I made this tutorial because i see no ZCX TWRP here..
In this TUTORIAL, we will update MIUI 7.2.24 to MIUI 7.3.2 using our beloved TWRP
Why this happened ?
You will fail to update OTA if :
1. You modified boot.img
2. You modified system's folder
3. You are using UNPATCHED TWRP
Getprop-Fingerprint's command in TWRP, will give you string :
Xiaomi/cm_land/land:6.0.1/MOB30M/e9c4629b61:eng/test-keys
Not your real Fingerprint.
If you unpack TWRP, you can see that string on default.prop
LETS BEGIN THIS TRICK
Requirements:
1. TWRP (Of Course)
2. OTA FLASHER by SILFOX
3. miui_HM3SGlobal_7.2.24_b21bbbf2e4_6.0.zip
4. miui-blockota-land_global-7.2.24-7.3.2-4b1c573f58-6.0.zip
Instructions :
1. Download all required Files
2. Install OTA FLASHER and open it.
3. Choose Flash OTA
4. Choose miui_HM3SGlobal_7.2.24_b21bbbf2e4_6.0.zip for Current MIUI ROM
5. Choose miui-blockota-land_global-7.2.24-7.3.2-4b1c573f58-6.0.zip for OTA
6. Choose START FLASH
7. Your device will goto TWRP, and do its magic
8. After finish, you can flash SuperSu or anything
9. After that, "Disable DM-Verify", and then Reboot...
Awesome love this Totally.
ok that got past the preliminary round, but now my recovery falsely reports that my system partition has unexpected contents, but i have a systemless root and was carefull not to mount that system partition.
by chance can we further edit the update-script to remove checks altogether?
also whats this patched twrp you speak of? does it skip this part by it self?
Great work. By the way can you create the patched twrp recovery like zcx recovery? It would be very helpful.
Thanks
xdarkmario said:
ok that got past the preliminary round, but now my recovery falsely reports that my system partition has unexpected contents, but i have a systemless root and was carefull not to mount that system partition.
by chance can we further edit the update-script to remove checks altogether?
also whats this patched twrp you speak of? does it skip this part by it self?
Click to expand...
Click to collapse
You can only remove getprop check.
If you patch twrp, you can skip editing updater-script
P€πtex4869 said:
Great work. By the way can you create the patched twrp recovery like zcx recovery? It would be very helpful.
Thanks
Click to expand...
Click to collapse
Sorry, i cant.
But i'm working to make Ota flasher.
SILF0X said:
Sorry, i cant.
But i'm working to make Ota flasher.
Click to expand...
Click to collapse
Ohk
P€πtex4869 said:
Ohk
Click to expand...
Click to collapse
UPDATED ...
Doesn't this defeat the purpose?
The point was to not have to download that huge 1.5gb ROM every and just direct flash the OTA. Can't I just select the OTA and flash?
Sent from my Redmi 3S using Tapatalk
Download modded MIUI updater app
xdarkmario said:
Doesn't this defeat the purpose?
The point was to not have to download that huge 1.5gb ROM every and just direct flash the OTA. Can't I just select the OTA and flash?
Sent from my Redmi 3S using Tapatalk
Click to expand...
Click to collapse
There's a separate modded MIUI updater app available for download incremental updates.
Kindly download that app and download the OTAs through it.
@SILF0X
Does it work on miui 9 global Redmi 3S?. Thanks.
Can i'm using in mido redmi note 4x ?
Related
Hi,
For anyone here using the xiaomi.eu rom please help. I tried posting on xiaomi.eu but i cannot create thread for some reason.
Im on redmi note 2 xiaomi.eu rom 5.11.19/20 and i got an update notification, this never happened before. I've been using xiaomi.eu rom since 5.10.22.
Seeing the size its not an OTA update, its says
MIUI 5.11.26 | Weekly | 690.78M
Other
Bug fixes and system optimizations.
So can i update using the updater app ? or should i download the zip and flash it in TWRP ?
And if i can use the updater app then will the next weekly update
Thanks in advance
Yes, it's an OTA update. It's big because xiaomi.eu release only full rom as ota update.
