I have currently TWRP installed and firmware COL-L29 8.1.0.131 (C432).
Since two days now i have a notification for a security update of ~1.5mb but how can I install it?
When I just hit the button "install now" the phone restarts into twrp and can't perform the update.
Any ideas what to do?
Im also interested in this
You will have to remove twrp.
I made full update of my system with twrp via HuRUpdater, so there should be a way to "only" install this security update.
Otherwise, is there a way to get the original recovery back?
flattervieh said:
I made full update of my system with twrp via HuRUpdater, so there should be a way to "only" install this security update.
Otherwise, is there a way to get the original recovery back?
Click to expand...
Click to collapse
Original recovery wont work either.
You need a modified recovery that can install
Not approved firmwares. We had a nocheck recovery on huawei p9 forum. Something similar we need for this device.
You are playing with the fire by playing with that kind of updates without having the basic knowledge of ADB. HuRUpdater fails for many reasons and can brick easily your device even if you do the things right.
So basically you have to find original Recovery.Img and push it through adb. From the other hand the latest firmware is not signed from google yet so in a way its going to be useless since for every future update you will face issues if its not signed by google.
So basic steps find official firmware for your cust.
Extract recovery image, install adb on your pc
Google the commands for adb recovery,
Push recovery image.
Download firmware finder from google play,
Check firmware versions, check if its approved from Google
If not wait a week or so and it will get approval.
Then it will push automatically.
If your device is not to be rooted its not really worth to have twrp. If you are rooted then try to find no-check recovery for honor 10 and this way you can install upcoming updates and security patches with no google approval.
Be extra careful, a security update won't make your phone powerful. Instead you might brick it and never recover it again. As a developer i already send to garbage 5 huawei P9 devices and countless honor 8
Hi everybody,
I was on rooted and rebranded ALP-L29C432B148 (before rebranding it was L29C636 as far as I remember) and wanted to go back to Stock. I flashed the ALP-L09C432B149 firmwarefrom this thread
https://www.android-hilfe.de/forum/...nstall-stock-rom-mate10-mate10pro.882911.html
and then after sucessful flashing the buld-nr. showed ""System 8.0.0.046 (0FTC)". To get the correct buoild-nr and to be able to receive ota updates I wanted to rebrand again and install the ALP-L09C432B148 from this thread
https://www.android-hilfe.de/forum/...jeder-version-zum-alp-l09-l29c432.882774.html
again to use the rebrand mod again. This wasn't successful as the firmware install failed. After that I couldn't install any firmware (neither B149 nor B148). If I install twrp-alp-firedance it shows only the twrp startscreen, but I can't access twrp.
Further more I'm not able any more to push any files to the phone, it fails with "adc couldn't create file..Is a directory" Flashing files via adb works.
What can I do now to get back a working system with stock rom?
Thank you very much in advance for your help!
Welcome to the Mate 20 X GlobAL00ized project. This ROM's goal is to transform your Chinese AL00 into a global device. This ROM is based on EMUI 9.1 version 9.1.0.120
[size=+2]NOTE: YOU CANNOT DOWNGRADE AFTER UPDATING TO EMUI 9.1. Also, a factory reset is not needed if you are coming from EMUI 9, but if you want to, that's fine.[/size]
Join our Telegram group:
Everest Dev
Requirements:
TWRP
Know how to boot into TWRP
EMUI Flasher by @olddroid
EMUI 9.1 (9.1.0.120)
Transformation ROM 2.2
Root with magisk
TWRP image on your PC
Recommendations:
Be decrypted
A factory reset for first time users
Magisk installed to recovery_ramdisk
A backup of your system, preload, product, version, and vendor partitions. Not necessary as erecovery can restore your device, but I thought I'd mention it anyway.
Changelog in the second post
Known Issues:
Google Play store is missing
SetupWizard doesn't work for clean flashes
These will be fixed when L29 EMUI 9.1 is released.
Sometimes the device will refuse to boot with magisk root and get stuck at "your device is booting." Hopefully later magisk versions will fix this. For now simply hold the power button down to reboot and try again. You may need to do this several times. but wait a least a minute before you do.
Installation steps:
First and foremost, backup your device. If you use TWRP or hisuite, go ahead and create a backup with either and backup your internal storage.
