Just received the new update.
Thanks for notification, also just received it.
How to update with unlocked bootloader, TWRP and rooted with Magisk?
Download the hole update zip, flash it in TWRP and immediately Magisk afterwards?
bmwbasti said:
How to update with unlocked bootloader, TWRP and rooted with Magisk?
Download the hole update zip, flash it in TWRP and immediately Magisk afterwards?
Click to expand...
Click to collapse
Backup everything on your phone.
From what I understand; if you flash an OTA zip you'll end up on MIUI without root or TWRP unless, whilst still in TWRP after the zip has flashed, you immediately flash TWRP's image again along with Magisk without rebooting even once so that both persist.
That's if TWRP let's you flash whatever file ends up in /sdcard/downloaded_rom to begin with. Flashing MIUI zips - typically only supported by OrangeFox if I remember correctly. And if I'm right MIUI updater will download the full rom instead of an OTA if it detects a custom recovery.
I'd advise backing up everything before going ahead. If you want OTA your best bet might be to go on your PC and do "fastboot boot twrp.img" instead of "fastboot flash recovery twrp.img" then use the temporary TWRP to install the OTA zip and Magisk zip - that way it'll patch the stock bootloader.
I'd wait for someone with a little more knowledge though. I could be deathly wrong as I've only read this stuff and not updated MIUI with OTA before.
Hello Mi 9T Pro with Global ROM owners!
For someone who have installed V11.0.2.0QFKMIXM update and have ROOT => Can you please share these following two files "/vendor/lib/liboemcrypto.so" and "/vendor/lib64/liboemcrypto.so", thanks!
Micdu70 said:
Hello Mi 9T Pro with Global ROM owners!
For someone who have installed V11.0.2.0QFKMIXM update and have ROOT => Can you please share these following two files "/vendor/lib/liboemcrypto.so" and "/vendor/lib64/liboemcrypto.so", thanks!
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=10zBJh6Ud8cqMykHSfrupENSc8w8C2tOz
The one named with -1 is lib64 version
And one camera bug.
In Spanish (Spain) language selected camera FC in pro mode.
In Spanish (America) all is ok.
here's the download link
https://bigota.d.miui.com/V11.0.2.0.QFKMIXM/miui_RAPHAELGlobal_V11.0.2.0.QFKMIXM_6050442ee4_10.0.zip
r4yv3n said:
https://drive.google.com/folderview?id=10zBJh6Ud8cqMykHSfrupENSc8w8C2tOz
The one named with -1 is lib64 version
And one camera bug.
In Spanish (Spain) language selected camera FC in pro mode.
In Spanish (America) all is ok.
Click to expand...
Click to collapse
Thanks! Can you post a screen of Widevine informations with "DRM Info" app? Thx again.
Any OTA at this time or just full rom?
Found ota file, downloading now
https://bigota.d.miui.com/V11.0.2.0...QFKMIXM-V11.0.2.0.QFKMIXM-a84af52957-10.0.zip
Micdu70 said:
Thanks! Can you post a screen of Widevine informations with "DRM Info" app? Thx again.
Click to expand...
Click to collapse
https://drive.google.com/file/d/10IJ_zGk77vxgeTpbOuR0GY9lhekbivSz/view?usp=drivesdk
?
This is from 11.0.1
I had to return back , stuck in fastboot ?
how much sot here?
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Giangvo200837 said:
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Click to expand...
Click to collapse
I think it's been withdrawn. It never officially came out of beta. They're still trying to fix a few minor Q bugs like battery drain and camera app issues; on top of that the development for MIXM in particular has been a bit behind - probably due to Chinese new year and/or Coronavirus. Though it's possible the MIXM (or Global) branch is compiled outside China; truth be told I have no idea why the Q update has been handled so badly for this particular device channel. The Mi9T Pro's development has been seemingly 'paused' as of late for Global users.
Reminds me a lot of my Redmi 5 Plus. Development was paused for much of the product's lifespan and they never fixed certain bugs on the device; just merged MIUI branch changes. Hopefully the same doesn't happen to the Mi9T Pro. It is a flagship-esque device and barely six months old (August 2019).
?Miui Global Stable Mi V11.0.2
? Android 10 | Miui 11
? 2/15/2020
?Changelog:
Deodex
Add Call, Contact and SMS MIUI
Center Clock
And You
For the Install Process MANDATORY Using Custom Recovery DX By MiRoom
If you do not use Custom Recovery DX By MiRoom, it will definitely enter Fastboot mode
? For the installation process, please see / download the video below. ?
? Download Video / Streaming: here
? Download Rom: here ?
Download vbmeta.img: here | Mirror
Download Custom Recovery DX By MiRoom Install via Fastboot mode : here
By Redmi K20 Pro Indonesia
Giangvo200837 said:
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Click to expand...
Click to collapse
I had to download the OTA zip someone sent here and ended up manually updating. Tap a few times on the 11 in the updater until a toast message pops up saying that you enabled additional options and then tap on 3 dots and select Choose update package and browse to the zip you downloaded and select it.
Honestly I have like since forever used custom ROMs on my phones and this time I wanted to have the "stock experience", but if they keep delaying updates like this I'll just switch to xiaomi.eu weekly builds.
Since 31st of January Xiaomi suspended temporarily all updates due to the Corona virus outbreak.
How do i flash ota file manually on non rooted phone?
1. Be sure you have the correct OTA file
2. Place the OTA file in a folder of the internal storage named "downloaded_rom".
3. Go to settings/about the phone/systemupdate and tick the 3 dots on the right top
4. Then tick "choose update package" with this text or similar and go to the folder where you copied the Ota file and choose that file
Then let the Ota file update do it's work and after reboot it is done.
Snah001 said:
1. Be sure you have the correct OTA file
2. Place the OTA file in a folder of the internal storage named "downloaded_rom".
3. Go to settings/about the phone/systemupdate and tick the 3 dots on the right top
4. Then tick "choose update package" with this text or similar and go to the folder where you copied the Ota file and choose that file
Then let the Ota file update do it's work and after reboot it is done.
Click to expand...
Click to collapse
The option "Choose update package" doesn't show up unless you tap the 11 in the Updater a few times, because manually installing a .zip is an advanced (duh) option.
Was assuming that people here would know.
Related
Issues with Rom Flashing... "Install update.zip signature verification failed"
Hello
I am new in the World of Xiaomi and MIUI
I bought a Redmi Note 2 and it had the Oppomart MIUI-Version ist 66.77.33.00 (LHMCNCH)I Stable on it. I am a german user.
