Hello everybody,
I - Problem description
I have been experiencing a problem with my Samsung Galaxy S4 (GT-I9515). The latter turned off and didn't want to start up again.
Two days ago, as I was using my phone, it went off. When I tried to start it again, by pressing the power on button, it just showed the Samsung Logo and then went off again. I have tried several times switching it on, but in vain, it just shows the logo and goes off, yet sometimes it goes with the start up a little bit further by giving the start up sound and the next logo, but then it just goes off again.
II - Solutions tried
1- I have tried a few options I found on the internet, such as formatting the device by means of a pressing the Home key, the Volume up and power on button. However, the problem seems to persist.
2- I have lately tried to flash the device by Odin3, but even the flash did not solve the problem.
After having downloaded a number of firmwares and trying them on the phone, it still didn't work.
At first, I used to download, by mistake firmwares concerned with the GT-I9505 version, and the flash did not pass; however, later I knew that I had to use GT-I9515 firmwares as they are the ones that match with the device, so the flash would pass, but still the phone would not work.
Actually, firmwares I find on the internet seem to be always accompanied with regions/countries, hence one should know the region/ country of his phone to download a specific firmware that would work on the phone, nonetheless, I could never know to what region/country I should download the firmware, as my phone certainly does not belong to the country where I live, as it is imported from abroad.
Unfortunately, even the white sticker under the battery on the phone, does not seem to belong to it, rather it has obviously been changed by another one. So, I can never know the exact data of my phone so I would download the right firmware.
III- Questions:
1- Do you think that flashing the device with the right firmware would solve the problem?
2- Is there any possibility that I can know information about my device, knowing that it does not turn on, and the sticker under the battery has been replaced with another one that does not belong to the phone?.
3- What other solutions can I try to fix the issue?
Thank you for you time, help and coordination.
up
up
Related
Hi, got a galaxy s2 i19210 and using cm-10-20120926-UNOFFICIAL-i9210t
Was having a few random restarts and found that if I tweaked the voltages it would put an end to this. I found I had to use DreamKernel-GTI9210T-v1.7.1CM10-20121010073231-CWM to do this, so I downloaded it and tried to install via the rom manager.
Phone restarted to install, now when it turns on it says the usual 'galaxy s2 i9210' etc, then it usually goes to the blue cyanogen symbol spinning. Unfortunately, it no longer reaches this and the screen stays black. The lights turn on, but screen stays off.
Can't seem to get into download or reset mode with the key combination and sometimes instead of turning off the phone restarts which makes trying the key combinations a bit harder.
Have tried removing and replacing the battery but that didn't help either.
HOWEVER!
My computer recognises the phone although I can't access the hdd because the phone is locked
Odin recognises the phone
So, what options do I have to get my phone working again?
I've looked at a few threads and googled a bit but haven't found anything substantial
To clarify it's a Galaxy S2 i9210T 4G Australian Telstra phone
So I finally got into odin mode and cleared the dalvik cache and did a factory reset. Installed latest i9210 firmware via download mode and odin and everything is working again. Unfortunately I lost all my data but i'd prefer that than a brick. Still doesn't explain what happened in the first place though, did I use the wrong kernel or go about the install the wrong way? I'd like to go back to cm10 but fix the random resets.
You're more likely to get an answer here. Almost everyone here has an I9100/I9100T.
MistahBungle said:
You're more likely to get an answer here. Almost everyone here has an I9100/I9100T.
Click to expand...
Click to collapse
Thanks bud!
Hi Everyone,
First of all I would like to apologize, if I am repeating any question. I tried many threads but I couldn't understand completely. Hence I am afraid I need to ask individually. Hope thats fine with the community.
So, I own a Samsung Galaxy SII since last 27 months. I bought it with Orange on a contract in France and the company unlocked it many months ago since I do not live in France anymore. I have never flashed the phone with any other ROM, or provided root access or anything else. I have always used Kies to update the software. If I remember correctly the phone currently has Jelly Bean on it (4.1.2 I think). It doesn't have any external SD card, just the internal memory.
Due to some unknown reason, since yesterday the phone is not able to boot up. Its stuck at "Samsung GALAXY S II GT-I9100" screen. I tried to used Volume up+Home+Power keys to go into recovery mode which is not possible. I also tried to go in Download mode using Volume down+Home+Power keys which is possible. Then I tried to connect with Kies to connect it but after 15-20 mins Kies gives error in recognizing the device. When I open ODIN 1.85 (I guess that is the version which should work with my phone), it does shows "Added" status for the device.
Now after reading many posts I have realized that restoring to stock rom would resolve the issue, but it still dint for many. What is appropriate way to deal with this problem. I found some stock rom on the page of mobile network comparison webpage , but I am not sure if I should use it or not. Also I am afraid if I should check the region/model etc for this. I guess I should only install ROM which lies in France-Orange category.
