Hey guys I got this wierd black error screen, it only appears when rebooting the phone or into recovery.
Is this related to bad software or is it hardware related?
First time it appeared while browsing. But it never appeared again except when rebooting.
The reason Im asking I want to know if it has to do anything with my physically broken SIM and microSD slots.
PS. I'm 100% stock with locked bootloader.
Sorry for bad screenshot I used my friend's old phone.
Related
Hello, my HD2 started entering the re-boot loop probably because of overheating (I live in a warm country and it started showing problems during the summer). After that, I installed the new official rom from the HTC website (finding a SN online :S) after trying to install the new rom I realised I shouldn't have tried that since it wasn't made for my SN. Anw after that the phone is kind of dead, freezes at the HTC boot screen. I have installed HSPL 1.42 on it but I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. (after such an error on the startup screen I still see the HTC logo but this time with black and white stripes covering the screen). I can't seem to find something similar in the other posts, I hope it wasn't answered somewhere previously. Even if so please redirect me or tell me what else to try since I'm quite frustrated!.. Please explain thoroughly because it's been a while since I was into hd2 tech stuff. Thank you in advance!
PS: Can I somehow find what rom I currently have IF there is one installed? I'm lost here....
t45o5 said:
Hello, my HD2 started entering the re-boot loop ...........................Anw after that the phone is kind of dead, freezes at the HTC boot screen. ................I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. .
Click to expand...
Click to collapse
check the battery pins. ive read of people for whom it is possible to get into bootloader, and it seems like normal, but then it fails to load when trying to boot fully, usually a reboot loop.
forget about finding what rom is on there currently, its time wasted, really.
a better use of your time is using your serial to find out which rom the htc website will let you have, and flash that, from sd card preferably.
Why not just reset the phone, and start over?
found a good rom, installed it via sd card, still reboot loop. that make me think that the problem might be the battery pins. if so what's the solution?
same thing happend to me just adjust the pins
Foxanax said:
same thing happend to me just adjust the pins
Click to expand...
Click to collapse
how do you adjust the pins? They're supposed to be straight right?
t45o5 said:
Hello, my HD2 started entering the re-boot loop probably because of overheating (I live in a warm country and it started showing problems during the summer). After that, I installed the new official rom from the HTC website (finding a SN online :S) after trying to install the new rom I realised I shouldn't have tried that since it wasn't made for my SN. Anw after that the phone is kind of dead, freezes at the HTC boot screen. I have installed HSPL 1.42 on it but I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. (after such an error on the startup screen I still see the HTC logo but this time with black and white stripes covering the screen). I can't seem to find something similar in the other posts, I hope it wasn't answered somewhere previously. Even if so please redirect me or tell me what else to try since I'm quite frustrated!.. Please explain thoroughly because it's been a while since I was into hd2 tech stuff. Thank you in advance!
PS: Can I somehow find what rom I currently have IF there is one installed? I'm lost here....
Click to expand...
Click to collapse
Hi,
Did you find any solution for that problem?
Thnx
Please help me, I played around with BBs yesterday and lost radio, so installed a stock FW with FlashTool, and got radio back again, but on some 4x BB.. Wanted the new 58 BB, and found out that a .. ..0.16 FW would give me that, so installed the polish one (found no other), and after that no response when touching the screen!
xRecovery is of course gone after "stocking" (also rooting?), but I have tried a number of FWs for FlashTool, and even FW directly from S-E using Update Service, but still my phone is next to bricked.. I am n00b and could very well have done something wrong unknowingly, and/or overlooked something, but what might that be, and what are my options?
Sounds like corrupted FW. Not a big deal cause without a cracked Bootloader, you realy can't screw the phone up.
Turn phone completely off.
Pop Battery - SIM card - Micro-SD card out.
Let it sit for a few minutes.
While your letting it sit, take your Micro SD card and Format it using your PC.
