Hello together,
I have a really big problem with my new HiSense A2 (with 6.0.1 Marshmellow)
This is a double-side Android-Smartphone from Alibaba with a 5.5" LCD on front and a 5,2" EInk on back.
So, it will be impossible to find a working custom ROM, for this device as I believe.
I really love this device - if two problems were solved....
1. Problem
Tried to unroot with RootKHP Pro 1.9 - when finished, it says OK - device is rooted, but SU says not rooted and no access to the system-directory.
Then tried KingoRoot - it recognice the Device as Hisense A2 but brakes operation and can't root it.
Is there a possibility to root this Smartphone?
Had rooted all my devices in past cause using titan-backup and other apps that needs root-access.
2. Problem
I'm developing watchfaces for the Samsung Gear S2 and S3 and own this wearables.
Unfortunately the app "Samsung Gear" isn't compatible to the HiSense.
So I got the three apps:
- Samsung Gear
- Samsung Accessory Service
- Gear S Plugin
from my old (and rooted) Smartphone, a LG G2 and installed them onto the HiSense.
Installation was sucessful and everything seemed to be OK.
Can connect the Gear S2/S3 with Bluetooth to the HiSense, they appear as paired devices in the bluetooth-list.
But the app Samsung Gear could'nt establish a connection to the Watches and stays in searching mode - anyhow the Watches are paired and accepted the code with 6 numeric chars..
Is there a way to get Samsung Gear connecting the Watches and push the notifications from the HiSense onto the Watches?
Searched hours and hours in the web for help.
But could'nt find a help anywhere.
Hope, some here can help me to become glad with the Hisense.
kind regards
Veronica
If someone is looking for rooting the Hisense A2.
The multilingual version 6.03.09.00 is rootable with:
https://drfone.wondershare.com/andr...medium=droidmodderx1&utm_campaign=androidroot
The app costs $20, but only one, I found, what works.
kind regards
Veronica
Hi,
I tried to root my A2 using kingroot, towelroot, framaroot and one click root apps without success before I found this thread.
drfone app showed "rooted" although the phone was not rooted. Meanwhile, the windows version offers rooting for free and it rooted my phone. However, I am trying to unbrick it since the following reboot...
It is quite possible that this problem would not exist without the numerous previous failed attempts.
Regards
Peter
Hi Peter,
do I understand correct, DrFone in Windows free version was able to root your A2, but now your device is bricked after a reboot?
This sounds really fatal.
Hope, you're able to bring your Phone back to lifeain - crossing fingers for.
If your A2 is working again, could you explain, what you did with, please?
kind regards
peter s said:
Hi,
I tried to root my A2 using kingroot, towelroot, framaroot and one click root apps without success before I found this thread.
drfone app showed "rooted" although the phone was not rooted. Meanwhile, the windows version offers rooting for free and it rooted my phone. However, I am trying to unbrick it since the following reboot...
It is quite possible that this problem would not exist without the numerous previous failed attempts.
Regards
Peter
Click to expand...
Click to collapse
Hello
normally you only need to follow the following tutorial:
1.1. first HISENSE A2 version update to latest version(6.09)
https://pan.baidu.com/s/1cfHYMy
Password: 15k5
1.2. down load and copy SdCard root `A2.bin`
1.3 power off phone
1.4 volume up + volume down and power button
if success sd card upgrade mode begin.
PS: JOYGRAM
Hello, everybody,
is there any news regarding root?
Anybody know of a way?
Related
well, i hope this will pass cause I am a noob here..
As an owner of this pretty much cheap and quite alright device I had hard time finding proper root method but in the end it was found..
