i have a serious problem with my huawei u8950-1 g600.i tried several way to unlock bootloader and finally i find a file and transfer it to my sd and update my devise by hold volume up/down and power. after this i have my phone rooted and recovery installed but the major problem, Bluetooth is not working anymore and in about phone section in status Bluetooth address is unavailable:silly::silly:.
so i think if i have original firmware it will be fixed.
thanks in advance
mazi_v said:
i have a serious problem with my huawei u8950-1 g600.i tried several way to unlock bootloader and finally i find a file and transfer it to my sd and update my devise by hold volume up/down and power. after this i have my phone rooted and recovery installed but the major problem, Bluetooth is not working anymore and in about phone section in status Bluetooth address is unavailable:silly::silly:.
so i think if i have original firmware it will be fixed.
thanks in advance
Click to expand...
Click to collapse
i have the same problem as u !!
i have huawei u8950-1 . i used an offline unlock bootloader , it worked and i rooted my device but the problem is bluetooth doesnt work anymore !!
i surfed all the net and there is no official firmware for u8950-1 !!
so we have no other option , we have to wait till releasing official firmware via huawei website .
HELP ME
plaese
rom official huawei g 600 u8950-1
costum rom huwei g600 u8950-1
ronaadinho said:
i have the same problem as u !!
i have huawei u8950-1 . i used an offline unlock bootloader , it worked and i rooted my device but the problem is bluetooth doesnt work anymore !!
i surfed all the net and there is no official firmware for u8950-1 !!
so we have no other option , we have to wait till releasing official firmware via huawei website .
Click to expand...
Click to collapse
hey buddies !!
i have found these 3 firmware for u8950-1 but i cant put their links here because my posts are below 10 .
i have downloaded all 3 ones but i havent tried them yet . i think all 3 are official firmwares , the first one is used in Czech Republic and i have found 2 guys from Czech Republic in xda who have this verion on their 8950-1 and its working all fine . have u tried them ????
versions are :
1. V100R001C326B953
2. V100R001C00B941
3. V100R001C00B942
they have been uploaded on a uploadcenter ( ulozto) from Czech Republic u can google u8950-1 ulozto and find them easily .
i got my phone to huawei service center and they flash it to ver 957 and its all ok now.
if you tried one of this rom let us know.
but rooting problem still last and suffering:crying:
roms link
h t t p:/ /w ww.ulozto.net/hledej?q=u8950-1
mazi_v said:
i got my phone to huawei service center and they flash it to ver 957 and its all ok now.
if you tried one of this rom let us know.
but rooting problem still last and suffering:crying:
Click to expand...
Click to collapse
Hey buddy , thank u for helping . Could u let us know , did u pay money for ur phone to be flashed or not ? Because as u know rooting phone voids its guarantee . By the way , i havent tried them because after that i need unlock code and huawei hasnt sent me any code yet . So i prefer my phone to be rooted instead of having my bluetooth working and unfortunately there is no solution for rooting u8950-1 yet . Im wondering why they dont email us any unlock code for u8950-1 but they have sent to people unlock code for u8950d . Did u ask huawei service about unlock code ?
U8950-1
hi xda
please official rom huwaei G600 U8950-1
thank you very much
HELP ME
my phone U8950-1V100R001C00B948
nothing rom by phone please official rom my phone
ronaadinho said:
Hey buddy , thank u for helping . Could u let us know , did u pay money for ur phone to be flashed or not ? Because as u know rooting phone voids its guarantee . By the way , i haven't tried them because after that i need unlock code and huawei hasn't sent me any code yet . So i prefer my phone to be rooted instead of having my Bluetooth working and unfortunately there is no solution for rooting u8950-1 yet . I'm wondering why they don't email us any unlock code for u8950-1 but they have sent to people unlock code for u8950d . Did u ask huawei service about unlock code ?
Click to expand...
Click to collapse
i didn't paid anything.i think they were so kind with me and didn't avoid my guaranty.
you can unroot your device then take it to service center.
or flash one of that ROM on my previous post.
ronaadinho said:
hey buddies !!
i have found these 3 firmware for u8950-1 but i cant put their links here because my posts are below 10 .
i have downloaded all 3 ones but i havent tried them yet . i think all 3 are official firmwares , the first one is used in Czech Republic and i have found 2 guys from Czech Republic in xda who have this verion on their 8950-1 and its working all fine . have u tried them ????
versions are :
1. V100R001C326B953
2. V100R001C00B941
3. V100R001C00B942
they have been uploaded on a uploadcenter ( ulozto) from Czech Republic u can google u8950-1 ulozto and find them easily .