I found out that the Rom was not official and it contained useless apps and I couldnt use root either. So I wanted to flash different Roms. After some tries and researches I could flash an inofficial german Rom. But with that I couldnt use Xposed Installer so I wanted an original Rom. I flashed miui_HMNote2_5.10.15_8097474ec2_5.0. But that seems to be completely for chinese users. You can choose english language but there is no google account and no google apps. No play store, nothing. just chinese browsers, chinese apps and the MI Store completely in, guess what, chinese.
And now I cannot flash any Rom. I tried to go back to other Roms, like the german miuidecuro_REDMINOTE2_5.9.24_5.0 that i used before but nothing worked. I keep getting an error telling me "Install update.zip signature verification failed" I wiped all data, made a factory reset but nothing worked. I would even be happy to have the oppomart version back. It was annoying but had at least the playstore
Please help me
If you have any rom > 5.10.15 you can't flash previously roms.
Install TWRP or an old fastboot rom
~ Xiaomi Redmi Note 2 Prime ~
SkiFire13 said:
If you have any rom > 5.10.15 you can't flash previously roms.
Install TWRP or an old fastboot rom
~ Xiaomi Redmi Note 2 Prime ~
Click to expand...
Click to collapse
Thanks. I never used TWRP. Do I have to download and install it on the phone as an apk file or on the Computer? Sorry I am new and when I google these things I only get more confused. What is the difference between the flashtools MiPhone2015731 and TWRP?
Is it possible to use Stock Android on the note 2 instead of MIUI?
gasperoni said:
Thanks. I never used TWRP. Do I have to download and install it on the phone as an apk file or on the Computer? Sorry I am new and when I google these things I only get more confused. What is the difference between the flashtools MiPhone2015731 and TWRP?
Is it possible to use Stock Android on the note 2 instead of MIUI?
Click to expand...
Click to collapse
Xioami has started to use licence or something for their roms. So multilanguage rom cant acceptable anymore on orginal system. Twrp is recovery mod for Android devices. Its very simple to install and use. And no you cant. Because nobody doesnt make any stable aosp or something rom. We are waiting.
mee to.
put rom file into internal sotrage, then update ok.
Visit TWRP by going to install and then there must be a hack because you have to do away
Ok. Is there a TWRP App for all phones or does it have to be for Redmi Note 2?
I download the apk, put it on the SD Card and install it from there, is that right? Can I flash the hermes rom from there for Europe?
I never did that so I really have no clue how to do that. The phone is nearly useless right now. I gotta fix this somehow. Thanks for everyone who helps
gasperoni said:
Ok. Is there a TWRP App for all phones or does it have to be for Redmi Note 2?
I download the apk, put it on the SD Card and install it from there, is that right? Can I flash the hermes rom from there for Europe?
I never did that so I really have no clue how to do that. The phone is nearly useless right now. I gotta fix this somehow. Thanks for everyone who helps
Click to expand...
Click to collapse
Hi.
Cant you install a rooted stock rom with stock recovery? Then you need the right TWRP for our phone.
Heres one place where you can find it. http://www.mediafire.com/download/6sf0fsm8vx2o948/twrp287.zip
First try flash it with Mi recovery.
If not you need to download an app from playstore "flashify" with it you flash TWRP. You need a img file so you may have to unzip the recovery.zip
I have flashed Xiaomi.EU 5.10.8 Weekly which is rock stable. You should flash Chainfires last Supersu and install Google Now Launcher if you like something more "stock" and have a appdrawer..
Thanks
Knievel
...
Ok thanks I will try that. A few hours ago I managed to flash the xiaomi.eu european version of the 5.10.15. Can I stll flash Roms with that?
Another problem is that I cannot use Xposed Installer and google now launcher. Is that normal?
gasperoni said:
Ok thanks I will try that. A few hours ago I managed to flash the xiaomi.eu european version of the 5.10.15. Can I stll flash Roms with that?
Another problem is that I cannot use Xposed Installer and google now launcher. Is that normal?
Click to expand...
Click to collapse
ok good.
Then i would go to play store an download Flashify . Unzip the TWRP zip, and flash the recovery.img with flashify.
You can also backup kernel and recovery with this app. Its very easy and straight forward.
When you got flashed TWRP , use a file explorer with root privileges and delete the file "recovery-from-boot.bak" placed in System folder. If not you may loose TWRP after reboot.
TWRP is vital so you can make an nandroid backup of everything if/when something goes wrong. And of course flash everything else.
About Google Now Launcher, flash last Supersu zip from Chainfire in TWRP. Then you get permission to change default launcher.
I dont use Xposed for now so you have to Google it.
Only thing i miss is "Reboot to recovery" option, but a lot of apps can do this.
Thanks
Knievel
,,,
Ok thanks, I downloaded it. What exactly is the difference between Boot Image and Recovery Image?
Is there an AOSP Rom you can recommend? I really want to get rid of MIUI.
gasperoni said:
Ok thanks, I downloaded it. What exactly is the difference between Boot Image and Recovery Image?
Is there an AOSP Rom you can recommend? I really want to get rid of MIUI.
Click to expand...
Click to collapse
Hi.
Boot image here is kernel.
Im no big fan of Miui myself , but with the right launcher its quite ok.
I have tried a couple of the aosp roms here on Xda . Find them a little buggy, and battery life isnt very good either compared to Miui.
If/when Xiaomi release all needed sources, i think we will get good and stable Aosp and CM roms to flash too.
Thanks
Knievel
...
Yes I don't like it either. But there are too many bugs in the Custom Roms. I just want a bug free Rom where I can use xposed
Hi,
I have the redmi note 2 with 5.10.22 and I can't flash the TWRP, I tried everything but nothing helps.
Any ideas?
Thanks.
liorkd said:
Hi,
I have the redmi note 2 with 5.10.22 and I can't flash the TWRP, I tried everything but nothing helps.
Any ideas?
Thanks.
Click to expand...
Click to collapse
Just unzip the twrp zip. You can do it with a Root Explorer. Then you get a img file.
This img file you can flash with an app called Flazhify ( Google play Store, its free ).
Have you tried this?
Thanks
Knievel
You need to flash TWRP with fastboot.
Poppeye0 said:
You need to flash TWRP with fastboot.
Click to expand...
Click to collapse
I did it and flashed the xiaomi.eu 5.11.1 Rom now. Does someone know how to update that kind of Roms or do I have to download the whole Rom, save my data and flash it every week?
SkiFire13 said:
If you have any rom > 5.10.15 you can't flash previously roms.
Install TWRP or an old fastboot rom
~ Xiaomi Redmi Note 2 Prime ~
Click to expand...
Click to collapse
Hi,
Can you please share a link for old fastboot rom for redmi note 2?
Thanks.
I finally flashed MIUI 6 via FASTBOOT.
