If you've flashed a non-stock recovery like TWRP*, you can not use the OTA update feature. You need to flash the full ROM via TWRP.
* TWRP is now officially supported, make sure you flash that version if you're using an older, unofficial TWRP.
1. Obtain the ROM you want to install. Make sure the download is from miui.com if you want stock
Official site -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab. The website does not update links immediately after a ROM update is released, so you may have to do a bit of digging if you want a very recent update.
You can also check ROM links on third party sites like ezbox.idv.tw, again, make sure the actual download links are from miui.com and not somewhere else.
Latest EEA ROM(Android 10) as of 2020-10-24 -
V12.0.3.0.QFJEUXM
Nightly official LineageOS builds
2. Get into TWRP
Either run 'adb reboot recovery'
Or power phone off and boot into TWRP by holding PWR+VOL_UP during boot
3. Upload the ROM to the phone
Code:
adb push ~/Downloads/[B]miui_DAVINCIEEAGlobal_V12.0.3.0.QFJEUXM_12b99693bc_10.0.zip[/B] /sdcard/
4. Flash the ROM via TWRP
5. Flash Magisk if you use it, because flashing the ROM deletes it.
6. Remove the update file:
Code:
adb shell rm /sdcard/[B]miui_DAVINCIEEAGlobal_V12.0.3.0.QFJEUXM_12b99693bc_10.0.zip[/B]
That's it! Reboot your phone into your new ROM!
Also check out my debloat list and my detailed phone settings.
Additional note - formatting /system will brick your phone and you'll have to recover using a fastboot ROM.
Please can I get the 10.3.15 ota zip for the official recovery I cant get the update and my phone is now on 10.3.12 it always say no update available even though I have done the update before and returned to 10.3.12 but it does show it to me again and also my otg doesn't work . please help me
Benfatica said:
Please can I get the 10.3.15 ota zip for the official recovery I cant get the update and my phone is now on 10.3.12 it always say no update available even though I have done the update before and returned to 10.3.12 but it does show it to me again and also my otg doesn't work . please help me
Click to expand...
Click to collapse
OTA zip is here => https://bigota.d.miui.com/V10.3.15....PFJEUXM-V10.3.15.0.PFJEUXM-14bc6a5788-9.0.zip
Micdu70 said:
OTA zip is here => https://bigota.d.miui.com/V10.3.15....PFJEUXM-V10.3.15.0.PFJEUXM-14bc6a5788-9.0.zip
Click to expand...
Click to collapse
Thanks,I was able to get it over ota but it doesn't come now has xiaomi removed it or something
I also get this message if I try to download the latest package. Is something wrong with my phone
It looks like the 10.3.15.0 update was pulled and 10.3.12.0 is now latest.
C0rn3j said:
It looks like the 10.3.15.0 update was pulled and 10.3.12.0 is now latest.
Click to expand...
Click to collapse
Ok thanks, but why though ??
My last update is 10.3.11.0 July security patch
C0rn3j said:
If you've flashed a non-stock recovery like TWRP, you can not use the OTA update feature. You need to flash the full ROM via TWRP.
So how to get around this when the updater is telling you there is an incremental update?
Simple, we tell the updater to download the full image instead, move the update from the original folder so MIUI won't attempt to upgrade from it on next reboot, boot into TWRP and flash the image there.
1. Settings -> About Phone -> System update -> three dots -> Download latest package
2. Get filename of the update:
3. You now have the filename of the update. I got miui_DAVINCIEEAGlobal_V10.3.15.0.PFJEUXM_b6738621e2_9.0.zip and will be using this name throughout the rest of this how-to, replace the examples accordingly based on what name you got.
4. (optional) Backup the latest ROM file to your PC:
5. Prevent MIUI from seeing the update file and trying to update from it on accident by moving the file a folder higher:
6. Power phone off
7. Boot into TWRP by holding PWR+VOL_UP during boot
8. Flash the ROM via TWRP
9. Flash Magisk if you use it, flashing the ROM deletes it.
10. Boot back into Android and remove the update file:
That's it!
You can also download the full ROM directly through miui.com, but keep in mind the website does not instantly update the link there after a ROM update is released.
https://en.miui.com/download-361.html#619 -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab.
Page best viewed in Firefox, clicking on the lock icon -> Arrow icon in the security tab -> Disable protection, since Xiaomi can't even set their website up properly.
In my case the ROM download through phone was corrupted and I had to edit the site URL from the filename I got to get a proper update file:
Click to expand...
Click to collapse
Redmi K20 Open Beta File Link?
Wrong thread.
Don't quote the OP, it clutters the thread.
For people who want the 10.3.15.0 update. I uploaded it to mega. Link is here:
https://mega.nz/#!pddQUaBL!s5En8LWaxWciUyNowU8_rYYMk2D48Dj8J7_PbJwv0kc
C0rn3j said:
...
https://en.miui.com/download-361.html#619 -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab.
Page best viewed in Firefox, clicking on the lock icon -> Arrow icon in the security tab -> Disable protection, since Xiaomi can't even set their website up properly.
...
Click to expand...
Click to collapse
The most accurate, updated and actual site for Mi 9t/K20 (davinci) firmware/rom - https://mirom.ezbox.idv.tw/en/phone/davinci/
10.3.15 ota is back online, just received it
Hey @C0rn3j
I am on stock 10.3.12.0 PFJEUXM and TWRP 4PDA 3.3.1.-2 fix and Magisk.
My questions:
1. Is it worth the upgrade to MIUI 11 as it is still Android 9
2. If I flash it through TWRP, did you loose any dual app settings? (as I lost dual apps while backing up the phone with TWRP and Titanium backup)
3. as you said I have to flash the Magisk again, did you choose the latest or the same as was installed on the phone before the upgrade?
Thanks in advance for reply
rastip said:
Hey @C0rn3j
I am on stock 10.3.12.0 PFJEUXM and TWRP 4PDA 3.3.1.-2 fix and Magisk.
My questions:
1. Is it worth the upgrade to MIUI 11 as it is still Android 9
2. If I flash it through TWRP, did you loose any dual app settings? (as I lost dual apps while backing up the phone with TWRP and Titanium backup)
3. as you said I have to flash the Magisk again, did you choose the latest or the same as was installed on the phone before the upgrade?
