ProjektEva presents Eva Kernel
Code:
**DISCLAIMER**
Flash this kernel at your own risk. Do not blame me if you did something
wrong whilst flashing this kernel. I will not accept any blame for MODs
that may have caused any instability to your device.
Its only bringup of m_vaisakh ProjektEve EAS kernel for Montana. Every credits please send to m_vaisakh.
Features of the kernel:
1. EAS:
Code:
* Energy Aware Scheduling
* Ainur DTS Eagle Sound Engine
* SchedUtil Governor by default
* Latest Motorola 3.18 Changes
* recalculated msm8937 sched energy costs
* Better GCam Focus
* KCAL MDSS Color Configuration
2. Non-EAS:
Code:
* Ainur DTS Eagle Sound Engine
* Latest Motorola 3.18 Changes
* Zen I/O Scheduler
* Better GCam Focus
* KCAL MDSS color configuration
Flash it on any Pie.
NOTE:This kernel will not work with Stock rom (Because it is 64bit), It will work with treble and nontreble roms.
Downloads:
All Downloads will be available on the m_vaisakh github releases on the kernel Source or montana official sourceforge project.
DOWNLOAD flashable zip here.
Install:-Choose treble or nontreble version. If you don't know which one use, ask on ROM thread or test both and check which one boot. Remember to make backup!
-Flash zip or .img file using twrp recovery or for example FrankoKernelManager.
Supported roms:
- LineageOS 16.0 (treble)
- DirtyUnicorn (nontreble)
- PixelExperience (nontreble)
- Ressurection Remix (non treble)
- any GSI (treble)
- <wait for testers to check on other roms>
XDA:DevDB Information
[KERNEL][EAS][Android PIE] Eva Kernel | ProjektEva, Kernel for the Moto G5S
Contributors
wiktorek140, m_vaisakh, SohamLad7
Source Code: https://github.com/mvaisakh/eva_kernel
Kernel Special Features: Energy Aware Scheduling + Non-Energy Aware Scheduling
Version Information
Status: Stable
Current Stable Version: 3.0+EAS
Stable Release Date: 2020-04-12
Created 2020-04-12
Last Updated 2020-04-12
Eva EAS+ 2.0 Release
Changelog:
>Major CAF upstream (Over 400+ commits merged)
>MDSS upstream
>Tsens upstream (Better thermals)
>Some specific backports from android kernel common
Eva EAS+ 3.0 Release
Changelog:
>Optimised a lot of code
>Better LMK
>Scheduling improvements
>Enabled Ultra Low Power Mode for all panels.
>Realtime scheduling when hotplugging.
Just installed it, it is working so far.
But there is an odd message just after boot saying there's a problem with the phone (one of Jarlpenguin build's had the same issue for a moment).
Dan Mornill said:
Just installed it, it is working so far.
But there is an odd message just after boot saying there's a problem with the phone (one of Jarlpenguin build's had the same issue for a moment).
Click to expand...
Click to collapse
Its not that high cost of better performance. Will take care of it when i have time
I noticed a better battery life and a possibility to dim screen on kernel settings, which is nice. Thanks for your working on it.
Updated thread description.
Added proper download link.
Added support to non-treble roms.
wiktorek140 said:
Updated thread description.
Added proper download link.
Added support to non-treble roms.
Click to expand...
Click to collapse
Thanx!
FYI the nontreble version sends my device in a bootloop on your lineage 16 build. The previous boot.img worked, so I assume that was build for treble.. (I was under the impression that development for treble had ceased)
Ænimal said:
Thanx!
FYI the nontreble version sends my device in a bootloop on your lineage 16 build. The previous boot.img worked, so I assume that was build for treble.. (I was under the impression that development for treble had ceased)
Click to expand...
Click to collapse
The current lineage 16 builds are treble, everything else isn't (Gsi images installed on top of Lineage 16 also count as treble)
Post updated. Added new compatibile rom and GSI to list
I installed lineageos 16.0 (jarl version) with the treble kernel and everything is working perfectly, however an error message appears whenever you turn on or restart the device:
"There is an internal problem with your device. Please contact the manufacturer for more details."