It's the same to download the rom manually and install via TWRP, but you can use the updater app.
~ Xiaomi Redmi Note 2 Prime ~
Yes, thats normal for your to get it over OTA. And if you do manage to flash TWRP, do share with me, I had problem flashing the TWRP. Makasih.
feds64 said:
Yes, thats normal for your to get it over OTA. And if you do manage to flash TWRP, do share with me, I had problem flashing the TWRP. Makasih.
Click to expand...
Click to collapse
I flash TWRP using old rom (before 5.10.22) by changing its name to update.zip copying it to internal storage and use updater app to boot to recovery and flash that update.zip. I read that newer rom have signature checking.
Adrian.Chandra said:
I flash TWRP using old rom (before 5.10.22) by changing its name to update.zip copying it to internal storage and use updater app to boot to recovery and flash that update.zip. I read that newer rom have signature checking.
Click to expand...
Click to collapse
Thanks iya...
Adrian.Chandra said:
I flash TWRP using old rom (before 5.10.22) by changing its name to update.zip copying it to internal storage and use updater app to boot to recovery and flash that update.zip. I read that newer rom have signature checking.
Click to expand...
Click to collapse
Newer rom -> private signature key
Older rom -> public signature key
~ Xiaomi Redmi Note 2 Prime ~
A reddit user captured his link to the DP
Here is the link
https://android.googleapis.com/pack.../f9cb176ee75399a48e927d9f1bd6aeb6a643272c.zip
Credit: https://m.reddit.com/r/Nexus6P/comments/5edfam/captured_my_ota_url/?compact=true
Flash guide: *should* work
1. Boot twrp on DP1
2. flash SU of choice
3. reboot
4. install FlashFire from play store
5. Select "Flash firmware package"
6. Select the zip
7. Flash it!
**** A FEW DISCLAIMERS
**** TWRP seems to be based on 6.0.1 and the OTA can only be flashed on 7.1.1
**** In this case twrp will NOT flash this OTA file
**** FlashFire IS REQUIRED
**** I am not google. Yes I am sorry that force encrypt wiped your data or you got stuck in
**** a boot loop because you flashed it incorrectly BUT I am NOT google, I am NOT even
**** the person who captured the link for the ota ALL I DID WAS SHARE IT
**** If your data partition got wiped, you got stuck in a boot loop, or the guide didn't work
**** chances are you did something wrong
**** if you would like support but Google up in the DMs
**** I am happy to help just know I won't troubleshoot what you screwed up
Would we get a full OTA as well?
gqukyo said:
Would we get a full OTA as well?
Click to expand...
Click to collapse
If by full OTA you mean full ROM zip, here it is.
WelcomeToTheSkye said:
A reddit user captured his link to the DP
Here is the link
https://android.googleapis.com/pack.../f9cb176ee75399a48e927d9f1bd6aeb6a643272c.zip
Credit: https://m.reddit.com/r/Nexus6P/comments/5edfam/captured_my_ota_url/?compact=true
Click to expand...
Click to collapse
Sorry for being a noob but do I flash the zip file through TWRP or is there some other way? I am rooted with custom recovery on DP1.
Thanks
marmeak7 said:
Sorry for being a noob but do I flash the zip file through TWRP or is there some other way? I am rooted with custom recovery on DP1.
Thanks
Click to expand...
Click to collapse
If you're rooted, use flash fire from play. It restores twrp and root after updating. Haven't used any other method. No problems. Best app ever.
Just updated. Sound louder, November security patch and overall smoother scrolling.
No regrets getting the 6P. Amazing phone.?
It work fined at my Nexus 6p. All the rooted apps working fine. Thank you very much for your sharing. Appreciated it.
Just curius, has anyone of you guys unencrypted?
I installed it with flashfire but I'm still at DP1... Am I doing something wrong?
I installed it as flash zip or ota but nothing still got the message to update.
Is it because I have installed custom kernel?
Can't flash it in TWRP --> error
edit: I got E3001: the build fingerprint doesn't match. How can I fix this?
I succesfully flashed using Flashfire.
