How to flash s222/s223 nougat OTA zip (which is nougat firmware) using TWRP recovery in lenovo k6 / k6 power karate k33xx device:
1. open OTA zip file in X-plore file manager..
2. Go to folder meta-inf/com/google/Android where updater-script has been located
3. Open updater-script as a txt(text) file in X-plore file manager & delete first & second line. (Stop when word ui-print come)
4. Go to menu, save it.. it will take several seconds/minutes to get saved changes.
5. Go to TWRP recovery & flash.
6. Enjoy stock nougat 7.0 for Lenovo k6 power.
s222 OTA: https://www.androidfilehost.com/?fid=745425885120738879
s223 OTA: http://phonedl.ota.lenovomm.com/dls/v6/K33_S156_170220_ROW_TO_K33_S223_170610_ROW_WC460DDB76.zip
These lines should be deleted in updater-script:
Help
Hi,
After this flashing how can I remove twrp,or how can I update ota via twrp, because they showing a ota update but can't update,,,help me
Salimqas said:
Hi,
After this flashing how can I remove twrp,or how can I update ota via twrp, because they showing a ota update but can't update,,,help me
Click to expand...
Click to collapse
Same way, delete assert line in updater-script in s227 OTA update then flash using TWRP.
Salimqas said:
Hi,
After this flashing how can I remove twrp,or how can I update ota via twrp, because they showing a ota update but can't update,,,help me
Click to expand...
Click to collapse
Me too. Doesn't work here
Hi.
Does it works on K33B36 (karate) brazillian version?
dr.bathman said:
How to flash s222/s223 nougat OTA zip (which is nougat firmware)
which one of these support for 4 gb varient
Click to expand...
Click to collapse
shahzadansari said:
dr.bathman said:
How to flash s222/s223 nougat OTA zip (which is nougat firmware)
which one of these support for 4 gb varient
Click to expand...
Click to collapse
Same for all variants either 3gb or 4gb or even non power 2g variant. Same file for all.
Click to expand...
Click to collapse
unknown issue
I successfully flashed s223 version. After flashing, it automatically removed TWRP and flashed the stock recovery. After flashing s223, I got an OTA update of s229 of 76mb. I downloaded the update and tried to install it through the Stock recovery, but it shows update not installed, it simply fails. But when I turn ON the phone it shows that System update is successfully updated on the Notification panel. It shows, it fails while updating through the Stock recovery but it shows that it was successfully updated on the Notification panel. What is the issue?? Please tell me.
ota update from s223 to s229 is not successful.
Thank you friend.
The initial update from 6.0.1 to 7.0 (s223) is successful using this method. But then, update from s223 to s229 is not successful when i tried the same way. I mean, i just opened the updater-script and then removed the lines as mentioned. But it didn't work out and i am getting the attached error (Error 7). Also my recovery is still on twrp after flashing the s223. I am not sure if there is any other way to get the OTAs installed without errors. Please help.
Related
https://community.gethuawei.com/#
"This week Huawei is rolling out a new build B320 to Mate2 testers. The update was already to provided to small group of our "UUF" testers, and we were told that it would be delivered by OTA to devices that had previously installed the first public build B309. Yesterday I told testers that the OTA update would arrive by today, but that does not appear to have happened yet. If you are still on B309 and you would like to download B320, please send me a private message with your gmail and I will share it with you."
Sent from my MT2L03 using XDA Free mobile app
Just received the B20 OTA update on my HAM. I am not a beta tester. Haven't even tested it out yet. Still upgrading as we speak.
Error installing B320 with TWRP-L
gettting:
assert failed: apply_patch_check("/system/bin/appp_process32"...)
and
E:unknown command [update_log]
E:Error executing updater binary in zip '/data/media/0/HwOUC/update_sign.zip'
E: Error installing zip file '/data/media/0/HwOUC/update_sign.zip'
Any way around this?
