[Tool] Huami Amazfit Smartwatch/Pace Hebrew support installation - Amazfit

Heya,
As a lot of Hebrew native speakers requested, this is a small script to add a Hebrew support to your watches.
This process will add it, BUT the lockscreen will be reversed - שלום will become םולש and will be written from left to right.
I DO NOT take any responsibility for any potential damage caused to your watches, cats, cars or washing machines, do this on your own responsibility.
This is a simple bat file, but ... you will need to be ready.
How? by following these simple steps:
1. Install ADB drivers - https://goo.gl/xGcS4G - do not forget to run the installer as Admin, and verify that you have the drivers installed - please check your device manager for ADB devices.
2. You HAVE to be bootloader unlocked - please read and follow these instructions - https://goo.gl/QVFYBt - note that this WILL VOID YOUR WARRANTY.
3. Download the attached zip file, extract it and hope that your watch won't explode - just make sure that you're selecting the correct option, and wait a little.
I've tested it with the CN recovery, so it should work with the US as well.
The included files are recovery files for US/CN units, created by @Neuer_User , without him this watch would be just another boring and useless watch.
Thank you for your TREMENDOUS CONTRIBUTION to the XDA community!
troubles, problems and other weird demands ... post away !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You're the MAN
worked perfectly!! thank you so much!!

Hi, just tried it after unlocking the bootloader, this is what i got but still no Hebrew, please HELP

Unlocking alone doesn't help, you need to be on "pacified rom"

fzelle said:
Unlocking alone doesn't help, you need to be on "pacified rom"
Click to expand...
Click to collapse
any idea on how to install pacified rom before running this hebrew fix? can u point me to some link please?

idanb007 said:
Hi, just tried it after unlocking the bootloader, this is what i got but still no Hebrew, please HELP
View attachment 4255875
Click to expand...
Click to collapse
Are you expecting the whole watch interface to be changed to Hebrew? If i understand correctly, i don't suppose this script does that. This script adds Hebrew fonts to your watch, so the Hebrew notifications (SMS, whatsapp and others) that you get on your phone shows correctly in your watch. This does not convert your watch language to Hebrew.
And no, you DON'T have be on Pacefied to get the Hebrew support.

Hi @idanb007
This will only add Hebrew reading support, no interface. PACEfied contains the fonts provided by this pack. This will allow you to read messages/emails/whatever that you'll get on your watch, and as I wrote in the first post, the lockscreen notifications will be reversed.
There is no Hebrew interface for the watch, I see no reason for that, you have like 50 words in the entire watch to read.

idanb007 said:
Hi, just tried it after unlocking the bootloader, this is what i got but still no Hebrew, please HELP
View attachment 4255875
Click to expand...
Click to collapse
The watch was suppose to restart after the end of the process and everything should be ok. Have you tried to check Hebrew notifications ? an e-mail or a whatsapp message ?

1immortal said:
The watch was suppose to restart after the end of the process and everything should be ok. Have you tried to check Hebrew notifications ? an e-mail or a whatsapp message ?
Click to expand...
Click to collapse
yes, you right. sorry, didn't see it till now.
it is just strange that the lockscreen notifications are reversed and the notifications are showing fine... i guess it has to do with the RTL support.
that is why I asked for the entire watch Hebrew support, i thought it will resolve the reversed lockscreen notifications issue (even though i don;t need the entire watch text to be in Hebrew...)

Will this work on the amazfit bip ?

Easily I installed Bengali/Bangla font on my amazefit pace
Thank you a lot. Before this, my watch just showed boxes instead of showing Bengali. But now, It shows real Bengali. Just love it.

xoyantajoy said:
Easily I installed Bengali/Bangla font on my amazefit pace
Thank you a lot. Before this, my watch just showed boxes instead of showing Bengali. But now, It shows real Bengali. Just love it.
Click to expand...
Click to collapse
Can you please give me the details procedure?