Thanks
samuelrafo said:
I installed lineageos 16.0 (jarl version) with the treble kernel and everything is working perfectly, however an error message appears whenever you turn on or restart the device:
"There is an internal problem with your device. Please contact the manufacturer for more details."
Thanks
Click to expand...
Click to collapse
Duplicate, im aware of that. Will be fixed in future
After a few days of use, I can tell there is a very nice improvement on battery life ??
wiktorek140 said:
ProjektEva presents Eva Kernel
Version Information
Status: Stable
Current Stable Version: 3.0+EAS
Stable Release Date: 2020-04-12
Created 2020-04-12
Last Updated 2020-04-12
Click to expand...
Click to collapse
Installed this with nontreble version on Havoc-os 2.9 + microg. + magisk with no issues that I've noticed.
Does it works with Lineage 15 build too?
newinnov said:
Does it works with Lineage 15 build too?
Click to expand...
Click to collapse
Nope, Android P only
newinnov said:
Does it works with Lineage 15 build too?
Click to expand...
Click to collapse
If you know how, you can always test it itself. Just make backup before and write result if u try
wiktorek140 said:
If you know how, you can always test it itself. Just make backup before and write result if u try
Click to expand...
Click to collapse
Lineage 8.1 works fine with non-treble version.
Also, Version 3.0 has some random reboot bugs, so original developer has reverted this kernel to "EvaEAS+-1.2+-cedric.hotfix.zip" Release: 2020-05-07
Zero reboot with this kernel on my XT1794 and latest lineage build
New update to EVA kernel!
Avaiable to download from link in main post. Build with date 20200510 at end.
Available for treble and nontreble build. Should support rom mentioned in main post.
Changelog:
- tweaks in vidc
- compiled using GCC 9.3
- added preset cpu efficiency
- fixed Internal Error message on boot
New UPDATE.
Link available in main post.
Download version with 20200511 date at end of file name.
Changelog:
- minor nfc fixes
- fixed front flash
Related
LineageOS is a free, community built, aftermarket firmware distribution of Android 5.1.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Installation:
1. Download ROM and copy it onto device
2. Extract boot.img from ROM zip file onto your PC desktop.
3. Connect USB cable to PC.
4. Power off the device and hold Volume+ while connecting other end of USB cable to device. (This will boot device into fastboot mode).
5. Flash the extracted boot.img onto device.
6. Power on the device and start pressing Power Button to boot into Recovery.
7. Wipe System, Data, Cache, Dalvik cache. (DO NOT WIPE SD CARD THERE IS STORED THE ROM FILE).
8. Install the ROM.
9. Reboot and enjoy (First boot can take few minutes be patient please.).
10. (Optional) Download and flash GApps. (This will install Google Play and other Google Apps).
LINK:
Source Code:
CBNUKE: CBNUKE Github
Haxk20: Haxk20 Github
XperiaSTE: XperiaSTE Github
ROM: LineageOS NYPON Build
Feedback:
Feedback is always welcome.
Before posting bug please be sure that you did clean install of ROM and that you post log file with bug report and make the bug report full reported.
Thanks To:
frap129 for Spectrum
Not working List:
1. A2DP (Wont be fixed, Calls works OK)
2. Wifi direct.
3. Video Recording
4. NFC
5. HDMI
6. FM Radio
XDA:DevDB Information
LineageOS for Xperia P [Nypon], ROM for the Sony Xperia P
Contributors
Haxk20, AOSX , XperiaSTE, CBNUKE, munjeni, Agontuk And BlueZ Team
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: TWRP Recovery, Unlocked Bootloader
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: lineage-12.1-2017073
Beta Release Date: 2017-07-30
Created 2017-07-30
Last Updated 2019-10-27
Features and Issues
Code:
- Boot : Ok
- GApps : OpenGApps Micro recommended
- Partitions (Data, Cache) : Ext4 and F2FS supported
- Bluetooth : Ok
- WiFi : Ok
- WiFi Hotspot : Not tested but should work
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Not working
- Lights : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- Sensors : Ok
- Touchscreen : Ok
- FM Radio : (Probably)Not working
- Vibrator : Ok
- Microphone : Ok
- Audio & music : Ok
- Bluetooth audio : Not working
- NFC : Not working
- Kernel : Ok
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Ok
- USB : Ok
- USB OTG : Ok
- Encryption : Not tested
- SEPolicies : Enforcing
Changelog
Code:
Date: 2017-07-30
- Initial Build
- If you are using English language you will see in settings LineageOS version instead of CyanogenMod. (This was added by me).
