First sorry, i'm french.
So I've installed AIO Theme Expander package for substratum. It worked fine then I decide to uninstall it. It's now very bad.
My phone is on a bootloop. Seeing the Lineage OS booting animation for infinity. I try Power + Volume UP, nothing, just bootloop of lineage; same with Volume DOWN.
So I try to let the phone in bootloop to test adb or fastboot on my computer, nothing, no devices detected.
What can I do?
LG G4 - Lineage OS 14.1 latest
reset and reflash os
EnderRaider said:
First sorry, i'm french.
So I've installed AIO Theme Expander package for substratum. It worked fine then I decide to uninstall it. It's now very bad.
My phone is on a bootloop. Seeing the Lineage OS booting animation for infinity. I try Power + Volume UP, nothing, just bootloop of lineage; same with Volume DOWN.
So I try to let the phone in bootloop to test adb or fastboot on my computer, nothing, no devices detected.
What can I do?
LG G4 - Lineage OS 14.1 latest
Click to expand...
Click to collapse
First of all you need to do a hard reset of your phone. if your recovery is working then flash a new rom and then a new kernel.
secondly if there is no recovery then connect your phone to pc and flash one via odin. note : if odin does not detect your phone, you need to drain your battery to 0% then connect it to pc then odin should detect it and flash the rom and bootimage asap.
at last if nothing works, you have 2 options : service centre method or manual method
1. go to service centre and send the phone to repair. they can fix such problems easily even if your phone is rooted because this happened with me a long time ago when my samsung phone got bootlooped and it was rooted with warranty void. But the service centre fixed it for me for free and no objection.
2.MANUAL METHOD : DO AT YOUR OWN RISK!
FOR THIS YOU NEED TO BE GOOD AT HARDWARE.
GO TO GOOGLE AND SEARCH RESET PHONE HARDWARE AND YOU WILL GET THE ANSWER
thanks and i hope this helps you.
news
THEHACKER609 said:
First of all you need to do a hard reset of your phone. if your recovery is working then flash a new rom and then a new kernel.
Click to expand...
Click to collapse
So I try flashing a .kdz then my lineage os with twrp... And it worked ! BUT no torch lamp (idk the english name), no sensors and others glitches appears on my phone since. Maybe have I installed the wrong .kdz?
https://forum.xda-developers.com/g4...tock-firmware-to-stock-kdz-t3107848?nocache=1
I installed the europe open h81510d but on my LGUP it's this:
H81510C STANDBY
Maybe I need to install h81510c? But the problem is which kdz choose, my phone is from amazon so idk the country (europe or france i guess)
EnderRaider said:
So I try flashing a .kdz then my lineage os with twrp... And it worked ! BUT no torch lamp (idk the english name), no sensors and others glitches appears on my phone since. Maybe have I installed the wrong .kdz?
https://forum.xda-developers.com/g4...tock-firmware-to-stock-kdz-t3107848?nocache=1
I installed the europe open h81510d but on my LGUP it's this:
H81510C STANDBY
Maybe I need to install h81510c? But the problem is which kdz choose, my phone is from amazon so idk the country (europe or france i guess)
Click to expand...
Click to collapse
Probably choose the europe one. Amazon shipments are from europe. For other glitches, just install gapps from google.
As of the H81510D, you should install the one which is on your phone else you will end up with major problems.
Which one?
THEHACKER609 said:
Probably choose the europe one. Amazon shipments are from europe. For other glitches, just install gapps from google.
As of the H81510D, you should install the one which is on your phone else you will end up with major problems.
Click to expand...
Click to collapse
Europe H81520C_00_1218.kdz
H81510C_00_2.kdz
France H81520g_00_0720.kdz
EnderRaider said:
Europe H81520C_00_1218.kdz
H81510C_00_2.kdz
France H81520g_00_0720.kdz
Click to expand...
Click to collapse
Go for the 1st one. That should work pretty fine.
Related
After installing Viper4Android by following step by step on the setup guide, rebooted my phone Hisense u971 screen displayed the orange logo then black and side buttons vibrate when pressed and nothing else only a black display.
I can still access recovery mode and i have done factory reset to no luck
I am looking where to download device rom so i can maybe flash again from sd card but i cant find anywhere to download
I have also contacted manufacturer and retailer also with no luck
Any help will be much appreciated
update
flint2501 said:
After installing Viper4Android by following step by step on the setup guide, rebooted my phone Hisense u971 screen displayed the orange logo then black and side buttons vibrate when pressed and nothing else only a black display.
