Hi all
Does anyone having gtr2e global firmware to upload?
I own Chinese and looking to experiment with this bad boy.
Any help full will be much appreciated
Anyone how can upload the firmware?
I have cn running 1.3.6.03
you can't crossflash RTOS devices.
Thanks for your reply
At amazfit bit they manage to flash ,as I read here.
I am willing to try anything, in any case I have it with Chinese language.
I already manage to flash 2 different roms of other versions of gtr2 LTE and esim ,in case that I successfully change the I'd but no have any result.the watch stuck in recovery but doesn't brick. Still in Chinese rom.
If found the global firmware I will try same method as they used to change amazfit bit u
With gadget bridge app.
I Don't care about brick the device
Is there firmware version (or custom firmware) with airplane mode for GTR 2e? To the best of my knowledge GTR 2 has it...
Can someone upload gtr2e global firmware?
I am willing to x3 brick my watch.
There's a telegram group with amazfit roms, but 2e (both GTR and GTS) aren't present there. So still waiting.
Looking for the same. Did you find it ?
Lanex777 said:
There's a telegram group with amazfit roms, but 2e (both GTR and GTS) aren't present there. So still waiting.
Click to expand...
Click to collapse
what is the group name?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone upload the global firmware??
suprim.c said:
what is the group name?
Click to expand...
Click to collapse
huamifw
Global firmware for GTR2e
Lanex777 said:
Global firmware for GTR2e
Click to expand...
Click to collapse
Thank you.
suprim.c said:
Thank you.
Click to expand...
Click to collapse
Thanks very much.
spyrospal said:
Thanks very much.
Click to expand...
Click to collapse
Please share if you are able to flash GTR 2e to this firmware. Mine always fails at 99%
So I have some developments.
From morning time trying to flash all the files,
Tried all the files roatation,but from notify app getting to 99% when trying to flash the .fw file.
When watch becoming brick and when connect to original zepp app,on the sync screen pairing mode I see that the watch and introduction is in English but after sync coming again to Chinese.
Through gadgetbridge I manage to connect to gtr2e, taking the authentication key and adding on the begging of the key -0x in order to connect to the app but when I am trying to flash the files throw the gadget bridge getting the msg ---Element can not be installed"
I believe if I can manage to surpass this ,the job will be done.
Any help would be much appreciated.
Ps I don't care if I will brick my watch,it's crappy Chinese anyway and honesty I not wearing it..
So I have some developments.
From morning time trying to flash all the files,
Tried all the files roatation,but from notify app getting to 99% when trying to flash the .fw file.
When watch becoming brick and when connect to original zepp app,on the sync screen pairing mode I see that the watch and introduction is in English but after sync coming again to Chinese.
Through gadgetbridge I manage to connect to gtr2e, taking the authentication key and adding on the begging of the key -0x in order to connect to the app but when I am trying to flash the files throw the gadget bridge getting the msg ---Element can not be installed"
I believe if I can manage to surpass this ,the job will be done.
Any help would be much appreciated.
Ps I don't care if I will brick my watch,it's crappy Chinese anyway and honesty I not wearing ti
spyrospal said:
So I have some developments.
From morning time trying to flash all the files,
Tried all the files roatation,but from notify app getting to 99% when trying to flash the .fw file.
When watch becoming brick and when connect to original zepp app,on the sync screen pairing mode I see that the watch and introduction is in English but after sync coming again to Chinese.
Through gadgetbridge I manage to connect to gtr2e, taking the authentication key and adding on the begging of the key -0x in order to connect to the app but when I am trying to flash the files throw the gadget bridge getting the msg ---Element can not be installed"
I believe if I can manage to surpass this ,the job will be done.
Any help would be much appreciated.
Ps I don't care if I will brick my watch,it's crappy Chinese anyway and honesty I not wearing it..
Click to expand...
Click to collapse
Now I am trying to flash older version cn and after flashing re,and font in order to try to use it with magical unicorn app if this will change the language
after downgrade cn version to 1.3.1.02
And flashing all the files via notify app ,I manage to install successfully only by the following order the fonts and res from global.
Now I am trying to push the fw somehow.
Can I edit somehow the .fw in order the gadget bridge will allow the installation? Cause I am still getting this element cannot be installed.
I tried all the filemanagers available on playstore.