Thanks in advance for reply
Click to expand...
Click to collapse
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
C0rn3j said:
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
Click to expand...
Click to collapse
I have Nova Launcher, do you use default or as well external one?
Do you think Nova will stay untouched with this upgrade?
rastip said:
I have Nova Launcher, do you use default or as well external one?
Do you think Nova will stay untouched with this upgrade?
Click to expand...
Click to collapse
Nothing will happen to it
If the Magisk have to be flashed again, does it mean all the hide settings which were there before has to be set again or stay there from the old version? I have few apps in Magisk hide root, so just wondering how this will be affected with rom update
A second question:
I am on 10.3.12.0 not upgraded yet to 10.3.15.0.
Can I upgrade straight to V11.0.2.0 or first to 10.3.15.0 and then to V11?
---------- Post added at 05:27 PM ---------- Previous post was at 05:09 PM ----------
C0rn3j said:
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
Click to expand...
Click to collapse
While flashing did you untick Recovery in the TWRP as I believe the whole 2,2GB ZIP has recovery image and could be flashed and overwrite the TWRP?
Your guide not working, twrp failed to install the update "file corrupted".
I've downloaded the OTA package from "http://c.mi.com//miuidownload/detail?device=1700361" and twrp very happy to install this file, my Mi_9T at the latest update 11.
Unfortunately the archive downloaded through the Updater cannot be flashed as is through TWRP (message: file corrupted)
miui_RAPHAELEEAGlobal_V11.0.3.0.QFKEUXM_153f9511ae_10.0.zip
Related
A reddit user captured his link to the DP
Here is the link
https://android.googleapis.com/pack.../f9cb176ee75399a48e927d9f1bd6aeb6a643272c.zip
Credit: https://m.reddit.com/r/Nexus6P/comments/5edfam/captured_my_ota_url/?compact=true
Flash guide: *should* work
1. Boot twrp on DP1
2. flash SU of choice
3. reboot
4. install FlashFire from play store
5. Select "Flash firmware package"
6. Select the zip
7. Flash it!
**** A FEW DISCLAIMERS
**** TWRP seems to be based on 6.0.1 and the OTA can only be flashed on 7.1.1
**** In this case twrp will NOT flash this OTA file
**** FlashFire IS REQUIRED
**** I am not google. Yes I am sorry that force encrypt wiped your data or you got stuck in
**** a boot loop because you flashed it incorrectly BUT I am NOT google, I am NOT even
**** the person who captured the link for the ota ALL I DID WAS SHARE IT
**** If your data partition got wiped, you got stuck in a boot loop, or the guide didn't work
**** chances are you did something wrong
**** if you would like support but Google up in the DMs
**** I am happy to help just know I won't troubleshoot what you screwed up
Would we get a full OTA as well?
gqukyo said:
Would we get a full OTA as well?
Click to expand...
Click to collapse
If by full OTA you mean full ROM zip, here it is.
WelcomeToTheSkye said:
A reddit user captured his link to the DP
Here is the link
https://android.googleapis.com/pack.../f9cb176ee75399a48e927d9f1bd6aeb6a643272c.zip
Credit: https://m.reddit.com/r/Nexus6P/comments/5edfam/captured_my_ota_url/?compact=true
Click to expand...
Click to collapse
Sorry for being a noob but do I flash the zip file through TWRP or is there some other way? I am rooted with custom recovery on DP1.
Thanks
marmeak7 said:
Sorry for being a noob but do I flash the zip file through TWRP or is there some other way? I am rooted with custom recovery on DP1.
Thanks
Click to expand...
Click to collapse
If you're rooted, use flash fire from play. It restores twrp and root after updating. Haven't used any other method. No problems. Best app ever.
Just updated. Sound louder, November security patch and overall smoother scrolling.
No regrets getting the 6P. Amazing phone.?
It work fined at my Nexus 6p. All the rooted apps working fine. Thank you very much for your sharing. Appreciated it.
Just curius, has anyone of you guys unencrypted?
I installed it with flashfire but I'm still at DP1... Am I doing something wrong?
I installed it as flash zip or ota but nothing still got the message to update.
Is it because I have installed custom kernel?
Can't flash it in TWRP --> error
edit: I got E3001: the build fingerprint doesn't match. How can I fix this?
I succesfully flashed using Flashfire.
First thing I noticed is the many (repeating) superuser notifications I get for apps getting root during boot.
DRD70 said:
I installed it with flashfire but I'm still at DP1... Am I doing something wrong?
I installed it as flash zip or ota but nothing still got the message to update.
Is it because I have installed custom kernel?
Click to expand...
Click to collapse
the same for me... I only have twrp and have modified system... maybe is because of that... but I tought that would not be a problem... guess I'm going the twrp way
hmm, now I get it... this is not a full ota file.
Will I be able to flash it via TWRP like I did with the full OTA file from DP1 ??
^You need the full ota not this type of ota...
So this is the update from DP1 to DP2, correct? Is there any other way to install it besides with Flashfire? I've always installed from my PC, so is there any way to sideload it or install the zip through TWRP?
DRD70 said:
I installed it with flashfire but I'm still at DP1... Am I doing something wrong?
I installed it as flash zip or ota but nothing still got the message to update.
Is it because I have installed custom kernel?
Click to expand...
Click to collapse
You must be on dp1 and select flash firmware package not flash zip
ahmd gomaa said:
You must be on dp1 and select flash firmware package not flash zip
Click to expand...
Click to collapse
I was on dp1 and my first selection was firmware package and nothing happened. So i tried the other with the same outcome.
I finally revert it to stock and got ota update the dp2 since I'm a beta tester and root it again.
Rooted with TWRP on NPF10C
So I'm rooted and have TWRP installed, how can I update to DP2 ?
aakash dabrase said:
So I'm rooted and have TWRP installed, how can I update to DP2 ?
Click to expand...
Click to collapse
Install FlashFire from the play store and select firmware
swa100 said:
Can't flash it in TWRP --> error
edit: I got E3001: the build fingerprint doesn't match. How can I fix this?
Click to expand...
Click to collapse
Noted it in the op
Twrp is based on 6.0.1 afaik just use FlashFire
WelcomeToTheSkye said:
Install FlashFire from the play store and select firmware
Click to expand...