Step 1:
Start off by downloading and installing EMUI Flasher below:
Download EMUI Flasher
Step 2:
Download EMUI 9.1 9.1.0.120 AND Transformation ROM 2.2 with either your phone or PC below:
Download EMUI 9.1 version 9.1.0.120
Download Transformation ROM 2.2
Step 3: If you have downloaded EMUI 9.1 and Transformation ROM 2.2 with your phone, skip to step 3.5
Copy EMUI 9.1 (update_full_base.zip) and Transformation ROM 2.2 to your device.
Step 3.5: Now's a good time to disable any magisk modules that may modify or write over system files designed for EMUI 9, they more than likely will not be compatible with EMUI 9.1 and could cause bootloops.
Step 4:
Open EMUI Flasher and select the update_full_base.zip and start the flash.
If you want to remain on EMUI 9.1 official without the Transformation ROM, simply let EMUI Flasher do its thing and you're done. Otherwise, continue on below.
At this point, EMUI Flasher will copy the update_full_base.zip to /data and automatically reboot the phone to nocheck recovery. You will need to pay attention. The flashing process will take less than 3 minutes and when it is done, you will need to boot into fastboot with the phone connected to a PC and the volume DOWN button held.
Step 5:
Once you are in fastboot, open a command prompt/terminal where the TWRP image is located and issue the command "fastboot flash recovery_ramdisk twrp.img"
Step 6:
Issue the command "fastboot reboot" and immediately unplug your device from the computer and begin holding volume UP AND power (release POWER after the display turns on but continue holding volume UP) to get into TWRP.
Note: If for some reason you don't get into TWRP and instead get the boot screen telling you to press volume up for 3 seconds, do that to get to eRecovery, then SHUT DOWN from eRecovery. Once fully shut down, hold volume UP and power until the device vibrates and the display powers on--at this point you may release the power button but CONTINUE HOLDING VOLUME UP until the phone comes on and says it is booting.
Step 7:
Once you are in TWRP, flash Transformation ROM 2.2. The ROM will flash magisk as well but you will still need to have magisk manager if it isn't already installed.
Step 8:
Reboot Recovery from TWRP if you want root, or Reboot System from TWRP if you don't.
Step 9:
Rejoice!
XDA:DevDB Information
GlobAL00ized ROM, ROM for the Huawei Mate 20 X
Contributors
freeza
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: TWRP
Version Information
Status: Stable
Current Stable Version: 2.2
Stable Release Date: 2019-05-09
Created 2019-04-13
Last Updated 2019-05-09
Changelog
5/9/19: updated for fw 120 with May 2019 Security Patch.
4/22/19: updated for fw 119
4/12/19: Initial release
Patches and fixes
Restore Huawei Dialer and Contacts:
Huawei Dialer and Contacts for EMUI9.1
Great work !
Gửi từ EVR-AL00 của tôi bằng cách sử dụng Tapatalk
Can i flash the 9.1 beta without unlocked bootloader?
You are a superstar! ???
I messed up. When the EMUI flasher exited EMUI to install the base, I thought it had already installed the base, and I had missed the part where I needed to hold the volume down button, and I thought the phone was being encrypted. So I force closed the phone, and booted into TWRP and installed the 2.0 ROM. So I mistakingly installed the 2.0ROM without installing the upto date base. When I realised what I had done, I installed the new base and then the 2.0 ROM again. But ever since the phone has been buggy, e.g. if I do 2 finger touch, it exits the app I'm in. Also, now when I try to get into TWRP, it takes me to Stock eRecovery, even after I flash TWRP with ADB. And also now I am stuck in a bootloop.
I am currently using stock eRecovery to reinstall upto date package and recovery. What should I do from here to get back to 2.0 ROM. Thanks in advance.
Stock eRecovery downgraded to EMUI 9.0.0.200!!! Not sure what to do from here. Will keep tinkering.
Abdul Oxford said:
Stock eRecovery downgraded to EMUI 9.0.0.200!!! Not sure what to do from here. Will keep tinkering.
Click to expand...
Click to collapse
Nice. Was unaware that it would work.
