
- OpenGL (CPU rendering)
- MALI blobs (GPU rendering)
- HWComposer and MALI R3P0 drivers
- Brightness Settings
- Ambient Display
- Rotation
- Camera
- WiFi
- Bluetooth
- NFC (Android Beam)
- Sensors (that are working)
- Acceleration Sensor- Light Sensor- Proximity Sensor- Gyroscope Sensor- Pressure Sensor- Sound Sensor- Vibration
- Volume keys
- Home Button wake
- RIL
- GPS - working very well now
- Signal Icon
- Soft Keyboard
- Pin lock
- External SD Card
- Torch
- Video recording
- Video Playback (Gallery and other 3rd party apps)
- Youtube App, Youtube mobile from chrome dev browser only works
- Status Bar Battery customization (working partially)
- PIE
- Accidental Touch
- Pocket Detection
Not working
You tell me if there is any thing that is not working
DO NOT POST BUG REPORTS WITHOUT LOGCAT OR STEPS TO REPRODUCE THE BUG
ROM Download Link
ROM: [url]http://tilak.sergix44.ovh/n7100/[/URL]
ROM: [url]https://www.androidfilehost.com/?w=files&flid=119410[/URL]
Gapps Download Link
Gapps: [url]http://opengapps.org/[/URL]
Changelogs
View LineageOS Gerrit Page: [url]https://review.lineageos.org/[/URL]
NEW INSTALLATION INSTRUCTIONS
- Download the latest build
- Download Gapps
- Take a nandroid backup
- Recommended - Full wipe and factory reset
- Flash ROM using latest TWRP 3.x Recovery
- Flash Gapps
- Reboot.
- Enjoy!
UPDATE INSTRUCTIONS
- Download the latest build
- Take a nandroid backup
- Flash ROM using TWRP 3.x recovery
- Flash Gapps
- Wipe cache
- Wipe dalvik cache
- Reboot
- Enjoy!
Note II G+ Community: [url]https://plus.google.com/communities/112507607742650442080[/URL]
Device Tree: [url]https://github.com/tilaksidduram/android_device_samsung_n7100[/URL]
Kernel Sources: [url]https://github.com/CyanogenMod/android_kernel_samsung_smdk4412[/URL]
XDA:DevDB Information
[ROM][7.1.1] LineageOS for N7100 [Unofficial], ROM for the Samsung Galaxy Note II
Contributors
tilaksidduram
Source Code: [url]https://github.com/lineageos[/URL]
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-10-25
Last Updated 2016-10-25
Reserved
Reserved 1
AWESOME!!!!
GREAT GREAT GREAT! You are the best! Can't wait to try now! Thank you Tilak!
question: rom support ota update? (your ota update...of course!)
Great job tilak @Hibinm
Wow....great rom....
Good...great work.
Rom link is wrong...this is the link :
https://www.androidfilehost.com/?w=files&flid=119410
Superb!
Sent from my GT-N7100 using XDA-Developers mobile app
Nice! Waiting for AOSP
Thank you so much for this ROM. And it's nice to see you here.
Gesendet von meinem GT-N7100 mit Tapatalk
I would love to give it a try. Go devs Go! You're awesome.
Great work
Is this a newer version ?
Or the previous version that you posted on g+
✌
Cocolopes said:
Good...great work.
Rom link is wrong...this is the link :
https://www.androidfilehost.com/?w=files&flid=119410
Click to expand...
Click to collapse
I have updated the download link in the OP. Thanks for catching it.
every time i try to call any number the screen turn of and not able to get it back to turn on > after the call end the screen turn on again > sorry for my bad eng
Yudh said:
Great work
Is this a newer version ?
Or the previous version that you posted on g+
✌
Click to expand...
Click to collapse
You can find the latest update in this link. 10/24 build is the latest one.
https://www.androidfilehost.com/?w=files&flid=119410
refoo said:
every time i try to call any number the screen turn of and not able to get it back to turn on > after the call end the screen turn on again > sorry for my bad eng
Click to expand...