When I tried to download and install it, it verified the download and when it rebooted it rebooted into TWRP but when I told it to reboot the system from the menu It was still B309 and not B320.trying to download it again now. If this doesn't work I may just have to get the update files and install it that way.
robertbarber said:
When I tried to download and install it, it verified the download and when it rebooted it rebooted into TWRP but when I told it to reboot the system from the menu It was still B309 and not B320.trying to download it again now. If this doesn't work I may just have to get the update files and install it that way.
Click to expand...
Click to collapse
Flash stock recovery...
Fixed
I reinstalled B309 from SD and was able to download and install B320.
B320 Install failed
Moody66 said:
Flash stock recovery...
Click to expand...
Click to collapse
tried that and it got to about 27% and said install failed so I will probably just flash the files when I can get them.
robertbarber said:
tried that and it got to about 27% and said install failed so I will probably just flash the files when I can get them.
Click to expand...
Click to collapse
Rerun B309 then update. Harris said that worked for him.
B320 update success
Moody66 said:
Rerun B309 then update. Harris said that worked for him.
Click to expand...
Click to collapse
Was able to get it installed, had to use the cleanup option in SuperSU to remove root then it worked. In the process of resetting up my root apps now. Does anybody know if this update fixes the Stagefright exploit that was recently discovered it wasn't in the update log .
I have two questions:
1. I checked for OTA updates, but I got "No Updates". Can we download the update manually.
2. I have TWRP installed. Does anyone have stock recovery for Lollipop because I didn't backup mine.
medwatt said:
I have two questions:
1. I checked for OTA updates, but I got "No Updates". Can we download the update manually.
2. I have TWRP installed. Does anyone have stock recovery for Lollipop because I didn't backup mine.
Click to expand...
Click to collapse
I have TWRP installed and the OTA update installed fine. I didn't need to flash stock recovery
TheIgster said:
I have TWRP installed and the OTA update installed fine. I didn't need to flash stock recovery
Click to expand...
Click to collapse
Surprisingly, I checked for OTA update just now and bam! I'm downloading it. I basically haven't uninstalled any system app. However, I have root access. Did you have to uninstall root ?
I had to for it to finish install. Also had to flash stock recovery. Used the cleanup option in SuperSU and then did the install.
What does 320 fix? Still not sure if I want to update from JB yet because I want my Xposed modules!
medwatt said:
Surprisingly, I checked for OTA update just now and bam! I'm downloading it. I basically haven't uninstalled any system app. However, I have root access. Did you have to uninstall root ?
Click to expand...
Click to collapse
Never had root. Just TWRP recovery so I could get my Wind version HAM to a OEM version.
TheIgster said:
Never had root. Just TWRP recovery so I could get my Wind version HAM to a OEM version.
Click to expand...
Click to collapse
Yes, but by updating to Lollipop you effectively had the stock recovery; not TWRP. Did you install TWRP after you upgraded to Lollipop ?
medwatt said:
Yes, but by updating to Lollipop you effectively had the stock recovery; not TWRP. Did you install TWRP after you upgraded to Lollipop ?
Click to expand...
Click to collapse
Oh, damn, forgot about that. Good point. No, I did not, so I would have stock recovery. Never thought about the update after the fact to LP. My bad.
So, the question now is, how can I get Lollipop stock recovery back ? I didn't back it up when I installed TWRP because I presumed I'll just download it when I need it and flash it over TWRP as I did with JB. Anyone ?
Could you downgrade to JB and then upgrade to LP again? Wouldn't that ensure you get stock recovery back?
I'm not going to even try that. Can you imagine how long that'll take ?