Click to collapse
Here's what I did:
1. Downloaded the OTA (137 MB) on pc.
2. Copied it to phone.
3. Selected Flash OTA in flashfire and selected the zip.
4. Flashfire failed to do it.
Should I use flash firmware option instead of flash OTA?
Also there are further options to select like recovery etc. What about them?
aakash dabrase said:
Here's what I did:
1. Downloaded the OTA (137 MB) on pc.
2. Copied it to phone.
3. Selected Flash OTA in flashfire and selected the zip.
4. Flashfire failed to do it.
Should I use flash firmware option instead of flash OTA?
Also there are further options to select like recovery etc. What about them?
Click to expand...
Click to collapse
Yep select firmware (it says that in op) select what you would like to keep
Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!
Hit Thanks if I Helped You!
Regards,
PoseidonKing
Hello,
I've installed a custom recovery, SuperSU and the xposed framework on my Wileyfox Swift 2 Plus and yesterday I've received an OTA update with wich I was (as expected) unable to update my phone. (it just rebooted to TWRP and did nothing) On their website I was only able to find an older build. I think what I have to do is install the stock recovery(to install the update then switch back to a custom one), but I don't know where to get it from.
boa05 said:
Hello,
I've installed a custom recovery, SuperSU and the xposed framework on my Wileyfox Swift 2 Plus and yesterday I've received an OTA update with wich I was (as expected) unable to update my phone. (it just rebooted to TWRP and did nothing) On their website I was only able to find an older build. I think what I have to do is install the stock recovery(to install the update then switch back to a custom one), but I don't know where to get it from.
Click to expand...
Click to collapse
Here you go. https://drive.google.com/file/d/0B1k2IwBoVgfFVVF1UEY3cUVVY28/view?usp=sharing
I grabbed this from cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87 - flash it via Fastboot preferably.
linuxct said:
Here you go. https://drive.google.com/file/d/0B1k2IwBoVgfFVVF1UEY3cUVVY28/view?usp=sharing
I grabbed this from cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87 - flash it via Fastboot preferably.
Click to expand...
Click to collapse
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
boa05 said:
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
Click to expand...
Click to collapse
You mean, a Cid face? LOL
You can revert by flashing the system.img via fastboot from the very same zip I mentioned before. You can get it here: http://builds.cyngn.com/factory/marmite/cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87.zip
boa05 said:
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
Click to expand...
Click to collapse
Exactly the same here. I flashed TWRP so I can install SuperSU for root access, now I've flashed back the stock recovery to apply the update and it ends in "Error".
It's also not possible to apply the downloaded zip-package manually (not via TWRP and not via Cyanogen recovery).
Log file says:
E: footer is wrong
E: Signatur verification failed
Installation aborted.
Click to expand...
Click to collapse
It's not an option for me to do a full reset each time they (who ever it might be in the future) release an update.
I bought this phone because I thought it might be easier to update/ get root access compared with e.g. Samsung devices, but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
zerospaced said:
Exactly the same here. I flashed TWRP so I can install SuperSU for root access, now I've flashed back the stock recovery to apply the update and it ends in "Error".
It's also not possible to apply the downloaded zip-package manually (not via TWRP and not via Cyanogen recovery).
Log file says:
It's not an option for me to do a full reset each time they (who ever it might be in the future) release an update.
I bought this phone because I thought it might be easier to update/ get root access compared with e.g. Samsung devices, but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
Click to expand...
Click to collapse
I haven't checked myself but linuxct seems to say its an img file. You need to flash img files with fastboot. Have you tried unziping the .zip file and seeing if there are img files (e.g system.img, recovery.img)
If you don't know how to use fastboot here is a good tutorial: https://forum.xda-developers.com/showthread.php?t=2277112
Hope this helps.
zerospaced said:
I flashed TWRP so I can install SuperSU for root access
Click to expand...
Click to collapse
You can enable that inside Developer options > Root access. There's no need to either alter your system nor unlock your bootloader if your only concern is root privileges.
zerospaced said:
... but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
Click to expand...
Click to collapse
Cyanogen is no more, Wileyfox's switching to an AOSP-based ROM through the following OTAs, which will be Android 7.0 Nougat and will start rolling on february. You've more info here: https://forum.xda-developers.com/swift-2/how-to/official-wileyfox-statement-regarding-t3528844
linuxct said:
You can enable that inside Developer options > Root access. There's no need to either alter your system nor unlock your bootloader if your only concern is root privileges.
Click to expand...
Click to collapse
No, I think that is only there in CyanogenMod (the community based custom rom) not in the Cyanogen OS (the proprietary OS for businesses). As far as I know no OEM can release an android phone with Gapps and root. We have an option there called "OEM unlock" which will allow you to unlock your bootloader (from a computer) but nothing else that would grant root out of box.
zerospaced said:
Exactly the same here. I flashed TWRP so I can install SuperSU for root access, now I've flashed back the stock recovery to apply the update and it ends in "Error".
It's also not possible to apply the downloaded zip-package manually (not via TWRP and not via Cyanogen recovery).
Log file says:
It's not an option for me to do a full reset each time they (who ever it might be in the future) release an update.
I bought this phone because I thought it might be easier to update/ get root access compared with e.g. Samsung devices, but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
Click to expand...
Click to collapse
Just flashing back to the stock recovery does not remove SuperSU. Due to your error I'm assuming you have a non-systemless root. In order to remove SuperSU you must flash http://downloadmirror.co/Uot/UPDATE-unSU.zip (with TWRP), and if that doesn't work I would recommend flashing back to full stock cyngn from: https://cyngn.com/support.
Cheers!
linuxct said:
You mean, a Cid face? LOL
You can revert by flashing the system.img via fastboot from the very same zip I mentioned before. You can get it here: http://builds.cyngn.com/factory/marmite/cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87.zip
Click to expand...
Click to collapse
Thank you very much, flashing the system.img with
Code:
fastboot flash system system.img
fixed the issue and I was able to update my system to the latest version and since it only changed the system partition, no data (files from internal/external storage) nor apps (not even their data) were deleted. After the update I had to flash TWRP, SuperSU and Xposed again.
boa05 said:
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
Click to expand...
Click to collapse
boa05 said:
Thank you very much, flashing the system.img with
Code:
fastboot flash system system.img
fixed the issue and I was able to update my system to the latest version and since it only changed the system partition, no data (files from internal/external storage) nor apps (not even their data) were deleted. After the update I had to flash TWRP, SuperSU and Xposed again.