Date: 2017-07-31
-Added LineageOS boot animation
Date: 2017-08-01
Nothing just build a ROM in few days will not be a builds i will switch toolchain to linaro the will post daily again.
Date: 2017-08-05
Build with Linaro toolchain 4.9. My reaction to it when i was testing it WOOOOOW thats fast.
Date: 2017-08-08
Added new ADB icon (Lineage)
Added new CM easter egg (Lineage)
Updated kernel to Newer version
Date: 2017-08-11
Nothing just build a rom and tried to fix camera recording but without luck
Date: 2017-08-21
Nothing new just new build uploaded to new File Hosting
Thankyou for your efforts.
I'll try and post some screenshots
UmairSaifullah said:
Thankyou for your efforts.
I'll try and post some screenshots
Click to expand...
Click to collapse
Thanks i forgot screenshots it would be perfect if you post some Thanks.
ss.
looks almost same.
first time boot shows cyanogenmod welcome screen
and when you tap on lineageos version you get the cyanogenmod egg
UmairSaifullah said:
ss.
looks almost same.
first time boot shows cyanogenmod welcome screen
and when you tap on lineageos version you get the cyanogenmod egg
Click to expand...
Click to collapse
Yes i know i will try to do something about that but i cannot say for sure because lineage will not support cm12.1 and not even those ui changes.
How long is the boot time for you ?
well i cannot
UmairSaifullah said:
ss.
looks almost same.
first time boot shows cyanogenmod welcome screen
and when you tap on lineageos version you get the cyanogenmod egg
Click to expand...
Click to collapse
well its like this i cannot change that easter egg since 6.0 lineage have removed custom egg and well 7.1 have .xml files instead of .png
and the same applies to SetupWizard app i even tried to build using the .xml files and failed to build because its too modified Im sorry but well if anybody from LineageOS Developers can update the cm-12.1 branch and change it to lineageOS rebrand it would be great but without that we are stuck at CM logos. :crying::crying::crying::crying::crying:
And i think creating new logo for this rom with Lineage name in it is probably illegal yeah if i use it for my own use sure its ok but im publishing this ROM so i cannot do that too.
I'm trying to get linaro toolchain working on this device to take the lastl drop of performance out of this ROM so it will take maybe a week or less don't know but will be great if I make linaro usable cause as I heard it gives great performance. So hopefully I will include it in next build but I'm not 100% sure.
New build up please let me know if anybody found any bug this is build using linaro toolchain and i haent tested all thing on it so if you found anything please let me know and guys its FASTTTTTT.
Edit: If anybody can please test the ROM with some benchmarking tool and compare it to the 2017-08-01 build result i really want to know how much faster the ROM is Thanks.
Haxk20 said:
New build up please let me know if anybody found any bug this is build using linaro toolchain and i haent tested all thing on it so if you found anything please let me know and guys its FASTTTTTT.
Edit: If anybody can please test the ROM with some benchmarking tool and compare it to the 2017-08-01 build result i really want to know how much faster the ROM is Thanks.
Click to expand...
Click to collapse
antutu benchmark for your build 2017-08-05 : 8550
CBNUKE build 2016-10-02 : 10005
fafaremi said:
antutu benchmark for your build 2017-08-05 : 8550
CBNUKE build 2016-10-02 : 10005
Click to expand...
Click to collapse
Uuuu that's not so good can you test my build with normal toolchain ? That is 2017-08-01 and we're both test runner on clean flash of both ROMs ? Or you had some apps installed ?