After that I copy the international version from here: http://xiaomi.eu/community/threads/5-12-3-4.29098/
The "Update.zip Signature Verification Failed" problem was fixed - it did not check the signature.
Thank you all
Hi,
My phone came with 7.00.66 and it's not rooted. I tried to flash xiaomi eu roms via updater app, but it failed several times.
Also i tried to install twrp via updater app, but it also failed. Can you help me please. :crying:
I was thinking to do this:
1) flash official developer rom via updater app, and hopefully it won't show error, because it is official rom , and it is rooted (?)
2) flash twrp using this method
HOW TO FLASH TWRP RECOVERY VIA FLASHIFY
Warning: Redmi note 2 only (other phone need specific image)
Me and this forum are not responsable for any damage. Do at your own risk
1. download flashify app from playstore and give root acces
2. download img of twrp for redmi 2 note and put in your sd card (I prefer sdext root folder)
3. Open flashify, select "recovery image", find the img file you've downloaded
4. confirm flash, wait until it's done
5. you're now ready to reboot in twrp pressing "reboot now" from flashify.
you can also turn off your phone, press power and volume up and you'll be in twrp.
3) install xiaomi eu rom with twrp
Is this correct way?
10.2.22.0
http://bigota.d.miui.com/V10.2.22.0...AGlobal_V10.2.22.0.PFAEUXM_745a374eee_9.0.zip
10.2.17.0
https://bigota.d.miui.com/V10.2.17....AGlobal_V10.2.17.0.PFAEUXM_53263ccd41_9.0.zip
https://bigota.d.miui.com/V10.2.17....AEUXM_20190327.0000.00_9.0_eea_b2470d1b08.tgz
New links will be posted here.
Only ota link for 10.2.22.0?? Thank you
The power of the Mi 9 be with you
Hello,
As seen in my post, my rooted 10.2.22 will only download "corrupted zips" OTA (see post here)
How did you get the URL? I cannot "explore" bigota.d.miui.com for the link when next version arrives...
Thanks!
RedWave31 said:
Hello,
As seen in my post, my rooted 10.2.22 will only download "corrupted zips" OTA (see post here)
How did you get the URL? I cannot "explore" bigota.d.miui.com for the link when next version arrives...
Thanks!
Click to expand...
Click to collapse
Have you flashed Magisk via TWRP or patching the boot image?
Because I want to keep OTA Update but patching and flashing the boot.img of the 10.2.22 above, nothing happens (the patched image is just 40MB while the original one is 130)
ponypezza said:
Have you flashed Magisk via TWRP or patching the boot image?
Because I want to keep OTA Update but patching and flashing the boot.img of the 10.2.22 above, nothing happens (the patched image is just 40MB while the original one is 130)
Click to expand...
Click to collapse
I've only patched the boot image, and it's 40mb as well, but it's OK, everything is working normally. I believe that 90mb of that boot image is just garbage or bootloader protection.
RedWave31 said:
I've only patched the boot image, and it's 40mb as well, but it's OK, everything is working normally. I believe that 90mb of that boot image is just garbage or bootloader protection.
Click to expand...
Click to collapse
So there's something wrong with the way I flash the patched boot image, because after reboot when I open Magisk it says that it's not installed.
This is my first phone with fastboot (had Samsung previously) but everything went smoothly.. I will retry tomorrow.
About the corrupted zip, I also have this issue. Today I updated to 10.2.22 AND unlocked bootloader, so I don't know which one of the 2 is causing it. Maybe bad zip in xiaomi servers, maybe xiaomi not giving right rom to who has bootloader unlocked.
V10.2.24.0
exists in version fastboot?
I can't install this update with my root phone
anemal000 said:
I can't install this update with my root phone
Click to expand...
Click to collapse
Solved!!!
i installed from twrp the 2.13gb version the 517mb one did not install it gave error 7
anemal000 said:
Solved!!!
i installed from twrp the 2.13gb version the 517mb one did not install it gave error 7
Click to expand...
Click to collapse
did you flash V10.2.24.0 ? cheers
Latest 10.2.24 EEA changelog
System
April 2019 Security Patch
Camera
Fix : Photo preview for individual shots weren't displayed in some cases
Settings
Fix : Screen brightness was lowered in dark mode whenever audio volume was adjusted
Fix : Fingerprint scanner couldnt be used when talkback was on
Fix : Clock flashed when fingerprint was used
Fix : Fingerprint unlock issues
The big, big fat lie and complete Xiaomi screwup
Fix : Notifications didn't appear in the notification shade if fingerprint unlock was used
>> NOPE, notifications were there, it's the ICONS that are missing you #£%*!?# developers
Fingerprint unlock is much faster
Else? You still have to use NotchTest. Just buy the pro version, and don't hesitate to transform it to a system app using titaniumbackup to avoid icons being wiped when screen off.
Redmi K20 Pro
[Raphael]
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are NOT risking voiding your warranty! I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
Drivers
Mi Flash
Minimal ADB and Fastboot
Unlock Bootloader
Unlock Bootloader
Unlock here
*AMD Ryzen System has a issues in Unlocking Bootloader try another PC (Intel System)
TWRP Recovery
TWRP
TWRP auto install
Unofficial TWRP 3.3.1 Recovery - RU and Eng
Unofficial TWRP 3.3.1 Recovery @nikk3d - Multilingual
Unofficial Pitch Black Recovery @nikk3d
OrangeFox Recovery Official R10
TWRP Recovery for Android Q
/ Installation
Root
Magisk Stable
Magisk Manager
Firmwares
China MIUI 11
9.9.9
9.9.6-9.9.9
9.10.8
11.0.2.0
11.0.3.0
11.0.1.0.