First thing I noticed is the many (repeating) superuser notifications I get for apps getting root during boot.
DRD70 said:
I installed it with flashfire but I'm still at DP1... Am I doing something wrong?
I installed it as flash zip or ota but nothing still got the message to update.
Is it because I have installed custom kernel?
Click to expand...
Click to collapse
the same for me... I only have twrp and have modified system... maybe is because of that... but I tought that would not be a problem... guess I'm going the twrp way
hmm, now I get it... this is not a full ota file.
Will I be able to flash it via TWRP like I did with the full OTA file from DP1 ??
^You need the full ota not this type of ota...
So this is the update from DP1 to DP2, correct? Is there any other way to install it besides with Flashfire? I've always installed from my PC, so is there any way to sideload it or install the zip through TWRP?
DRD70 said:
I installed it with flashfire but I'm still at DP1... Am I doing something wrong?
I installed it as flash zip or ota but nothing still got the message to update.
Is it because I have installed custom kernel?
Click to expand...
Click to collapse
You must be on dp1 and select flash firmware package not flash zip
ahmd gomaa said:
You must be on dp1 and select flash firmware package not flash zip
Click to expand...
Click to collapse
I was on dp1 and my first selection was firmware package and nothing happened. So i tried the other with the same outcome.
I finally revert it to stock and got ota update the dp2 since I'm a beta tester and root it again.
Rooted with TWRP on NPF10C
So I'm rooted and have TWRP installed, how can I update to DP2 ?
aakash dabrase said:
So I'm rooted and have TWRP installed, how can I update to DP2 ?
Click to expand...
Click to collapse
Install FlashFire from the play store and select firmware
swa100 said:
Can't flash it in TWRP --> error
edit: I got E3001: the build fingerprint doesn't match. How can I fix this?
Click to expand...
Click to collapse
Noted it in the op
Twrp is based on 6.0.1 afaik just use FlashFire
WelcomeToTheSkye said:
Install FlashFire from the play store and select firmware
Click to expand...
Click to collapse
Here's what I did:
1. Downloaded the OTA (137 MB) on pc.
2. Copied it to phone.
3. Selected Flash OTA in flashfire and selected the zip.
4. Flashfire failed to do it.
Should I use flash firmware option instead of flash OTA?
Also there are further options to select like recovery etc. What about them?
aakash dabrase said:
Here's what I did:
1. Downloaded the OTA (137 MB) on pc.
2. Copied it to phone.
3. Selected Flash OTA in flashfire and selected the zip.
4. Flashfire failed to do it.
Should I use flash firmware option instead of flash OTA?
Also there are further options to select like recovery etc. What about them?
Click to expand...
Click to collapse
Yep select firmware (it says that in op) select what you would like to keep
Prerequisites :
Running Stock MIUI
Unlocked Bootloader
Fastboot
Disclaimer : I am not responsible for any damage to your device.
Click to expand...
Click to collapse
Download :
11.0.1 Patched
Instructions :
Download the patched boot image
Install the latest version of Magisk Manager
Reboot the phone in fastboot mode [Power + Volume Down]
Use the following command via command prompt :
Code:
fastboot flash boot magisk_patched.img
fastboot reboot
The phone will reboot into system.
Open Magisk Manager & It'll Show Magisk Is Installed.
You've got a rooted Redmi K20 Pro.
Patched Boot Image Not Available For Your Model Yet? :
1. Download the fastboot flashable stock rom zip from the firmware thread
2. Copy the boot.img to internal storage of your device
3. Install Magisk Manager and tap on patch boot image.
4. Select the boot.img that you just copied
5. A patched boot.img will be placed in the Downloads folder on your device
6. Copy the patched image file to your workstation and follow the afformentioned fastboot instructions
Regards,
acervenky
Reserved
What boot image is it from?
Chinese, Indian ROM?
Edit: my bad, just reread the title :silly:
will the procedure wipe my personal data?
possible to receive OTA after root? thank you very much
KramYY said:
will the procedure wipe my personal data?
possible to receive OTA after root? thank you very much
Click to expand...