But thanks for info at least I know that performance is number one
Build will not be coming out at sundays so next build at Monday with marshmallow kernel. Hopefully if not marshmallow then the latest I can find.
fafaremi said:
antutu benchmark for your build 2017-08-05 : 8550
CBNUKE build 2016-10-02 : 10005
Click to expand...
Click to collapse
Can you please test the 2017-08-01 build and post score here ? Wanna to see If linaro even had some good effect.
Haxk20 said:
Can you please test the 2017-08-01 build and post score here ? Wanna to see If linaro even had some good effect.
Click to expand...
Click to collapse
Link for download this build?
fafaremi said:
Link for download this build?
Click to expand...
Click to collapse
will post tomorrow
antutu benchmark for your build 2017-08-05: 10080 Clean flashed
antutu benchmark for your build 2017-08-01: 10021 Clean Flashed
antutu benchmark for your build 2017-08-05: 12061 Dirty flashed over 2017-08-01 build.
Note: Numbers are approximate because i dont remember the whole numbers ill post screenshots later.
Thats good score
UmairSaifullah said:
antutu benchmark for your build 2017-08-05: 10080 Clean flashed
antutu benchmark for your build 2017-08-01: 10021 Clean Flashed
antutu benchmark for your build 2017-08-05: 12061 Dirty flashed over 2017-08-01 build.
Note: Numbers are approximate because i dont remember the whole numbers ill post screenshots later.
Click to expand...
Click to collapse
Yeah i like that score a lot more then 8550 thank you for testing the builds i see that linaro did little improvment its small but its surely there Thank you.
fafaremi said:
Link for download this build?
Click to expand...
Click to collapse
here is link for 2017-08-01 build i want to see score that you get Thank you.
Build 2017-08-01
Result 10614 Build 2017-08-01
Result 12153 Build 2017-08-05 Dirty Flashed over previous build with gapps
Result 10705 Build 2017-08-05 Clean Flashed.
Result 12099 Build 2017-08-05 Dirty Flashed over previous build without gapps
ALIZE KERNEL FOR STOCK/NOUGAT
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Here is the thread for the Oreo variant ALIZE KERNEL FOR OREO :good:
Introduction:
The main objective of the kernel is to give to any user, a stock kernel with some tweaks like new CPU govenor focused on battery, performance and both of them, I/O scheduler, ...
Click to expand...
Click to collapse
Features:
Updated to lastest Motorola source
Kernel upstreamed to lastest source (3.18.89) compiled with Linaro-7.2
Boeffla Wl Blocker
Maple I/O sched
Frandom for random number
Wakeup boosted (time in milliseconds instead of seconds)
CRC check disabled (Performance boosted)
Vibration control
Sound control
Kcal support
Backlight dimmer
Fsync support
Safetynet patch
Makefile: -0fast, -O3 and Graphite optimizations
LZ4 compression (instead of XZ)*
Faster boot (higher read_ahead size for bootup)
All feature of the boulzordev's kernel
Many other tweaks (check github)
Some of these features is not yet added in the Stock variant.
Click to expand...
Click to collapse
Download (Nougat LOS-AOSP based)
**Nougat(V42 - WITH NEW GESTURES ONLY)**
Download: https://sourceforge.net/projects/alize/files/Nougat/AlizeR-7.x_v42.zip/download
Changelog: https://github.com/Martichou/alize_potter/commits/a7x
Click to expand...
Click to collapse
**Stock(V110)**
Download: https://sourceforge.net/projects/alize/files/Stock/Alize-stock_v110.zip/download
Be careful, stock variant will ONLY work on very LASTEST version of the ROM.
See below
Some known version which work:
- Retus: 137-83
- Retin: 137-67-5
- Retmx: 137-78-4
- Stock deodexed
But these are not exhaustive!
This one don't work:
- Retus: 137-43-5
Click to expand...
Click to collapse
How to flash:
1. Download Alize for Potter
2. Reboot to recovery
3. Flash kernel's zip
4. Reboot and tweak with proper app (Kernel auditor, Ex kernel manager, ...)
Click to expand...