Mine was already on 4.2.1 and the rest is as usual 1,5ghz dual core, mali 400 graphics, and apparently cortex a7 not a9 as on the box.. but who cares, right!?
so i got to the file (its actually based on crystal_root method from xda but some smart guy somewhere just made it work for 4.2 generic tablet ) I apologize if this si mentioned somewhere else, and I couldn't reply to crystal root board cause i am a noob, but I am sure some people will find this useful, that's all.
ok...you can chat here with me untill i got those 10 posts to upload link, you can google "Aigo M80E - JB 4.2.1 - help with rooting (killing cell standby)" or you can be a good soul and my first mate here and paste link
Cheers!
Hello,
I have the same model, and been looking for root.
Thanks.
MS!
prestigio 8.0 hd root (JB 4.2.1)
copy this file to sd card go to recovery and install
New firmware
New firmware available for our tablet:
PMP5588C_20140102_v1.0.42:
http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5588C/PMP5588C_20140102_v1.0.42.zip
1. New preinstalled applications
2. User agent profile for Android browser updated
3. APN/SPN files updated
4. Skype issue fixed
5. Video player issue fixed
6. Chrome browser bugs fixed
7. Sound Recorder issue fixed
8. Wi-Fi bugs fixed
9. Gallery issue fixed
10. System stability and speed improved
11. Other minor issues fixed
verification
Hello friends, i have problem with verification of modified or created own firmware on my PMP5588c duo, during instaling of this update from recovery, boot loader delet this instalation and displayes " validating error" Is possible break this validation? modified or choose other bootloader? sorry for multiple question. thanks for help David
Prestigio 5588c Rooting Issue
Hello to all.
I have a Prestigio 5588c and I had recently updated it to the latest firmware. I wanted to root this device, but it seems that the new update is not allowing the utoo-root-signed.zip to root it. It keeps failing. I was wondering if there is someone out there that is in the process of renewing the file so that it works on the most recent update from Prestigio.
Thank you in advance for your time and your great work regarding all things that are Android
Az
Root for PMP5588c_Duo
AzahTabor said:
Hello to all.
I have a Prestigio 5588c and I had recently updated it to the latest firmware. I wanted to root this device, but it seems that the new update is not allowing the utoo-root-signed.zip to root it. It keeps failing. I was wondering if there is someone out there that is in the process of renewing the file so that it works on the most recent update from Prestigio.
Thank you in advance for your time and your great work regarding all things that are Android
Az
Click to expand...
Click to collapse
Hello all,
I have the same PMP5588c_Duo device (4.2.1 stock Build PMP5588C.20131231.1.0.42) and managed to easily root it using Kingo root (kingoapp.com). It's a straighforward process:
download the app and install it on your PC
enable USB Debugging from the Developer options on the tablet
start the app on the PC
connect the table and PC with a microUSB cable
do not enable anything else on the tablet (like SD card access)
wait for Kingo to detect it
it will automatically download and install USB drivers to your PC and show a ROOT button
click the ROOT button, wait for 2-3 minutes, it could take up to 10min so be patient
the device will automatically reboot after the root has been applied
at which point disconnect the device
after the restart check for the SuperUser app, it will automatically install it
Have fun.
Z.
Zapryanov said:
Hello all,
I have the same PMP5588c_Duo device (4.2.1 stock Build PMP5588C.20131231.1.0.42) and managed to easily root it using Kingo root (kingoapp.com). It's a straighforward process:
download the app and install it on your PC
enable USB Debugging from the Developer options on the tablet
start the app on the PC
connect the table and PC with a microUSB cable
do not enable anything else on the tablet (like SD card access)
wait for Kingo to detect it
it will automatically download and install USB drivers to your PC and show a ROOT button
click the ROOT button, wait for 2-3 minutes, it could take up to 10min so be patient
the device will automatically reboot after the root has been applied
at which point disconnect the device
after the restart check for the SuperUser app, it will automatically install it
Have fun.
Z.
Click to expand...
Click to collapse
hey Z.
thank you for the guidance.. testing it now so will update shortly.. although the program thought I had a samsung note lol
ok, this is an update.. seems the program did not want to root my tablet. when I started it again, it classed it as a google device, but said connection failed due to cable instability.. guess I will have to try another way
double update... after leaving it for a few days, it seems to have wanted to work.. woohoo. thanks Z for the info
help with prestigio multipad 8.0 HD !!!