Click to collapse
The reason for this is proximity sensor is not fully working. I am looking into this issue currently.
Hi,
the build is failing with CyanogenMod kernel: http://jenkins.aicp-rom.com/job/android/26501/console
Thank u for hardwork and we proud that still note 2 development is on.
Sent from my SM-G920F using Tapatalk
tilaksidduram said:
The reason for this is proximity sensor is not fully working. I am looking into this issue currently.
Click to expand...
Click to collapse
waiting proximity sensor working fully.wait for next fixed.
Trafalgar Square said:
Hi,
the build is talking with CyanogenMod kernel: http://jenkins.aicp-rom.com/job/android/26501/console
Click to expand...
Click to collapse
what does that means? (apologies for my ignorance)
My LuisROM based on cdDroid V6.x for Oneplus 5T (dumpling)
Code:
*** Disclamer
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is my personal custom rom. LuisROM based on the crDroid, LineageOS and other...
This is a ROM that works on Oneplus 5T (dumpling) snapdrgon only! This ROM comes with a highly-customized kernel, as well as some other very custom modifications.
I will NOT provide support if you install a custom kernel!
Changelogs: http://luis-builds.de/downloads/lineageos/cr/oneplus5t/changelog_dumpling.txt
Introduction
Hello Friends!
I had troubles to find current builds for my devices so I decided to make regular builds for my devices. When my friends told me about similar problems, I extended the builds to include their devices as well. So these builds were and are mainly for my friends and me, but I finally decided to provide them also for public download.
My ROMs
My LuisROM an awesome combination of performance, customization, power and the most new features, brought directly to your device. The LuisROM build server generates automaticly every 2nd days new builds directly from the sources.
Notice
Sometimes I get a lot of help or feature requests from users of my LuisROMs. My dog Luis and I try to fulfill most of the wishes, but that is not always possible. I do that as a little hobby and Luis does not always want to build ROMs . Please understand if I can not always answer directly.
ROM features:
Based on the latest cdDroid V6.x (Android 10), LineageOS and AOSP sources
Latest security patches and sources
OTA Updater
Compatible with EX Kernel Manager
Many other misc. performance and stability improvements under the hood
Kernel: Linux 4.4.x Kernel with many mods other devs and me (thanks for your incredible work!)
Removed lots of excessive bloat (improves security and performance)
Improved stability (several bugs not listed here have been fixed)
Boeffla Wakelock blocker driver V1.1.0
More I/O-Schedulers (fiops, sio, zen, maple)
Optimized for performance and battery life
Compatible with systemless root (recommend Magisk 20.x !!!)
Many other misc. improvements not listed here
Installation instructions:
Pre-installation:
TWRP Recovery of course (download here)
Tested with Oxygen OS 9.0.10 firmware. (download here)
Magisk 20.x and above (Link) can also be used just make sure you flash it after a first successful boot (after passed setup screen)
First time installation:
Unlock your bootloader
Install lates Oxygen firmware (tested 9.0.10)
Flash recovery zip (TWRP)
Flash my latest LuisROM (download here)
Optional: Flash Open GApps and Magisk 20.x and above
Reboot and enjoy
OTA App update installation (auto):
Go to crDroid > About cdDroid > Updates
Press reload button (right corner)
Select download on the new build list
After download select update/flash new build
Optional: Installed gapps and magisk will be moved into new system automaticaly !
TWRP update installation (manual):
Download latest LuisROM build (download here)
Boot into Recovery TWRP
Flash my updated LuisROM (download here)
Reboot and enjoy
Download
Latest builds: (http://luis-builds.de/downloads/lineageos/cr/oneplus5t/)
Latest Oxygen firmware: (download)
My other devices/ROMs: (http://luis-builds.de/downloads/lineageos/)
Download OpenGapps: (http://opengapps.org)
Flash latest TWRP Recovery: (download here)
Donate for my dog Luis, he is looking forward to an extra bone:
https://bw2.link/LuisDonation
Changelog
Developer: http://luis-builds.de/downloads/lineageos/cr/oneplus5t/changelog_dumpling.txt
Known Issus
..