11.0.4.0
11.0.5.0
9.12.27
Global Stable
10.3.3.0 Fastboot
10.3.3.0 Recovery
Global Beta
China
V10.3.6.0.PFKCNXM Fastboot
V10.3.7.0.PFKCNXM Recovery
V10.3.7.0PFKCNXM Fastboot
V10.3.8.0.PFKCNXM Recovery
V10.3.8.0PFKCNXM Fastboot
V10.3.9.0PFKCNXM Recovery
V10.3.10.0PFKCNXM Recovery
V10.3.110.PFKCNXM Recovery
V10.3.12.0PFKCNXM Recovery
V10.3.14.0PFKCNXM Recovery
V10.3.16.0PFKCNXM Recovery
V10.4.4.0 RecoveryQFKCNXM
V10.4.4.6 RecoveryQFKCNXM
OTA
10.3.10.0 to 10.3.11.0
10.3.8.0 to 10.3.10.0
10.3.7.0 to 10.3.8.0
10.3.9.0 to 10.3.10.0
Beta
9.6.11
9.6.20
9.7.4
9.8.12
9.8.21
9.9.3
India
Stable Firmwares
10.3.3.0 Fastboot
10.3.5.0
10.4.7.0 Android Q
10.4.8.0 Android Q
Beta
Global
EU
9.6.13
9.6.20
10.3.9.0
10.3.10.0
10.3.11.0
9.6.27
[URL="https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv10/xiaomi.eu_multi_HMK20ProMI9TPro_V10.3.12.0.PFKCNXM_v10-9.zip/download"]10.3.12.0[/URL]
9.7.4
10.3.14.0
10.3.15.0
9.7.11
9.7.18
9.7.19
10.3.16
9.7.27
9.8.1
EU Android Q 9.8.8
9.8.12
9.8.15
9.8.22
10.3.17
EU Android Q 9.8.29
EU Android Q 10.4.4.0
9.9.3
9.9.6
10.3.30
EU Android Q 10.4.6.0
MIUI 11 9.9.26
MIUI 11 9.10.10
MIUI 11 11.0.2.0
MIUI 11 9.10.24
MIUI 11 9.11.7
MIUI 11 9.11.14
MIUI 11 9.11.21
MIUI 11 9.11.22
MIUI 11 9.11.28
MIUI 11 9.12.5
MIUI 11 9.12.12
MIUI 11 9.12.27
MIUI 11 20.1.16
Global EEA
10.3.1.0 PFKEUXM Fastboot
10.3.1.0 PFKEUXM Recovery
10.3.3.0 Recovery
Mi-Room
9.6.20
9.6.27
9.7.4
9.8.1
9.8.22 Android Q
9.8.29 Android Q
9.9.6 Android Q
MiuiMix
10.3.17.0
Mi-Italia
10.3.16.0
MIUI MS
9.7.18.9
9.7.25.9
9.8.1
Android Q 9.8.8
*Back up everything and Flash via TWRP Recovery
*For Raphael only (China ROM)
9.8.8 Q
9.8.8-9.8.29 Q
9.8.29 Q
MIUI 11 9.9.24
MIUI 11 9.9.25
[URL="https://hugeota.d.miui.com/9.9.26/miui_RAPHAEL_9.9.26_c74ffeeec0_10.0.zip"]MIUI 11 9.9.26[/URL]
Revolution OS
9.9.7
Google service error flash this
9.9.21 Q
9.9.21 Pie
Android Q [Unlocked Bootloader]
Beta 1
TWRP RESET Password
If you forget the password go to TWRP Recovery and Flash.
Removing Bloatwares in Locked/Unlocked Bootloader
-Enable Developer Options and click USB debugging
1.Open and click run as administrator XiaomiADBfastboottools.exe
2.Click Debloater
3.Check your phone (Allow)
4.Select the system apps that want you to delete
5. Wait for the process....
6.After finished.. click the Reboot into System
The Ultimate Guide for Redmi K20 Pro [Raphael]
Fake Global ROM to Chinese ROM to Global ROM/EU/Mi-Room
ATTENTION!*All that you will do with the phone is guided by this guide - it lies in the area of your personal responsibility only.*Neither I nor other members of the forum, not the administration of the forum are responsible.*
If you do not understand something and the written guide below - contact the LS to knowledgeable colleagues, as I did!*Hide created for the Chinese version of the phone K20 Pro - Global ROM.*(for India it will not work!)*
I will explain in stages what to do, giving my comments in my simple language: what?*What for?*Why?*Don't be scared that there are a lot of points - I tried to chew everything up.
So what do we have?*
• K20 Pro - Global ROM (Installed by the Chinese firmware, with no updates, poor translation, with not working Gpay)*
• You must create an official mi account and link the device to it.*
What do we need?:*
• Installation Recovery - Orange fox (Advanced replacement of standard Recovery, and installation of any firmware) - Wildly necessary thing!*
• Installing the firmware MI Room 9.7.4*
• Proper operation of the GPAY through the patch*
Introduction)*
So, you got a phone from China.*What do you have in your hands?*This is the device on which the Chinese put the left firmware and at the same time did not unlock the bootloader officially - which is not compatible with the transition to any, really good firmware.*
Before we begin - the most important thing!*(further quote from the forum):
ATTENTION!*CHINESE VERSION REDMI K20 PRO CAN BE BLOCKED ONLY ON THE CHINESE FIRMWARE!*Before carrying out any operation, read the materials that are referenced in the header themes, check Search by topic, and if not found the answer to your question, or do not understand something, ask more experienced users.*
Do you understand?*Now read again 20 and memorize this phrase!*
INSTALLATION OF THE CHINESE OFFICIAL FIRMWARE AND LOCKER DOWNLOAD AND UNLOCK!*
What for?*Your phone needs to be unlocked officially.*To do this, you must put the official firmware and file for unlocking officially.*
What is needed (all in the header):*
•Firmware file - *10.3.6.0 China Fastboot
• Program MiFlash 2018.11.15.0 (we need administrator rights) - a program to install Fastboot-type firmware and lock the phone loader.*
• Driver for computer - ADB Driver Lite
• Program - miflash_unlock*
• Phone*
• Type C Cable*
1) Download all of the above and check that everything downloaded*in the right “size”.*
2) Install MiFlash 2018.11.15.0*on the C drive:
3) Go to MiFlash 2018.11.15.0 - it will offer to install the drivers.*Do not hesitate to install everything - exit the program!*
4) Install ADB Driver Lite (by default it is set by MiFlash but will not be worse if you additionally install the latest driver from the header)
5) - CORRECTLY unpacking the firmware 10.3.6.0 China Fastboot!*By default, you download it with the extension .tgz!*The file you downloaded will be called raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn_ed862b8182.tgz*
- Unzip this .tgz file and get a file with the .tar extension.*The full name will be - raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn_ed862b8182.tar.*
- Unzip this .tar file and get a folder named raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn.*Here we will work with this folder in the future!*You need to move it to drive C:!*It is important!*
6) Switch the phone to debug mode via USB.*(I think there will be no problems here)
7) Transfer the phone to FASTBOOT mode.*Turn off the device.*Clamp the power button + volume rocker down.*If there is a hare and the inscription Fastboot then everything is OK!*
8) In MiFlash, press the Select button, specify the path to the folder with the firmware raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn and click ok.*
9) Something like this should appear in the line:*С: \ raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn
10) Put a clean all and lock checkbox at the bottom.*This parameter means that the*
phone will be erased while all data is erased, and the bootloader is locked.*(only for the Chinese version of the phone)*
11) We connect the phone (in fastboot mode) to the computer through the official drawstring.*And without any USB hubs and adapters!*
12) Press the Refresh button.