Sent from my EVR-AL00 using Tapatalk
freeza said:
Welcome to the Mate 20 X GlobAL00ized project. This ROM's goal is to transform your Chinese AL00 into a global device. This ROM is based on EMUI 9.1 Beta version 9.1.0.115
[size=+2]NOTE: YOU CANNOT DOWNGRADE AFTER UPDATING TO EMUI 9.1 BETA. Also, a factory reset is not needed if you are coming from EMUI 9, but if you want to, that's fine.[/size]
Join our Telegram group:
Everest Dev
Requirements:
TWRP
Know how to boot into TWRP
EMUI Flasher by @olddroid
EMUI 9.1 BETA 9.1.0.115
Transformation ROM 2.0 beta
Root with magisk
TWRP image on your PC
Recommendations:
Be decrypted
A factory reset for first time users
Magisk installed to recovery_ramdisk
A backup of your system, preload, product, version, and vendor partitions. Not necessary as erecovery can restore your device, but I thought I'd mention it anyway.
Changelog in the second post
Installation steps:
First and foremost, backup your device. If you use TWRP or hisuite, go ahead and create a backup with either and backup your internal storage.
Step 1:
Start off by downloading and installing EMUI Flasher below:
Download EMUI Flasher
Step 2:
Download EMUI 9.1 Beta 9.1.0.115 AND Transformation ROM 2.0 beta with either your phone or PC below:
Download EMUI 9.1 Beta version 9.1.0.115
Download Transformation ROM 2.0 Beta
Step 3: If you have downloaded EMUI 9.1 beta and Transformation ROM 2.0 beta with your phone, skip to step 3.5
Copy EMUI 9.1 Beta (update_full_base.zip) and Transformation ROM 2.0 beta to your device.
Step 3.5: Now's a good time to disable any magisk modules that may modify or write over system files designed for EMUI 9, they more than likely will not be compatible with EMUI 9.1 and could cause bootloops.
Step 4:
Open EMUI Flasher and select the update_full_base.zip and start the flash.
If you want to remain on EMUI 9.1 Beta official without the Transformation ROM, simply let EMUI Flasher do its thing and you're done. Otherwise, continue on below.
At this point, EMUI Flasher will copy the update_full_base.zip to /data and automatically reboot the phone to nocheck recovery. You will need to pay attention. The flashing process will take less than 3 minutes and when it is done, you will need to boot into fastboot with the phone connected to a PC and the volume DOWN button held.
Step 5:
Once you are in fastboot, open a command prompt/terminal where the TWRP image is located and issue the command "fastboot flash recovery_ramdisk twrp.img"
Step 6:
Issue the command "fastboot reboot" and immediately unplug your device from the computer and begin holding volume UP to get into TWRP.
Note: If for some reason you don't get into TWRP and instead get the boot screen telling you to press volume up for 3 seconds, do that to get to eRecovery, then SHUT DOWN from eRecovery. Once fully shut down, hold volume UP and power until the device vibrates, at this point you may release the power button but CONTINUE HOLDING VOLUME UP until the phone comes on and says it is booting.
Step 7:
Once you are in TWRP, flash Transformation ROM 2.0 beta. The ROM will flash magisk as well but you will still need to have magisk manager if it isn't already installed.
Step 8:
Reboot Recovery from TWRP if you want root, or Reboot System from TWRP if you don't.
Step 9:
Rejoice!
XDA:DevDB Information
GlobAL00ized ROM, ROM for the Huawei Mate 20 X
Contributors
freeza
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: TWRP
Version Information
Status: Beta
Current Beta Version: 2.0
Beta Release Date: 2019-04-12
Created 2019-04-13
Last Updated 2019-04-13
Click to expand...
Click to collapse
Huawei's dialer is not functioning right with new update. Is there a newer one with the 9.1. beta?
Is it really not possible to make a TWRP flashable stock full ROM? Then, flash the ROM after... I don't want to take the risk of doing it the EMUI flasher way again as I did before and messed up.
Or can you make a version using the method described here? Only If it's not too much to ask. Thank you.
https://forum.xda-developers.com/hu...awei-p20-pro-charlotte-l29c432b131-8-t3809964
Sent from my HUAWEI EVR-AL00 using XDA Labs
Steamer2499 said:
Huawei's dialer is not functioning right with new update. Is there a newer one with the 9.1. beta?