Telegram group:
https://t.me/rr_luisrom
Thanks To/Credits
Special thanks to Teams:
LineageOS team: https://www.lineageos.org
crDroid Team: https://crdroid.net/
OMNI team https://omnirom.org/about/
SLIMROMS https://slimroms.org/#/about
topjohnwu (Magisk) https://forum.xda-developers.com/apps/magisk
Thanks to the best devs on earth:
LuK1337 (https://forum.xda-developers.com/member.php?u=5075128)
PeterCxy (https://forum.xda-developers.com/member.php?u=5351691)
francokernel (https://forum.xda-developers.com/member.php?u=3292224)
sultanxda (https://forum.xda-developers.com/member.php?u=4800121)
flar2 (https://forum.xda-developers.com/member.php?u=4684315)
nathanchance (https://forum.xda-developers.com/member.php?u=6842057)
zx2c4 for the wireguard vpn ROM Integration (https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635)
phhusson for some blobs (https://github.com/phhusson)
and of course to all the supporters.
Thanks for the Sources/Blobs/Tweaks
crDroid (https://github.com/LineageOS)
Omnirom (https://github.com/omnirom)
TheMuppets (https://github.com/TheMuppets)
neobuddy89 (https://github.com/neobuddy89)
My Sources/Blobs/Tweaks
DEVICE (https://github.com/FraEgg/android_device_oneplus_dumpling)
KERNEL (https://github.com/FraEgg/android_kernel_oneplus_msm8998)
XDA:DevDB Information
[ROM][OP5T][10]LuisROM Android 10 based on crDroid V6.x [DUMPLING], ROM for the OnePlus 5T
Contributors
8224Freak
Source Code: Source Link: https://github.com/FraEgg
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: 9.0.11
Based On: LineageOS, crDroid, AOSP
Version Information
Status: Beta
Beta Release Date: 2020-03-24
Created 2020-01-26
Last Updated 2020-03-24
Reserved
Huge request to add TTL fixation support to the kernel
Thanks for the ROM!
But I have problem after flash your ROM. I'm stuck at setup wizard, my carrier not detected (Indonesia carrier network, already tried to remove then insert sim card again but still no luck). And at wifi setup it still searching and won't find any network (I have excellent wifi network here and detected with other ROM).
EDIT : after following flashing order by @sant03 now this rom running flawlessly on my 5t. very smooth and nearly haven't facing fps drop on gaming. thanks a lot @8224Freak !
wahing said:
Thanks for the ROM!
But I have problem after flash your ROM. I'm stuck at setup wizard, my carrier not detected (Indonesia carrier network, already tried to remove then insert sim card again but still no luck). And at wifi setup it still searching and won't find any network (I have excellent wifi network here and detected with other ROM).
Click to expand...
Click to collapse
Hi,
Pls check your firmware.
Cu Frank
8224Freak said:
Hi,
Pls check your firmware.
Cu Frank
Click to expand...
Click to collapse
i already flashed firmware 9.0.10 before flash the rom.
and the previous rom i used was OOS 9.0.10
wahing said:
i already flashed firmware 9.0.10 before flash the rom.
and the previous rom i used was OOS 9.0.10
Click to expand...
Click to collapse
I too came from OOS 9.0.10, NO issues here. Very smooth Rom.
hmm i think i know the problem, just notice the magisk point in pre install section.
so i assume the flashing order is :
1. flash rom
2. flash gapps
3. reboot
4. after successufully boot into OS and setup, then go back to recovery to install magisk
isn't it?
wahing said:
hmm i think i know the problem, just notice the magisk point in pre install section.
so i assume the flashing order is :
1. flash rom
2. flash gapps
3. reboot
4. after successufully boot into OS and setup, then go back to recovery to install magisk
isn't it?