A reddit user captured his link to the DP
Here is the link
https://android.googleapis.com/pack.../f9cb176ee75399a48e927d9f1bd6aeb6a643272c.zip
Credit: https://m.reddit.com/r/Nexus6P/comments/5edfam/captured_my_ota_url/?compact=true
Flash guide: *should* work
1. Boot twrp on DP1
2. flash SU of choice
3. reboot
4. install FlashFire from play store
5. Select "Flash firmware package"
6. Select the zip
7. Flash it!
**** A FEW DISCLAIMERS
**** TWRP seems to be based on 6.0.1 and the OTA can only be flashed on 7.1.1
**** In this case twrp will NOT flash this OTA file
**** FlashFire IS REQUIRED
**** I am not google. Yes I am sorry that force encrypt wiped your data or you got stuck in
**** a boot loop because you flashed it incorrectly BUT I am NOT google, I am NOT even
**** the person who captured the link for the ota ALL I DID WAS SHARE IT
**** If your data partition got wiped, you got stuck in a boot loop, or the guide didn't work
**** chances are you did something wrong
**** if you would like support but Google up in the DMs
**** I am happy to help just know I won't troubleshoot what you screwed up
Would we get a full OTA as well?
gqukyo said:
Would we get a full OTA as well?
Click to expand...
Click to collapse
If by full OTA you mean full ROM zip, here it is.
WelcomeToTheSkye said:
A reddit user captured his link to the DP
Here is the link
https://android.googleapis.com/pack.../f9cb176ee75399a48e927d9f1bd6aeb6a643272c.zip
Credit: https://m.reddit.com/r/Nexus6P/comments/5edfam/captured_my_ota_url/?compact=true
Click to expand...
Click to collapse
Sorry for being a noob but do I flash the zip file through TWRP or is there some other way? I am rooted with custom recovery on DP1.
Thanks
marmeak7 said:
Sorry for being a noob but do I flash the zip file through TWRP or is there some other way? I am rooted with custom recovery on DP1.
Thanks
Click to expand...
Click to collapse
If you're rooted, use flash fire from play. It restores twrp and root after updating. Haven't used any other method. No problems. Best app ever.
Just updated. Sound louder, November security patch and overall smoother scrolling.
No regrets getting the 6P. Amazing phone.?
It work fined at my Nexus 6p. All the rooted apps working fine. Thank you very much for your sharing. Appreciated it.
Just curius, has anyone of you guys unencrypted?
I installed it with flashfire but I'm still at DP1... Am I doing something wrong?
I installed it as flash zip or ota but nothing still got the message to update.
Is it because I have installed custom kernel?
Can't flash it in TWRP --> error
edit: I got E3001: the build fingerprint doesn't match. How can I fix this?
I succesfully flashed using Flashfire.
First thing I noticed is the many (repeating) superuser notifications I get for apps getting root during boot.
DRD70 said:
I installed it with flashfire but I'm still at DP1... Am I doing something wrong?
I installed it as flash zip or ota but nothing still got the message to update.
Is it because I have installed custom kernel?
Click to expand...
Click to collapse
the same for me... I only have twrp and have modified system... maybe is because of that... but I tought that would not be a problem... guess I'm going the twrp way
hmm, now I get it... this is not a full ota file.
Will I be able to flash it via TWRP like I did with the full OTA file from DP1 ??
^You need the full ota not this type of ota...
So this is the update from DP1 to DP2, correct? Is there any other way to install it besides with Flashfire? I've always installed from my PC, so is there any way to sideload it or install the zip through TWRP?
DRD70 said:
I installed it with flashfire but I'm still at DP1... Am I doing something wrong?
I installed it as flash zip or ota but nothing still got the message to update.
Is it because I have installed custom kernel?
Click to expand...
Click to collapse
You must be on dp1 and select flash firmware package not flash zip
ahmd gomaa said:
You must be on dp1 and select flash firmware package not flash zip
Click to expand...
Click to collapse
I was on dp1 and my first selection was firmware package and nothing happened. So i tried the other with the same outcome.
I finally revert it to stock and got ota update the dp2 since I'm a beta tester and root it again.
Rooted with TWRP on NPF10C
So I'm rooted and have TWRP installed, how can I update to DP2 ?
aakash dabrase said:
So I'm rooted and have TWRP installed, how can I update to DP2 ?