Click to expand...
Click to collapse
Thank you, but unfortunately I've read this hint after trying the unsu method described here:
https://forum.xda-developers.com/showpost.php?p=63615067
I've installed the unsu-zip package and flashed the original boot.img via TWRP. It did not help, but since I did this I have another warning message when booting: "The dm-verity is not started in enforcing mode."
In the end I managed to get the update by installing the original zip package again and after this the OTA update worked.
What still remains is the new "dm-verity error message" right after booting....
Does anyone know if there is anywhere I can find the files to manually update to the new AOSP based ROM. Or has Wileyfox not released it?
(Or has anyone captured the PTA link?)
There is currently no new AOSP ROM. I've received only Cyanogen OS update (probably the last one?). According the Wileyfox statement on facebook, the new ROM (Nougat) will be released in the february...
rivierakid said:
There is currently no new AOSP ROM. I've received only Cyanogen OS update (probably the last one?). According the Wileyfox statement on facebook, the new ROM (Nougat) will be released in the february...
Click to expand...
Click to collapse
Nah they are releasing an update first to transition to their new rom.
"We have been ruthlessly testing this and planning a distribution for this update, with a rollout to be released beginning today with immediate effect." -Wileyfox Facebook
Click to expand...
Click to collapse
Then later (between February and end of Q1) they will release nougat. Its an easy mistake to make as they aren't too clear about it.
Thanks anyway.
It is unclear what kind of ROM will they release. According the statement it should be bloatware free OS
AOSP, Lineage OS, something else?
I really like cyanogenmod, so I hope there will be Lineage OS ROM in the future...
The new update
Hi, I'm not in the least technologically minded so please don't take the mick when I ask, will the new update delete the cyanogen os? Or is that something I will have to do? If so, what is safe to delete without damaging my phone?
Wow, that was a couple more questions then I had thought!
Thanks all.
Hello,
iam very frustrated by this OTA thing..
I had TWRP and SuperSU installed and i've tried everything but I can't install this OTA -.-" everytime i've tried it it gives me just an "ERROR".
1. I flashed the unSU zip in twrp.
2. I set the switch for stock recovery in developer options.
3 I fastboot flashed the stock recovery.img
4 I fastboot flashed the stock system.img
Then rebooted and did the update it just runs to like 20% and stops and then it shows me "ERROR" ..
Can somebody experienced help me pls This update is annoying I had to block it out of my mobile data use because it would eat up all my mobile data
EDIT: Maybe I have to relock my bootloader?
MCPoppa said:
Hello,
iam very frustrated by this OTA thing..
I had TWRP and SuperSU installed and i've tried everything but I can't install this OTA -.-" everytime i've tried it it gives me just an "ERROR".
1. I flashed the unSU zip in twrp.
2. I set the switch for stock recovery in developer options.
3 I fastboot flashed the stock recovery.img
4 I fastboot flashed the stock system.img
Then rebooted and did the update it just runs to like 20% and stops and then it shows me "ERROR" ..
Can somebody experienced help me pls This update is annoying I had to block it out of my mobile data use because it would eat up all my mobile data
EDIT: Maybe I have to relock my bootloader?
Click to expand...
Click to collapse
I don't think it'd be a good idea to mess with the bootloader for now. Also, I uninstalled SuperSU from the app. If you have xposed I suggest you uninstall that too (At least that's what I did). Sorry I can't help more I 'm still a little newby myself.
rivierakid said:
It is unclear what kind of ROM will they release. According the statement it should be bloatware free OS
AOSP, Lineage OS, something else?
I really like cyanogenmod, so I hope there will be Lineage OS ROM in the future...
Click to expand...
Click to collapse
Sadly, an OEM cannot rely on community-driven software, so it surely won't be CyanogenMod/Lineage. But, that doesn't mean that in the future we wouldn't be able to enjoy it thanks to custom ROM development
Jahane said:
Hi, I'm not in the least technologically minded so please don't take the mick when I ask, will the new update delete the cyanogen os? Or is that something I will have to do? If so, what is safe to delete without damaging my phone?
Wow, that was a couple more questions then I had thought!
Thanks all.
Click to expand...
Click to collapse
Welcome to the community!
This depends on what you understand about 'new update'. If the new update you're talking about is the currently rolling OTA, the one that's getting prompted on every phone right now, no, that won't delete CyanogenOS yet, but prepare the device to upgrade to a CyanogenOS-free Android 7.0 ROM, which will happen in a month or so. You won't have to do anything but let the phone update each and every single time it requests it. Cyanogen itself is not something you can remove as a user, unless you install what's called a custom ROM (this means, a different ROM software than the one provided by Wileyfox), so, you don't need to worry about it but keeping your device up-to-date as soon as it prompts you with an update ^_^
MCPoppa said:
Hello,
iam very frustrated by this OTA thing..
I had TWRP and SuperSU installed and i've tried everything but I can't install this OTA -.-" everytime i've tried it it gives me just an "ERROR".
1. I flashed the unSU zip in twrp.
2. I set the switch for stock recovery in developer options.
3 I fastboot flashed the stock recovery.img
4 I fastboot flashed the stock system.img
Then rebooted and did the update it just runs to like 20% and stops and then it shows me "ERROR" ..
Can somebody experienced help me pls This update is annoying I had to block it out of my mobile data use because it would eat up all my mobile data
EDIT: Maybe I have to relock my bootloader?
Click to expand...
Click to collapse
Try relocking like you said, but before, flash everything included in the latest CyanogenOS fasboot image zip (from here). To flash all of them at once, execute each and every of the following commands:
Code:
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash cache cache.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash modem NON-HLOS.bin
fastboot flash dsp adspso.bin
fastboot flash devcfg devcfg.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash keymaster keymaster.mbn
fastboot flash rpm rpm.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash splash splash.img
fastboot flash tz tz.mbn
Once done, relock your bootloader by doing:
Code:
fastboot oem lock
Please note, this probably doesn't fully lock your bootloader, as some propietary DRM keys might've been lost during the unlock process...
Good luck and please, keep us posted!
I made this tutorial because i see no ZCX TWRP here..