Click to expand...
Click to collapse
That's what I did
[email protected] said:
Huge request to add TTL fixation support to the kernel
Click to expand...
Click to collapse
Done! Looking for the next builds...
Cu Frank
8224Freak said:
Done! Looking for the next builds...
Cu Frank
Click to expand...
Click to collapse
Type in the next kernel will already have support? And can I put me on the off version?
Does this ROM have the System Profiles like crDroid V5 does? That's a very useful feature I missed when I upgraded to other Android 10 ROMs, which is why I downgraded.
sant03 said:
That's what I did
Click to expand...
Click to collapse
alright, i'll try tomorrow. thank you so much!
Any plans for mirrors???......download speed very poor from given source, 2+ hours......:crying:
I can t find 9 .0.10 firmware in sourceforge,only 9.0.9.
Anybody can help with this or post another link?
broky said:
I can t find 9 .0.10 firmware in sourceforge,only 9.0.9.
Anybody can help with this or post another link?
Click to expand...
Click to collapse
here you go:
https://forum.xda-developers.com/showthread.php?t=3728665&p=81425595
Tnx for your hard.work
Thanks!!.. Great rom
I found a bug, when using the system profiles option the phone restarts
Enviado desde mi ONEPLUS A5010 mediante Tapatalk
Thanks for building to 5T. Are you skipping Resurrection Remix OS for Android 19 now? I've been a fan of those roms for several devices much because of the possibility to edit navbar behavior.
i found another issue, double tap to wake somtimes didnt work.
ProjektEva presents Eva Kernel
Code:
**DISCLAIMER**
Flash this kernel at your own risk. Do not blame me if you did something
wrong whilst flashing this kernel. I will not accept any blame for MODs
that may have caused any instability to your device.
Its only bringup of m_vaisakh ProjektEve EAS kernel for Montana. Every credits please send to m_vaisakh.
Features of the kernel:
1. EAS:
Code:
* Energy Aware Scheduling
* Ainur DTS Eagle Sound Engine
* SchedUtil Governor by default
* Latest Motorola 3.18 Changes
* recalculated msm8937 sched energy costs
* Better GCam Focus
* KCAL MDSS Color Configuration
2. Non-EAS:
Code:
* Ainur DTS Eagle Sound Engine
* Latest Motorola 3.18 Changes
* Zen I/O Scheduler
* Better GCam Focus
* KCAL MDSS color configuration
Flash it on any Pie.
NOTE:This kernel will not work with Stock rom (Because it is 64bit), It will work with treble and nontreble roms.
Downloads:
All Downloads will be available on the m_vaisakh github releases on the kernel Source or montana official sourceforge project.
DOWNLOAD flashable zip here.
Install:-Choose treble or nontreble version. If you don't know which one use, ask on ROM thread or test both and check which one boot. Remember to make backup!
-Flash zip or .img file using twrp recovery or for example FrankoKernelManager.
Supported roms:
- LineageOS 16.0 (treble)
- DirtyUnicorn (nontreble)
- PixelExperience (nontreble)
- Ressurection Remix (non treble)
- any GSI (treble)
- <wait for testers to check on other roms>
XDA:DevDB Information
[KERNEL][EAS][Android PIE] Eva Kernel | ProjektEva, Kernel for the Moto G5S
Contributors
wiktorek140, m_vaisakh, SohamLad7
Source Code: https://github.com/mvaisakh/eva_kernel
Kernel Special Features: Energy Aware Scheduling + Non-Energy Aware Scheduling
Version Information
Status: Stable
Current Stable Version: 3.0+EAS
Stable Release Date: 2020-04-12
Created 2020-04-12
Last Updated 2020-04-12
Eva EAS+ 2.0 Release
Changelog:
>Major CAF upstream (Over 400+ commits merged)
>MDSS upstream
>Tsens upstream (Better thermals)
>Some specific backports from android kernel common
Eva EAS+ 3.0 Release
Changelog:
>Optimised a lot of code
>Better LMK
>Scheduling improvements
>Enabled Ultra Low Power Mode for all panels.