Click to expand...
Click to collapse
Install FlashFire from the play store and select firmware
swa100 said:
Can't flash it in TWRP --> error
edit: I got E3001: the build fingerprint doesn't match. How can I fix this?
Click to expand...
Click to collapse
Noted it in the op
Twrp is based on 6.0.1 afaik just use FlashFire
WelcomeToTheSkye said:
Install FlashFire from the play store and select firmware
Click to expand...
Click to collapse
Here's what I did:
1. Downloaded the OTA (137 MB) on pc.
2. Copied it to phone.
3. Selected Flash OTA in flashfire and selected the zip.
4. Flashfire failed to do it.
Should I use flash firmware option instead of flash OTA?
Also there are further options to select like recovery etc. What about them?
aakash dabrase said:
Here's what I did:
1. Downloaded the OTA (137 MB) on pc.
2. Copied it to phone.
3. Selected Flash OTA in flashfire and selected the zip.
4. Flashfire failed to do it.
Should I use flash firmware option instead of flash OTA?
Also there are further options to select like recovery etc. What about them?
Click to expand...
Click to collapse
Yep select firmware (it says that in op) select what you would like to keep
This is a guide how to flash s227/s229 OTA over s223 stock build in Lenovo k6 / k6 power karate k33 device.
Here you need to edit updater script in ota zip file..
How to edit updater-script?
1. Go to x-plore file manager
2. Click on s227/s229 ota zip file. File will be opened
3. Go to meta-info/com/google/android/updater-script
4. Open updater-script ad txt file
5. Delete first line (stop deleting from ui_print):
This line
getprop("ro.product.device") == "K33" || abort("E3004: This package is for "K33" devices; this is a "" + getprop("ro.product.device") + "".");
6. Save it.
7. Go to twrp & flash file
(Remember, it will get flashed on s223 stock (non modified, never rooted before) rom only)
s227 ota:
http://phonedl.ota.lenovomm.com/dls/v6/K33_S223_170610_ROW_TO_K33_S227_170801_ROW_WC7DF9F0EA.zip
s223 ota
http://phonedl.ota.lenovomm.com/dls/v6/K33_S156_170220_ROW_TO_K33_S223_170610_ROW_WC460DDB76.zip
s229 ota (s223 to s229.. can't be flashed over s227)
http://phonedl.ota.lenovomm.com/dls/v6/K33_S223_170610_ROW_TO_K33_S229_170908_ROW_WCB6AAE2AD.zip
X-PLORE file manager
https://play.google.com/store/apps/details?id=com.lonelycatgames.Xplore
Note: if you have any issues flash s223 ota first from twrp (after editing updater-script of s223 the way described above) then flash s227
Doesnt work on k33b36 normal with lenovo recovery update.zip
Provide a normal k33 without karate version
kaiqueknup said:
Provide a normal k33 without karate version
Click to expand...
Click to collapse
What does that mean?
dr.bathman said:
What does that mean?
Click to expand...
Click to collapse
My model is the normal k6 (k33b36), not the power/karate version and it did not work. When I flash with twrp it appears as error
kaiqueknup said:
My model is the normal k6 (k33b36), not the power/karate version and it did not work. When I flash with twrp it appears as error
Click to expand...
Click to collapse
It's OTA, you need to efit updater-script before flashing from TWRP. And for all variants of k6 device, OTA file is same.
For further guild kindly join our telegram group. Thanks.
dr.bathman said:
It's OTA, you need to efit updater-script before flashing from TWRP. And for all variants of k6 device, OTA file is same.
For further guild kindly join our telegram group. Thanks.
Click to expand...
Click to collapse
I edited and deleted the first 2 lines as you taught. I don't know why it did not work.
kaiqueknup said:
I edited and deleted the first 2 lines as you taught. I don't know why it did not work.
Click to expand...
Click to collapse
You must be on unmodified (non rooted) stock s223 if trying to flash s227.