I can still access recovery mode and i have done factory reset to no luck
I am looking where to download device rom so i can maybe flash again from sd card but i cant find anywhere to download
I have also contacted manufacturer and retailer also with no luck
Any help will be much appreciated
Click to expand...
Click to collapse
Manage to find rom download for the phone but when i try to download it just say signature failed aborted in stock recovery
anyone help please
Solved
Rom was rather a fastboot install using computer and cable after, than using install from sd card using recovery
so sorted
flint2501 said:
Rom was rather a fastboot install using computer and cable after, than using install from sd card using recovery
so sorted
Click to expand...
Click to collapse
Hi there flint, where did you get the ROM? And is it the European version? Please I beg you I need a link to download it as I got an ROM from the needrom website and it is the Chinese version which in turn messed up my camera software and no matter how many times I reinstall or clear data/cache or factory reset it, it just doesn't seem to work, even tried different galleries and cameras and moved them into /system/data. I was not being smart and did not do a backup and now I'm stuck with this issue. Please help.
hi
Reaper5639 said:
Hi there flint, where did you get the ROM? And is it the European version? Please I beg you I need a link to download it as I got an ROM from the needrom website and it is the Chinese version which in turn messed up my camera software and no matter how many times I reinstall or clear data/cache or factory reset it, it just doesn't seem to work, even tried different galleries and cameras and moved them into /system/data. I was not being smart and did not do a backup and now I'm stuck with this issue. Please help.
Click to expand...
Click to collapse
Hi where did you buy your handset?.
Mine was from China hence it did work
Did you keep any screenshots to external sd card from when your handset was working (about phone build number etc ) page or at least did you keep a note of these details ?
flint2501 said:
Hi where did you buy your handset?.
Mine was from China hence it did work
Did you keep any screenshots to external sd card from when your handset was working (about phone build number etc ) page or at least did you keep a note of these details ?
Click to expand...
Click to collapse
Hi there, unfortunately I did not, bought the phone in South Africa. Build no was roughly W1003.6.03.... something along those lines. It was the most up to date version
Hisense u971
Reaper5639 said:
Hi there, unfortunately I did not, bought the phone in South Africa. Build no was roughly W1003.6.03.... something along those lines. It was the most up to date version
Click to expand...
Click to collapse
Hey if you bricked your u971 try this. while phone is off hold volume + and plug in usb cable that is connected to your computer. it will get into fastboot now flash the chinese rom and your phone is back to life. i am still looking on how to backup the existing rom so i can put back the european version back from another phone.
hisense hacker said:
Hey if you bricked your u971 try this. while phone is off hold volume + and plug in usb cable that is connected to your computer. it will get into fastboot now flash the chinese rom and your phone is back to life. i am still looking on how to backup the existing rom so i can put back the european version back from another phone.
Click to expand...
Click to collapse
the problem is the camera that does not work ...
Dear friends
My phone was delivered with some SuperSU, and some days ago when it asked to be updated, I accepted that option and after the phone/SIM couldn't connect to the network so I could only make emergency calls.
After reading several articles on this site, I've tried to flash through Odin 3 several times, but every time when the phone reboots, it first erases something with Android logo and after that is stuck at Samsung logo picture and nothing happens. As mentioned, I have tried to do this activity several times but nothing helps. What can be done now to proceed?
Model is SM-G925F and I downloaded the firmware from Sammobile (SM-G925F/PAK/), and its following version which I have been trying with:
5.1.1: G925FXXU3COJ1_G925FOJP3COJ1_G925FXXU3COI9_HOME.tar-md5
Thanks.
Adeal81 said:
Dear friends
My phone was delivered with some SuperSU, and some days ago when it asked to be updated, I accepted that option and after the phone/SIM couldn't connect to the network so I could only make emergency calls.
After reading several articles on this site, I've tried to flash through Odin 3 several times, but every time when the phone reboots, it first erases something with Android logo and after that is stuck at Samsung logo picture and nothing happens. As mentioned, I have tried to do this activity several times but nothing helps. What can be done now to proceed?
Model is SM-G925F and I downloaded the firmware from Sammobile (SM-G925F/PAK/), and its following version which I have been trying with:
5.1.1: G925FXXU3COJ1_G925FOJP3COJ1_G925FXXU3COI9_HOME.tar-md5
Thanks.
Click to expand...