Welcome. I have a problem with this tablet.
Tablet died after a crash. There is no option to enter a Power + vol +
also does not move with the micro SD card from the system manufacturer Charges start-up screen and that's it. When connected to a PC saw it as m3-chip.
In total, I found drivers in Device Manager I did update the driver for the M3-chip and now the tablet is listed in my device manager as libusb- win 32 device. I found a program that detects such a connected tablet. The program is Amlogic Image Burning Tool v.1.6.2.2. For the time being this my progress stopped. I was trying to upload with this software firmware downloaded from the manufacturer's website dedicated for this device, but I get the message "find no upgrade" and do not know what to do. Can someone help me ??? I'm not an expert, and the above step I got reading the various forums. To my eye it looks as if they fell bootloader, but thanks to the above program to see the tablet (or rather its processor) and now combines where to download a bootloader to throw it out there and then be able to upload the system such as the sd card. Or is there some other program or a way to restore the dead to life my tablet ??? Can you help ???
1. Turn off the tablet (hold the power button and count to 12
2. Insert prepared SD card https://yadi.sk/d/_6VITNSbhKPyi
3. Press and hold the "Vol +", press "Power ON" for 2 sec.
4. Release all buttons and wait for boot TWRP (about 10 seconds)
5. In TWRP select Install -> update.zip
6. Reboot tablet
testatura said:
well, i hope this will pass cause I am a noob here..
As an owner of this pretty much cheap and quite alright device I had hard time finding proper root method but in the end it was found..
Mine was already on 4.2.1 and the rest is as usual 1,5ghz dual core, mali 400 graphics, and apparently cortex a7 not a9 as on the box.. but who cares, right!?
so i got to the file (its actually based on crystal_root method from xda but some smart guy somewhere just made it work for 4.2 generic tablet ) I apologize if this si mentioned somewhere else, and I couldn't reply to crystal root board cause i am a noob, but I am sure some people will find this useful, that's all.
ok...you can chat here with me untill i got those 10 posts to upload link, you can google "Aigo M80E - JB 4.2.1 - help with rooting (killing cell standby)" or you can be a good soul and my first mate here and paste link
Cheers!
Click to expand...
Click to collapse
Sorry Dude but it doesnt work ..... while updating abort... i tryed with all known firmware from the company ... kingoRoot KingRoot and also OneKlickRoot doesn´t work too. I´m Sad about that...
regards Michael
(Edit: Sorry guys, this is R7, not A7. LOL)
Hello again, guys. I had just sold my ZTE Majesty for a tablet. It's brand new that I got off of Amazon. It was only like 100 dollars or so. But here is my problem... I can't get this to root at all. Every application acts as if it isn't an Android device. I can't connect it to my PC because there isn't a way to view the files from the Tablet to the PC.
I've tried zRoot, Poot, Spaarkyroot, Framaroot, but I couldn't get any of those to work. And like I said, I can't do PC to Tablet connection (or at least I don't know how, there might be a way.)
Thanks for the help, guys! And good luck trying to root the ZTE Majesty!
Android 4.1.1
Model Number R7
try motochopper
Sparkster691 said:
(Edit: Sorry guys, this is R7, not A7. LOL)
Hello again, guys. I had just sold my ZTE Majesty for a tablet. It's brand new that I got off of Amazon. It was only like 100 dollars or so. But here is my problem... I can't get this to root at all. Every application acts as if it isn't an Android device. I can't connect it to my PC because there isn't a way to view the files from the Tablet to the PC.
I've tried zRoot, Poot, Spaarkyroot, Framaroot, but I couldn't get any of those to work. And like I said, I can't do PC to Tablet connection (or at least I don't know how, there might be a way.)