I do not care about any data since I back up my phone from time to time. But I do not wish to play around with the phone much, unless required. However I would appreciate if there is any way to restore the contacts and message stuff.
Thank you very much for your help and support. I highly appreciate the effort.
Hi, I've been browsing the forums for people's attempts to fix a problem. At first the phone just turned off and I was unable to turn it on because it was stuck in a boot loop. The rom I had running was an ICS stock rom from hk. During this time i was still able to get into download mode but unable to enter recovery. I have tried many times to get to recovery and then tried to flash with several stock roms too. Upon failing around 10 times I moved on to a custom rom.
This one here:
http://forum.xda-developers.com/galaxy-s2/help/guide-26-12-flash-stock-firmware-rom-t2365701
The Jelly bean one here.
Upon failing from this too and unable to do anything but reset the phone and try again. I managed to turn it off... but now unable to turn it on in any way or get into download mode or recovery.
Is there anything I can try to do to get the phone to be working? What can I do?
Try a jig but understand it's very unlikely to get you into download mode. Service centre or local mobile repair shop for diagnosis (I also doubt it will be JTAG'able).
Edit - Also, search for KingRat's 'jump start' method where you try & boot the phone with just the charger/without the battery.
medow70 said:
Hi, I've been browsing the forums for people's attempts to fix a problem. At first the phone just turned off and I was unable to turn it on because it was stuck in a boot loop. The rom I had running was an ICS stock rom from hk. During this time i was still able to get into download mode but unable to enter recovery. I have tried many times to get to recovery and then tried to flash with several stock roms too. Upon failing around 10 times I moved on to a custom rom.
This one here:
http://forum.xda-developers.com/galaxy-s2/help/guide-26-12-flash-stock-firmware-rom-t2365701
The Jelly bean one here.
Upon failing from this too and unable to do anything but reset the phone and try again. I managed to turn it off... but now unable to turn it on in any way or get into download mode or recovery.
Is there anything I can try to do to get the phone to be working? What can I do?
Click to expand...
Click to collapse
Don't loose hope mate...
Try remove battery and insert charger (optional)...
Press voldown+home+power button then let someone (your mother, father, brother, sister, neighbor or friends) insert the battery for you while still pressing those 3 keys...
I hope it will enter to download mode again...and report back please...
Try to use an other battery, my original one is fuked up, it does nothing.
I bought a new one and it works
I tried plugging my charger to the phone and pressing the 3 buttons and then having someone plug the battery in for me, still wouldn't start up. Also tried it with another battery i have on hand, also no luck.
You know what the options are then. Ignore people making ridiculous suggestions which don't work. My aim is to be honest with people, tell them the truth, and have them either get their phones fixed or replaced as quickly as possible in this situation (let's face it, nobody likes to be without a phone), rather than fill them with false hope & waste their time.
I think I fried my mobo while trying to flash it cause it does head up the phone without showing anything. I am going to order parts on ebay. I got this confirmed by someone at a shop near where I live, however they won't replace the mobo for me even if i do find a working one.
=) luckily this isn't my phone but my dad's who works at home and doesn't mind using an OLD OLD flip phone just for calls for the time being.
Side question, even if i replace the mobo and I get it booted but I still get stuck in the boot screen loop and unable to flash to any stock roms what can I do?
If you replace the motherboard you should fix it without further problems. New motherboard = new NAND, no more bootloop - unless you flash again & the flash is bad; you can't mitigate the risk of a bad flash, you can only do all the sensible things like making sure you're using a PC with reliable USB ports, that you're flashing the correct firmware for your device, that you're using an original Samsung USB cable. Basically, if you're careful, the risk with any given flash is very low.
So, fix the hardware problem, flash stock for your country/carrier once you've done that, and go from there.
[SORRY FOR TITLE BUT IT DIDNT WORK FOR ME LIKE 10 TIMES]
Hi guys, quick information:
Yesterday tried to autoroot my s7 edge with chain fires autoroot. Unfortunately I heard that it wont work on latest firmware after I tried to root it.
So I just wanted to reset my whole Phone. (Accidently) Downloaded wrong Firmware, tried to install it with odin. didnt work. writing failure. Boot loop.
Left it over night (kept it loading over night). Woke up. Phone is VERY hot. Couldnt touch it. ok. removed cable. cool down.
Ok. Noticed I picked wrong one. Downloaded correct one tried again. Didn't work.
Phone wont let me hard reset (wipe cache/ Home Button + Volume Up + Power Button doesnt work)-
Can't even get to Boot Logo-
Can only get into download mode but screen goes black after a while.
Everytime I try to install the stock firmware , progress bars in odin and on phone goes to a third and then phone screen goes black and the bar doesnt move at all. if i normally try to boot it this text shows up: an error has occurred while updating the device software. use the emergency recovery function in the smart switch pc software. Cant use it because it want me to use a serial number i dont have / people on internet said its iemi number but it wont work. on videos on yt i saw people with iemi number AND serial number. in my buying papers no information about this serial number. not on my backcover of my phone.