Or you must do clean flash if trying to flash s223.
s229 ota (s223 to s229.. can't be flashed over s227)
http://phonedl.ota.lenovomm.com/dls/v6/K33_S223_170610_ROW_TO_K33_S229_170908_ROW_WCB6AAE2AD.zip
New stock update!
Will s227 get a s229 update?
lpganesh said:
Will s227 get a s229 update?
Click to expand...
Click to collapse
No
Any significant difference between s227 and s229?
lpganesh said:
Any significant difference between s227 and s229?
Click to expand...
Click to collapse
No
How to install stock rom over ressurection remix?
Can I flash through custom rom?
I had successfully installed s223 version on my k6 power, and I also updated it to s229 version with the stock recovery. Will I get the warranty back?? Please reply.
Not able to unbrick my device, stuck in bootlooder
I during flashing customer ROM thro' fastboot mode . i have ended up with problem with my device. i am not able to unbrick the handset. Pls gid. I have tried multiple methods to unbrick:crying: it.
:crying:
now i'm in s227 and i get s231 update but it not installing is stock recovery and also trying with twrp too
any help
why would someone have twrp on his device without root ?
i have K53 karatep .. Official S224 rom .. secureboot = 0 .. not encrypted .. i mean i modified the boot.img before flashing .. i have twrp and magisk installed .. i tried to install the ota zip update file .. i changed the script lines .. i tried a lot of things .. they all failed haha The only way is to have a full S229 rom so i can edit the boot.img file again and flash it back on my device and sincerely between S218 and S224 there are a lot of bug fixes .. i suppose the S229 have also more bug fixes ..
i didnt like the lineageos rom or any other custom roms for the karatep honestly ..
Is there any way to install latest complete Stock ROM using TWRP? (not small updates)
Because I'm on Custom ROM, I want to use stock ROM again.
Need help.
Also new update also available.
K33_S231_171114_ROW_QPST
https://cloud.mail.ru/public/798u/qYHFDbNrT
http://lenovo-forums.ru/files/file/1906-proshivka-lenovo-k6-k33k33power-k33_s231_171114_row_qpst/
Hi guys,
Probably been discussed before, but I couldn't find all the answers I need.
I have honor 9 STF-L09, version STF-L09C432B100.
The phone bootloader is unlocked, rooted and have TWRP recovery.
Sorry for the muiltiple questions.....
I want to update it to the latest stock ROM (I have no problem wiping the memory).
I thought about using HuRUpdater tool, is that the best method?
I couldn't find a 'Global' ROM version, which should I choose?
Will I have to do incremental update with this tool?
Do I must change the recovery to this one? is there a better version? Do I need the capacitive touch fix (I didn't have any problem with capacitive touch).
Any help is appreciated.
Thank you
They 're no public nougat proper recovery working with HuRUpdater. The one you linked is for oreo.
So i guess you'll have to :
- flash back STF-L09C432B100 stock recovery
- then update tje normal way to oreo via OTA
- if not getting OTA, you could force it with android apps 'Firmware Finder' to update to STF-L09C432B183. Then you should finally got the normal OTA update to STF-L09C432B364.
This process should not mess with your flashlight or caoacitives buttons.
oslo83 said:
They 're no public nougat proper recovery working with HuRUpdater. The one you linked is for oreo.
So i guess you'll have to :
- flash back STF-L09C432B100 stock recovery
- then update tje normal way to oreo via OTA .
.
Click to expand...
Click to collapse
I am already on B100 and its recovery.
Since I'm rotted with TWRP I can't get OTAs (I do but it doesn't work)
What is "tje"?
oslo83 said:
- if not getting OTA, you could force it with android apps 'Firmware Finder' to update to STF-L09C432B183. Then you should finally got the normal OTA update to STF-L09C432B364.
.
Click to expand...
Click to collapse
Can you please elaborate, I have no idea what you're talking about and how do I force OTA?