Click to collapse
No you won't lose your personal data, and yes you can still receive OTAs.
Regards,
acervenky
Thanks for sharing.. Working perfectly
Will test more update you incase of any issues
Sent from my Redmi K20 Pro using Tapatalk
Do you think there is any chance of getting the higher refresh rate mods working with this rom at all? TIA
I'm a little confused with the instructions, Following instruction number 1 and 2, I need to check for the OTA update and then press install button but I don't see any install or update button as there is no OTA update available right now. am I missing something?
P12AV33N said:
I'm a little confused with the instructions, Following instruction number 1 and 2, I need to check for the OTA update and then press install button but I don't see any install or update button as there is no OTA update available right now. am I missing something?
Click to expand...
Click to collapse
The instructions are to maintain root when new OTAs arrive!
For now you don't need to refer them!
Regards,
acervenky
acervenky said:
The instructions are to maintain root when new OTAs arrive!
For now you don't need to refer them!
Regards,
acervenky
Click to expand...
Click to collapse
Sorry for my noob question but
to root my device all I have to do is Unlock the bootloader, install magisk manager apk and select the direct install option from magisk app. right?
P12AV33N said:
Sorry for my noob question but
to root my device all I have to do is Unlock the bootloader, install magisk manager apk and select the direct install option from magisk app. right?
Click to expand...
Click to collapse
You need to unlock the bootloader first, then install magisk manager and flash the patched boot image via fastboot mode.
Regards,
acervenky
acervenky said:
You need to unlock the bootloader first, then install magisk manager and flash the patched boot image via fastboot mode.
Regards,
acervenky
Click to expand...
Click to collapse
okay got it, is there any twrp port available for this specific device as if I'm not wrong the other guide available for Root and Recovery is for the device "Raphael". Thank you very much for your precious time.
P12AV33N said:
okay got it, is there any twrp port available for this specific device as if I'm not wrong the other guide available for Root and Recovery is for the device "Raphael". Thank you very much for your precious time.
Click to expand...
Click to collapse
No device specific port is not yet available, I had flashed a couple of recoveries most of them resulting in bootloop. Some of them do work!
Regards,
acervenky
About maintaing root with an OTA. I assume you are talking about installing it via TWRP right? And when you say don't reboot (step 3) you mean after installing the OTA right? Also the option on step 5 will it be availble in the TWRP when I will try to flask magisk?
Thanks a lot
Edit - I use the TWRP from wzsx150 and I am on the 9.7.27 developer rom from xiaomi.eu
b0b3rman said:
About maintaing root with an OTA. I assume you are talking about installing it via TWRP right? And when you say don't reboot (step 3) you mean after installing the OTA right? Also the option on step 5 will it be availble in the TWRP when I will try to flask magisk?
Thanks a lot
Click to expand...
Click to collapse
The process mentioned in OP doesn't require TWRP, the option 5 will be available in the magisk manager itself!
If you're a advanced user and have flashed TWRP you do not need to follow this method, just flash the magisk zip and you're ready to go!
Regards,
acervenky
Oh ok thanks alot!! Last thing should I reboot after installing the OTA via TWRP in order to flash the magisk or not as you mention in your method/guide? If this is off topic sorry
b0b3rman said:
Oh ok thanks alot!! Last thing should I reboot after installing the OTA via TWRP in order to flash the magisk or not as you mention in your method/guide? If this is off topic sorry
Click to expand...
Click to collapse
Once you install the OTA and reboot you will lose TWRP as it will be replaced by the stock recovery!
Simply flash TWRP back and flash the magisk zip and you should be good to go!
Regards,
acervenky
Will I lose data during the bootloader unlock process?
If yes what is the best way to backup all my data
Edit: Also need to know any precautions I need to take before and during the process.
superuser#1508 said:
Will I lose data during the bootloader unlock process?
If yes what is the best way to backup all my data
Edit: Also need to know any precautions I need to take before and during the process.
Click to expand...
Click to collapse
Yes you'll lose your data during the bootloader unlock process, best way would be to backup all of your data on your PC first.