Click to expand...
Click to collapse
Hi everybody,
I try also to find an original firware for my u-8950-1, I downloaded the V100R001C326B953 firmware but it doesn't install on my phone (i have U8950-1V100R001WEC00B942).
The 3 firware versions are only work with Czech phones i think.
Anyone have link to other official firware? I try google and of course huawei website but couldn't find anything.
Thanks for your help guys.
jimibxl said:
The 3 firware versions are only work with Czech phones i think.
Anyone have link to other official firware? I try google and of course huawei website but couldn't find anything.
Thanks for your help guys.
Click to expand...
Click to collapse
http://consumer.huawei.com/en/mobile-phones/smart-phones/support/downloads/u8950-en.htm
Update failed
Hello, I tried to install the HUAWEI Ascend G600 firmware(U8950-1,Android 4.0,V100R001C00B961,General Version), but the second step crashes with the message "update failed" . Can anyone help me understand the problem? thanks
jag123123 said:
Hello, I tried to install the HUAWEI Ascend G600 firmware(U8950-1,Android 4.0,V100R001C00B961,General Version), but the second step crashes with the message "update failed" . Can anyone help me understand the problem? thanks
Click to expand...
Click to collapse
I received the problem too, but tried it on my U8950N-51
I will give this firmware a go:
http://www.mediafire.com/download/2jxf7v81ra60pw7/U8950-1-V100R001C326B953-CZ.rar
Otherwise, I might try these ones:
http://www.ulozto.net/hledej?q=u8950-1
Is u'r Problem fixed..?
jag123123 said:
Hello, I tried to install the HUAWEI Ascend G600 firmware(U8950-1,Android 4.0,V100R001C00B961,General Version), but the second step crashes with the message "update failed" . Can anyone help me understand the problem? thanks
Click to expand...
Click to collapse
hey I'm also in the same situation Step 2/2 "Update failed".. Please tell how to Fix this..
mailtomeesubash said:
hey I'm also in the same situation Step 2/2 "Update failed".. Please tell how to Fix this..
Click to expand...
Click to collapse
Hi. i have a serious problem on my huawei u8950n-51. I need the original firmware. thanks
Please
mazi_v said:
i have a serious problem with my huawei u8950-1 g600.i tried several way to unlock bootloader and finally i find a file and transfer it to my sd and update my devise by hold volume up/down and power. after this i have my phone rooted and recovery installed but the major problem, Bluetooth is not working anymore and in about phone section in status Bluetooth address is unavailable:silly::silly:.
so i think if i have original firmware it will be fixed.
thanks in advance
Click to expand...
Click to collapse
Please can u till me which program had u used to unlock boot loader of huawie u8950-1 cz i tried dc unlocker and it has a problem.. it always says:
unknown error (231)
DBAadapter reserved Interface driver ver. 2.0.6.601 required, please download and install
and i downloaded that driver but the problem still exists>>
so please kindely tell me where is that file u used, or is there any program for that other than dc unlocker
hi:
mine is "u8950-1V100R1C00B963"
ANY firmwares to suggest?
8950-1 State 9008
Hello Hi Huawei 8950-1 brick when connected to a computer is defined as port 9008, how can it be restored prompt please?
You have to find UPDATE.APP file and try to reset by dload (you can find some instructions on internet)
9008 Huawei u8950-1
I was told that I can recover through the QPST That in the beginning it is necessary to restore the loader and it should go to mode 9006 and then restore the flash but it does not want to be stitched in the program QPST .And Dload is the program such? First time I hear
Hello
I own a ZTE V967S, my first Android Mobile. Now I have some trouble with the phone, by mistake I deleted the file: com. android.phone. Now the phone doesn`t find my sim-card and so I have no adressbook and can`t dial any number.
I have tryed a lot of different Android Versions (all MaxFlavour and MIUI) but the problem is still the same, the phone can`t find my Simcard..........
Can anybody help me?
I`m writing from Germany so excuse my bad english
Flash A New Firmware
You got to flash a new firmware for your phone. Google for it & flash it..
Hi,
I have found no firmware download for my phone.
How big would the file because its about?
100-250 mB
Leonhardt666 said:
Hi,
I have found no firmware download for my phone.
How big would the file because its about?
Click to expand...
Click to collapse
Size may vary frm 100 mb to 250 mb..