Click to collapse
What android version was the phone on before you flashed the firmware? 5.1.1 or 6.0.1?
How long did it stay on the samsung logo? Was the led lit up blue?
Power off phone.
Once off hold vol up + power + home together.
Keep holding them buttons and phone will boot into recovery.
Once in recovery wipe cache partition and wipe data/factory reset.
Try that first it should work.
Keep me updated
Thanks bro, tried this and it didn't help.
However, I discovered following error message:
dm-verity verification failed...
Need to check DRK first...
I think it was 5.1.1. before flashing. And the Samsung logo is there for hours...haven't tried days though.
callumbr1 said:
What android version was the phone on before you flashed the firmware? 5.1.1 or 6.0.1?
How long did it stay on the samsung logo? Was the led lit up blue?
Power off phone.
Once off hold vol up + power + home together.
Keep holding them buttons and phone will boot into recovery.
Once in recovery wipe cache partition and wipe data/factory reset.
Try that first it should work.
Keep me updated
Click to expand...
Click to collapse
Adeal81 said:
Thanks bro, tried this and it didn't help.
However, I discovered following error message:
dm-verity verification failed...
Need to check DRK first...
I think it was 5.1.1. before flashing. And the Samsung logo is there for hours...haven't tried days though.
Click to expand...
Click to collapse
Next thing to try if i was you would he to flash a 6.0.1 firmware. The UK BTU is a good one to flash it fixes a lot of errors.
Adeal81 said:
Dear friends
My phone was delivered with some SuperSU, and some days ago when it asked to be updated, I accepted that option and after the phone/SIM couldn't connect to the network so I could only make emergency calls.
After reading several articles on this site, I've tried to flash through Odin 3 several times, but every time when the phone reboots, it first erases something with Android logo and after that is stuck at Samsung logo picture and nothing happens. As mentioned, I have tried to do this activity several times but nothing helps. What can be done now to proceed?
Model is SM-G925F and I downloaded the firmware from Sammobile (SM-G925F/PAK/), and its following version which I have been trying with:
5.1.1: G925FXXU3COJ1_G925FOJP3COJ1_G925FXXU3COI9_HOME.tar-md5
Thanks.
Click to expand...
Click to collapse
Its a minor prolem u can flash twrp and with twrp u can clear data and flash custom kernel for eg arter kernel etc u should be out of bootloop u can use your sd card or an usb flash drive best of luck
callumbr1 said:
Next thing to try if i was you would he to flash a 6.0.1 firmware. The UK BTU is a good one to flash it fixes a lot of errors.
Click to expand...
Click to collapse
Tried, but didn't help unfortunatelt. Get following error message: Device does not have DRK, please install DRK first.
Krishhacker said:
Its a minor prolem u can flash twrp and with twrp u can clear data and flash custom kernel for eg arter kernel etc u should be out of bootloop u can use your sd card or an usb flash drive best of luck
Click to expand...
Click to collapse
Thanks for the suggestion, I tried but didn't help.
arter97-recovery-g925fi-22.0-twrp_3.0.2-0.tar.md5
Adeal81 said:
What can be done now to proceed?
Model is SM-G925F and I downloaded the firmware from Sammobile (SM-G925F/PAK/), and its following version which I have been trying with:
5.1.1: G925FXXU3COJ1_G925FOJP3COJ1_G925FXXU3COI9_HOME.tar-md5
Thanks.
Click to expand...
Click to collapse
Update it using Samsung Smart Switch.
Update to mm ROM
What actually worked in the end was "SpaceX-Kernel_MM_RC2.1_G925F.tar.md5". Thanks to all suggestions.
However, I am back to the original problem now. The phone cannot use any service provider, tried with both foreign and local Norwegian sim. It simply says that only emergency calls possible. This was the initial problem which I tried to solve by flashing ROM.
Any suggestions regarding how to deal with this?
Adeal81 said:
What actually worked in the end was "SpaceX-Kernel_MM_RC2.1_G925F.tar.md5". Thanks to all suggestions.
However, I am back to the original problem now. The phone cannot use any service provider, tried with both foreign and local Norwegian sim. It simply says that only emergency calls possible. This was the initial problem which I tried to solve by flashing ROM.
Any suggestions regarding how to deal with this?
Click to expand...
Click to collapse
Sounds like corrupted efs folder.... if so its very hard to revive and im yet to know of anybody who has fixed it. Good luck keep us updated
Hi.