Cant wait for you to succeed, so I can follow you
Related
Heya,
As a lot of Hebrew native speakers requested, this is a small script to add a Hebrew support to your watches.
This process will add it, BUT the lockscreen will be reversed - שלום will become םולש and will be written from left to right.
I DO NOT take any responsibility for any potential damage caused to your watches, cats, cars or washing machines, do this on your own responsibility.
This is a simple bat file, but ... you will need to be ready.
How? by following these simple steps:
1. Install ADB drivers - https://goo.gl/xGcS4G - do not forget to run the installer as Admin, and verify that you have the drivers installed - please check your device manager for ADB devices.
2. You HAVE to be bootloader unlocked - please read and follow these instructions - https://goo.gl/QVFYBt - note that this WILL VOID YOUR WARRANTY.
3. Download the attached zip file, extract it and hope that your watch won't explode - just make sure that you're selecting the correct option, and wait a little.
I've tested it with the CN recovery, so it should work with the US as well.
The included files are recovery files for US/CN units, created by @Neuer_User , without him this watch would be just another boring and useless watch.
Thank you for your TREMENDOUS CONTRIBUTION to the XDA community!
troubles, problems and other weird demands ... post away !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You're the MAN
worked perfectly!! thank you so much!!
Hi, just tried it after unlocking the bootloader, this is what i got but still no Hebrew, please HELP
Unlocking alone doesn't help, you need to be on "pacified rom"
fzelle said:
Unlocking alone doesn't help, you need to be on "pacified rom"
Click to expand...
Click to collapse
any idea on how to install pacified rom before running this hebrew fix? can u point me to some link please?
idanb007 said:
Hi, just tried it after unlocking the bootloader, this is what i got but still no Hebrew, please HELP
View attachment 4255875
Click to expand...
Click to collapse
Are you expecting the whole watch interface to be changed to Hebrew? If i understand correctly, i don't suppose this script does that. This script adds Hebrew fonts to your watch, so the Hebrew notifications (SMS, whatsapp and others) that you get on your phone shows correctly in your watch. This does not convert your watch language to Hebrew.
And no, you DON'T have be on Pacefied to get the Hebrew support.
Hi @idanb007
This will only add Hebrew reading support, no interface. PACEfied contains the fonts provided by this pack. This will allow you to read messages/emails/whatever that you'll get on your watch, and as I wrote in the first post, the lockscreen notifications will be reversed.
There is no Hebrew interface for the watch, I see no reason for that, you have like 50 words in the entire watch to read.
idanb007 said:
Hi, just tried it after unlocking the bootloader, this is what i got but still no Hebrew, please HELP
View attachment 4255875
Click to expand...
Click to collapse
The watch was suppose to restart after the end of the process and everything should be ok. Have you tried to check Hebrew notifications ? an e-mail or a whatsapp message ?
1immortal said:
The watch was suppose to restart after the end of the process and everything should be ok. Have you tried to check Hebrew notifications ? an e-mail or a whatsapp message ?
Click to expand...
Click to collapse
yes, you right. sorry, didn't see it till now.
it is just strange that the lockscreen notifications are reversed and the notifications are showing fine... i guess it has to do with the RTL support.
that is why I asked for the entire watch Hebrew support, i thought it will resolve the reversed lockscreen notifications issue (even though i don;t need the entire watch text to be in Hebrew...)
Will this work on the amazfit bip ?
Easily I installed Bengali/Bangla font on my amazefit pace
Thank you a lot. Before this, my watch just showed boxes instead of showing Bengali. But now, It shows real Bengali. Just love it.
xoyantajoy said:
Easily I installed Bengali/Bangla font on my amazefit pace
Thank you a lot. Before this, my watch just showed boxes instead of showing Bengali. But now, It shows real Bengali. Just love it.
Click to expand...
Click to collapse
Can you please give me the details procedure?
Good day! Happy New Year to everyone! I apologize for my bad English, I am writing via google translator.
I tried to upgrade the Chinese version of Amazfit Stratos 3 to the global version and ended up with the following problem: the "Amazfit" logo on the screen
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The watch does not respond to abd commands. The message appears: "using port=5555"
Spoiler
I set different drivers, changed usb, cleaned contacts with an eraser.
In devices in windows it looks like this:
Spoiler
When I try to reflash, I write: "waiting for any device"
Spoiler
Please advise how I can restore them!