In this TUTORIAL, we will update MIUI 7.2.24 to MIUI 7.3.2 using our beloved TWRP
Why this happened ?
You will fail to update OTA if :
1. You modified boot.img
2. You modified system's folder
3. You are using UNPATCHED TWRP
Getprop-Fingerprint's command in TWRP, will give you string :
Xiaomi/cm_land/land:6.0.1/MOB30M/e9c4629b61:eng/test-keys
Not your real Fingerprint.
If you unpack TWRP, you can see that string on default.prop
LETS BEGIN THIS TRICK
Requirements:
1. TWRP (Of Course)
2. OTA FLASHER by SILFOX
3. miui_HM3SGlobal_7.2.24_b21bbbf2e4_6.0.zip
4. miui-blockota-land_global-7.2.24-7.3.2-4b1c573f58-6.0.zip
Instructions :
1. Download all required Files
2. Install OTA FLASHER and open it.
3. Choose Flash OTA
4. Choose miui_HM3SGlobal_7.2.24_b21bbbf2e4_6.0.zip for Current MIUI ROM
5. Choose miui-blockota-land_global-7.2.24-7.3.2-4b1c573f58-6.0.zip for OTA
6. Choose START FLASH
7. Your device will goto TWRP, and do its magic
8. After finish, you can flash SuperSu or anything
9. After that, "Disable DM-Verify", and then Reboot...
Awesome love this Totally.
ok that got past the preliminary round, but now my recovery falsely reports that my system partition has unexpected contents, but i have a systemless root and was carefull not to mount that system partition.
by chance can we further edit the update-script to remove checks altogether?
also whats this patched twrp you speak of? does it skip this part by it self?
Great work. By the way can you create the patched twrp recovery like zcx recovery? It would be very helpful.
Thanks
xdarkmario said:
ok that got past the preliminary round, but now my recovery falsely reports that my system partition has unexpected contents, but i have a systemless root and was carefull not to mount that system partition.
by chance can we further edit the update-script to remove checks altogether?
also whats this patched twrp you speak of? does it skip this part by it self?
Click to expand...
Click to collapse
You can only remove getprop check.
If you patch twrp, you can skip editing updater-script
P€πtex4869 said:
Great work. By the way can you create the patched twrp recovery like zcx recovery? It would be very helpful.
Thanks
Click to expand...
Click to collapse
Sorry, i cant.
But i'm working to make Ota flasher.
SILF0X said:
Sorry, i cant.
But i'm working to make Ota flasher.
Click to expand...
Click to collapse
Ohk
P€πtex4869 said:
Ohk
Click to expand...
Click to collapse
UPDATED ...
Doesn't this defeat the purpose?
The point was to not have to download that huge 1.5gb ROM every and just direct flash the OTA. Can't I just select the OTA and flash?
Sent from my Redmi 3S using Tapatalk
Download modded MIUI updater app
xdarkmario said:
Doesn't this defeat the purpose?
The point was to not have to download that huge 1.5gb ROM every and just direct flash the OTA. Can't I just select the OTA and flash?
Sent from my Redmi 3S using Tapatalk
Click to expand...
Click to collapse
There's a separate modded MIUI updater app available for download incremental updates.
Kindly download that app and download the OTAs through it.
@SILF0X
Does it work on miui 9 global Redmi 3S?. Thanks.
Can i'm using in mido redmi note 4x ?
Hey guys I wanna know about the Pie update I have mi Mi 8 Lite and as soon as i power up and conect to a wifi and update to 10.2.2.0 ODTMIXM was available so i updated and no problem i unlocked the bootloader (15 days wait time, sad) and flash twrp no root because is magisk and i can't hide root (even with magisk default hide root) for a bank app so is not rooted but since five days I was notified about and update to Pie miui 10.2.2.0PDTMIXM stable (persistent notification) but here are some questions:
* the twrp will cause a problem if I download this update and the updater applies or I have to remove twrp (I'll make a twrp backup just in case I don't have the original img file)
* I've read there no version of twrp for Pie and the version for 8.1 is not ideal. (correct me if i'm wrong)
* I might not need root, no problem the miui have some tweaks and I'm getting used to miui. (I had a Moto X Play with root and xposed and some modules)
* Is the first stable version, should I wait for a next Pie version with bugs solved.?
* I'm knew to miui less than a month with my Mi 8 Lite
orozcore said:
Hey guys I wanna know about the Pie update I have mi Mi 8 Lite and as soon as i power up and conect to a wifi and update to 10.2.2.0 ODTMIXM was available so i updated and no problem i unlocked the bootloader (15 days wait time, sad) and flash twrp no root because is magisk and i can't hide root (even with magisk default hide root) for a bank app so is not rooted but since five days I was notified about and update to Pie miui 10.2.2.0PDTMIXM stable (persistent notification) but here are some questions:
* the twrp will cause a problem if I download this update and the updater applies or I have to remove twrp (I'll make a twrp backup just in case I don't have the original img file)
* I've read there no version of twrp for Pie and the version for 8.1 is not ideal. (correct me if i'm wrong)
* I might not need root, no problem the miui have some tweaks and I'm getting used to miui. (I had a Moto X Play with root and xposed and some modules)
* Is the first stable version, should I wait for a next Pie version with bugs solved.?
* I'm knew to miui less than a month with my Mi 8 Lite
Click to expand...
Click to collapse
There's a TWRP for pie
mr_reaper said:
There's a TWRP for pie
Click to expand...
Click to collapse
So your suggest is that I download the Pie update and let updater installs it and reflash twrp (is it the same version?)
orozcore said:
So your suggest is that I download the Pie update and let updater installs it and reflash twrp (is it the same version?)
Click to expand...
Click to collapse
Which TWRP version u running?
mr_reaper said:
Which TWRP version u running?
Click to expand...
Click to collapse
sorry for the late reply the version i'm using is recovery-TWRP-3.2.3-1003-XIAOMI8LITE-CN-wzsx150
orozcore said:
So your suggest is that I download the Pie update and let updater installs it and reflash twrp (is it the same version?)
Click to expand...