Don't know what to do.. please anyone help
Information about Phone: SM-G935F
First remove your imei. Never post that openly on a forum or you could end up getting your device cloned.
The serial number is on the box.
You might have very well full bricked your device. Flashing the wrong firmware is a short road to a brick.
The buttons won't work due to partially written software. The wrong software at that.
Your only hope is finding the box and flashing the right software or you will have to send it in for repairs which might cost you a bit.
zelendel said:
First remove your imei. Never post that openly on a forum or you could end up getting your device cloned.
The serial number is on the box.
You might have very well full bricked your device. Flashing the wrong firmware is a short road to a brick.
The buttons won't work due to partially written software. The wrong software at that.
Your only hope is finding the box and flashing the right software or you will have to send it in for repairs which might cost you a bit.
Click to expand...
Click to collapse
sry found a topic with same problem. I guess my s7 edge is now a piece of scrap laying around. no way to fix it.
Laune_ said:
[SORRY FOR TITLE BUT IT DIDNT WORK FOR ME LIKE 10 TIMES]
Hi guys, quick information:
Yesterday tried to autoroot my s7 edge with chain fires autoroot. Unfortunately I heard that it wont work on latest firmware after I tried to root it.
So I just wanted to reset my whole Phone. (Accidently) Downloaded wrong Firmware, tried to install it with odin. didnt work. writing failure. Boot loop.
Left it over night (kept it loading over night). Woke up. Phone is VERY hot. Couldnt touch it. ok. removed cable. cool down.
Ok. Noticed I picked wrong one. Downloaded correct one tried again. Didn't work.
Phone wont let me hard reset (wipe cache/ Home Button + Volume Up + Power Button doesnt work)-
Can't even get to Boot Logo-
Can only get into download mode but screen goes black after a while.
Everytime I try to install the stock firmware , progress bars in odin and on phone goes to a third and then phone screen goes black and the bar doesnt move at all. if i normally try to boot it this text shows up: an error has occurred while updating the device software. use the emergency recovery function in the smart switch pc software. Cant use it because it want me to use a serial number i dont have / people on internet said its iemi number but it wont work. on videos on yt i saw people with iemi number AND serial number. in my buying papers no information about this serial number. not on my backcover of my phone.
Don't know what to do.. please anyone help
Information about Phone: SM-G935F
Click to expand...
Click to collapse
Okay Guys, small update: Just Made my phone work again.
Had no opportunity to install stock firmware somehow for a long time- Tried to install TWRP multiple times with odin failed alot.
Worked a few minutes ago. Why it didnt work? Download Mode stops after a while.
So TWRP installed- Now i can finally open Recovery mode. It told me that there was no os installed. true. I tried to install my os again. it worked.. soo. yea.
what do we learn?
dont root if you dont know anything about your phone :good:
sincerly,
me, the noob.
Hello XDA community,
I have a G965F that is permanently stuck on the first boot screen (Samsung Galaxy S9+ secured by Knox powered by Android) and it will not progress past this point. I have left it on for hours, and it just stays on that screen. Recovery mode does not work; if I try the button combination for it, it just stays on the same screen as mentioned before. However, I am able to get it into download mode. From here, I have tried flashing every firmware I possibly could, of course with the correct region and version, but nothing works, and the situation stays the same as mentioned before. Odin usually finishes up with no problems and reboots the phone, in which case the bootloop happens once again. On the rare occasion that Odin does fail, it will not boot even to the first splash screen but rather to the blue screen with the triangle, telling me to connect it to SmartSwitch and go from there. I have attempted this also, but SmartSwitch only gives some errors, and it fails.
The phone was on the stock firmware for a few years and even updated through Odin when OTA didn't work. It is a UK-unlocked Exynos device. About 2 years ago, I decided to switch to lineageOS using Neuroticals ROM, and that worked flawlessly, OTA updates and everything, 0 problems. I even went back to stock at some point and reinstalled Lineage shortly after because of how much it improved the device. About 9 months since I last did any type of flashing, the phone randomly froze while I was using it (I think the bottom half of the screen went black) and was totally unresponsive until I forced shut it down. This is where the aforementioned problem began.
I thought letting the battery run out would help, but it hasn't. One thing I have noticed is that it either charges very slowly or doesn't at all; it will only stay on for a maximum of a minute after it is unplugged. I left it for a few months, hoping to discharge it completely, but the problem persists.
Apologies for the lengthy post; I've used this site for about a decade for mods on various devices and it has solved all of my problems, but this is the first one that has really stumped me. For the past few months I've spent tens of hours searching various forums and webpages but can find very little about my specific problem. Thank you for any help in advance.
I will include pictures of the codes that download mode shows, and hopefully someone has some answers.
PS. For some reason current binary says "Custom (0x8)" after successfully flashing the stock firmware many times with Odin, but when Odin does fail it will show "Samsung Official". This I cant make heads or tails of.