Click to collapse
*Learn more about LZ4
- https://events.linuxfoundation.org/sites/events/files/lcjpcojp13_klee.pdf
- http://catchchallenger.first-world.info/wiki/Quick_Benchmark:_Gzip_vs_Bzip2_vs_LZMA_vs_XZ_vs_LZ4_vs_LZO
TELEGRAM GROUP:
https://t.me/joinchat/EWMwLkNn0rIRNNctA75U3A
Credits:
Lineage Team
Acuicultor
Vache (for source and Oreo, and so many things)
fAiyaZ (for upstreamed the kernel from .32 to .61 and more things)
And many other.. (PM if you want me to add you.)
XDA:DevDB Information
ALIZE, Kernel for the Moto G5 Plus
Contributors
Martichou
Source Code: https://github.com/Martichou/alize_potter/
Kernel Special Features:
Version Information
Status: Stable
Created 2017-11-06
Last Updated 2017-12-24
As there aren't any official Oreo roms for this model I assume your kernel works with Lineage 15
Good work bro
Muchoaliento said:
As there aren't any official Oreo roms for this model I assume your kernel works with Lineage 15
Click to expand...
Click to collapse
There is lots of Oreo rom available.
Between this thread is only for Nougat or Stock rom.
And yes, my Oreo variant work on LOS15.
Good kernel bro .Keep it up
Witch one is needed for Validus rom latest version?
cdfreak said:
Witch one is needed for Validus rom latest version?
Click to expand...
Click to collapse
If it's Oreo, then there is the other thread.
If it's nougat, take the nougat version.. you're not on stock so it's not difficult to know.
I switched from Androidfilehost to Sourceforge as some users faced lots of bugs with AFH.
New build is up! (ALIZE KERNEL - Potter)
*General changes:*
- Upstreamed to .81
- Switch for GENTLE_FAIR_SLEEPERS
- Check github for more
**Nougat (V44 without new gestures)**
https://sourceforge.net/projects/alize/files/Nougat/Alize-7.x_v44.zip/download
**Nougat (V44 with new gestures)**
https://sourceforge.net/projects/alize/files/Nougat/Alize-7.x_v44_gestures.zip/download
Are u going to keep updating?
fr3d0x said:
Are u going to keep updating?
Click to expand...
Click to collapse
join the telegram group - He is working all the time
how to recompile this kernel after upstream... i had successfully upstream the kernel source with latest patches and few fixes...
now i need to compile it for moto g5 plus..
please help me and give full proceedure to perform this operation. Thankyou
I just started using latest aokp. How would I know if it has "new Gestures"?
Sent from my XT1687 using Tapatalk
buggerritt said:
I just started using latest aokp. How would I know if it has "new Gestures"?
Sent from my XT1687 using Tapatalk
Click to expand...
Click to collapse
It has
New build is up !
Rebased
V42
https://sourceforge.net/projects/alize/files/Nougat/AlizeR-7.x_v42.zip/download
OP requested thread to be closed.
HTML5 KERNEL
"Low overhead, light and the way of the future" - sultanxda
(he wasn't referring to this but whatever)
This Kernel aims to be as simple as possible with only useful added features, you may request for features and we will consider them.
Features:
Compiled with GCC (cuz clang sucks)
Removed unnecessary bloat
Reduced power consumption
Improved zRAM and memory management
Upstreamed to the latest Linux 4.9 stable (based off ALS)
First kernel with touchscreen in TWRP fixed
Some cool patches
A lot of less cool patches
Magisk support
Westwood+ is now the default tcp algorithm
Brickported Backported patches from Sony, CAF and others
refer to the source for the rest I am lazy
TLDR:
It's better than stock and the best custom kernel out there (arguable)
Links:
Downloads
Telegram group
note: the zip is a flashable anykernel zip.
XDA:DevDB Information
HTML5 Kernel, Kernel for the Google Pixel 3
Contributors
ab123321, _LLJY
Source Code: https://github.com/bluecross-dev/kernel_msm-4.9
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 210
Stable Release Date: 2019-11-15
Created 2019-05-17
Last Updated 2019-11-15
HTML5 kernel v137
TL;DR: Download
Join our Telegram group if you want more frequent kernel updates
Yet another stable update! (that I did not even test)
This build is the final release supporting Android 9.0 Pie, next versions are going to support Android Q exclusively.