Click to collapse
Yes. Update, boot in fastboot, connect to your PC, flash TWRP and youre good to go. Mind you that version 1003 is older that the one you need. Due to bad naming scheme, the latest you want is 0212. (12 February 2019).
https://forum.xda-developers.com/showpost.php?p=78876979&postcount=46
MetallicGR said:
Yes. Update, boot in fastboot, connect to your PC, flash TWRP and youre good to go. Mind you that version 1003 is older that the one you need. Due to bad naming scheme, the latest you want is 0212. (12 February 2019).
https://forum.xda-developers.com/showpost.php?p=78876979&postcount=46
Click to expand...
Click to collapse
You might want to go with TWRP 0121 (also Pie compatible) instead, as someone reported in another thread having problems doing a restore with 0212 and nobody has yet verified if 0212 can actually do a successful restore. We are still a fairly small group here.
EDIT: Also, the stock Pie release is good. I am currently on Pixel Experience but may switch back to stock rooted at some point. Until Xiaomi releases the Pie kernel sources, no custom ROM is going to be perfect.
lexridge said:
You might want to go with TWRP 0121 (also Pie compatible) instead, as someone reported in another thread having problems doing a restore with 0212 and nobody has yet verified if 0212 can actually do a successful restore. We are still a fairly small group here.
Click to expand...
Click to collapse
Has anyone reported a successful restore with *any* version of TWRP on the Mi8 Lite? I have only seen the unsuccessful one you mentioned, and another one who couldn't restore with either 0121 or 0212. I have not tried it myself, and believe that most people are using TWRP only to flash magisk or custom roms so far.
---------- Post added at 02:39 AM ---------- Previous post was at 02:22 AM ----------
MetallicGR said:
Yes. Update, boot in fastboot, connect to your PC, flash TWRP and youre good to go.
Click to expand...
Click to collapse
The default settings in TWRP is to automatically restart the phone after an ota. As the ota overwrites the recovery with the stock version, we would normally need to reflash TWRP.
However the wzsx TWRP allows you to disable this automatic reboot in its settings. This should mean that we can reflash TWRP (and magisk if used) immediately after flashing the ota while still within TWRP, before restarting to the new system, thus avoiding the need for fastboot/PC.
This is just my theory - I haven't tried it myself as I haven't decided to do the pie ota yet.
chan200606 said:
Has anyone reported a successful restore with *any* version of TWRP on the Mi8 Lite? I have only seen the unsuccessful one you mentioned, and another one who couldn't restore with either 0121 or 0212. I have not tried it myself, and believe that most people are using TWRP only to flash magisk or custom roms so far.
---------- Post added at 02:39 AM ---------- Previous post was at 02:22 AM ----------
The default settings in TWRP is to automatically restart the phone after an ota. As the ota overwrites the recovery with the stock version, we would normally need to reflash TWRP.
However the wzsx TWRP allows you to disable this automatic reboot in its settings. This should mean that we can reflash TWRP (and magisk if used) immediately after flashing the ota while still within TWRP, before restarting to the new system, thus avoiding the need for fastboot/PC.
This is just my theory - I haven't tried it myself as I haven't decided to do the pie ota yet.
Click to expand...
Click to collapse
It is disturbing nobody has yet tested a TWRP restore. I would try it myself, but right now I cannot afford any long term downtime, as my mom is having health issues and I cannot take the chance of missing a call in case of emergency. .
Regarding flashing TWRP after update.... I certainly agree with your theory...and this could be done in either of two ways:
Method One, backup the Recovery only within TWRP. You MUST do this before taking the update!!! This lets you simply restore your existing recovery after the update. Not tested, but should work just fine assuming TWRP can indeed successfully restore (unknown).
Method Two, my personal favorite, which is what I did, was build an updated flashable .zip file of TWRP from the 1003 zip file (the only version I could find as a flashable .zip.) Just zip edit the BlaBlaBla_1003.zip file, replacing the 1003.img with the newer version 0121.img or 0212.img (after adding new .img file, delete old 1003.img file from the zip). You must also edit the /META-INF/com/google/android/update.binary (not really a binary, but actually text) to reflect the new .img filename within the zip. Update/Save zip file with new changes. Rename zip to new version name then check it to make sure your changes remained intact. Copy to phone storage. It will flash fine. Already tested. I can provide the 0121 zip file if needed, or create a 0212 flashable TWRP version as well if somebody wants it.
i havent tried cause im still waiting on bootloader to be unlocked when i check earlier i had 124 hrs
lexridge said:
Method Two, my personal favorite, which is what I did, was build an updated flashable .zip file of TWRP from the 1003 zip file (the only version I could find as a flashable .zip.) Just zip edit the BlaBlaBla_1003.zip file, replacing the 1003.img with the newer version 0121.img or 0212.img (after adding new .img file, delete old 1003.img file from the zip). You must also edit the /META-INF/com/google/android/update.binary (not really a binary, but actually text) to reflect the new .img filename within the zip. Update/Save zip file with new changes. Rename zip to new version name then check it to make sure your changes remained intact. Copy to phone storage. It will flash fine. Already tested. I can provide the 0121 zip file if needed, or create a 0212 flashable TWRP version as well if somebody wants it.
Click to expand...
Click to collapse
Why wouldn't you just flash the IMG file to the recovery partition under TWRP?
Not many people will shutdown their phones to test the restore guys. It's difficult, but we have to wait for someone to try this with the latest version of twrp. Nothing dusturbing here in my opinion. We will thank whoever tries this first that's for sure.
chan200606 said:
Why wouldn't you just flash the IMG file to the recovery partition under TWRP?
Click to expand...
Click to collapse
Interesting. I did not know you can flash img files directly with TWRP. Haha. Color me stupid!! How does TWRP know which partition to write the .img to? Does it give you a choice?
Yes it does. Choose recovery.
lexridge said:
It is disturbing nobody has yet tested a TWRP restore. I would try it myself, but right now I cannot afford any long term downtime, as my mom is having health issues and I cannot take the chance of missing a call in case of emergency. .
Regarding flashing TWRP after update.... I certainly agree with your theory...and this could be done in either of two ways:
Method One, backup the Recovery only within TWRP. You MUST do this before taking the update!!! This lets you simply restore your existing recovery after the update. Not tested, but should work just fine assuming TWRP can indeed successfully restore (unknown).