A college of mine gave Me its grandchild phone to take a look. It was a gift from father (divorced couple) and it is full(was) whit viruses. System crashes all the time, Kingroot and SuperSu whit god knows what else and I think that OS is damaged. Factory reset didn't help as I did it from recovery menu. On first boot phone didn't boot and hang on boot animation. After pulling battery and inserting it back phone booted in main screen whit all it issues again.
My question is can someone know where I can find firmware for this phone and how to flash it? I can't find it anywhere because phone look China generic and is Australian Operator branded. Model Nr is khphn05anda. Even some custom ROM would be fine whit ok performance as phone will be used for games only.
netmaniack said:
Hi.
A college of mine gave Me its grandchild phone to take a look. It was a gift from father (divorced couple) and it is full(was) whit viruses. System crashes all the time, Kingroot and SuperSu whit god knows what else and I think that OS is damaged. Factory reset didn't help as I did it from recovery menu. On first boot phone didn't boot and hang on boot animation. After pulling battery and inserting it back phone booted in main screen whit all it issues again.
My question is can someone know where I can find firmware for this phone and how to flash it? I can't find it anywhere because phone look China generic and is Australian Operator branded. Model Nr is khphn05anda. Even some custom ROM would be fine whit ok performance as phone will be used for games only.
Click to expand...
Click to collapse
+1
Jimmy Mossiba Floyd said:
+1
Click to expand...
Click to collapse
I dumped FW and cleaned up it myself whit multiple antivirus programs and after that system seems to be clean and working fine. It was a while ago so don't ask how to flash this. I believe You have to install custom recovery.
https://failiem.lv/u/cpfvqfnx
Hello,
I've got an V10 H961N HKG and i used bridge to update to android 7.0 however that won't work.
Then i rolled back to 6.0 and it worked again.
then i updated to 7.0 with uppercut and i get the same problem. can it be fixed?
When on 7.0 it goes to erasing for just a second and then shows the lg logo and then the animation but the lg animation keeps crashing and restarting the phone.
I tried both 30A and 30B variants no result.
TrueFawkes said:
Hello,
I've got an V10 H961N HKG and i used bridge to update to android 7.0 however that won't work.
Then i rolled back to 6.0 and it worked again.
then i updated to 7.0 with uppercut and i get the same problem. can it be fixed?
When on 7.0 it goes to erasing for just a second and then shows the lg logo and then the animation but the lg animation keeps crashing and restarting the phone.
I tried both 30A and 30B variants no result.
Click to expand...
Click to collapse
Did you try to backup everything, then factory reset then update ?
Envoyé de mon LG-H990 en utilisant Tapatalk
oliwek said:
Did you try to backup everything, then factory reset then update ?
Click to expand...
Click to collapse
Not yet the phone however had nothing installed on it besides the apps that come with it, why would that work? (before i go and lose a whole lot of time again).
TrueFawkes said:
Not yet the phone however had nothing installed on it besides the apps that come with it, why would that work? (before i go and lose a whole lot of time again).
Click to expand...
Click to collapse
hard reset it, when update to 7.0 with the phone off press and keep holding volume down (dont release it) and then hit power and when phone vibrate release power and when LG logo came on press and keep pressing power...after that a window will pop out, use volume keys to navigate up and down and power to confirm, select yes that two windows that will appear and you done.
this is a hard reset.
sun_is_shinning said:
hard reset it, when update to 7.0 with the phone off press and keep holding volume down (dont release it) and then hit power and when phone vibrate release power and when LG logo came on press and keep pressing power...after that a window will pop out, use volume keys to navigate up and down and power to confirm, select yes that two windows that will appear and you done.
this is a hard reset.
Click to expand...
Click to collapse
Thank you,
I hard reset it before the upgrade to 7.0 and after installing 7.0 but the problem still persists, it still crashes at the LG animation.
One thing i also notice is that in LGUP the version stays at H961N20T, instead of the 30A that should be installed.
TrueFawkes said:
Thank you,
I hard reset it before the upgrade to 7.0 and after installing 7.0 but the problem still persists, it still crashes at the LG animation.
One thing i also notice is that in LGUP the version stays at H961N20T, instead of the 30A that should be installed.
Click to expand...
