I wiped my data and tried to flash a new rom but it always restarts ... Help needed
prvnknj said:
I wiped my data and tried to flash a new rom but it always restarts ... Help needed
Click to expand...
Click to collapse
What are you trying to say??
If you reboot system, it reboots again to twrp??
Just the twrp reboots
prvnknj said:
Just the twrp reboots
Click to expand...
Click to collapse
Can't understand what you say
Twrp reboots every second and not stable??
Related
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
blindox said:
Hello my friends.
I unlocked the BL and install the CWM. So i try to install a new ROM at my Atrix.
I made the installation of the Neutrino V1.4 GT, but after made the installation of the .zip , my atrix got stuck at the boot screen.
So i made the restore of the backup that I already made, and the smartphone starts ok.
After that i tried install other ROM , CM7-ICS-FINAL and I got the same stuck boot screen.
I found other Thread about that same problem, and the user found a solution but he forgot to post that solution, just wrote ''problem solve''.
Anyone know what can i make to install the ROM ? Thanks for your attention
Click to expand...
Click to collapse
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
+1
That would be my guess, the recovery.
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
ghost_og said:
You are most likely using an outdated CWM (my guess would be Tenfar's). If it doesn't support ext4 then any ROM based on CM7 will not boot. Either use the one that comes with ROM Manager, romracer's, or TWRP.
Click to expand...
Click to collapse
live4nyy said:
+1
That would be my guess, the recovery.
Click to expand...
Click to collapse
ltdanno360 said:
yes use romracers recovery
and.wipe data
wipe cache
wipe dalvic.cache in advanced.options
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Be sure to let us know if it worked in case anyone else with the same issue can find the answer much easier.
blindox said:
Thanks for all the support ! I will download the romracers recovery and retry install the new ROM!
Click to expand...
Click to collapse
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
blindox said:
Hello my friends..
I made the install of the romracers recovery.. and i installed the ROM ( Neutrino ROM ).
But Now it gets to the boot up screen that says "Neutrino ROM ... system loading" the screen will black out for a couple seconds and then come right back to that screen in a loop. its been happening for about 15 minutes.
obs : I forgot to make the backup
Thanks for the help!
Click to expand...
Click to collapse
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
hello my friend,
i just made the WIPE CACHE AND WIPE DALVIK CACHE and the install of the ROM.
When i saw the screen NEUTRINO I was happy, until the time the ''system loading" getting black out for a couple seconds and then come right back. I knew there was something wrong.
Now I will make the process again with the factory data reset and then i will post what happened
Thanks
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
live4nyy said:
Did you use the recovery for the factory data reset and wipe cache/dalvik cache? You might want to try fastboot wipe as well.
Click to expand...
Click to collapse
Yes, romracer is recommended. It is the only recovery that is specifically developed for the Atrix 4G. You could also try the TRWP Recovery but romracer's recovery is proven to work well and recommended by most.
Glad everything worked out.
blindox said:
MY FRIEND..
thanks for all the support! I made the again the process with the factory reset and now the ROM is installed correctly.
Let me ask a question. I want to install a new kernel to try the overclock 1.3GHZ. That new kernel can be installed with the romracers ?
Thanks for the attention
**HAPPY NEW YEAR
Click to expand...
Click to collapse
i flash custom rom i my friend's device then i get the boot loop.
I thought stock rom will solve the problem so i used to odin to flash the stock rom.
Stock rom was flashed successfully but again when it booted up then at optimizing app screen it reboots.
Plz help
It does not reboot to recovery. Mobile is simply restarting and boot loop occurs at "optimizing apps".
Click to expand...
Click to collapse
Device is currently at stock rom flashed via odin
Click to expand...
Click to collapse
Try to reflash CWM and then wipe cache and dalvik cache to see if it boots. If it doesn't boot, try to flash another custom rom to see if it boots
freitaz said:
Try to reflash CWM and then wipe cache and dalvik cache to see if it boots. If it doesn't boot, try to flash another custom rom to see if it boots
Click to expand...
Click to collapse
ok going to try this and will tell you if it works or not
And if you or someone else got more methods please post because after flashing stock via odin whole partition was seem to erased and flashed(am i right)
i have got pit file from
http://forum.xda-developers.com/showthread.php?t=2482980
Click to expand...
Click to collapse
will this repair the device.
how does this PIT works.
Does it erase all the partition then create it again and then flash the rom.
is this method is used by the service center
i installed twrp and lazyflash, then rebooted . everything was fine. Then i went back to recovery to install supersu.zip, I installed and then device rebooted... and then stuck at MI logo.. plz help, i am able to go back to twrp.
waiting for the reply
cutecrocodile said:
i installed twrp and lazyflash, then rebooted . everything was fine. Then i went back to recovery to install supersu.zip, I installed and then device rebooted... and then stuck at MI logo.. plz help, i am able to go back to twrp.
Click to expand...
Click to collapse
Flash lazyflasher again.
MyNameIsRage said:
Flash lazyflasher again.
Click to expand...
Click to collapse
checking
MyNameIsRage said:
Flash lazyflasher again.
Click to expand...