>Realtime scheduling when hotplugging.
Just installed it, it is working so far.
But there is an odd message just after boot saying there's a problem with the phone (one of Jarlpenguin build's had the same issue for a moment).
Dan Mornill said:
Just installed it, it is working so far.
But there is an odd message just after boot saying there's a problem with the phone (one of Jarlpenguin build's had the same issue for a moment).
Click to expand...
Click to collapse
Its not that high cost of better performance. Will take care of it when i have time
I noticed a better battery life and a possibility to dim screen on kernel settings, which is nice. Thanks for your working on it.
Updated thread description.
Added proper download link.
Added support to non-treble roms.
wiktorek140 said:
Updated thread description.
Added proper download link.
Added support to non-treble roms.
Click to expand...
Click to collapse
Thanx!
FYI the nontreble version sends my device in a bootloop on your lineage 16 build. The previous boot.img worked, so I assume that was build for treble.. (I was under the impression that development for treble had ceased)
Ænimal said:
Thanx!
FYI the nontreble version sends my device in a bootloop on your lineage 16 build. The previous boot.img worked, so I assume that was build for treble.. (I was under the impression that development for treble had ceased)
Click to expand...
Click to collapse
The current lineage 16 builds are treble, everything else isn't (Gsi images installed on top of Lineage 16 also count as treble)
Post updated. Added new compatibile rom and GSI to list
I installed lineageos 16.0 (jarl version) with the treble kernel and everything is working perfectly, however an error message appears whenever you turn on or restart the device:
"There is an internal problem with your device. Please contact the manufacturer for more details."
Thanks
samuelrafo said:
I installed lineageos 16.0 (jarl version) with the treble kernel and everything is working perfectly, however an error message appears whenever you turn on or restart the device:
"There is an internal problem with your device. Please contact the manufacturer for more details."
Thanks
Click to expand...
Click to collapse
Duplicate, im aware of that. Will be fixed in future
After a few days of use, I can tell there is a very nice improvement on battery life ??
wiktorek140 said:
ProjektEva presents Eva Kernel
Version Information
Status: Stable
Current Stable Version: 3.0+EAS
Stable Release Date: 2020-04-12
Created 2020-04-12
Last Updated 2020-04-12
Click to expand...
Click to collapse
Installed this with nontreble version on Havoc-os 2.9 + microg. + magisk with no issues that I've noticed.
Does it works with Lineage 15 build too?
newinnov said:
Does it works with Lineage 15 build too?
Click to expand...
Click to collapse
Nope, Android P only
newinnov said:
Does it works with Lineage 15 build too?
Click to expand...
Click to collapse
If you know how, you can always test it itself. Just make backup before and write result if u try
wiktorek140 said:
If you know how, you can always test it itself. Just make backup before and write result if u try
Click to expand...
Click to collapse
Lineage 8.1 works fine with non-treble version.
Also, Version 3.0 has some random reboot bugs, so original developer has reverted this kernel to "EvaEAS+-1.2+-cedric.hotfix.zip" Release: 2020-05-07
Zero reboot with this kernel on my XT1794 and latest lineage build
New update to EVA kernel!
Avaiable to download from link in main post. Build with date 20200510 at end.
Available for treble and nontreble build. Should support rom mentioned in main post.
Changelog:
- tweaks in vidc
- compiled using GCC 9.3
- added preset cpu efficiency
- fixed Internal Error message on boot
New UPDATE.
Link available in main post.
Download version with 20200511 date at end of file name.
Changelog:
- minor nfc fixes
- fixed front flash