Brief changelog:
Merged Q beta 4 tag (also supposedly fixes rare live photo crash)
Updated to Linux 4.9.181
Various scheduler and cpuidle updates
Further vmalloc enhancements
Other minor changes
does this work on the Q beta?
Agree, this is the best kennel
Still no luck in running this kernel on stock Android 10 (blueline-qp1a.191005.007-factory-c36610c6). Version HTML5_137 brings bootloop (fastboot tells "error boot prepare" message).
NEW MAJOR UPDATE: v210
Now, with Android 10 support! A lot of work has been done since the last update, ehehh... yes, we still exist
I suck at coming up with huge placebo changelogs, so just believe me at that statement
Follow the link and flash dis new build right away (if you still haven't lost your patience): Download
Will this work on havoc os 3.0?
crankiro97 said:
Will this work on havoc os 3.0?
Click to expand...
Click to collapse
It should if it is Android 10
ab123321 said:
It should if it is Android 10
Click to expand...
Click to collapse
Ok, since TWRP is not working in A10, how do you install it?
crankiro97 said:
Ok, since TWRP is not working in A10, how do you install it?
Click to expand...
Click to collapse
Flash through FKM or EXKM.
xFirefly93 said:
Flash through FKM or EXKM.
Click to expand...
Click to collapse
Thanks, that worked. Flashed it with FKM.
Code:
*** Disclaimer ***
I am not responsible for bricked devices, dead SD cards,
thermonuclear war or you getting fired because the alarm
app failed. Please do some research if you have any
concerns about features included in this Kernel before
flashing it! YOU are choosing to make these modifications,
and if you blame me in any way for what happens to your
device, I will laugh at you.
* BOOM! * goes the dynamite. :D
Introduction
Hello everyone, this is my personal kernel for the Poco(phone) F1.
First-off, I am not a superstar kernel developer, I'm just trying to build a kernel out of clean AOSP/LOS sources that has only the necessary features without bloating it with unnecessary stuff.
TL;DR
This Kernel is going to be a combination of Clean Source + Awesome Features of other kernels out here (NOTE: If there's something cool, maybe I'll be cherry-picking it. :silly:
Goal: Achieve Max. Performance and Balance Battery Life with Stability in mind.
Hopefully you'll enjoy!
THE KERNEL IS IN IT EARLY STAGES, WITHOUT MUCH FEATURES. MORE OPTIMIZATIONS AND FEATURES COMING!
Note: Ported ROMs like OOS and MiRoom are know to have issues and isn't supported by me!
Click to expand...
Click to collapse
Features
- Built with latest Clang using -O3 optimization flag
- Using CONFIG_HZ = 300 (there by changing context switching interval from 10ms to 3.33ms for fewer jitters)
- Upstreamed to latest Linux Stable (4.9.211)
- Fully merged latest CAF Tag (LA.UM.8.3.r1-07100-sdm845.0)
- Google Common Kernel Commits cherry-picked
- Picked changes from Xiaomi's source
- Latest CAF Audio & Wi-Fi drivers
- Latest (or best) Xiaomi Touch Drivers (NVT:9.1.24 / FTS:10.3.7.0) (You are free to suggest if something else is better)
- Enabled ULPS (Ultra Low Power State) for panels
- Using Power Efficient Workqueue
- Scheduler Stune Boost
- GPU UC to 180MHz & OC to 820MHz
Available GPU Freq.: [180], 257, 350, 425, 520, 600, 675, 710, [820]
- Enabled NAP power saving state for Adreno 630 GPU
- Added TCP Cong. Alg.: [westwood], bic, vegas, yeah, illinois
- Added fsync on/off support
- Added support for DTS Ultra:X
- Camera fix (for Q-Blobs)
- Added Wireguard support (latestL 0.0.20200128)
- Added TTL Tethering Fix (ziozzang)
I'll consider your feature requests if you share a commit / kernel that has the feature.
Other suggestion to make the kernel beter are welcome too..