Related

Huawei Apps:File Explorer,Keyboard,Cloud,Music Player,DNLA,Wallpaper,Soundrecorder

These apps are straigt from the Huawei Ascend P1. You can install them using your favorite File Explorer since these are APKs.
Huawei Music Player
Huawei Keyboard
Huawei Cloud
Huawei File Explorer(+Cloud)
Huawei DNLA(doesnt work on Wildfire! just for those who got a DNLA compatible phone as Samsung Galaxy S2)
Huawei Soundrecorder(will replace stock sound recorder)
Huawei Wallpaper Picker
Huawei Camera
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Screenshots made on Samsung Galaxy Nexus)
Link for registration for hicloud:
https://www1.hicloud.com/user/login.action;jsessionid=3F4011C3E45BA5FBC9D55BBD042B10EF
http://www.relink.us/view.php?id=beef1894178a9c7ba8836e91c32b50
Seem to work on Gingerbread(Wildfire Cm 7.2) and Ice Cream Sandwich(Galaxy Nexus)
Feedback appreciated
(Since I didn´t found a topic where you could download them all, I made one)
Thank you for sharing!
Screenshots would be appreciated.
i already posted similar to this,its 5 posts below yours.
just tested this http://forum.xda-developers.com/showthread.php?p=25528869
And as a basic keyboard it works quite well :-D remember to go to settings, language and keyboard and select after install, then open up keypad input screen and long press in any input box to choose input method and choose huawei. Also i set keypad height to 1. All credit goes to op in linked thread.
[ sig ]
" using my thanks as likes/thanks "
using my thanks as likes
slymobi said:
i already posted similar to this,its 5 posts below yours.
just tested this http://forum.xda-developers.com/showthread.php?p=25528869
And as a basic keyboard it works quite well :-D remember to go to settings, language and keyboard and select after install, then open up keypad input screen and long press in any input box to choose input method and choose huawei. Also i set keypad height to 1. All credit goes to op in linked thread.
[ sig ]
" using my thanks as likes/thanks "
using my thanks as likes
Click to expand...
Click to collapse
Oh, have just seen that only the keyboard was there so I uploaded them myself
lol its fine, the link leads to all other stuff too.
using my thanks as likes
When trying to install Music+, I get the "Error in parsing the file" or something. I also tried the apk from teamandroid, same thing.
Alex_GP said:
When trying to install Music+, I get the "Error in parsing the file" or something. I also tried the apk from teamandroid, same thing.
Click to expand...
Click to collapse
if you read the on the page i linked then it does state that these are really for android 4.0 so it doesnt surprise me that some of the apks wont work correct on our phones.
slymobi said:
if you read the on the page i linked then it does state that these are really for android 4.0 so it doesnt surprise me that some of the apks wont work correct on our phones.
Click to expand...
Click to collapse
I read that dude. Maybe you don`t appreciate my feedback, but some people will.
Alex_GP said:
I read that dude. Maybe you don`t appreciate my feedback, but some people will.
Click to expand...
Click to collapse
woah easy tiger! I wasn't having a moan at you just stating what is written by the op of the apps and informing you why they might not work.
using my thanks as likes
Also tested on an ICS LG GT540, Music + can be installed, but "Force Closes" instantly.
Camera force closes at start.
I dont know how to download... can someone upload the music apk.?
Download is very easy, what´s your problem? Only if you´re not using PC download may not work.
Just click the circles and select the apk you want.
disable the "fade in" effect
How do I disable the "fade in" effect, in the huawei music player ?