Thanks to all! and Happy New Year again!
I still managed to enter fastboot mode
The fastboot beats, I can see serial number my stratos.
But my bootloader is locked!
Although the command with the unlock code is accepted, OKay writes, and when checked with the command "fastboot getvar unlocked"
I get "no", i.e. blocked.
Although it was previously unlocked, that's for sure!
Spoiler
What could be the reason and what to do next?
Hum,
Are you sure you've flash the rom for stratos 3??
The boot logo should not be this one. The one you have is from stratos 2....
[QUOTE = "winni21, post: 84204249, member: 3204122"]
Are you sure you've flash the rom for stratos 3??
The boot logo should not be this one. The one you have is from stratos 2
[/ QUOTE]
It is quite possible! How do I get back to factory firmware?
kuzmy4 said:
[QUOTE = "winni21, post: 84204249, member: 3204122"]
Are you sure you've flash the rom for stratos 3??
The boot logo should not be this one. The one you have is from stratos 2
[/ QUOTE]
It is quite possible! How do I get back to factory firmware?
Click to expand...
Click to collapse
Unfortunately that's a big mistake...
I think you can only try using Cloner Tool (check for the thread) to re-flash Stratos 3 original firmware, but I'm not sure if it will work.
Saratoga79 said:
Unfortunately that's a big mistake...
I think you can only try using Cloner Tool (check for the thread) to re-flash Stratos 3 original firmware, but I'm not sure if it will work.
Click to expand...
Click to collapse
Thank you very much for your reply! I will definitely use your advice and study this topic!
Maybe my problem is in the drivers?
For some reason, adb sees my device, but fastboot does not!
Spoiler
Saratoga79 said:
I think you can only try using Cloner Tool (check for the thread)
Click to expand...
Click to collapse
Did I find the topic correctly?
TUTORIAL: Ingenic Cloner tool - Amazfit PACE/Stratos/3/Verge deep flash tutorial
Heya all, As we all seen and know, the PACE/Stratos/Verge(WIP*) devices have 2 flashing modes: 1. Fastboot - where we need an unlocked bootloader for the watch to be able to downgrade/upgrade/flash custom ROMs. 2. ForceErase - the 2nd option...
forum.xda-developers.com
But I can't see screenshots!
I read it. But this is very, very difficult for me! It is unlikely that I can go this way correctly!
Are there no other ways?
If I go to a service shop, will they be able to repair my device?
Still, I was able to do it! Thank you very much for your advice and help, especially Saratoga79!
kuzmy4 said:
Still, I was able to do it! Thank you very much for your advice and help, especially Saratoga79!
Click to expand...
Click to collapse
So you finally fixed it?
Pictures are missing in Cloner Tool thread, but still understable.
Something you may check is your Serial Number (SN) and bootloader status.
Hi all,
After some issues and some decisions, we decided to simplify the unlocking process.
This is relevant for the following devices:
Amazfit PACE - CN and Global one
Amazfit Verge - CN and Global one
Amazfit Stratos a.k.a Stratos 2 - CN and Global one
Amazfit Stratos 3 - CN and Global one
FIRST OF ALL, BOOTLOADER UNLOCK WILL VOID YOUR WARRANTY, TURN YOUR CAN INTO A ZOMBIE, START A WW3 AND WILL RENAME YOU TO SOME RANDOM 172 CHARACTERS NAME.
Due to several decisions - the service/bot is terminated for good.
Use this tool for unlock - https://toolaio.tk/
This thread is NOT a support thread for your flashes gone bad, or your cat getting drunk and buying the entire stock of the Quest 2 on Amazon.
It relates only to unlock issues.
Hello ， this is Hertz from China，thanks for your contribution of amazfit BootLoader unlock work. I have used mailbox cracking before. Now try to get the unlock code on telegram. But there is no reply. can you help me?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bot is back up
Shutting down the service.
Use Pacefied installers or the AIO tool for watch unlock.
How can I unlock my Amazfit Verge now??? Please help
ikimonojc said:
How can I unlock my Amazfit Verge now??? Please help
Click to expand...