"not saying this is your issue but I have had the phone lock up and appear to be unresponsive due to a corrupt file on the SD Card and it fails to mount and gets stuck." If you have any files you want to save, copy them to your PC Hard Drive.
Reinsert your SD Card - Sim Card.
Plug your USB cord into your phone " LEAVE THE BATTERY OUT "
Start up SEUS " Sony Erricson Update Service ".
While holding the back button, reinsert the battery.
Follow the instructions and restore the phone to factory settings.
I hope this works for you as this should elliminate any problems that could have or would be occuring prior. If it doesn't, shoot me a mail and I will get with you on messenger for trouble shooting.
_-_- Press Thanks if its useful-_-_
Nope, didn't do it, touched the thanks-bottom anyway, because on my PC I can...
PM'ed xKrisx, but everybody are welcome with suggestions as I'm completely lost without my phone!
Edit while waiting, hoping:
Followed instructions above several times now, except
xKrisx said:
.. .. .. and restore the phone to factory settings.
Click to expand...
Click to collapse
no such option, wouldn't that be S-E-Android 1.6 ? In fact I see no other options in SEUS than accepting (or not) uneditable choices towards an update -and done-, so I suppose that's what was meant(?)!
Have tried a number of slight variations including SEUS update without sim and SD at all (was actually allowed that), but most noticeable difference was that first boot pre-choose English instead of Danish (my language), and still no response from touch screen, so can't select anything at all!
My phone shows evidence of "moderate physical pressure" (bought second hand with one corner missing), so I can't totally reject the possibility of a sudden HW digitizer breakdown though I think that would more likely have occurred while phone in use than while sitting on my mouse-pad.. No matter what, I would really like to exclude any SW related errors before moving to torx-driver surgery! Plz help guys!
Hi seek4
Did you ever find a solution for your touchscreen?
Hello all,
I got a Ray last week, unlocked it, rooted it, put MIUI rom on everything went fine.
However today, the screen suddenly stopped responding completely. I pulled the battery out, back in, nothing. I re-flashed the rom, nothing then re-flashed the stock rom still nothing at all.
I tried to relock (in case i have to send it back to my operator and also try the automatic push thing from blendmiui) the bootloader but i got a failure in flashtool.
I can t do anything with it and can not mount the SD card to put an other rom in it.
So basically now i got the stock rom which boots, the power and home buttons work, but that s pretty much it.
Does anyone have an idea ?
well that looks more like a hardware problem on the touch pannel, not related to ROM whatsoever.
Apart from sending it to repair ... I don't see any solution :-(
Aww that s what i was scared of ... Do you know by any chance if the warranty will take care of this ? Knowing that i unlocked the BL ?
Yes I think, you didn't brick your phone (software), if it's an hardware problem unlocked bootloader will not change anything concerning the warranty.
Had this phone for a while rooted it and everything was fine, then after replacing the phone i gave it away to a friend. Weeks later my friend asks for help saying it just sits on the AT&T logo, i take it and fiddle with it for a while.
My problems are
1.Wont boot past first splash screen.
2. Wont go into hboot if i try one of two things happens
1. If a sd card is in it a screen saying Firmware update Step 1/2 Unpacking then at the bottom it says update failed and sits on this screen.
2. If no sd card is in it will display a bright pink screen and just sit there
It was rooted
I have no idea what my friend did but suspect he isnt the culprit
different sd cards do not change anything
I have exhausted my knowledge about android and would like any advice.
I've been very frustrated, its only been like 1 year since I bought it. First, I got bootloop out of nowhere after updating (I got bootloop just 1 week after i picked up the phone from service center, the audio jack was broken at that time), then the phone is not detected on any pc. I tried downgrading from SD card, and it works at first, then the phone restarted itself, then I got bootloop again. I tried the same method (upgrading and then downgrading) then it showed warning that the phone is in Red State when i entered Android Recovery. It says the phone is in Red State, it is corrupted and cannot be trusted, it gave me a link that doesnt solve my problem. The question is, is this the end? do I still have hope? or should I give up and let it die?