The only precaution is that you should be on Indian Firmware 10.3.3!
Regards,
acervenky
acervenky said:
No device specific port is not yet available, I had flashed a couple of recoveries most of them resulting in bootloop. Some of them do work!
Regards,
acervenky
Click to expand...
Click to collapse
Great work! I cannot fully install magisk as I get bootloop everytime I install the zip in the manager (then have to wipe data etc). Im assuming this way I can say goodbye to TWRP and have a fully functional magisk
However, this would also work on chinese phone flashed with Indian/Global ROM yes?
If you've flashed a non-stock recovery like TWRP*, you can not use the OTA update feature. You need to flash the full ROM via TWRP.
* TWRP is now officially supported, make sure you flash that version if you're using an older, unofficial TWRP.
1. Obtain the ROM you want to install. Make sure the download is from miui.com if you want stock
Official site -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab. The website does not update links immediately after a ROM update is released, so you may have to do a bit of digging if you want a very recent update.
You can also check ROM links on third party sites like ezbox.idv.tw, again, make sure the actual download links are from miui.com and not somewhere else.
Latest EEA ROM(Android 10) as of 2020-10-24 -
V12.0.3.0.QFJEUXM
Nightly official LineageOS builds
2. Get into TWRP
Either run 'adb reboot recovery'
Or power phone off and boot into TWRP by holding PWR+VOL_UP during boot
3. Upload the ROM to the phone
Code:
adb push ~/Downloads/[B]miui_DAVINCIEEAGlobal_V12.0.3.0.QFJEUXM_12b99693bc_10.0.zip[/B] /sdcard/
4. Flash the ROM via TWRP
5. Flash Magisk if you use it, because flashing the ROM deletes it.
6. Remove the update file:
Code:
adb shell rm /sdcard/[B]miui_DAVINCIEEAGlobal_V12.0.3.0.QFJEUXM_12b99693bc_10.0.zip[/B]
That's it! Reboot your phone into your new ROM!
Also check out my debloat list and my detailed phone settings.
Additional note - formatting /system will brick your phone and you'll have to recover using a fastboot ROM.
Please can I get the 10.3.15 ota zip for the official recovery I cant get the update and my phone is now on 10.3.12 it always say no update available even though I have done the update before and returned to 10.3.12 but it does show it to me again and also my otg doesn't work . please help me
Benfatica said:
Please can I get the 10.3.15 ota zip for the official recovery I cant get the update and my phone is now on 10.3.12 it always say no update available even though I have done the update before and returned to 10.3.12 but it does show it to me again and also my otg doesn't work . please help me
Click to expand...
Click to collapse
OTA zip is here => https://bigota.d.miui.com/V10.3.15....PFJEUXM-V10.3.15.0.PFJEUXM-14bc6a5788-9.0.zip
Micdu70 said:
OTA zip is here => https://bigota.d.miui.com/V10.3.15....PFJEUXM-V10.3.15.0.PFJEUXM-14bc6a5788-9.0.zip
Click to expand...
Click to collapse
Thanks,I was able to get it over ota but it doesn't come now has xiaomi removed it or something
I also get this message if I try to download the latest package. Is something wrong with my phone
It looks like the 10.3.15.0 update was pulled and 10.3.12.0 is now latest.
C0rn3j said:
It looks like the 10.3.15.0 update was pulled and 10.3.12.0 is now latest.
Click to expand...
Click to collapse
Ok thanks, but why though ??
My last update is 10.3.11.0 July security patch
C0rn3j said:
If you've flashed a non-stock recovery like TWRP, you can not use the OTA update feature. You need to flash the full ROM via TWRP.
So how to get around this when the updater is telling you there is an incremental update?
Simple, we tell the updater to download the full image instead, move the update from the original folder so MIUI won't attempt to upgrade from it on next reboot, boot into TWRP and flash the image there.
1. Settings -> About Phone -> System update -> three dots -> Download latest package
2. Get filename of the update:
3. You now have the filename of the update. I got miui_DAVINCIEEAGlobal_V10.3.15.0.PFJEUXM_b6738621e2_9.0.zip and will be using this name throughout the rest of this how-to, replace the examples accordingly based on what name you got.