Click to collapse
did you download the right KDZ to flash in LGUP?
user UPPERCUT tool instead of LGUP, it solve most of the problems, works the same way as LGUP.
download this firmware: https://lg-firmwares.com/download-file/?fileId=9897
search in google for "uppercut xda" in google and you find it easy here..download and flash the firmware above and i think you are solved.
sun_is_shinning said:
did you download the right KDZ to flash in LGUP?
user UPPERCUT tool instead of LGUP, it solve most of the problems, works the same way as LGUP.
download this firmware: https://lg-firmwares.com/download-file/?fileId=9897
search in google for "uppercut xda" in google and you find it easy here..download and flash the firmware above and i think you are solved.
Click to expand...
Click to collapse
I already use uppercut.
and i also used that firmware but i'll try again
sun_is_shinning said:
did you download the right KDZ to flash in LGUP?
user UPPERCUT tool instead of LGUP, it solve most of the problems, works the same way as LGUP.
download this firmware: https://lg-firmwares.com/download-file/?fileId=9897
search in google for "uppercut xda" in google and you find it easy here..download and flash the firmware above and i think you are solved.
Click to expand...
Click to collapse
It still crashes at the animation.
It seems like this phone is allergic to anrdoid 7.0.
The thing that i find strange is that in uppercut the version number of the phone stays on H961N20T even after upgrading.
TrueFawkes said:
It still crashes at the animation.
It seems like this phone is allergic to anrdoid 7.0.
The thing that i find strange is that in uppercut the version number of the phone stays on H961N20T even after upgrading.
Click to expand...
Click to collapse
try to flash 6.0 and then do a factory reset after flash the 6.0, dont set anything in the phone leave it untouched...turn off the phone after that, with the finger in volume down hold it and connect the phone to the usb on PC, they go into download mode and flash the 7.0.
again when flash it do another factory reset, see if this solve the problem...if not you may have some problem with mainboard of the phone.
sun_is_shinning said:
try to flash 6.0 and then do a factory reset after flash the 6.0, dont set anything in the phone leave it untouched...turn off the phone after that, with the finger in volume down hold it and connect the phone to the usb on PC, they go into download mode and flash the 7.0.
again when flash it do another factory reset, see if this solve the problem...if not you may have some problem with mainboard of the phone.
Click to expand...
Click to collapse
I already did this, multiple times now.
It won't work and i think it has something to do that also causes the problem of the version number not updating in uppercut.
Hello,
I've purchased a Galaxy Tab S6 (SM-T865N) International version, mainly to use it with with 4G in US on Xfinity Mobile. I received the tablet, inserted the SIM card and it was working 'relatively' on the network. Every now & then I would get a message 'failed to register to network', but for the most part, mobile data is working.
Since it is a Korea version, certain things don't work. Nothing major, but I would like to make it perfect. Certain User update posts in the Galaxy store display in Korean Language, and the weather app is slightly limited, with the error 'not available outside of Korea'.
I did some searching and found other firmware available for this exact model on Sammobile. My country (US) is not supported, but I would like to try the UK firmware, if nothing else, to fix some of the language issues. I downloaded the UK firmware package and Odin (3.13 & 3.14.1). I installed the Samsung drivers. I booted the tablet into recovery by holding 'power & volume up' then connected it to the computer. Odin WILL NOT found the tablet. I rebooted into the normal OS and connected it and Odin then found it, but obviously that doesn't work. I can not get Odin to connect while in recovery.
Does anyone have suggestions on what might be happening?
And maybe all this effort isn't worth it either, hard telling whether it'll work better or worse with the UK firmware on it. Any tips?
It's been several years since I did this sort of thing, so I'm a little rusty. I thought this would be a simple procedure.
it sounds to me like you are not putting it into download / Odin mode, but I could be wrong. I haven't tried to use Odin on this tablet yet, but was actually about to do this same thing as well, as my device has an origin CSC of singapore, and hasn't had an official update in almost 2 months, so I was going to flash the UK version as well.
---------- Post added at 07:58 PM ---------- Previous post was at 07:51 PM ----------
So I just tested it on my tablet, here is what you need to do:
Power off the device
Press and hold the Volume up button and then press and hold the power button
When you see the initial boot screen, release the power button, but keep holding volume button
When you get to the recovery screen, you need to use the volume up / down buttons to highlight the option that has "bootloader" in the title, and press the power button to select it.
Then you should see a screen that says "Download" or something like that.
Plug in USB, and Odin should see the device.
Yeah, you're booting into recovery, you need to boot into Download mode - Hold both volume up and down whilst inserting the USB-C cable to enter Download mode.
