I currently have a LG G3 Stylus running cm12 (5.1.1) rooted. I played around with the GeneUX rom for a while. After a while I decided to try something else, so I downloaded CM 12. My phone has always booted up by first displaying a carrier/ brand logo and then a boot animation. I made sure to wipe everything except for my internal memory and sd card when I installed the new ROM. But even though I am currently running CM 12, my phone starts up by displaying a GeneUX5 logo and then whatever boot animation I decide to pick from "Boot Animation for SuperUSER". I need help in order to remove, change, or disable the logo thing left behind from the last rom.
https : //puu.sh/wUo6F/c4df47eedd . png
I can't post direct links.
Related
Ok so i'm trying to figure out whats wrong.
I got my G- Tablet, got clockwork running with no issues, installed Cyanogen 7 build 38 (which was available at the time) and installed gapps.
Everything was running perfect.
Today I got an SD card in the mail for it and I popped it in, booted up, and now its stuck in the Cyanogen boot animation screen. I've rebooted several times, removed the sd all together (at the time it had nothing on it), loaded the latest build along with cyanogen 6 beta 4 etc and i'm always stuck at the boot animation.
I've done factory resets, and wiped cache, and even tried to wipe the Dalvik cache.
I'm at a total loss, does anyone know what I can do?
You know what I have found. with the CM7 boot. When I first installed it with no apps it would take 3 to 4 arrow passes around the android to get to the home screen about 4 seconds. But after I installed all my apps the time went up a lot. After about 30 passes I stopped counting and it takes several minutes to boot up.
worst comes to worst you can always use nvflash to go back to stock and start over again
Well....i thought that maybe that was the issue....that ill just let it loop its way to death and see what happens when i walk away for 5 minutes but I found the tablet turned itself off :-/
Hows this nvthing work?
http://forum.xda-developers.com/showthread.php?t=861950
that has a very good step by step guide on what needs to be done. Just an FYI that will put you on stock rom and I think the OTA update is down right now, so you might not be able to update to 3588 till OTA comes back up.
wow excellent, thank you so much for the info.
I will give this a try, and report back my findings
ok, so I tried this nvflash thing and it ran successfully. I let it reboot....and now instead of the cyanogen flash animation i get the g tablet animation loop.
For some reason this thing is getting stuck at the boot animations...is there something I can do within clockwork to format something...???
Wiping Cache and Data usually clears up looping at the animation for me. If that doesn't help then repartition.
SOLVED. Ok so I did some reading on the topic, it turns out that the tablet needs to have the sd card partitioned a certain way in order to get everything running again. The link at the bottom has all the information if your g tablet doesn't get past the splash screen and your stuck in a boot loop.
http://forum.xda-developers.com/showthread.php?t=865245
just flashed the new Android_Revolution_HD-One_5.2_GE ROM via CWM. appeared to install fine. finished all the steps of selecting my apps, options, etc. phone started booting up, made it to the language selection screen and the rebooted. it just keeps rebooting. the furthest it makes it to is the language selection screen, but sometimes not even that far. i also have the new kitkat 4.4 update saved on my phone. i couldn't get that to install via the OTA update, so i saved it in my "ROMs" folder on my phone. after one of the reboots, it started installing the updates, all 101 installed successfully (it appeared). i'm not sure if that was from the Revolution 5.2 ROM or my saved update, but i thought maybe it would be fine after that. however, it still continues to just reboot, sometimes making it to the language selection screen, sometimes the "Google" splash screen, and sometimes only to the "HTC" screen. i can still get into CWM recovery just fine though. can anyone help? i'm stuck between a rock and a boot loop place right now, and it sucks!!! any advice would be greatly appreciated! thanks!
Was your phone s-off? Off not then that's your problem right there
Sent from my HTC One using Tapatalk
Get yourself back into recovery and restore a back up ... You did make one, didn't you? If not, just flash a new ROM. Go with something known stable, just to get back on your feet and then try your ARHD flash again if you want.
Sent from my HTC One using Tapatalk
I have a LG G3 Stylus running lollipop. I played around with the GeneUX rom for a while. After a while I decided to try something else, so I downloaded CM 12. My phone has always booted up by first displaying a carrier/ brand logo and then a boot animation. I made sure to wipe everything except for my internal memory and sd card when I installed the new ROM. But even though I am currently running CM 12, my phone starts up by displaying a GeneUX5 logo and then whatever boot animation I decide to pick from "Boot Animation for SuperUSER". I need help in order to remove, change, or disable the logo thing left behind from the last rom.
https : //puu.sh/wUo6F/c4df47eedd . png
I can't post direct links.
Recently, I flashed a TWRP and rooted my Tablet (Galaxy Tab A SM-T350). Yesterday, I made the mistake of installing crdroid (https://forum.xda-developers.com/galaxy-tab-a/development/rom-galaxy-tab-8-0-t3912517) and wiping the recommended partitions (In that post). After confirming that the custom ROM worked, I went back into TWRP to install the Google Apps and SuperSU. That's when I screwed up.
After installing those .zips I went back into crdroid, and the "Weather Pro" or something like that, which appeared to be the launcher, kept crashing.
Regretting my choices and wanting to go back to stock, I flashed this ROM with ODIN: https://androidfilehost.com/?w=files&flid=154234
That didn't seem to work, as when it booted into the setup, it would crash and reboot. I thought I had flashed the wrong version of Android on it, and downloaded this ROM: https://www.sammobile.com/firmwares/galaxy-tab-a/SM-T350/XAC/download/T350XXU1CQJ5/194035/
That also didn't seem to work, as the device would do the same thing. Boot to setup and crash. I tried to boot into ASR and wipe it from there, which is what landed me where I am now:
The device booted, went into setup and immediately shut down. The device does not boot at all, and when plugged in, simply shows the circle with the bolt inside, never showing the green circle and the battery percentage.
Quick FYI: I backed up everything with ADB to my PC way before this happened. Don't know if that will help.
What I mean: https://1drv.ms/v/s!AnXXk5PX0LXn3gd4nJiaPXYOKhFv
Anyone know where to begin in terms of resurrecting my tablet?
Thanks in advance
UPDATE: I don't know what happened, but the device is not charging. Still refuses to boot without crashing but I feel like this could help
Update 2: Ok so it turns out I was stupid and the battery was just dead (I thought it was charged after a night-long charging, but I guess not)
HI all,
Did anyone figure out a way to apply a customer boot animation since we can't simply go an change the bootanimation.zip file and so far all magisk modules i tried simply don't work.
Unless you have a fairly short animation, by the time it thinks of getting moving you've already booted into the home screen. In the past I created a couple of custom boot animations. I stopped using them when I chose to use rooted stock firmware instead of custom ROMs. As a result I haven't searched for a long time for a replacement boot animation: not that I need to given I still have my boot animations stored on a HDD.
it is a short one well kinda, wanted to put the nokia handshake as the bootanimation for fun but couldn't figure out how to actually do it due to android 13 read only limitations and i think the modules i tried didn't work due to the pixel now having a dynamic animation not quite sure, seems like its not worth it anymore