4. (optional) Backup the latest ROM file to your PC:
5. Prevent MIUI from seeing the update file and trying to update from it on accident by moving the file a folder higher:
6. Power phone off
7. Boot into TWRP by holding PWR+VOL_UP during boot
8. Flash the ROM via TWRP
9. Flash Magisk if you use it, flashing the ROM deletes it.
10. Boot back into Android and remove the update file:
That's it!
You can also download the full ROM directly through miui.com, but keep in mind the website does not instantly update the link there after a ROM update is released.
https://en.miui.com/download-361.html#619 -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab.
Page best viewed in Firefox, clicking on the lock icon -> Arrow icon in the security tab -> Disable protection, since Xiaomi can't even set their website up properly.
In my case the ROM download through phone was corrupted and I had to edit the site URL from the filename I got to get a proper update file:
Click to expand...
Click to collapse
Redmi K20 Open Beta File Link?
Wrong thread.
Don't quote the OP, it clutters the thread.
For people who want the 10.3.15.0 update. I uploaded it to mega. Link is here:
https://mega.nz/#!pddQUaBL!s5En8LWaxWciUyNowU8_rYYMk2D48Dj8J7_PbJwv0kc
C0rn3j said:
...
https://en.miui.com/download-361.html#619 -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab.
Page best viewed in Firefox, clicking on the lock icon -> Arrow icon in the security tab -> Disable protection, since Xiaomi can't even set their website up properly.
...
Click to expand...
Click to collapse
The most accurate, updated and actual site for Mi 9t/K20 (davinci) firmware/rom - https://mirom.ezbox.idv.tw/en/phone/davinci/
10.3.15 ota is back online, just received it
Hey @C0rn3j
I am on stock 10.3.12.0 PFJEUXM and TWRP 4PDA 3.3.1.-2 fix and Magisk.
My questions:
1. Is it worth the upgrade to MIUI 11 as it is still Android 9
2. If I flash it through TWRP, did you loose any dual app settings? (as I lost dual apps while backing up the phone with TWRP and Titanium backup)
3. as you said I have to flash the Magisk again, did you choose the latest or the same as was installed on the phone before the upgrade?
Thanks in advance for reply
rastip said:
Hey @C0rn3j
I am on stock 10.3.12.0 PFJEUXM and TWRP 4PDA 3.3.1.-2 fix and Magisk.
My questions:
1. Is it worth the upgrade to MIUI 11 as it is still Android 9
2. If I flash it through TWRP, did you loose any dual app settings? (as I lost dual apps while backing up the phone with TWRP and Titanium backup)
3. as you said I have to flash the Magisk again, did you choose the latest or the same as was installed on the phone before the upgrade?
Thanks in advance for reply
Click to expand...
Click to collapse
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
C0rn3j said:
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
Click to expand...
Click to collapse
I have Nova Launcher, do you use default or as well external one?
Do you think Nova will stay untouched with this upgrade?
rastip said:
I have Nova Launcher, do you use default or as well external one?
Do you think Nova will stay untouched with this upgrade?
Click to expand...
Click to collapse
Nothing will happen to it
If the Magisk have to be flashed again, does it mean all the hide settings which were there before has to be set again or stay there from the old version? I have few apps in Magisk hide root, so just wondering how this will be affected with rom update
A second question:
I am on 10.3.12.0 not upgraded yet to 10.3.15.0.
Can I upgrade straight to V11.0.2.0 or first to 10.3.15.0 and then to V11?
---------- Post added at 05:27 PM ---------- Previous post was at 05:09 PM ----------
C0rn3j said:
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
Click to expand...
Click to collapse
While flashing did you untick Recovery in the TWRP as I believe the whole 2,2GB ZIP has recovery image and could be flashed and overwrite the TWRP?
Your guide not working, twrp failed to install the update "file corrupted".
I've downloaded the OTA package from "http://c.mi.com//miuidownload/detail?device=1700361" and twrp very happy to install this file, my Mi_9T at the latest update 11.