Click to collapse
[TOOL] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)
Hello everyone, today I present my new creation: we are talking about a tool that allows you to do many things , from the bootloader to flash the factory image , comfortably. Now you're probably asking: but there are already other tools available...
forum.xda-developers.com
Saratoga79 said:
[TOOL] TOOL ALL IN ONE (Drivers|Unlock|TWRP|Factory Image|Stock Recovery)
Hello everyone, today I present my new creation: we are talking about a tool that allows you to do many things , from the bootloader to flash the factory image , comfortably. Now you're probably asking: but there are already other tools available...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks Saratoga79, I have been trying on this AIO for a few days. It always starts perfectly and I see my Amazfit Verge detected wth Device ID 4b01121b and status is adb device. However, every time I click "Unlock" to procees, my device dissapears in AIO and says "No device detected, pleasse connect a device", the watch showing "FastBoot" with a screen icon, also my destop show up CMD screen and freeze at <waiting for my device>.
verify that you have your drivers installed properly while your watch in fastboot mode, if the app is in its stuck mode, your watch is not detected and probably the drivers are not installed as they should for the fastboot mode.
1immortal said:
verify that you have your drivers installed properly while your watch in fastboot mode, if the app is in its stuck mode, your watch is not detected and probably the drivers are not installed as they should for the fastboot mode.
Click to expand...
Click to collapse
What specific driver is for Amazfit Verge? As ALL in One show my watch properly, I thought the driver is properly installed. Or, what is the proper way to install the driver?
Thanks
this
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
15 seconds ADB Installer v1.4.3 ADB, Fastboot and Drivers What is this? This is All-in-One installer for 3 most needed PC tools for Android. No need to download big SDK for 3 small things. I originaly made it for my Kurdish friend AnGrY DuDe in...
forum.xda-developers.com
and if still failing, install the drivers manually:
Finally able to unlock and install the updated firmware. Thank you very much for everyone's help !!
ikimonojc said:
Finally able to unlock and install the updated firmware. Thank you very much for everyone's help !!
Click to expand...
Click to collapse
brother could you please tell me how unlock bootloader ?
this channel not working anymore
@AmazfitBootloaderUnlockerBot
salhazwara said:
brother could you please tell me how unlock bootloader ?
this channel not working anymore
@AmazfitBootloaderUnlockerBot
Click to expand...
Click to collapse
Follow the link 1immortal provided above. I would say that it is tricky and I still need to try several times. The tool all in one works however once unlocked the watch it will dissapear in the tools and you need to change the driver to bootloader in windows. And once you unlocked the phone you cannot restart the phone since once you restart it relocked again.....yeah it is strange and I somehow keep trying finally get it done. I would say that I just can do it by chance....
salhazwara said:
brother could you please tell me how unlock bootloader ?
this channel not working anymore
@AmazfitBootloaderUnlockerBot
Click to expand...
Click to collapse
Same here. I tried to add the tele account but told it doesn't exist.
can someone help me ? Thank you!
use this tool - https://toolaio.tk/
it's useful tool thank you
Hello Amazfit Stratos 2 with AIO I can't unblock I have root access and I know SN. The drivers are well installed. Thank you for any advice
Have you crossflashed your watch with another rom?
1immortal said:
Have you crossflashed your watch with another rom?
Click to expand...
Click to collapse
With the OTA update 2.3.13 they did not start, they stayed on the log A and then I tried everything I have tried to upload the official rom via the Ingenic Cloner tool
1immortal said:
Have you crossflashed your watch with another rom?
Click to expand...
Click to collapse
I would need to unblock it or load some official ROM that will go to load on the lock bootloader.
And I found out that the unlocking software doesn't see the SN and I can see it via the cmd command
Hiya folks,
I've recently flashed the global ROM onto my originally-China variant Realme GT 5G RMX2202 device -- and I'm wondering if anyone has rooted this thing.
I did some searching and found references to a "Kingroot" APK that does so... but it looks a bit sketchy, so I was hoping anyone who has experience in this department could post what has worked for you
Thanks much!
Cheerio.
怎么刷的，教我，我教你root
Socialism said:
Hiya folks,
I've recently flashed the global ROM onto my originally-China variant Realme GT 5G RMX2202 device -- and I'm wondering if anyone has rooted this thing.
I did some searching and found references to a "Kingroot" APK that does so... but it looks a bit sketchy, so I was hoping anyone who has experience in this department could post what has worked for you
Thanks much!