Hi
Can someone help me?
I still have the same problem as in the beginning.
And i don`t find a firmware at the moment i have installed
the new max smart v3.
Everything works up but i can`t dial any number and the phone doesn`t find my sim-card!
Sorry for my bad English
Thanks for Help.
Hello,
I offer 25 Euro by Paypal
for who is able to help me that I can again make calls with my phone.
A guide would be helpful
The problem is described in this thread.
Thank you
Hi,
can someone send me a working Backup from a Zte V967s or 987s
for SpFlashtools or MtkDroidTools?
Thanks.
You still need help with your phone?
Hey all,
I ned your help plz
Year ago i bought honor 6, excellent choice.
Since then, I hacked it with Your help
But I cannt Update it, it's always write me on cwm in Chinese and that he can't find the Update file, I tried also without any sdcard as someone suggest
My model h60 l02
The Update I'm tring is h60l02… b316
P.s
How to change cwm to English and get rid of All the chinese on my phone?
Hope you'll help.
Thanks
Ofir
Someone??
??
Hi All,
I'm sorry to bother you all, but I really need you help. I live in Morocco and I bought a new Oppo R17 Pro from Aliexpress, I thought it was a global version, but I once I got my hands on it, I realised that the model is PBDM00 which is a Chineese model according to google and the tons of bloatware installed on the phone . I want to install the global firmware CPH1879 with international rom.
I attached 2 images showing all the details you might need to give a hand.
Could you please inform me on how to do that? I really need your help guys. Thank you so much
You're probably better off on the Chinese version. The latest Android 10 update for R17 Pro just came out a few days ago. It is only available for PBDM00 and PBDT00 variants (both Chinese). I'm on CPH1877 and don't have the Android 10 update yet.
@sghir ziane
The mentioned tons of bloatware installed aren't part of device's ROM: they are either installed as user apps or system apps / system-privileged apps and can all get deinstalled / frozen by you.
sghir ziane said:
Hi All,
I'm sorry to bother you all, but I really need you help. I live in Morocco and I bought a new Oppo R17 Pro from Aliexpress, I thought it was a global version, but I once I got my hands on it, I realised that the model is PBDM00 which is a Chineese model according to google and the tons of bloatware installed on the phone . I want to install the global firmware CPH1879 with international rom.
I attached 2 images showing all the details you might need to give a hand.
Could you please inform me on how to do that? I really need your help guys. Thank you so much
Click to expand...
Click to collapse
hey bro now can unlock the bootloader
need to make oppo acount
and donwload the appk
https://bbs.coloros.net/graphic?id=1498611
https://www.getdroidtips.com/unlock-bootloader-oppo-r17-pro/
i think when you donde it you can install any firmware
i got my oppo r17(pbem00) BL unlocked but i could not do anything after that since we don't have the suitable twrp and you will get stuck in the username and password of the msm download tools in the stock rom files.
Hi friends, I have downgraded the firmware from the global version of ui 3.0 to the Indian version 2.0. Google Play services are not certified, the NFC does not work, I want to return the global firmware and I can't do anything. It is not possible to unlock the bootloader, please help!
Iunorthodox said:
Hi friends, I have downgraded the firmware from the global version of ui 3.0 to the Indian version 2.0. Google Play services are not certified, the NFC does not work, I want to return the global firmware and I can't do anything. It is not possible to unlock the bootloader, please help!
Click to expand...
Click to collapse
Hello, maybe you could help me with my situation, I have an RMX2086 with RUI 1.0 Android 10 build A.53 and I want to unlock the bootloader, but the deep test application comes out approved, but when the test started it restarts for 2 seconds on a black screen and letters in Chinese and it restarts in normal mode, I wanted to know if maybe you could share how to upload the software version to a higher than A.53 to try to unlock the bootloader
Same problem here downgraded to find out that all google services doesn't work damn :/ any help out there i see no comments !! pls
Hi everybody, i'm facing the same problem.
If anybody has found the solution to fix this issue some help will be greatly apreciated.
The only solution in my case is to install a new firmware via recovery mode but unfortunately there is no ozip file available, the only available AND I STRONGLY RECOMEND TO NOT INSTALL it .
The indian one is supposed to rollback from android 12 ui3.0 to android 11 ui2.0 but you'll get stuck in a dead end !! No more google protect no more updates apps or system....
No fastboot mode available, it appears just a second and the system is boot right after.
Ii've read elsewhere that Realme has disabled it!!!! incredible why ??
thanks