Thanks
I think "tje" is just "the" . I think you have to start with clean device : stock rom ( in this case stock recovery too : flash back STF-L09C432B100 stock recovery ) and update with Firmware Finder, to 183 first, 364 after.
ADD : for me, just my way, don't hurt me if I'm wrong : ) I open FF, select correct rom , hit button " get an update trough dns " " auto", go to parametre / update , system find the update, go back to FF, close it, update still DL, sometimes , when finish , update can't start, so I reboot my device, return to parametre / update and it's ok.
Clonimus said:
I am already on B100 and its recovery.
Since I'm rotted with TWRP I can't get OTAs (I do but it doesn't work)
Click to expand...
Click to collapse
twrp is a custom recovery and you need to have a stock recovery for OTA update to work.
So : 'flash back STF-L09C432B100 STOCK recovery'
You could get it by using windows app 'Huawei Update Extractor' on the file 'Update.app' included inside the firmware file 'update.zip' 's STF-L09C432B100.
Don't mind your root access: you'll loose it during the update.
Clonimus said:
What is "tje"?
Click to expand...
Click to collapse
just a typo in place of 'the' ; like your 'rotted' in place of 'rooted'
Clonimus said:
Can you please elaborate, I have no idea what you're talking about and how do I force OTA?
Thanks
Click to expand...
Click to collapse
Because you state that you're getting the OTA notifications : You won't have to FORCE them. So don't bother.
oslo83 said:
twrp is a custom recovery and you need to have a stock recovery for OTA update to work.
So : 'flash back STF-L09C432B100 STOCK recovery'
You could get it by using windows app 'Huawei Update Extractor' on the file 'Update.app' included inside the firmware file 'update.zip' 's STF-L09C432B100.
Don't mind your root access: you'll loose it during the update.
just a typo in place of 'the' ; like your 'rotted' in place of 'rooted'
Because you state that you're getting the OTA notifications : You won't have to FORCE them. So don't bother.
Click to expand...
Click to collapse
So you're saying I need to extract the stock recovery and flash it using fastboot. /then I will update normaly via OT to the latest version.
Then I need to re-root and reinstall the custom recovery.
Did I understand you correctly?
Where can I find the STF-L09C432B100 firmware?
Many thanks
Yes.
Yes.
Yes. https://yadi.sk/d/Y2yuM--73Lb9Kk/update.zip
It's C432B120 but its stock recovery is the same as B100.
Thank you all.
I flashed the stock recovery and managed to OTA update all the way to the most recent version.
Now I need to find which custom recovery is appropriate for new version
@Clonimus :
https://forum.xda-developers.com/showpost.php?p=75680308
oslo83 said:
@Clonimus :
https://forum.xda-developers.com/showpost.php?p=75680308
Click to expand...
Click to collapse
Thanks. I did that, it works
I already asked in the post you linked. bit do you knwo what's the difference between "fastboot flash recovery" and "fastboot flash recovery_ramdisk"?
I did as instructed in the OP ("fastboot flash recovery_ramdisk"), but I can't load TWRP from power off using power button + down button.
TWRP does load when using "adb reboot recovery_ramdisk". Is that the reason?
Clonimus said:
but I can't load TWRP from power off using power button + down button.
Click to expand...
Click to collapse
wrong keys combo for recovery mode on huawei/honor phones :
From power off, using power button + up button will give you recovery mode.
oslo83 said:
wrong keys combo for recovery mode on huawei/honor phones :
From power off, using power button + up button will give you recovery mode.
Click to expand...
Click to collapse
LOL, my bad. Thanks
Hey everyone,
last month I unlocked and rooted my phone, then used this tool to put on the newest firmware (at the time 366). Now, I'd like to update to the newest firmware (368). Is there anything special I need to do or can I just dirty flash it per see? Do I use the FullOTA-MF files or the OTA-MF files?
Thanks in advance for your help.