[GUIDE][A2017U]Add More Languages to your Device

Hi everyone. I made a zip to add more languages which are on A2017G to our A2017U device. It works B25. Didn't try older version. Please give feedback me if you try.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First of all, I'm not responsible for anything. Please backup your software via TWRP before to start.
I tested it on my device and it is working well. I will add a recovery zip to install original files in case if there is a problem.
You should have TWRP to make these steps.
1. Backup your software.
2. Install ZTE_AXON7_A2017U_AddMoreLanguage_ByWesTD
3. Reboot your device and set language what you want.
Download: https://www.androidfilehost.com/?fid=673368273298962100
To remove:
Install ZTE_Axon7_A2017U_RecoverLanguage.zip and reboot.
It will stay same language but your original files. If you change it one time, you have to install zip again to get languages again.
Download: https://www.androidfilehost.com/?fid=673368273298962102
BEFORE
AFTER
Welcome to badboyz 2.1 does not work after upload disappears the ability to choose action from the power button
mario32 said:
Welcome to badboyz 2.1 does not work after upload disappears the ability to choose action from the power button
Click to expand...
Click to collapse
What do you mean?
No works to b19 Rom bad Boyz no option to select from the power button
Sorry for my english writing from translator
mario32 said:
No works to b19 Rom bad Boyz no option to select from the power button
Sorry for my english writing from translator
Click to expand...
Click to collapse
why do you need power button?
no restart option, recovery etc is a black screen and phone restart
mario32 said:
no restart option, recovery etc is a black screen and phone restart
Click to expand...
Click to collapse
i got then. i did not tried on BadBoyz.
Go BadBoyz zip. system/framework. Copy framework apks and move your system/framework and set permissions. it will be original.
Has anyone try this on B32 ? Want to be sure it works before going through rooting and everything.
I just got this phone for my mother without realizing the US version has so little support for different languages.
It seems both European and Chinese version have tons of languages, but very limited for the US version for some weird reason.
lambition said:
Has anyone try this on B32 ? Want to be sure it works before going through rooting and everything.
I just got this phone for my mother without realizing the US version has so little support for different languages.
It seems both European and Chinese version have tons of languages, but very limited for the US version for some weird reason.
Click to expand...
Click to collapse
Try MoreLocale 2 from PS
WesTD said:
Try MoreLocale 2 from PS
Click to expand...
Click to collapse
Wow! Thanks. I tried few locale setting apps and none worked, but this works great!
However, there is one issue. Configurations reverts back to English when reboot. It is set on whatever the language I set on MoreLocale 2 while rebooting, but once it has completed, reverts back to English.
Any idea how to make it stick? Perhaps run a script on boot up?
Another strange issue is weather program (both built in accuweather widget and weather channel). They are unable to find location (even when I manually search) with language set to any language other than built in languages.
Does this have Finnish?

Problems when flashing Amazfit Stratos 3

Good day! Happy New Year to everyone! I apologize for my bad English, I am writing via google translator.
I tried to upgrade the Chinese version of Amazfit Stratos 3 to the global version and ended up with the following problem: the "Amazfit" logo on the screen
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The watch does not respond to abd commands. The message appears: "using port=5555"
Spoiler
I set different drivers, changed usb, cleaned contacts with an eraser.
In devices in windows it looks like this:
Spoiler
When I try to reflash, I write: "waiting for any device"
Spoiler
Please advise how I can restore them!
Thanks to all! and Happy New Year again!
I still managed to enter fastboot mode
The fastboot beats, I can see serial number my stratos.
But my bootloader is locked!
Although the command with the unlock code is accepted, OKay writes, and when checked with the command "fastboot getvar unlocked"
I get "no", i.e. blocked.
Although it was previously unlocked, that's for sure!
Spoiler
What could be the reason and what to do next?
Hum,
Are you sure you've flash the rom for stratos 3??
The boot logo should not be this one. The one you have is from stratos 2....
[QUOTE = "winni21, post: 84204249, member: 3204122"]
Are you sure you've flash the rom for stratos 3??
The boot logo should not be this one. The one you have is from stratos 2
[/ QUOTE]
It is quite possible! How do I get back to factory firmware?
kuzmy4 said:
[QUOTE = "winni21, post: 84204249, member: 3204122"]
Are you sure you've flash the rom for stratos 3??
The boot logo should not be this one. The one you have is from stratos 2
[/ QUOTE]
It is quite possible! How do I get back to factory firmware?
Click to expand...
Click to collapse
Unfortunately that's a big mistake...
I think you can only try using Cloner Tool (check for the thread) to re-flash Stratos 3 original firmware, but I'm not sure if it will work.
Saratoga79 said:
Unfortunately that's a big mistake...
I think you can only try using Cloner Tool (check for the thread) to re-flash Stratos 3 original firmware, but I'm not sure if it will work.
Click to expand...
Click to collapse
Thank you very much for your reply! I will definitely use your advice and study this topic!
Maybe my problem is in the drivers?
For some reason, adb sees my device, but fastboot does not!
Spoiler
Saratoga79 said:
I think you can only try using Cloner Tool (check for the thread)
Click to expand...
Click to collapse
Did I find the topic correctly?
TUTORIAL: Ingenic Cloner tool - Amazfit PACE/Stratos/3/Verge deep flash tutorial
Heya all, As we all seen and know, the PACE/Stratos/Verge(WIP*) devices have 2 flashing modes: 1. Fastboot - where we need an unlocked bootloader for the watch to be able to downgrade/upgrade/flash custom ROMs. 2. ForceErase - the 2nd option...
forum.xda-developers.com
But I can't see screenshots!
I read it. But this is very, very difficult for me! It is unlikely that I can go this way correctly!
Are there no other ways?
If I go to a service shop, will they be able to repair my device?
Still, I was able to do it! Thank you very much for your advice and help, especially Saratoga79!
kuzmy4 said:
Still, I was able to do it! Thank you very much for your advice and help, especially Saratoga79!
Click to expand...
Click to collapse
So you finally fixed it?
Pictures are missing in Cloner Tool thread, but still understable.
Something you may check is your Serial Number (SN) and bootloader status.