Click to collapse
still bootloop, stuck at Mi Logo
cutecrocodile said:
still bootloop, stuck at Mi Logo
Click to expand...
Click to collapse
Do you have a pc?
MyNameIsRage said:
Do you have a pc?
Click to expand...
Click to collapse
yes,
MyNameIsRage said:
Flash lazyflasher again.
Click to expand...
Click to collapse
can i factory reset it from twrp? if that solves my problem
cutecrocodile said:
can i factory reset it from twrp? if that solves my problem
Click to expand...
Click to collapse
You can actually flash a custom rom, and then revert back to miui, this would take time, but is much more easy, and has less chances to permanently brick your device.
MyNameIsRage said:
You can actually flash a custom rom, and then revert back to miui, this would take time, but is much more easy, and has less chances to permanently brick your device.
Click to expand...
Click to collapse
how to do it, i have already downloaded rr rom and cm 14.1
cutecrocodile said:
how to do it, i have already downloaded rr rom and cm 14.1
Click to expand...
Click to collapse
ok, so first of all what you need is the cm firmware and the rom file, and also gapps if u need.
this is the firmware file - https://androidfilehost.com/?fid=817550096634766008
Follow these steps -
1. Copy the firmware and rom file (and gapps if you have) to a place other than your phones internl storage like on an sd card or i you have a pc, then theres no problem, just leave the files on pc.
2. boot to twrp, here go to wipe and then select format data, here type yes and enter - this will wipe your internal storage. after that go back and wipe system, data, cache, dalvik.
3. now if you have a memory card inserted, with the rom files then skip this step, but if you do not,then connect your phone to pc using the data cable and copy the files to internal storage.
4. now firstly install the firmware,then the rom, and then any addons like gapps.
5. now reboot. you will boot to rr.
6. after booting, if you wish to install miui again, head to http://en.miui.com/download.html
and from there download the build you like, (choose redmi note 4x and there the global build)
7. now again boot to twrp, and format data, and wipe data, cache, system and dalvik. now copy the miui file, super su and the lazyflasher file.
8. install miui and lazyflasher, and reboot (it will say 'no os installed' but its fine, just reboot)
9. now after miui has booted, reboot to recovery, and install super su and lazyflasher, this should do it
thank you so much, i did it
super su should be installed first or lazy flash?
cutecrocodile said:
i installed twrp and lazyflash, then rebooted . everything was fine. Then i went back to recovery to install supersu.zip, I installed and then device rebooted... and then stuck at MI logo.. plz help, i am able to go back to twrp.
Click to expand...
Click to collapse
You have to clear dalvik/art cache after flashing supersu.zip and restart. It will boot loop one time and on second time the phone will successfully boot. Now flash lazyflasher and follow the steps again.
Plz help i cannot format my le max 2 using twrp it only wipes davik cache and niether able to install any custom rom Does anyone have solution for this plz?
Itachi212 said:
Plz help i cannot format my le max 2 using twrp it only wipes davik cache and niether able to install any custom rom Does anyone have solution for this plz?
Click to expand...
Click to collapse
What for an error you get when you try to install a rom?
LameMonster82 said:
What for an error you get when you try to install a rom?
Click to expand...
Click to collapse
I am not getting any error while trying to install a rom it just completes in some seconds and when I try to reboot it bootloops
Itachi212 said:
I am not getting any error while trying to install a rom it just completes in some seconds and when I try to reboot it bootloops
Click to expand...
Click to collapse
Have you tried to factory reset. If have already try leaving it for 10+ mins. Usually the first boot takes some time.
LameMonster82 said:
Have you tried to factory reset. If have already try leaving it for 10+ mins. Usually the first boot takes some time.
Click to expand...
Click to collapse
Yea I have tried leaving it for almost 1 hr
And while wiping the data it only wipes the dalvik cache and system cache
Itachi212 said:
Yea I have tried leaving it for almost 1 hr
And while wiping the data it only wipes the dalvik cache and system cache
Click to expand...
Click to collapse
What rom are you trying to install?
LameMonster82 said:
What rom are you trying to install?
Click to expand...
Click to collapse
I tried installing miui 9 and rr rom and i am at small eui
How to fix endless reboot on my lenovo tab? I think i accedentaly erese stock recovery so that i cant factory reset
Chrstphr lee said:
How to fix endless reboot on my lenovo tab? I think i accedentaly erese stock recovery so that i cant factory reset
Click to expand...
Click to collapse
How did the bootloop start exactly and what is the phone's chipset
Hovatek said:
How did the bootloop start exactly and what is the phone's chipset
Click to expand...
Click to collapse
When i tried to flash twrp recovery using adb. It need to reset factory data and i click yes, and when it start erasing stock recovery untill it stuck and i tried to reboot. But it won't end rebooting.
Chrstphr lee said:
When i tried to flash twrp recovery using adb. It need to reset factory data and i click yes, and when it start erasing stock recovery untill it stuck and i tried to reboot. But it won't end rebooting.
Click to expand...
Click to collapse
Are you trying to say the phone got bricked after you unlocked bootloader? or was it when you flashed TWRP in fastboot?
At what point exactly