Thanks for the help, guys! And good luck trying to root the ZTE Majesty!
Android 4.1.1
Model Number R7
Click to expand...
Click to collapse
Hi I have a Dragon Touch DTR97 tablet, I as you tried everything I could find to root my tablet, nothing worked. Then I came across motochopper, it worked and my DTR97 is now rooted. Next step is to find a cwm_recovery.img for it. Have not had any luck in flashing a custom recovery image, yet, still trying.
I also have the same model and am looking for a similar solution.
The driver installs correctly and connects without problem, but when USB debugging is enabled and it tries to install the debug driver, it will not install correctly. This causes me to not be able to use it with any rooting programs. Is there anywhere I can get a compatible driver?
Hello I bought this product http://www.staples.com/Nobis-7-inch-8GB-Tablet/product_1052513
But I cant find anything to root it can anyone please help?
darkphate83 said:
Hello I bought this product http://www.staples.com/Nobis-7-inch-8GB-Tablet/product_1052513
But I cant find anything to root it can anyone please help?
Click to expand...
Click to collapse
As an alternative, is there a way to install CM-10 or CM-11 on it? (yeah, I expect if no developers have one here, it might be difficult to develop an image for it). For now I haven't needed to root it, as it's doing what I need for now, but if I want to start moving apps (or app data) off to a microSD card, I may need a root or CM1x version (and Google needs to be *smacked* for disabling SDcard functionality in later Android versions).
I have just purchased one of these NB7022S tablets from Staples as well. I have unsuccessfully been trying to root it for the last couple of days. Any help would be greatly appreciated
I have one of these Nobis NB7022s tablets as well, but the screen has been broken. So since the tablet isn't usable in it's current state, would it be of use to someone to do a teardown/analysis of the device in order to make a CyanogenMod port to it?
success
Just rooted the nb7022s using kingo root. First download the android software developer kit on your pc then open the sdk manager and download every possible update in order to have the correct drivers, not sure which one did the trick because i just downloaded everything. Then in your tablet go to settings-about tablet- then scroll down to build number and click 7 times to unlock developers options on the main settings screen. Go to developers options and turn it on and enable usb debugging. Plug tablet into your PC and install and run kingoroot. Should connect and root your tablet and automatically install superuser. Now I just need to figure out what version of clockworkmodrecovery to flash as recovery because this tabket does not have a supported cwmr, any help on that would be awesome because i dont want to brick my very first rooted device lol. Hopefully this info might help another newbie like myself.
thanks buzzdb666 for the tip on rooting. However, now every time I turn off the tablet and on, it always does a factory reset/wipe so I have to reinstall everything . Wondering if you've encountered the same thing?
Would be an interesting experiment to try, but again, the tablet has a broken screen, and I can't have a mouse *and* a connection to the computer at the same time. I had thought I could at least get the debug info from the tablet in case someone wants to develop an image for a non-broken unit. Once again, it's available if any XDA developers would like to use it for tear-down or testing, since I can't do much with it otherwise. Unless there's a way to extract what someone would need via a microSD card.
Mine is doing the same thing after using Kingo Root. Not sure what can be done since I can't go backwards now.
I bought a Coolpad Arise (edit: Model 5560S) today at Kroger for $10 (and got 500 fuel points doing so). This phone blew me away. The proc, and gpu are better than I expected, it runs 4.4.2, and it has an SD card slot. Now to the issue:
I've been trying to get root on the device but haven't had any luck. Towel(with multiple modstrings) and Kingo didn't do anything. I'm ready to take the next step. I'm an Android developer and feel like I should help get root on this phone. I've tried to emulate the asec venerabilities to no avail. Is anyone else interested in rooting the arise? I'm not sure where to go from here but would like to have root since the stock os seams to be 99% aosp.
Pointers would also be greatly appreciated.