Consider joining the Telegram Group (where I am most active). [The group is very new and empty as of now]
The Kernel will receive regular updates whenever there's new Linux Stable / CAF Tag.
Installation Instructions
* Dirty Flash your current ROM zip (IMPORTANT if you are coming from another kernel)
* Flash Kernel zip
* Wipe Cache / Dalvik (optional)
Download
Download Delta Kernel
FAQ
Q. Which ROM/Android Version does it support?
A. It is tested and works on any Android 10 ROM.
(Haven't tested on OOS, but it should work)
Click to expand...
Click to collapse
Thanks To
* nathanchance - for android-linux-stable
* osm0sis - for AnyKernel3
* every single Kernel Developers (Poco especially) that I might have/will be cherry-picked(ing) from.
XDA:DevDB Information
Delta Kernel, Kernel for the Xiaomi Poco F1
Contributors
StaticBlaze
Source Code: https://github.com/P1N2O/android_kernel_xiaomi_sdm845
Kernel Special Features:
Version Information
Status: Beta
Created 2020-01-30
Last Updated 2020-01-30
XDA:DevDB Information
Delta, Kernel for the Xiaomi Poco F1
Contributors
StaticBlaze
Source Code: https://github.com/P1N2O/android_kernel_xiaomi_sdm845
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: v0.3
Beta Release Date: 2020-02-06
Created 2020-01-31
Last Updated 2020-02-06
Support miui interface please?
تم الإرسال من POCOPHONE F1 باستخدام Tapatalk
al.iraq said:
Support miui interface please?
تم الإرسال من POCOPHONE F1 باستخدام Tapatalk
Click to expand...
Click to collapse
Working in miui eu based rom ..
Camera not working on latest evo x
revos stable like charm..
Batsy538 said:
Camera not working on latest evo x
Click to expand...
Click to collapse
I've patched Xiaomi's (Q-Blobs) camera fix as all other ROMs will start using Q firmware soon (some ROMs are already using)
If you will add wakelockblock consider pls to add ipa_rm12 to blocklist
spoin64 said:
If you will add wakelockblock consider pls to add ipa_rm12 to blocklist
Click to expand...
Click to collapse
Sure. I'll consider adding it in future versions..
[MINOR UPDATE] Delta Kernel v0.2
Changelog:
- Merged latest Linux Stable 4.9.212
- Merged Latest CAF Tag LA.UM.8.3.r1-07200-sdm845.0
- Added KCAL & K-Lapse v5.0
- Possible Network Signal Guru App fix (might need testing)
- Possible Network Speed showing 0.0Kbps on EU ROM. (might need testing)
Download v0.2 (with camera patch)
Download v0.2 (without camera patch)
al.iraq said:
Support miui interface please?
تم الإرسال من POCOPHONE F1 باستخدام Tapatalk
Click to expand...
Click to collapse
It does work if it is Android 10
hi dev, appreciate your work.
actually i have problem in miroom, cant do fast charge.
any suggestions ?
oh one thing, i got 39 40 degrees while using only social media.
overall, this kernel is beast !!!!
Hutabarat said:
hi dev, appreciate your work.
actually i have problem in miroom, cant do fast charge.
any suggestions ?
oh one thing, i got 39 40 degrees while using only social media.
overall, this kernel is beast !!!!
Click to expand...
Click to collapse
Well, a fix is coming in the next version..
Thanks for the feedback :good:
is this kernel related to malakas
1ey3d0wl said:
is this kernel related to malakas
Click to expand...
Click to collapse
Nope. None..
Related only to AOSP :good:
@StaticBlaze this happens on the latest build
Miui pie supported ??
Allen_05 said:
@StaticBlaze this happens on the latest build
Click to expand...
Click to collapse
Ignore this.
1ey3d0wl said:
Miui pie supported ??
Click to expand...
Click to collapse
As mentioned by the OP is title it supports Android 10. But you can try flashing it and tell if it works for Pie. Just have a backup of your stock boot.img to flash if the zip causes your phone to bootloop.
Allen_05 said:
@StaticBlaze this happens on the latest build
Click to expand...