13) If everything is correct then a line should appear with the id of the phone and the status ready.*
14) So, the phone is recognized.*The path to the folder with the firmware is specified.*Galka clean all and lock costs.*Press the flash button.*
15) The phone starts to sew!*Do not unplug the power cord!*don't touch anything at all.*Do not breathe!*The firmware time is about 10 minutes.*
16) At the end of the firmware, complete will appear in the line with the execution status and the phone will restart (up to 10 minutes) to the initial welcome screen.*Disconnect the phone.*
17) Hooray you flashed to the Chinese firmware and officially blocked the phone.*Let's start the activation and application for unlocking.
18) The first thing that will meet you is the screen in Chinese.*With two button in Chinese.*Push first you are asked to enter something ... This is the password from your mi account.*We enter.*
19) Tap on the second button connect to the Wi-Fi or skip.*
20) Choose the English language.*Customize your phone.*
21) Transfer the phone to the developer mode.*In the settings of the developer, we go into the unlock status (I don’t remember exactly how to speak English).*We see the closed lock, below we see the button.*Click on it!*And we will register the phone for the official unlock (Wi-Fi should be turned off and mobile networks on).*
22) Next, go to the mi account and check that your mobile phone is tied.*Are you convinced?*I recommend to look at the corresponding topic on the forum with the video.
23) On the PC, run miflash_unlock.*Log in to your mi account.*The phone is transferred to the Fastboot mode (point 7) and connected to the computer.*Press the unlock button.*At the same time, we confirm a bunch of times that we are sure that we want to do this.*All your data will be destroyed.*
24) The PC starts to unlock and at some point gives a message that the unlock failed and should be tried again after 168 hours.
25) Congratulations, you activated the counter before unlocking.*You walk with the phone 7 days on the Chinese firmware.*Is it hard?*Well no.*You can take the apk with Google services from the page on this forum and install what you need.*
26) It's been 168 hours, and you're ready to unlock.*
27) But before you do ... Update your phone over the air to the latest version - nowhere on the forum it is not written (I have not seen) but this is important.*I will explain later why!*Remember this item.*
28) Start and repeat paragraph 23. And lo and behold!*The unlock process has begun.*And at the end there is an inscription that the phone is unlocked.
29) Now, when you boot your phone, you should see Unlocked.*Check out what it is!*
30) Configure the phone again.*Turn on USB debugging mode.*
31) Further, in my opinion the most dreary, because the forum has a lot of conflicting information.*I will tell you how I did.*But before continuing, I can say that since you have already received unlock, it is almost impossible to turn the phone around (but everything is possible)*
32) So, download three things:*
- TWRP-3.3.1*
- OrangeFox R10.0 Recovery*
- MI Room 9.7.4 firmware
33) Everything that you downloaded in the zip archives.
34) Unzip -TWRP-3.3.1 to drive C. Transfer the phone to Fastboot (item 7) and connect it to the computer.*We find in the unpacked folder TWRP file with the extension .bat.*in different versions of TWRP called differently.*I called Flash_twrp.bat*
35) And before*proceeding, I’ll*remind you about clause 27).*The fact is that I could not install TWRP without updating over the air.*Therefore, you must first install the update.*And on the firmware 10.3.6.0 China Fastboot.*- It will not work to put TWRP and you will have to do a lot again*
36) Start and get the menu in my Russian language, where we select the auto installation (1).*After a couple of seconds, your phone should reboot into TWRP recovery.*There we choose the language if asked.*
37) And
so, we are in the main menu of TWRP.*We need to take a series of actions*(in a strict order)
38) Go to the Wipe point and select FORMAT DATA -> svayp -> type yes.*The formatting process takes a couple of seconds.*What does this item do in my understanding?*He decrypts the data on the phone, which is necessary to throw on the phone firmware and Orange fox.*
39) Exit the main menu by clicking REBOOT Recovery.*The phone should reboot into the main menu again.*And on the PC, it should be defined as a phone with Internal storage.*Go to the Internal storage on the PC.*See the TWRP folder?*If yes, then everything is OK!*
40) On the phone, go to the Wipe point and select Advanced wipe -> svayp -> select all the items*except System and OTG* svayp
41) Exit the main menu, press REBOOT -> Recovery.*The phone should reboot into the main menu again.*
42) On the PC, go to the phone -> Internal storage and next to the TWRP folder, throw the downloaded OrangeFox R10.0 recovery directly into the zip archive.*
43) On the phone, go to the Install item and see our Orange Fox.*Choose it.*AND THERE IS THE MOST IMPORTANT!*He will ask you to install two checkboxes before installation: one of them Verification of the ZIP signature (in English) and so this checkbox must be removed, otherwise the error will be.*We start the installation.*Your phone must reboot into Orange FOX.*
44) So what is Orange Fox?*This same TWRP is simply much more convenient and stable.*
45) On the PC, go to the phone -> Internal storage and next to the TWRP folder, throw the downloaded firmware to the worlds.
46) In Orange Fox, select this firmware, also remove the checkmark ZIP signature check (in English).*And start the process of installing the firmware.*
47) Hooray you got the best, in my opinion, firmware)*
48) Disconnect from the computer.*Customize your phone.*
49) Installing a patch for Gpay is easy.*Straight from the phone, download the patch file.*
50) Put the phone in orange fox recovery mode.*Turn off the device.*We press the power button + volume rocker UP (not to be confused with the power button + volume rocker DOWN for Fastboot boot mode)*
51) In the Downloads folder we see our patch and install (also remove the Check Signature ZIP checkbox).*
52) Congratulations!
Thanks to
helpbabay911
Mysttorent
Viper4Android + DDPlus and Google Pay Fix for Redmi K20 Pro
Google Pay Fix
•TWRP Recovery from our site
•Do not install the patch simultaneously with other patches or firmware.
•Install the patch only on top of the installed firmware. If you have made a date wipe, first launch the firmware, perform the initial setup, and then install the patch itself.
•Before installing the patch, make sure that the Data section is mounted (usually it is mounted by default on all TWRPs).
Download
*Credits to Mi-Room RU
Viper4android + DDPlus =
1.Install Audio Modification Library (AML) and Audio Compatible Patch (ACP) via Magisk Repo and reboot.
2.Install DDPlus via Magisk and reboot.
3.Install Viper4Android via Magisk and reboot. (materialized).
4.selinux changer (choose permissive if not working in enforcing).
5.Profiles
Profiles with IRS 1
Profiles with IRS 2
Profiles
DDPlus
AML (You can download from Magisk Repo)
ACP (You can download from Magisk Repo)
Viper4android (You can download from Magisk Repo)
Reserved 3
Reserved 4
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Thank you for your amazing work!
khoaitaychienvn said:
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Click to expand...