Amazfit Gtr2e looking for global firmware

Hi all
Does anyone having gtr2e global firmware to upload?
I own Chinese and looking to experiment with this bad boy.
Any help full will be much appreciated
Anyone how can upload the firmware?
I have cn running 1.3.6.03
you can't crossflash RTOS devices.
Thanks for your reply
At amazfit bit they manage to flash ,as I read here.
I am willing to try anything, in any case I have it with Chinese language.
I already manage to flash 2 different roms of other versions of gtr2 LTE and esim ,in case that I successfully change the I'd but no have any result.the watch stuck in recovery but doesn't brick. Still in Chinese rom.
If found the global firmware I will try same method as they used to change amazfit bit u
With gadget bridge app.
I Don't care about brick the device
Is there firmware version (or custom firmware) with airplane mode for GTR 2e? To the best of my knowledge GTR 2 has it...
Can someone upload gtr2e global firmware?
I am willing to x3 brick my watch.
There's a telegram group with amazfit roms, but 2e (both GTR and GTS) aren't present there. So still waiting.
Looking for the same. Did you find it ?
Lanex777 said:
There's a telegram group with amazfit roms, but 2e (both GTR and GTS) aren't present there. So still waiting.
Click to expand...
Click to collapse
what is the group name?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone upload the global firmware??
suprim.c said:
what is the group name?
Click to expand...
Click to collapse
huamifw
Global firmware for GTR2e
Lanex777 said:
Global firmware for GTR2e
Click to expand...
Click to collapse
Thank you.
suprim.c said:
Thank you.
Click to expand...
Click to collapse
Thanks very much.
spyrospal said:
Thanks very much.
Click to expand...
Click to collapse
Please share if you are able to flash GTR 2e to this firmware. Mine always fails at 99%
So I have some developments.
From morning time trying to flash all the files,
Tried all the files roatation,but from notify app getting to 99% when trying to flash the .fw file.
When watch becoming brick and when connect to original zepp app,on the sync screen pairing mode I see that the watch and introduction is in English but after sync coming again to Chinese.
Through gadgetbridge I manage to connect to gtr2e, taking the authentication key and adding on the begging of the key -0x in order to connect to the app but when I am trying to flash the files throw the gadget bridge getting the msg ---Element can not be installed"
I believe if I can manage to surpass this ,the job will be done.
Any help would be much appreciated.
Ps I don't care if I will brick my watch,it's crappy Chinese anyway and honesty I not wearing it..
So I have some developments.
From morning time trying to flash all the files,
Tried all the files roatation,but from notify app getting to 99% when trying to flash the .fw file.
When watch becoming brick and when connect to original zepp app,on the sync screen pairing mode I see that the watch and introduction is in English but after sync coming again to Chinese.
Through gadgetbridge I manage to connect to gtr2e, taking the authentication key and adding on the begging of the key -0x in order to connect to the app but when I am trying to flash the files throw the gadget bridge getting the msg ---Element can not be installed"
I believe if I can manage to surpass this ,the job will be done.
Any help would be much appreciated.
Ps I don't care if I will brick my watch,it's crappy Chinese anyway and honesty I not wearing ti
spyrospal said:
So I have some developments.
From morning time trying to flash all the files,
Tried all the files roatation,but from notify app getting to 99% when trying to flash the .fw file.
When watch becoming brick and when connect to original zepp app,on the sync screen pairing mode I see that the watch and introduction is in English but after sync coming again to Chinese.
Through gadgetbridge I manage to connect to gtr2e, taking the authentication key and adding on the begging of the key -0x in order to connect to the app but when I am trying to flash the files throw the gadget bridge getting the msg ---Element can not be installed"
I believe if I can manage to surpass this ,the job will be done.
Any help would be much appreciated.
Ps I don't care if I will brick my watch,it's crappy Chinese anyway and honesty I not wearing it..
Click to expand...
Click to collapse
Now I am trying to flash older version cn and after flashing re,and font in order to try to use it with magical unicorn app if this will change the language
after downgrade cn version to 1.3.1.02
And flashing all the files via notify app ,I manage to install successfully only by the following order the fonts and res from global.
Now I am trying to push the fw somehow.
Can I edit somehow the .fw in order the gadget bridge will allow the installation? Cause I am still getting this element cannot be installed.
I tried all the filemanagers available on playstore.
Cant wait for you to succeed, so I can follow you

Amazfit GTS 3 Persian Language!