I'm no Dev but would love root as well. Bought 2 last night for stocking suffers for my kids. As you said you can't beat this for 10 bucks. And BTW I got 1000 points which surprised me figured I'd only get 500 for the initial, and considering I usually fill up with 20 plus gallons this phone literally was free with the discount I'll get! Thinking of going to get a third now!
Root would be great
There must be a LOT of these out there with the recent sale(s) on this model.
I'm impatiently waiting for this thread to get some action. I've tried everything. Even some Chinese program called permroot.apk that apparently works with coolpads, but I had no idea what I was doing since I can't read Chinese.
Sent from my SM-N900T using XDA Free mobile app
Do you have the drivers yet? Couldn't you just unlock the bootloader and load TWRP and an AOKP image that's rooted already?
Just got the arise to play around with. Still can't root device.
DataPool said:
Do you have the drivers yet? Couldn't you just unlock the bootloader and load TWRP and an AOKP image that's rooted already?
Click to expand...
Click to collapse
Feel free to tell us how to do that.
Sent from my SM-N900T using XDA Free mobile app
I still haven't been able to get root.. I went out and bought another one thinking that the system update might have locked something down (still couldn't root). Since I have second one, I'm going to try some more invasive options.
CoolPad Arise Needs Root Quick
I have recently recieved the coolpad arise and really want to figure out a way to root it. So thats why i have joined this forum thread. XD
Found this by accident, maybe it'll help get root... if you remove the coolpad battery, and plug in a usb data cable from your computer to the phone, the coolpad screen lights up and says "fastboot mode". I tried some of the usual fastboot commands, ie, oem unlock, but nothing happened, it says "waiting for device".
I bought two more of these the other day (today might be the last day for the sale so stock up).
Also found this thread: [Q] Coolpad 5560s - MegaThread: Info/Rooting??
I bought 4 of them, if I wanted there is 1 more there at the store still, lol
try using google translator i use it for that purpose xD
shabazz18 said:
I'm impatiently waiting for this thread to get some action. I've tried everything. Even some Chinese program called permroot.apk that apparently works with coolpads, but I had no idea what I was doing since I can't read Chinese.
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
try using google translator i use it for that purpose xD
Unroot?
I rooted my coolpad 5560s and now the notifications and screenlock aren't working so i was wondering if there is a way you could unroot.:crying::crying::crying::crying::crying:
Successful root
:laugh: I successfully rooted my coolpad arise after multiple attempts with different software. iRoot, Towelroot, vRoot, OneClickRoot, Chainfire's Root App, and Kingoroot all failed.
Someone made a root toolkit for the coolpad arise, but it failed.
I tried exploit apps to try to get root privs. They didn't work.
I then used Root Genius on a computer and successfully got root.
Do not take any updates before or after you root, because you might not be able to root.
To root enable adb on the phone by going to settings > About Device > and tap build number several times until you get confirmation that you're a dev.
Run root genius, and plug in the phone. Click the root button. If phone prompts to allow the pc access, allow it. It will root the device. You must have a good oem cable and good usb port when rooting. If root fails try again on a different pc or with a different cable. Also while rooting you need internet.
I would recommend deleting the touchpal keyboard and freezing log2file and system updates.
FanboyStudios said:
:laugh: I successfully rooted my coolpad arise after multiple attempts with different software. iRoot, Towelroot, vRoot, OneClickRoot, Chainfire's Root App, and Kingoroot all failed.
Someone made a root toolkit for the coolpad arise, but it failed.
I tried exploit apps to try to get root privs. They didn't work.
I then used Root Genius on a computer and successfully got root.
Do not take any updates before or after you root, because you might not be able to root.
To root enable adb on the phone by going to settings > About Device > and tap build number several times until you get confirmation that you're a dev.
Run root genius, and plug in the phone. Click the root button. If phone prompts to allow the pc access, allow it. It will root the device. You must have a good oem cable and good usb port when rooting. If root fails try again on a different pc or with a different cable. Also while rooting you need internet.
I would recommend deleting the touchpal keyboard and freezing log2file and system updates.