Click to collapse
Yes, you can flash it with TWRP. That's the multilanguage rom with Google Play preinstalled and without the bloatware of the Chinese version.
madsponge26 said:
Reserved 1
Click to expand...
Click to collapse
Hi. I really appreciate the post.. just one question though? What are the firmwares for? Coz if I am not mistaken, to be able to install twrp and root, all I need is to unlock the bootloader then flash the twrp.img. Please enlighten me.. thank you..
---------- Post added at 07:35 PM ---------- Previous post was at 07:33 PM ----------
Also, will bootloader unlocking and installing twrp wipe everything I have in my internal storage?
melmarPH said:
Hi. I really appreciate the post.. just one question though? What are the firmwares for? Coz if I am not mistaken, to be able to install twrp and root, all I need is to unlock the bootloader then flash the twrp.img. Please enlighten me.. thank you..
---------- Post added at 07:35 PM ---------- Previous post was at 07:33 PM ----------
Also, will bootloader unlocking and installing twrp wipe everything I have in my internal storage?
Click to expand...
Click to collapse
The firmwares are the stock roms, should you need to recover the phone. The fastboot ROM is the absolute failsafe and flashes almost all partitions. This can be updated using scripts within the package or using the Mi flash tool. The recovery roms will just update the system partition and flashed using recovery, either stock or TWRP or any other recovery.
Installing TWRP won't touch anything on the phone except the recovery partition. However bootloader unlocking will perform a factory reset. In theory the internal storage should remain untouched, but best to back it up.
madsponge26 said:
Reserved 4
Click to expand...
Click to collapse
Hi, Please update the thread, here's a fastboot link for Firmware 10.3.7.0
https://bigota.d.miui.com/V10.3.7.0...FKCNXM_20190528.0000.00_9.0_cn_8b5bfd6d56.tgz
and 10.3.8.0
http://bigota.d.miui.com/V10.3.8.0....FKCNXM_20190601.0000.00_9.0_cn_beb2b2a432.tgz
Robbo.5000 said:
The firmwares are the stock roms, should you need to recover the phone. The fastboot ROM is the absolute failsafe and flashes almost all partitions. This can be updated using scripts within the package or using the Mi flash tool. The recovery roms will just update the system partition and flashed using recovery, either stock or TWRP or any other recovery.
Installing TWRP won't touch anything on the phone except the recovery partition. However bootloader unlocking will perform a factory reset. In theory the internal storage should remain untouched, but best to back it up.
Click to expand...
Click to collapse
That's crystal clear. Thank you so much..
khoaitaychienvn said:
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Click to expand...
Click to collapse
I would not suggest to flash it right now as a daily driver, here is a review for xiaomi eu rom.
https://www.youtube.com/watch?v=mTi8nYMJRx4
sorry can i ask 9.6.11 is global beta rom or china rom?
What is the wait time to unlock the bootloader?
bretzelpopo said:
What is the wait time to unlock the bootloader?
Click to expand...
Click to collapse
7 days
knight06 said:
sorry can i ask 9.6.11 is global beta rom or china rom?
Click to expand...
Click to collapse
I was with the same doubt. is that rom really a Beta version of the global rom?
knight06 said:
sorry can i ask 9.6.11 is global beta rom or china rom?
Click to expand...
Click to collapse
rafa_martineiz said:
I was with the same doubt. is that rom really a Beta version of the global rom?
Click to expand...
Click to collapse
9.6.11 is China Beta
9.6.13 is EU version which is from Xiaomi.EU . Unofficial global version based on China ROM that removes all chinese bloat and adds more languages.
New Links!
10.3.6.0 for Recovery
http://bigota.d.miui.com/V10.3.6.0.PFKCNXM/miui_RAPHAEL_V10.3.6.0.PFKCNXM_e679907a50_9.0.zip
10.3.9.0 for Recovery
http://bigota.d.miui.com/V10.3.9.0.PFKCNXM/miui_RAPHAEL_V10.3.9.0.PFKCNXM_bd915c4259_9.0.zip
MIUI 10 10.3.9.0 Android Pie 9.0 is up!
Changelog
MIUI 10 EU 10.3.9.0 Android Pie 9.0 is up!
Changelog
If you've flashed a non-stock recovery like TWRP*, you can not use the OTA update feature. You need to flash the full ROM via TWRP.
* TWRP is now officially supported, make sure you flash that version if you're using an older, unofficial TWRP.
1. Obtain the ROM you want to install. Make sure the download is from miui.com if you want stock
Official site -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab. The website does not update links immediately after a ROM update is released, so you may have to do a bit of digging if you want a very recent update.
You can also check ROM links on third party sites like ezbox.idv.tw, again, make sure the actual download links are from miui.com and not somewhere else.
Latest EEA ROM(Android 10) as of 2020-10-24 -
V12.0.3.0.QFJEUXM
Nightly official LineageOS builds
2. Get into TWRP
Either run 'adb reboot recovery'
Or power phone off and boot into TWRP by holding PWR+VOL_UP during boot
3. Upload the ROM to the phone
Code:
adb push ~/Downloads/[B]miui_DAVINCIEEAGlobal_V12.0.3.0.QFJEUXM_12b99693bc_10.0.zip[/B] /sdcard/
4. Flash the ROM via TWRP
5. Flash Magisk if you use it, because flashing the ROM deletes it.
6. Remove the update file:
Code:
adb shell rm /sdcard/[B]miui_DAVINCIEEAGlobal_V12.0.3.0.QFJEUXM_12b99693bc_10.0.zip[/B]
That's it! Reboot your phone into your new ROM!
Also check out my debloat list and my detailed phone settings.
Additional note - formatting /system will brick your phone and you'll have to recover using a fastboot ROM.
Please can I get the 10.3.15 ota zip for the official recovery I cant get the update and my phone is now on 10.3.12 it always say no update available even though I have done the update before and returned to 10.3.12 but it does show it to me again and also my otg doesn't work . please help me
Benfatica said:
Please can I get the 10.3.15 ota zip for the official recovery I cant get the update and my phone is now on 10.3.12 it always say no update available even though I have done the update before and returned to 10.3.12 but it does show it to me again and also my otg doesn't work . please help me
Click to expand...
Click to collapse
OTA zip is here => https://bigota.d.miui.com/V10.3.15....PFJEUXM-V10.3.15.0.PFJEUXM-14bc6a5788-9.0.zip
Micdu70 said:
OTA zip is here => https://bigota.d.miui.com/V10.3.15....PFJEUXM-V10.3.15.0.PFJEUXM-14bc6a5788-9.0.zip
Click to expand...
Click to collapse
Thanks,I was able to get it over ota but it doesn't come now has xiaomi removed it or something
I also get this message if I try to download the latest package. Is something wrong with my phone
It looks like the 10.3.15.0 update was pulled and 10.3.12.0 is now latest.