If you've flashed a non-stock recovery like TWRP*, you can not use the OTA update feature. You need to flash the full ROM via TWRP.
* TWRP is now officially supported, make sure you flash that version if you're using an older, unofficial TWRP.
1. Obtain the ROM you want to install. Make sure the download is from miui.com if you want stock
Official site -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab. The website does not update links immediately after a ROM update is released, so you may have to do a bit of digging if you want a very recent update.
You can also check ROM links on third party sites like ezbox.idv.tw, again, make sure the actual download links are from miui.com and not somewhere else.
Latest EEA ROM(Android 10) as of 2020-10-24 -
V12.0.3.0.QFJEUXM
Nightly official LineageOS builds
2. Get into TWRP
Either run 'adb reboot recovery'
Or power phone off and boot into TWRP by holding PWR+VOL_UP during boot
3. Upload the ROM to the phone
Code:
adb push ~/Downloads/[B]miui_DAVINCIEEAGlobal_V12.0.3.0.QFJEUXM_12b99693bc_10.0.zip[/B] /sdcard/
4. Flash the ROM via TWRP
5. Flash Magisk if you use it, because flashing the ROM deletes it.
6. Remove the update file:
Code:
adb shell rm /sdcard/[B]miui_DAVINCIEEAGlobal_V12.0.3.0.QFJEUXM_12b99693bc_10.0.zip[/B]
That's it! Reboot your phone into your new ROM!
Also check out my debloat list and my detailed phone settings.
Additional note - formatting /system will brick your phone and you'll have to recover using a fastboot ROM.
Please can I get the 10.3.15 ota zip for the official recovery I cant get the update and my phone is now on 10.3.12 it always say no update available even though I have done the update before and returned to 10.3.12 but it does show it to me again and also my otg doesn't work . please help me
Benfatica said:
Please can I get the 10.3.15 ota zip for the official recovery I cant get the update and my phone is now on 10.3.12 it always say no update available even though I have done the update before and returned to 10.3.12 but it does show it to me again and also my otg doesn't work . please help me
Click to expand...
Click to collapse
OTA zip is here => https://bigota.d.miui.com/V10.3.15....PFJEUXM-V10.3.15.0.PFJEUXM-14bc6a5788-9.0.zip
Micdu70 said:
OTA zip is here => https://bigota.d.miui.com/V10.3.15....PFJEUXM-V10.3.15.0.PFJEUXM-14bc6a5788-9.0.zip
Click to expand...
Click to collapse
Thanks,I was able to get it over ota but it doesn't come now has xiaomi removed it or something
I also get this message if I try to download the latest package. Is something wrong with my phone
It looks like the 10.3.15.0 update was pulled and 10.3.12.0 is now latest.
C0rn3j said:
It looks like the 10.3.15.0 update was pulled and 10.3.12.0 is now latest.
Click to expand...
Click to collapse
Ok thanks, but why though ??
My last update is 10.3.11.0 July security patch
C0rn3j said:
If you've flashed a non-stock recovery like TWRP, you can not use the OTA update feature. You need to flash the full ROM via TWRP.
So how to get around this when the updater is telling you there is an incremental update?
Simple, we tell the updater to download the full image instead, move the update from the original folder so MIUI won't attempt to upgrade from it on next reboot, boot into TWRP and flash the image there.
1. Settings -> About Phone -> System update -> three dots -> Download latest package
2. Get filename of the update:
3. You now have the filename of the update. I got miui_DAVINCIEEAGlobal_V10.3.15.0.PFJEUXM_b6738621e2_9.0.zip and will be using this name throughout the rest of this how-to, replace the examples accordingly based on what name you got.
4. (optional) Backup the latest ROM file to your PC:
5. Prevent MIUI from seeing the update file and trying to update from it on accident by moving the file a folder higher:
6. Power phone off
7. Boot into TWRP by holding PWR+VOL_UP during boot
8. Flash the ROM via TWRP
9. Flash Magisk if you use it, flashing the ROM deletes it.
10. Boot back into Android and remove the update file:
That's it!