Unfortunately the archive downloaded through the Updater cannot be flashed as is through TWRP (message: file corrupted)
miui_RAPHAELEEAGlobal_V11.0.3.0.QFKEUXM_153f9511ae_10.0.zip
Hi all and sorry for my bad english in first!!
i live in italy and i've buyed(but still not recieved) one oneplus 9r from china whit oxygenos rom on board..
When it comes i want to root & debloat it, but i've some queustion cause in last year i've used only device with custom rom!.
first of all i wan't to root the phone, but preserve the possibility to update the OS with ota. if i understand right it's possible with magisk, can please someone tell me the correct step to make?
after root i vant to uninstall not necessary app for my utilization (facebook/instagram/netflix, red cable and oneplus account, google app, gdrive, google photo and most of BigG apps cause i'm using only gmail/yt/maps/ an store!).
the question is.... if i uninstall this app it will be re installed in future ota?
Thanks in advice!
Step1 : unlock bootloader, this will wipe the storage, then setup the device once again then enable usb debugging in developer options.
You can use this
Tool to make (tool all in one) your life easier : https://sourceforge.net/projects/tool-all-in-one/files/TOOL_ALL_IN_ONE_1.0.6.1.zip/download
you should select 8t as 9r is not supported officially
at the moment.
Step2: update the phone to latest version , right now it's 11.2.5.5
Step 3: download the same version of the oxygen is ota wether from xda, OnePlus official site , oxygen updater ( make sure it is full version).
Step4: on pc now extract only the payload.bin file in the input of the payload extracter ,
Now use the payload extracter ,
Run .exe and get boot.img .
payload_dumper_tool_by_ius.zip
drive.google.com
(MAKE SURE THE PHONE OS VERSION AND BOOT IMG VERSION IS SAME)
Step 5: install magisk manager on phone, now patch the boot.img that you extracted earlier. Copy this patched boot.img in platforms tool folder(I hope that u have installed the platform tools and adb & fastboot ).
Step 6: open terminal there in platform tools , use the tool all in one to boot your phone in fast boot mode,then flash patched boot.img using.
Fastboot devices
Fastboot flash boot_a patched.img
Fastboot flash boot_b patched.img
Bingo got rooted.
Step 7( optional) : now properly restart the phone by opening magisk , then install universal safety net fix, debloat modules in magisk.
You can use lucky patcher to debloat unnecessary things (which don't exist as it is oxygen os)
Now in future if your phone gets ota make sure you disable all magisk modules then download the full version of ota from oxygen updater & update it locally & do not restart.
go to magisk ,
flash magisk to inactive slot.
restart now,
REnable the modules. (Tip don't enable the lucky patcher module this will put you in bootloop)
enjoy the ota .
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
lvints said:
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
Click to expand...
Click to collapse
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
Way better than twrp just follow the steps u won't lose anything
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
So how did it go?
Rajveer chauhan said:
So how did it go?
Click to expand...
Click to collapse
I've already downloaded the files, but I haven't tested them yet.
I'll leave it for the weekend, if there's a problem I can solve it with peace of mind.
Sir have you tried changing the font of your 9R?
I've been looking on the magisk forums or some app but I haven't had success.
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Rajveer chauhan said:
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Click to expand...
Click to collapse
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Same version
lvints said:
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Click to expand...
Click to collapse
.
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
I flashed the img file and it booted to OrangeFox but I cannot press anything as the screen does not react. What is the solution for it?
It's is compatible with oos 11
Not with oos 12, any custom roms
Rajveer chauhan said:
It's is compatible with oos 11
Not with oos 12, any custom roms
Click to expand...
Click to collapse
I was on OOS 11. The 11.2.8.8.LE28DA.
Flashed it, boot up but cannot press anything. How can I go back to the original boot?
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Rajveer chauhan said:
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Click to expand...
Click to collapse
Thanks I got back to the original boot, but now how can I root with Magisk?
@Rajveer chauhan
Hello sr
Have you updated your 9r for A12 ? If yes, how did you do it? Would it be possible to go from A11 (11.2.8.8) to A12 (C.33)?