Method Two, my personal favorite, which is what I did, was build an updated flashable .zip file of TWRP from the 1003 zip file (the only version I could find as a flashable .zip.) Just zip edit the BlaBlaBla_1003.zip file, replacing the 1003.img with the newer version 0121.img or 0212.img (after adding new .img file, delete old 1003.img file from the zip). You must also edit the /META-INF/com/google/android/update.binary (not really a binary, but actually text) to reflect the new .img filename within the zip. Update/Save zip file with new changes. Rename zip to new version name then check it to make sure your changes remained intact. Copy to phone storage. It will flash fine. Already tested. I can provide the 0121 zip file if needed, or create a 0212 flashable TWRP version as well if somebody wants it.
Click to expand...
Click to collapse
I haven't noticed the restore of twpr backups failed, I only did the backup.
Can you share the flash file or the img of 0212 or 0121?
So to be clear.
* Make twrp backup
* donwload the update
* let it update and hope no lost of data
* wait to boot and enter fastboot and flash img 0212 or 0121
* flash magisk and try to test my bank apps that detect root, i couldn't hide root with magisk for these apps. (i don't need magisk so much)
I hope no mess with my phone.
MetallicGR said:
Yes it does. Choose recovery.
Click to expand...
Click to collapse
good to know you can flash a img within twpr so i'll try when I update
mr_reaper said:
i havent tried cause im still waiting on bootloader to be unlocked when i check earlier i had 124 hrs
Click to expand...
Click to collapse
Yes is bad to wait so much time and there's nothing you can do I read about the version of the unlocker but with no luck. So I finally have unlocked bootloader.
Actually v0212 is restoring, I restored data from Arrow to Havoc and no problem with that.
Just all the recoveries and roms are acting weird, I´m not sure if it´s only my device; any AOSP rom is showing bootanimation at first reboot, recovery not responding touch but then press pwr button and after that screen works normally, at time to bootup for first time screen appears totally black then press pwr to screen off and pwr to wake up and now screen is working again, luckily at second reboot all this is normalize.
---------- Post added at 10:11 PM ---------- Previous post was at 09:52 PM ----------
orozcore said:
I haven't noticed the restore of twpr backups failed, I only did the backup.
Can you share the flash file or the img of 0212 or 0121?
So to be clear.
* Make twrp backup
* donwload the update
* let it update and hope no lost of data
* wait to boot and enter fastboot and flash img 0212 or 0121
* flash magisk and try to test my bank apps that detect root, i couldn't hide root with magisk for these apps. (i don't need magisk so much)
I hope no mess with my phone.
Click to expand...
Click to collapse
If you didn´t read before a member linked to you In the post #6 both TWRP versions.
About your steps:
- No need to backup previous TWRP, just flash the new image and reboot to recovery again.
- If you already have Magisk no need to flash it again so you won´t lose root status nor any data/settings of the rom.
If you want to unroot the 0212 has this option in advanced menu.
orozcore said:
I haven't noticed the restore of twpr backups failed, I only did the backup.
Can you share the flash file or the img of 0212 or 0121?
So to be clear.
* Make twrp backup
* donwload the update
* let it update and hope no lost of data
* wait to boot and enter fastboot and flash img 0212 or 0121
* flash magisk and try to test my bank apps that detect root, i couldn't hide root with magisk for these apps. (i don't need magisk so much)
I hope no mess with my phone.
Click to expand...
Click to collapse
You should probably update your TWRP first and foremost, otherwise no access to data after you flash the update.. You will also need the Magisk Manager as an apk somewhere on your microSD card. I edited your to-do list:
* Download Magisk Manager and store on your microSD card.
* Flash new TWRP (0212 or 0121).
* Make a full twrp backup and do a recovery only backup as well
* download the update
* let it update and hope no lost of data
* Reflash img or TWRP Recovery backup 0212 or 0121
* Reboot recovery, check that you can decrypt data
* flash magisk and try to test my bank apps that detect root, i couldn't hide root with magisk for these apps. (i don't need magisk so much)
* After first boot, manually install your saved Magisk Manager app from microSD card. Run it. Check if all is good.
Do you use Titanium Backup? If so, make a full TB before doing any of this.
---------- Post added at 01:04 AM ---------- Previous post was at 12:42 AM ----------
SubwayChamp said:
Actually v0212 is restoring, I restored data from Arrow to Havoc and no problem with that.
Just all the recoveries and roms are acting weird, I´m not sure if it´s only my device; any AOSP rom is showing bootanimation at first reboot, recovery not responding touch but then press pwr button and after that screen works normally, at time to bootup for first time screen appears totally black then press pwr to screen off and pwr to wake up and now screen is working again, luckily at second reboot all this is normalize.
---------- Post added at 10:11 PM ---------- Previous post was at 09:52 PM ----------
Click to expand...
Click to collapse
Good to know that it is working for you. I will try a restore over the weekend myself, as I plan on getting rid of PE ROM. Not very happy with it, and the dev is not responding to anyone at all. I will probably just go back to stock PIE with alternate launcher.
Regarding your odd problems, I am not having any of your mentioned issues at all. My reboot times are very speedy and recovery touch has always worked from the start. I have only flashed one 3rd party ROM so far. Pixel Experience. It is actually a pretty good ROM, but the camera(s) are a bit flaky. I need my camera to work 100%. I did just install the MiX Cam, which so far is working really well. I have more testing to do before I make a decision. It seems camera apps work great for a few days, then suddenly start crashing. Ugh!
lexridge said:
Good to know that it is working for you. I will try a restore over the weekend myself, as I plan on getting rid of PE ROM. Not very happy with it, and the dev is not responding to anyone at all. I will probably just go back to stock PIE with alternate launcher.
Regarding your odd problems, I am not having any of your mentioned issues at all. My reboot times are very speedy and recovery touch has always worked from the start. I have only flashed one 3rd party ROM so far. Pixel Experience. It is actually a pretty good ROM, but the camera(s) are a bit flaky. I need my camera to work 100%. I did just install the MiX Cam, which so far is working really well. I have more testing to do before I make a decision. It seems camera apps work great for a few days, then suddenly start crashing. Ugh!
Click to expand...
Click to collapse
I never saw before this kind of weird behaviour btw is working generally speaking fine.
I´m not a fan of camera but the stock is so far better, I noticed that HavocOs rom has the feature to enable camera2 api and EIS, maybe you might try it. Regarding to use a custom launcher on stock miui rom there´s Poco launcher that keeps the same system icons than theme chosen and is very fast.