Hey guys,
I recently bought a smartwatch with the following specifications:
Amazfit GTS 3 - Model Number: A2035
But I cant use Persian (Or Arabic) Language in this watch. It shows character from left to right and separated.
Is there any trick to fix it?
A screen shot is here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I contacted Amazfit Support team and here is the result:
Hello,
Thank you for contacting Amazfit/Zepp. We are glad to help.
Regarding the language issue, we will release new firmware in recent days, the Arabic language will be supported in this firmware version. please try to check the update and upgrade on the ZEPP APP to see if the problem can be solved. But sorry to tell you that the Persian language is not supported for now, sorry for the inconvenience!
Please feel free to contact us if you need any additional assistance or have any other comments. Cheers and have an excellent day!
Sincerely,
[2022-02-28 10:55:40]
max_leboss said:
I contacted Amazfit Support team and here is the result:
Hello,
Thank you for contacting Amazfit/Zepp. We are glad to help.
Regarding the language issue, we will release new firmware in recent days, the Arabic language will be supported in this firmware version. please try to check the update and upgrade on the ZEPP APP to see if the problem can be solved. But sorry to tell you that the Persian language is not supported for now, sorry for the inconvenience!
Please feel free to contact us if you need any additional assistance or have any other comments. Cheers and have an excellent day!
Sincerely,
[2022-02-28 10:55:40]
Click to expand...
Click to collapse
I have installed the new version but the issue has not been fix yet in spite the fact they say in this version watch supports arabic fonts
Hi Pejman
Yesterday my watch receive an update to firmware 7.38. Persian and Arabic languages is now supported with Persian's special characters "گ - چ - پ - ژ", but its just work when Arabic language is selected as Watch Language. When you select English as watch language, fonts still separated and shows from left to right.
I contacted Amazfit Support one again and they said wait for a new update.
max_leboss said:
Hi Pejman
Yesterday my watch receive an update to firmware 7.38. Persian and Arabic languages is now supported with Persian's special characters "گ - چ - پ - ژ", but its just work when Arabic language is selected as Watch Language. When you select English as watch language, fonts still separated and shows from left to right.
I contacted Amazfit Support one again and they said wait for a new update.
Click to expand...
Click to collapse
I want to buy this watch but I saw your message and now I am hesitated .
Have they said when they would send the update ?
Besides is everything alright in this watch ?
Hi Arash
This watch is really cool. Only language is the problem. I still continue to contact Amazfit Support team and we waiting for new update.
max_leboss said:
Hi Arash
This watch is really cool. Only language is the problem. I still continue to contact Amazfit Support team and we waiting for new update.
Click to expand...
Click to collapse
Thanks .
Can you let me know whenever you get the update and the problem was fixed ?
Arash95 said:
Thanks .
Can you let me know whenever you get the update and the problem was fixed ?
Click to expand...
Click to collapse
By ZEPP app.
max_leboss said:
Hi Pejman
Yesterday my watch receive an update to firmware 7.38. Persian and Arabic languages is now supported with Persian's special characters "گ - چ - پ - ژ", but its just work when Arabic language is selected as Watch Language. When you select English as watch language, fonts still separated and shows from left to right.
I contacted Amazfit Support one again and they said wait for a new update.
Click to expand...
Click to collapse
thank you. the issue hasn't solved yet by the version 7.42.5.1
pejmanp said:
thank you. the issue hasn't solved yet by the version 7.42.5.1
Click to expand...
Click to collapse
You right. My watch running 7.42.5.1 with latest Zepp App software and still same issue. I contacted Amazfit support team today. Waiting for reply. I will share results here.
Today I confirm that my Amazfit GTS 3 with firmware version 7.46.1.1 supports Persian/Arabic language very well.
Thanks dear Amazfit and XDA guys.

Categories

Resources