C0rn3j said:
It looks like the 10.3.15.0 update was pulled and 10.3.12.0 is now latest.
Click to expand...
Click to collapse
Ok thanks, but why though ??
My last update is 10.3.11.0 July security patch
C0rn3j said:
If you've flashed a non-stock recovery like TWRP, you can not use the OTA update feature. You need to flash the full ROM via TWRP.
So how to get around this when the updater is telling you there is an incremental update?
Simple, we tell the updater to download the full image instead, move the update from the original folder so MIUI won't attempt to upgrade from it on next reboot, boot into TWRP and flash the image there.
1. Settings -> About Phone -> System update -> three dots -> Download latest package
2. Get filename of the update:
3. You now have the filename of the update. I got miui_DAVINCIEEAGlobal_V10.3.15.0.PFJEUXM_b6738621e2_9.0.zip and will be using this name throughout the rest of this how-to, replace the examples accordingly based on what name you got.
4. (optional) Backup the latest ROM file to your PC:
5. Prevent MIUI from seeing the update file and trying to update from it on accident by moving the file a folder higher:
6. Power phone off
7. Boot into TWRP by holding PWR+VOL_UP during boot
8. Flash the ROM via TWRP
9. Flash Magisk if you use it, flashing the ROM deletes it.
10. Boot back into Android and remove the update file:
That's it!
You can also download the full ROM directly through miui.com, but keep in mind the website does not instantly update the link there after a ROM update is released.
https://en.miui.com/download-361.html#619 -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab.
Page best viewed in Firefox, clicking on the lock icon -> Arrow icon in the security tab -> Disable protection, since Xiaomi can't even set their website up properly.
In my case the ROM download through phone was corrupted and I had to edit the site URL from the filename I got to get a proper update file:
Click to expand...
Click to collapse
Redmi K20 Open Beta File Link?
Wrong thread.
Don't quote the OP, it clutters the thread.
For people who want the 10.3.15.0 update. I uploaded it to mega. Link is here:
https://mega.nz/#!pddQUaBL!s5En8LWaxWciUyNowU8_rYYMk2D48Dj8J7_PbJwv0kc
C0rn3j said:
...
https://en.miui.com/download-361.html#619 -> My phone is the EEA version, so I use the 'Mi 9T EEA' tab.
Page best viewed in Firefox, clicking on the lock icon -> Arrow icon in the security tab -> Disable protection, since Xiaomi can't even set their website up properly.
...
Click to expand...
Click to collapse
The most accurate, updated and actual site for Mi 9t/K20 (davinci) firmware/rom - https://mirom.ezbox.idv.tw/en/phone/davinci/
10.3.15 ota is back online, just received it
Hey @C0rn3j
I am on stock 10.3.12.0 PFJEUXM and TWRP 4PDA 3.3.1.-2 fix and Magisk.
My questions:
1. Is it worth the upgrade to MIUI 11 as it is still Android 9
2. If I flash it through TWRP, did you loose any dual app settings? (as I lost dual apps while backing up the phone with TWRP and Titanium backup)
3. as you said I have to flash the Magisk again, did you choose the latest or the same as was installed on the phone before the upgrade?
Thanks in advance for reply
rastip said:
Hey @C0rn3j
I am on stock 10.3.12.0 PFJEUXM and TWRP 4PDA 3.3.1.-2 fix and Magisk.
My questions:
1. Is it worth the upgrade to MIUI 11 as it is still Android 9
2. If I flash it through TWRP, did you loose any dual app settings? (as I lost dual apps while backing up the phone with TWRP and Titanium backup)
3. as you said I have to flash the Magisk again, did you choose the latest or the same as was installed on the phone before the upgrade?
Thanks in advance for reply
Click to expand...
Click to collapse
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
C0rn3j said:
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
Click to expand...
Click to collapse
I have Nova Launcher, do you use default or as well external one?
Do you think Nova will stay untouched with this upgrade?
rastip said:
I have Nova Launcher, do you use default or as well external one?
Do you think Nova will stay untouched with this upgrade?
Click to expand...
Click to collapse
Nothing will happen to it
If the Magisk have to be flashed again, does it mean all the hide settings which were there before has to be set again or stay there from the old version? I have few apps in Magisk hide root, so just wondering how this will be affected with rom update
A second question:
I am on 10.3.12.0 not upgraded yet to 10.3.15.0.
Can I upgrade straight to V11.0.2.0 or first to 10.3.15.0 and then to V11?
---------- Post added at 05:27 PM ---------- Previous post was at 05:09 PM ----------
C0rn3j said:
1. Security updates.
2. I don't use dual apps so I wouldn't know. AFAIK people had issues with using the backup/restore functionality of TWRP on that version. You should probably update it as I believe latest is -4
3. Latest.
Click to expand...
Click to collapse
While flashing did you untick Recovery in the TWRP as I believe the whole 2,2GB ZIP has recovery image and could be flashed and overwrite the TWRP?
Your guide not working, twrp failed to install the update "file corrupted".
I've downloaded the OTA package from "http://c.mi.com//miuidownload/detail?device=1700361" and twrp very happy to install this file, my Mi_9T at the latest update 11.
Unfortunately the archive downloaded through the Updater cannot be flashed as is through TWRP (message: file corrupted)
miui_RAPHAELEEAGlobal_V11.0.3.0.QFKEUXM_153f9511ae_10.0.zip
OTA Updates
- 20.6.4, which fixes a few small bugs.
- 20.6.11, with a few more small fixes.
- 20.6.18, with a few more small fixes.
- 20.7.2, with a few more small fixes.
- 20.7.9, with a few more small fixes.
- 20.7.16, with a few more small fixes. Note this version includes the July 2020 Android 10 security patches.
- 20.7.23, with a few more small fixes. From the changelog, this is a minor update.
- 20.7.30, with a few more small fixes. Note this version includes the August 2020 Android 10 security patches.
A few tips for OTA updating after a first xiaomi.eu install:
1. Use the included Updater app.
2. Be patient. The screen will go black for quite a few seconds, just wait. Also, wait a few seconds at the MIUI logo.
3. Note there is no need to wipe or format data or any partition for OTA updates. The Updater app takes care of everything and no data is lost.