Cheerio.
Click to expand...
Click to collapse
How did you convert? Does the drm also change to L1?
jayveeleo029 said:
How did you convert? Does the drm also change to L1?
Click to expand...
Click to collapse
There's a massive thread here about the flashing, all instructions I followed are in there. Sorry not sure what you mean by drm changing to L1, I'm not familiar with those terms
Socialism said:
There's a massive thread here about the flashing, all instructions I followed are in there. Sorry not sure what you mean by drm changing to L1, I'm not familiar with those terms
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This one, its a security feature req. By netflix and other streaming apps, with L3 security on china variant netflix doesnt play UHD only Standard
Oh interesting. If you tell me what app that is I can download it and check if you'd like.
Socialism said:
Oh interesting. If you tell me what app that is I can download it and check if you'd like.
Click to expand...
Click to collapse
Hey mang, could you do me a huge solid and tell me if after the ROM change you're able to change the region? I don't have the option on the Chinese Rom and it's annoying the heck out of me. If you do can you link me the thread you used? I found one but not sure if it's the same
I think this is it?
UPDATE - Realme GT Convert China ROM to EU ROM OR Indin ROM
Hi These are the steps that were followed to make the global ROM work for you... Please follow the instructions step by step Try these steps at your own risk and I am not responsible for losing your phone or data 1- You must open the...
forum.xda-developers.com
Socialism said:
Oh interesting. If you tell me what app that is I can download it and check if you'd like.
Click to expand...
Click to collapse
Also you can use this to check the widevine level (from the store):
Device Info: View phone info - Apps on Google Play
View device info, device id, system info, hardware info, And Test Device.
play.google.com
Highly doubt that it'd change from flashing a rom but here it is (under system like in the screenshot)
[RMX2202] Realme GT 5G (UI2.0 & UI3.0) - ALL ROOT
forum.xda-developers.com
Pardon delay; lost my home to a landslide. Le suck.
1) Thanks for the app tip, downloaded and checked, unfortunately it's still L3 security level.
2) After flashing the global ROM I didn't need to change the region; Google Assistant worked!
3) Yes that's the right thread!
Socialism said:
Pardon delay; lost my home to a landslide. Le suck.
1) Thanks for the app tip, downloaded and checked, unfortunately it's still L3 security level.
2) After flashing the global ROM I didn't need to change the region; Google Assistant worked!
3) Yes that's the right thread!
Click to expand...
Click to collapse
Oh crap sorry to hear that mang, hopefully everything is better now. I might convert my chinese version to whatever but not gonna lie Im interested in the android 12 update but just wondering if the google assistant thing is still a problem there...who knows lets see
Thanks bro. I'm in student housing now.. deferred rent.
Yeah I'm gonna wait for the next update or a patch.. don't have the luxury of being possibly unable to use xyz features folks complained about from 12 :|
Socialism said:
Thanks bro. I'm in student housing now.. deferred rent.
Yeah I'm gonna wait for the next update or a patch.. don't have the luxury of being possibly unable to use xyz features folks complained about from 12 :|
Click to expand...
Click to collapse
Lemme ask you something else (or anyone that sees this comment), did you have issues with the Chinese rom where you sometimes missed calls? Like there's no record of the call ever happening as if you had no signal (no missed call in the log, whoever was calling went straight to voicemail, etc) I've been having that issue since day one but since I don't call much it doesn't really bother me, that being said I'm wondering if the international rom would fix that (or the Android 12 update). I've searched around but it does seem like I'm a isolated case
It looks like I made a brick, constant bootloop, enters the recovery but the bootloader is not unlocked, wipe data did not help, tell me, oh yes when connecting to the PC, it is defined only as the port Qualcomm HS-USB QDLoader 9008
Vovtokare said:
It looks like I made a brick, constant bootloop, enters the recovery but the bootloader is not unlocked, wipe data did not help, tell me, oh yes when connecting to the PC, it is defined only as the port Qualcomm HS-USB QDLoader 9008
Click to expand...
Click to collapse
Did you try
adb reboot bootloader
So the bootloader is locked, he doesn't see his PC properly
grown_man said:
Did you try
adb reboot bootloader
Click to expand...
Click to collapse
Vovtokare said:
So the bootloader is locked, he doesn't see his PC properly
Click to expand...