You can also download the full ROM directly through miui.com, but keep in mind the website does not instantly update the link there after a ROM update is released.
https://en.miui.com/download-361.html#619 -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab.
Page best viewed in Firefox, clicking on the lock icon -> Arrow icon in the security tab -> Disable protection, since Xiaomi can't even set their website up properly.
In my case the ROM download through phone was corrupted and I had to edit the site URL from the filename I got to get a proper update file:
Click to expand...
Click to collapse
Redmi K20 Open Beta File Link?
Wrong thread.
Don't quote the OP, it clutters the thread.
For people who want the 10.3.15.0 update. I uploaded it to mega. Link is here:
https://mega.nz/#!pddQUaBL!s5En8LWaxWciUyNowU8_rYYMk2D48Dj8J7_PbJwv0kc
C0rn3j said:
...
https://en.miui.com/download-361.html#619 -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab.
Page best viewed in Firefox, clicking on the lock icon -> Arrow icon in the security tab -> Disable protection, since Xiaomi can't even set their website up properly.
...
Click to expand...
Click to collapse
The most accurate, updated and actual site for Mi 9t/K20 (davinci) firmware/rom - https://mirom.ezbox.idv.tw/en/phone/davinci/
10.3.15 ota is back online, just received it
Hey @C0rn3j
I am on stock 10.3.12.0 PFJEUXM and TWRP 4PDA 3.3.1.-2 fix and Magisk.
My questions:
1. Is it worth the upgrade to MIUI 11 as it is still Android 9
2. If I flash it through TWRP, did you loose any dual app settings? (as I lost dual apps while backing up the phone with TWRP and Titanium backup)
3. as you said I have to flash the Magisk again, did you choose the latest or the same as was installed on the phone before the upgrade?
Thanks in advance for reply
rastip said:
Hey @C0rn3j
I am on stock 10.3.12.0 PFJEUXM and TWRP 4PDA 3.3.1.-2 fix and Magisk.
My questions:
1. Is it worth the upgrade to MIUI 11 as it is still Android 9
2. If I flash it through TWRP, did you loose any dual app settings? (as I lost dual apps while backing up the phone with TWRP and Titanium backup)
3. as you said I have to flash the Magisk again, did you choose the latest or the same as was installed on the phone before the upgrade?
Thanks in advance for reply
Click to expand...
Click to collapse
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
C0rn3j said:
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
Click to expand...
Click to collapse
I have Nova Launcher, do you use default or as well external one?
Do you think Nova will stay untouched with this upgrade?
rastip said:
I have Nova Launcher, do you use default or as well external one?
Do you think Nova will stay untouched with this upgrade?
Click to expand...
Click to collapse
Nothing will happen to it
If the Magisk have to be flashed again, does it mean all the hide settings which were there before has to be set again or stay there from the old version? I have few apps in Magisk hide root, so just wondering how this will be affected with rom update
A second question:
I am on 10.3.12.0 not upgraded yet to 10.3.15.0.
Can I upgrade straight to V11.0.2.0 or first to 10.3.15.0 and then to V11?
---------- Post added at 05:27 PM ---------- Previous post was at 05:09 PM ----------
C0rn3j said:
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
Click to expand...
Click to collapse
While flashing did you untick Recovery in the TWRP as I believe the whole 2,2GB ZIP has recovery image and could be flashed and overwrite the TWRP?
Your guide not working, twrp failed to install the update "file corrupted".
I've downloaded the OTA package from "http://c.mi.com//miuidownload/detail?device=1700361" and twrp very happy to install this file, my Mi_9T at the latest update 11.
Unfortunately the archive downloaded through the Updater cannot be flashed as is through TWRP (message: file corrupted)
miui_RAPHAELEEAGlobal_V11.0.3.0.QFKEUXM_153f9511ae_10.0.zip