Click to collapse
Will be fixed in the upcoming version
Link not working
Welcome to Quantic a Kernel built specially for Redmi k30 PRO/ POCO F2 Pro codename: lmi
One of the most used kernel on Custom ROMS on Cepheus chosen by developers and one of the most battery friendly on Redmi k20 Pro community
/* I'm not responsable for any damage on your device, for X or Y reason, also I'm not responsable if you loose your alarm and got fired and also the thermonuclear war, anything like that, installing this kernel you renounce to make me responsable of any unwanted behavior of your device */
/*Compatible ONLY with Android 10*/
Hi everyone, I want to introduce you my new kernel named Quantic-Kernel, this is my personal build kernel with my prefered features. Hope everyone enjoy it and I'll be maintaining it so people can used it with their preferred AOSP ROM(See details below)
FEATURES
Upstreamed CAF to: LA.UM.8.12.r1-10600-sm8250.0
Fixed Camera not working on AOSP ROMs
Reduced logging events
Performance Improvements on scheduler
Enabled ZRAM up to 2GB with lz4 compressor
Upstreamed lz4 compressor
readahead optimizations
Android Binder tweaks
Optimized memory allocations
Reduced kernel weight
Deactivated CAF CPU Boost following MIUI stock kernel parameters
FIX CPU Capacity issues
INSTALLATION PROCEDURE
Make a TWRP backup of BOOT and DTBO partitions
Flash Quantic-Kernel_rX.zip
Reboot to system
Enjoy it
BUGS:
Hostpot may be broken
Works only on ROMS with firmware 12.0.4.0 (check details on Github release)
DOWNLOAD HERE
https://github.com/KONA-DEVS/kernel_xiaomi_sm8250/releases/tag/r2
TELEGRAM CONTACT
https://t.me/Ayrton990 <-- Personal TG
https://t.me/aicplmi <-- Discussion group for support
Thanks List
To kdrag0n
To Kerneltoast
To alk3pInjection
ATTENTION: This KERNEL is NOT based on HiiraKernel, is in construction since early October when I bought the device
SCREENSHOTS ATTACHED BELOW
XDA:DevDB Information
Quantic Kernel, Kernel for the Redmi K30 Pro
Contributors
Ayrton990
Source Code: Github KONA-DEVS
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: r2
Beta Release Date: 2020-11-29
Created 2020-11-22
Last Updated 2020-11-29
Reserved
Another reserved
Hostpot may be broken => I'm waiting when it finish !!!
svzodiac said:
Hostpot may be broken => I'm waiting when it finish !!!
Click to expand...
Click to collapse
what do you mean with that?
Ayrton990 said:
what do you mean with that?
Click to expand...
Click to collapse
BUGS:
Hostpot may be broken => I'm waiting for the stable version
PE Plus - stuck on POCO Logo. Still better this than crashing after boot ;D
Edit: Also if some apps stopped working (showing content) for ya just clear data of Android System WebView
Deleted
@Ayrton990: Awesome! Could you add Wireguard support, please?
Finally a kernel for this device, thanks for this man. I hope we get more kernels and MIUI/Android 11 support.
svzodiac said:
BUGS:
Hostpot may be broken => I'm waiting for the stable version
Click to expand...
Click to collapse
Yeah but the way you wrote it seems to be little rude
grt67DFqyu said:
@Ayrton990: Awesome! Could you add Wireguard support, please?
Click to expand...
Click to collapse
Yes it will be added next update
Thank you for your work！！！Will you consider supporting lineageos？
will you add kcal support & fsync toggle?
Camera does not work in c.droid after kernel
Derepinar said:
Camera does not work in c.droid after kernel
Click to expand...
Click to collapse
Crdroid use 12.03......this kernel work on 12.04 base.
This should work for Paranoid Quartz right?
nvm: aospa is based on 12.03
Awesome work! Thanks!
Thank you very much ? i am waiting miui12 and android 11 weakly support. And i am waiting mostly screen oc. Congratulations for fix xiaomi sources ?
how do I know on which version of ROM am I ? I forgot what was my stock ROM was when I was flashing first Xiaomi.eu rom then oneOS rom..