Your correct
bartleby999 said:
Yeah, you're booting into recovery, you need to boot into Download mode - Hold both volume up and down whilst inserting the USB-C cable to enter Download mode.
Click to expand...
Click to collapse
Your Correct. Device needs to be plugged into the pc for it to boot to the screen that shows all the info. I wonder why they made this a requirement. Its very unintuitive. I also didn't see it documented anywhere. How did you find out about this ? Thanks again for the help!
naruto.ninjakid said:
Your Correct. Device needs to be plugged into the pc for it to boot to the screen that shows all the info. I wonder why they made this a requirement. Its very unintuitive. I also didn't see it documented anywhere. How did you find out about this ? Thanks again for the help!
Click to expand...
Click to collapse
You wouldn't happen to have that firmwire file handy / a way to share it online would you? Sammobile's free download server is down right now, and I was going to try to flash it this weekend.
naruto.ninjakid said:
Your Correct. Device needs to be plugged into the pc for it to boot to the screen that shows all the info. I wonder why they made this a requirement. Its very unintuitive. I also didn't see it documented anywhere. How did you find out about this ? Thanks again for the help!
Click to expand...
Click to collapse
I did a lot of reading before I rooted this Tab and that piece of Info came from This thread.
fallingup said:
You wouldn't happen to have that firmwire file handy / a way to share it online would you? Sammobile's free download server is down right now, and I was going to try to flash it this weekend.
Click to expand...
Click to collapse
Sorry, I dont. I meant to make that post in another thread. I have not flashed anything on my device yet.
I have the same Korean model SM-T865N 4G LTE version with the latest firmware.
Can I flash it using Odin with the latest frimware for UAE?
I mean the one with CSC code XSG (XSG - United Arab Em)
AP VERSION T865XXU2BTC7
CSC VERSION T865OJM2BTC7
Besides i have another issue with my speakers as they are not working for some reason? I tried reset both soft and hard without luck. It always get stuck on rebooting many times but after many times i got it to reboot BUT i can only have sound from bluetooth headphones!!
buafnan said:
I have the same Korean model SM-T865N 4G LTE version with the latest firmware.
Can I flash it using Odin with the latest frimware for UAE?
I mean the one with CSC code XSG (XSG - United Arab Em)
AP VERSION T865XXU2BTC7
CSC VERSION T865OJM2BTC7
Besides i have another issue with my speakers as they are not working for some reason? I tried reset both soft and hard without luck. It always get stuck on rebooting many times but after many times i got it to reboot BUT i can only have sound from bluetooth headphones!!
Click to expand...
Click to collapse
Did you able to flash that firmware on your tablet?
IF you mean did I succeed in flashing it through Odin then yes BUT unfortunately I couldn't get it to reboot correctly & it takes a lot of time trying to reboot but still no luck. So, I took it to a repair shop & they told me it needs new motherboard !! How can this be even possible IF I still can get it to connect to Odin and download the firmware successfully BUT no luck in getting it to reboot correctly!!
buafnan said:
IF you mean did I succeed in flashing it through Odin then yes BUT unfortunately I couldn't get it to reboot correctly & it takes a lot of time trying to reboot but still no luck. So, I took it to a repair shop & they told me it needs new motherboard !! How can this be even possible IF I still can get it to connect to Odin and download the firmware successfully BUT no luck in getting it to reboot correctly!!
Click to expand...
Click to collapse
Have you tried reflashing the old firmware of your country? Weird that its not working.
I did try that and managed to flash it successfully to the old firmware using Odin but unfortunately I still couldn't get it past a full reboot as it got stuck after a long time and it takes me to the Android System Recovery screen wherein also tried to 'wipe cache partition.’ and try reboot again but I still end up with the recovery screen!
buafnan said:
I did try that and managed to flash it successfully to the old firmware using Odin but unfortunately I still couldn't get it past a full reboot as it got stuck after a long time and it takes me to the Android System Recovery screen wherein also tried to 'wipe cache partition.’ and try reboot again but I still end up with the recovery screen!
Click to expand...
Click to collapse
Can't you put in a warranty claim ? Here where i am based i had a new battery, and new screen installed from samsung! this was a Galaxy S8+ was well over 2 years old they did it for free! New screen and new battery! My Note 9 is going this monday for a new battery my Tab S6 works flawlessly so don't need to send that in! but i'm sure if you ring up Samsung they will replace the motherboard for free as it's not even 12 months old!