Click to collapse
Then repair service for free (or to find someone who has access to msm tool/ paid service)
So Im on global (CPH2415) I just downloaded the downgrade package for global used it so back on Android 12 then I shut off auto updates and waited for the next day I checked oxygen updater and seen a update for (CPH2417) that was over 4GB so I let it download after saving the file and it let me use the system update app by OnePlus to upgrade into 2417.(if you need me to explain in more detail or tell you exactly how I did it just message me in private message)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
its about time. I was stuck on 2415EU version and now I'm back on 2417NA!
tdamocles said:
its about time. I was stuck on 2415EU version and now I'm back on 2417NA!
Click to expand...
Click to collapse
You got it downloaded and flashed back?
AkayamiShurui said:
You got it downloaded and flashed back?
Click to expand...
Click to collapse
Yes
tdamocles said:
Yes
Click to expand...
Click to collapse
Glad to hear it
Finally! That took forever. I'm flashing back to 2417 currently now as well.
AkayamiShurui said:
So Im on global (CPH2415) I just downloaded the downgrade package for global used it so back on Android 12 then I shut off auto updates and waited for the next day I checked oxygen updater and seen a update for (CPH2417) that was over 4GB so I let it download after saving the file and it let me use the system update app by OnePlus to upgrade into 2417.(if you need me to explain in more detail or tell you exactly how I did it just message me in private message)
View attachment 5780425
Click to expand...
Click to collapse
Is this for the T-Mobile version and what version of Android is it .I have model 2419 and when I try to update my phone or swap to anything but Global Android 12 my apps lock up and says contract phone error and my apps are disabled.
RomLord14495 said:
Is this for the T-Mobile version and what version of Android is it .I have model 2419 and when I try to update my phone or swap to anything but Global Android 12 my apps lock up and says contract phone error and my apps are disabled.
Click to expand...
Click to collapse
How to change regions on Oneplus 10T 5g via Update/Downgrade Packages:
(Moderators, please make this post a sticky, and i will keep it updated of any changes or issues that might come up in future builds, thanks) To clarify things.... I am the dude who figured out how to side-step from model to model... I have...
forum.xda-developers.com
RomLord14495 said:
Is this for the T-Mobile version and what version of Android is it .I have model 2419 and when I try to update my phone or swap to anything but Global Android 12 my apps lock up and says contract phone error and my apps are disabled.
Click to expand...
Click to collapse
So sadly I have had time to look up into the T-Mobile version so that is something I'm a lot of information for but a limit opposed to you that talks about that so hopefully that helps
I am currently on CPH2417_11_A.08 and I want to only go to A.13.. I DO NOT want to update to Android 13 (C.22).. but I cant seem to find this anywhere.. any ideas?
Oppo/Oneplus are systematically scrubbing all traces of the older OTA fw from all the known sites. This is why i havent made any updates to that thread for doing region swaps. My instructions still stand firmly for how its done and whats required, but now its kinda on a peer to peer basis, cuz all the OTA links that are now available anywhere have a new signature check that will make the fw not appear or fail flashing if you try them. But the steps still work... and Creeper36, if you came from a T-mobile original device, you do not want to take that next upgrade ... you CAN go up to A.12 and you will get your 5g , wifi calling, and volte all working... but anything A.13 and above will lock up all your apps and the only way to get the phone working again, is a factory reset, and a rollback. Some security function has been activated that can detect you original device fingerprint, and if you are on ANY fw other than a 2419 build, it triggers the app lock.
Im still working on finding out what needs to be removed from the CarrierDevicePolicy so that this doesnt happen, but i need root access to make progress, and i am on one of the newer 10T that have the Fastboot Protocol disabled. My advice would be to just search thru the oneplus community pages or go to the telegram/discord channels... both are user operated, so you can message someone or just ask the group for the file you want and chances are someone has it, who can help you. I have A.15 but its for the 2415 build. All the fw you find below that version on the common sites (gsm mafia... etc) are packages you will need the msm tool or qfil to flash.
Does this mean I can pull boot from this and finally bl unlock/root my 2417 on Android 13?!
Can someone explain me what is the difference between 2415Global and 2417NA versions of OOS? What is good and of course what is bad? I just flashed my ACE PRO to Global 2415 want to know if it is worth to change to 2417NA? Thanks in advance