Just received the new update.
Thanks for notification, also just received it.
How to update with unlocked bootloader, TWRP and rooted with Magisk?
Download the hole update zip, flash it in TWRP and immediately Magisk afterwards?
bmwbasti said:
How to update with unlocked bootloader, TWRP and rooted with Magisk?
Download the hole update zip, flash it in TWRP and immediately Magisk afterwards?
Click to expand...
Click to collapse
Backup everything on your phone.
From what I understand; if you flash an OTA zip you'll end up on MIUI without root or TWRP unless, whilst still in TWRP after the zip has flashed, you immediately flash TWRP's image again along with Magisk without rebooting even once so that both persist.
That's if TWRP let's you flash whatever file ends up in /sdcard/downloaded_rom to begin with. Flashing MIUI zips - typically only supported by OrangeFox if I remember correctly. And if I'm right MIUI updater will download the full rom instead of an OTA if it detects a custom recovery.
I'd advise backing up everything before going ahead. If you want OTA your best bet might be to go on your PC and do "fastboot boot twrp.img" instead of "fastboot flash recovery twrp.img" then use the temporary TWRP to install the OTA zip and Magisk zip - that way it'll patch the stock bootloader.
I'd wait for someone with a little more knowledge though. I could be deathly wrong as I've only read this stuff and not updated MIUI with OTA before.
Hello Mi 9T Pro with Global ROM owners!
For someone who have installed V11.0.2.0QFKMIXM update and have ROOT => Can you please share these following two files "/vendor/lib/liboemcrypto.so" and "/vendor/lib64/liboemcrypto.so", thanks!
Micdu70 said:
Hello Mi 9T Pro with Global ROM owners!
For someone who have installed V11.0.2.0QFKMIXM update and have ROOT => Can you please share these following two files "/vendor/lib/liboemcrypto.so" and "/vendor/lib64/liboemcrypto.so", thanks!
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=10zBJh6Ud8cqMykHSfrupENSc8w8C2tOz
The one named with -1 is lib64 version
And one camera bug.
In Spanish (Spain) language selected camera FC in pro mode.
In Spanish (America) all is ok.
here's the download link
https://bigota.d.miui.com/V11.0.2.0.QFKMIXM/miui_RAPHAELGlobal_V11.0.2.0.QFKMIXM_6050442ee4_10.0.zip
r4yv3n said:
https://drive.google.com/folderview?id=10zBJh6Ud8cqMykHSfrupENSc8w8C2tOz
The one named with -1 is lib64 version
And one camera bug.
In Spanish (Spain) language selected camera FC in pro mode.
In Spanish (America) all is ok.
Click to expand...
Click to collapse
Thanks! Can you post a screen of Widevine informations with "DRM Info" app? Thx again.
Any OTA at this time or just full rom?
Found ota file, downloading now
https://bigota.d.miui.com/V11.0.2.0...QFKMIXM-V11.0.2.0.QFKMIXM-a84af52957-10.0.zip
Micdu70 said:
Thanks! Can you post a screen of Widevine informations with "DRM Info" app? Thx again.
Click to expand...
Click to collapse
https://drive.google.com/file/d/10IJ_zGk77vxgeTpbOuR0GY9lhekbivSz/view?usp=drivesdk
?
This is from 11.0.1
I had to return back , stuck in fastboot ?
how much sot here?
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Giangvo200837 said:
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Click to expand...
Click to collapse
I think it's been withdrawn. It never officially came out of beta. They're still trying to fix a few minor Q bugs like battery drain and camera app issues; on top of that the development for MIXM in particular has been a bit behind - probably due to Chinese new year and/or Coronavirus. Though it's possible the MIXM (or Global) branch is compiled outside China; truth be told I have no idea why the Q update has been handled so badly for this particular device channel. The Mi9T Pro's development has been seemingly 'paused' as of late for Global users.
Reminds me a lot of my Redmi 5 Plus. Development was paused for much of the product's lifespan and they never fixed certain bugs on the device; just merged MIUI branch changes. Hopefully the same doesn't happen to the Mi9T Pro. It is a flagship-esque device and barely six months old (August 2019).
?Miui Global Stable Mi V11.0.2
? Android 10 | Miui 11
? 2/15/2020
?Changelog:
Deodex
Add Call, Contact and SMS MIUI
Center Clock
And You
For the Install Process MANDATORY Using Custom Recovery DX By MiRoom
If you do not use Custom Recovery DX By MiRoom, it will definitely enter Fastboot mode
? For the installation process, please see / download the video below. ?
? Download Video / Streaming: here
? Download Rom: here ?
Download vbmeta.img: here | Mirror
Download Custom Recovery DX By MiRoom Install via Fastboot mode : here
By Redmi K20 Pro Indonesia
Giangvo200837 said:
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Click to expand...
Click to collapse
I had to download the OTA zip someone sent here and ended up manually updating. Tap a few times on the 11 in the updater until a toast message pops up saying that you enabled additional options and then tap on 3 dots and select Choose update package and browse to the zip you downloaded and select it.
Honestly I have like since forever used custom ROMs on my phones and this time I wanted to have the "stock experience", but if they keep delaying updates like this I'll just switch to xiaomi.eu weekly builds.
Since 31st of January Xiaomi suspended temporarily all updates due to the Corona virus outbreak.
How do i flash ota file manually on non rooted phone?
1. Be sure you have the correct OTA file
2. Place the OTA file in a folder of the internal storage named "downloaded_rom".
3. Go to settings/about the phone/systemupdate and tick the 3 dots on the right top
4. Then tick "choose update package" with this text or similar and go to the folder where you copied the Ota file and choose that file
Then let the Ota file update do it's work and after reboot it is done.
Snah001 said:
1. Be sure you have the correct OTA file
2. Place the OTA file in a folder of the internal storage named "downloaded_rom".
3. Go to settings/about the phone/systemupdate and tick the 3 dots on the right top
4. Then tick "choose update package" with this text or similar and go to the folder where you copied the Ota file and choose that file
Then let the Ota file update do it's work and after reboot it is done.
Click to expand...
Click to collapse
The option "Choose update package" doesn't show up unless you tap the 11 in the Updater a few times, because manually installing a .zip is an advanced (duh) option.
Was assuming that people here would know.