I managed to install xiaomi.eu MIUI 12 ROM, latest beta 20.5.28 on my Mi 9T. This is done in three basic steps:
1) Unlock the bootloader. Note that you don't need to wait 168 hours anymore, just use the Mi Unlock app and you can do it in a few minutes (requires a PC). Check the Mi Unlock app for detailed instructions. Link to Mi Unlock tool: https://xiaomitools.com/mi-unlock-tool-en/
2) Install TWRP latest version. Note that there is a trick here because if you reboot into recovery just after installing TWRP, the normal Mi recovery will overwrite TWRP. Instructions to avoid that are found on the TWRP website. Link to TWRP for Mi 9T / Redmi K20: https://dl.twrp.me/davinci/
Instructions to flash TWRP: https://twrp.me/xiaomi/xiaomimi9t.html
3) Flash xiaomi.eu ROM. Again there is a little trick here that you must format data partition with TWRP before flashing the xiaomi.eu ROM. I forgot to do that the first time around and got a TWRP bootloop, solved by recopying the xiaomi.eu img file using adb push and then reflashing the xiaomi.eu image. Again here the correct instructions are found in the xiaomi.eu website.
Link to xiaomi.eu MIUI 12 beta roms and installation instructions: https://xiaomi.eu/community/threads/20-5-28.56038/
4) Definitely enjoying Dark Mode on MIUI 12! Try it!
AndrewADB said:
I managed to install xiaomi.eu MIUI 12 ROM, latest beta 20.5.28 on my Mi 9T. This is done in three basic steps:
1) Unlock the bootloader. Note that you don't need to wait 168 hours anymore, just use the Mi Unlock app and you can do it in a few minutes (requires a PC). Check the Mi Unlock app for detailed instructions.
2) Install TWRP latest version. Note that there is a trick here because if you reboot into recovery just after installing TWRP, the normal Mi recovery will overwrite TWRP. Instructions to avoid that are found on the TWRP website.
3) Flash xiaomi.eu ROM. Again there is a little trick here that you must format data partition with TWRP before flashing the xiaomi.eu ROM. I forgot to do that the first time around and got a TWRP bootloop, solved by recopying the xiaomi.eu img file using adb push and then reflashing the xiaomi.eu image. Again here the correct instructions are found in the xiaomi.eu website.
Click to expand...
Click to collapse
Too bad you just posted this guide. Yesterday I spent all night trying to laugh. Only today was I able to install the Rom. It's sensational. Congratulations on the post, it's well explained, just missing the details of the tricks rsrsrsrsrs
wintermedeiros said:
Too bad you just posted this guide. Yesterday I spent all night trying to laugh. Only today was I able to install the Rom. It's sensational. Congratulations on the post, it's well explained, just missing the details of the tricks rsrsrsrsrs
Click to expand...
Click to collapse
I added some links to help people interested find the correct method for installation.
I encountered battery drain problem overnight with this update
ayazuddinkhan said:
I encountered battery drain problem overnight with this update
Click to expand...
Click to collapse
I have configured AOD and yet I only lose around 5% charge overnight. So not a problem in my case.
TWRP bootloop
3) Flash xiaomi.eu ROM. Again there is a little trick here that you must format data partition with TWRP before flashing the xiaomi.eu ROM. I forgot to do that the first time around and got a TWRP bootloop, solved by recopying the xiaomi.eu img file using adb push and then reflashing the xiaomi.eu image. Again here the correct instructions are found in the xiaomi.eu website.
Hi, I come from global 11 stable and I try to flash mui 12 but go on TWRP bootloop even I format data before flash rom, can share link or xiaomi.eu img file to try to resolve?
TWRP bootloop solution
MattiaRomano said:
Hi, I come from global 11 stable and I try to flash mui 12 but go on TWRP bootloop even I format data before flash rom, can share link or xiaomi.eu img file to try to resolve?
Click to expand...
Click to collapse
1) Boot into TWRP.
2) Connect phone to PC and make sure you have drivers installed as well as adb tool.
3) Download latest xiaomi.eu davinci MIUI 12 beta ROM image to your PC.
4) Using TWRP, format data partition.
5) Use adb push command on PC to copy ROM image file to your Mi 9T.
6) Using TWRP, flash image file and reboot.
Hi,
My sensors don't work and the Phone app crash on incoming calls, it's me or someone else has this issue?
Any solution for this let me know, thanks !
ierv69 said:
Hi,
My sensors don't work and the Phone app crash on incoming calls, it's me or someone else has this issue?
Any solution for this let me know, thanks !
Click to expand...
Click to collapse
xiaomi.eu has a forum specifically for bugs. I think it's just you. Solution: reflash stable MIUI 11 ROM, reset to factory settings, test sensors and incoming calls, and retry with another MIUI 12 ROM.
AndrewADB said:
xiaomi.eu has a forum specifically for bugs. I think it's just you. Solution: reflash stable MIUI 11 ROM, reset to factory settings, test sensors and incoming calls, and retry with another MIUI 12 ROM.
Click to expand...
Click to collapse
Thanks !!!!
Hi everyone
any of you have ghost touch problems with version 20.5.28?
oiram58 said:
Hi everyone
any of you have ghost touch problems with version 20.5.28?
Click to expand...
Click to collapse
Not at all.
AndrewADB said:
Not at all.
Click to expand...
Click to collapse
Thanks for the reply
for now I am back on version 20.5.21 and everything seems to be working well
I will wait for the next update which I believe will arrive today
oiram58 said:
Thanks for the reply
for now I am back on version 20.5.21 and everything seems to be working well
I will wait for the next update which I believe will arrive today
Click to expand...
Click to collapse
Just OTA updated to 20.6.4, it fixes a few small issues and for me, it's working fine as far as I can tell. :good:
On Titanium atm, and wondering whether I should try latest xiaomi.eu but had a few questions:
- How do you install v4a on Miui 12? Is it as easy as audio compatability patch, install driver, reboot?
- Can you just replace the stock gallery app with google photos? Will this open from Camera?
- Does xiaomi.eu come with vendor if I flash it? Currently have OSS vendor.
- Is it less laggy than the first beta release on davinci?
- How do you get the Global theme gallery?
- Can I flash, THEN wipe data before reboot?
- Is OTA supported with Orangefox?
Thanks for any answers.
AndrewADB said:
Just OTA updated to 20.6.4, it fixes a few small issues and for me, it's working fine as far as I can tell. :good:
Click to expand...
Click to collapse
which recovery do you use?
All I care is the lag situation. How's the lag thing? Last time I used miui12 beta the system launcher was laggy as hell
oiram58 said:
which recovery do you use?
Click to expand...
Click to collapse
TWRP. It's the one xiaomi.eu recommend, it works fine and has never, ever, failed me.
Criticalstriker said:
All I care is the lag situation. How's the lag thing? Last time I used miui12 beta the system launcher was laggy as hell
Click to expand...
Click to collapse
Zero lag on my Mi 9T with xiaomi.eu MIUI 12 20.6.4 Beta ROM. Everything launches instantly.
No I mean animation lag/stutter