Click to expand...
Click to collapse
I'll create one
Sent from my EVR-AL00 using Tapatalk
freeza said:
I'll create one
Sent from my EVR-AL00 using Tapatalk
Click to expand...
Click to collapse
Thanks! The new updates and rom working great!
freeza said:
Nice. Was unaware that it would work.
Sent from my EVR-AL00 using Tapatalk
Click to expand...
Click to collapse
I guess I screwed it up too. I ended up with kinda hybrid (see attached pictures).
So what really happened? I flashed update without any problem. Flashed twrp after, but there was no way to reboot to twrp. I was aware that it might not happen the first time but after about ten times, when I was confident that I was doing the procedure as it was described, I panicked. I always got into erocovery and I believed that I was in some kind of bootloop. So I studied my options and I decided to recover the stock. I had done it once before on my tablet and I'd managed to recover the corrupted system for the price of the lost root, factory reset, and locked bootloader.
I was expected the same but surprisingly I got the 200 rom back with the fully recovered phone. I started the procedure of flashing 9.1 again and this time I was able to get twrp immediately. Only what I noticed that during update flashing procedure about two lines appeared red. Otherwise flashing ended up flawlessly.
The result is a monster which at first sight appears fully operative. I noticed improved gesture navigation. Otherwise, the system lacks any of the improvements promised for the new EMUI (https://www.******************/emui-9-1-is-here-check-its-impressive-features/). And both magisk and twrp are tied to recovery (you can have only one mounted), erecory is original). I assume that transformation rom should sort this out but it didn't in my case.
After factory reset when up to 9.1. My phone can't conect to hisuite. Please help... thanks
I no longer have to hold the up button when booting to have root access. But CTS profile false in magisk.
...NICE ROM...
Hello do you have same problem with this theme: "Black EMUI 9 Theme for Huawei [ Dark EMUI ]" or "Mountain Dark Theme for EMUI ".
Police on background... Can't read... (like in phone settings)??? (For now only use original theme...)
AND i'm always build 9.0.0.1.198 and not in 9.1.0.115, but emui is 9.1.0???
Why... (i follow the right procedure...)
freeza said:
Nice. Was unaware that it would work.
Sent from my EVR-AL00 using Tapatalk
Click to expand...
Click to collapse
Abdul Oxford said:
Stock eRecovery downgraded to EMUI 9.0.0.200!!! Not sure what to do from here. Will keep tinkering.
Click to expand...
Click to collapse
I'm in rom 9.1.0.115 Beta... Please help me how to downgraded to EMUI 9.0.0.200. eRecovery say error while checking rom version from sever. Thanks
I can not get root
Thanks for this. However, I'm unable to get root with magisk. I install the magisk ramdisk severally without any effect. Please help. Thanks.
I don't have my phone rooted yet, but I want to thank you for the great job!
Hi all! My device is LYA-L29 C432.
Is there a way to downgrade from 11.0.0.118 beta back to 10.1.x.xxx? I have tried using HiSuite but on the update tab the update to older versions never shows up. I have also tried downloading multiple LYA-L29 C432 full OTA 10.1 packages and extracting UPDATE.APP file to dload folder on a USB and trying to force update using *#*#2846579#*#* but after the automatic restart it says that update failed. Tried different USB stick. Am I doing something wrong?
Can you please help?
I always thinked that leaving the project from beta app has as conseguence the downgrade to previous version
Today my phone just boot looped. Can get to TWRP. But, I want to update A14 to 15, since it might allow the phone to start again. I flash stock Boot A14, that seem to work. Then, I try to flash the update to A15. TWRP gives me this error: fec_open "/dev/block/dm-10" failed bad address.
E2004: my_region.01000100 partition fails to recover.
What does this error mean? and, is there anything else I can do or try?
turns out i have an EU phone, with indian sowftware on it? Is it possible to flash it back to EU? And, how can i check the current version of the firmware in terminal ?
update: ok, it looks I am on version 11. Is there any link available to the boot.img from A10 and the incremental update to A11 (not the telegram link, does not work with a broken phone)? Both Indian and EU? Hope that redoing the update fixed the bootloop