Click to expand...
Click to collapse
Will this Root Genius work with Scratch Wireless ROM? After I root, can I make a ROM dump and backup the Scratch Wireless ROM?
Oh Crap! Now I'm sort of bricked!
I was starting to get some instability (probably due to many device tweaks and the device being almost full, not from Root Genius) on my phone and I went to flash it back to stock for a re-root. This time I gave the root package another try (it didn't work for me the first time perhaps because of maybe some .net framework issues). This time it worked after powering on I followed the instructions and I went through and checked if every app worked. The browser and camera default apps did not work at all. They would open and force close. So, I decided to retry to root toolkit and my device never got pass the "Powered By Android" screen and it wouldn't boot into stock recovery. So I used the Coolpad Official Flash Tools (YGDP) and flash it back to stock. The device didn't work either. I would get the same screen and I was unable to boot into stock recovery.
Please help as I use this device as my everyday device, app dev device, and at my college classes. It is also my primary source for accessing the internet (I use the hotspot often).
Phew, got it fixed by flashing the original stock rom with the company tools.
Hey guys. I've rooted a few phones before, but I've recently purchased this Posh Equal S700a phablet running Android 4.4.2 Kit Kat. However, I cannot root this device for anything in the world. I asked in the XDA assist forum and was directed to this subforum. I've searched around the internet and can barely find anything on the phone, let alone a proper rooting method for it. Does anyone know of a way to root this phone? So far I've tried:
iRoot
-----------
I've tried both the mobile APK and Windows application. The Windows application doesn't detect my phone, even though I have the drivers properly installed. Only USB_DIAG shows next to the picture of the iPod USB cable, but when I click the button to start the rooting, it says no phone is found. The mobile version of the app claims that the phone has been successfully rooted when I press the Root Now button, but the phone never actually roots. Sometimes I will get their version of the SuperUser app installed to my device, but after running a Root Checker app, it says that my phone still isn't rooted. As a matter fact, if I run the iRoot SuperUser app, it will even tell me that the phone isn't rooted and that I will need to run the iRoot application again to reroot the device (but this never works).
Kingo
---------
Kingo actually detects my device and gets to the rooting process. However, when I get to the fastboot menu, the phone will reset once more into the fastboot mode, then restart one last time to take me back to the homescreen. By that time, the Kingo pc app will say that the process has timed out and ask for an email address so that they can send the report to the developers.
Root Genius
---------------
Did 15 minutes of resetting and installing suspicious looking apps. I deleted them and ran a virus scan after the application failed. Anyway, the application kept saying that it successfully added files and was transferring the necessary root files to my phone, etc. Every 5-10%, the device would reset and keep attempting to do the same thing before ultimately quitting at around 80% and saying something along the lines of "Your phone is really tough, do you want to manually root?". From there I get directed to a site in Chinese.
Towel Root
----------------
Device not supported
FramaRoot
--------------
Device not supported
There was also another oneclick flash tool that I tried, but I can't remember the name of it right now. I will have to check when I get back to my Windows desktop. That app also hung early in the process as well after detecting the phone and identifying the basic info such as model number etc.
Did you ever figure this out?
I just go the S700A as a backup phone and would like to root it or upgrade to 5. Did you every figure it out?
S700 equal posh 7" .. Only have 1 home screen??
How do I get more
hi
CaptainDucttape said:
I just go the S700A as a backup phone and would like to root it or upgrade to 5. Did you every figure it out?
Click to expand...
Click to collapse
somebody knows how update or find stock firm for this phone?
I rooted using Dr.fone, now I need a ROM - help XDA, please!
6/16/18: I had Dr.fone installed on myPC so I USB'd into my Posh Mobile Equal L700 and the app found it. It did give me choice of only a "Mediatek" or "Samsung" phone. I was brave and chose Mediatek. The app ran for awhile then showed Root Successful.
Just to check I downloaded RootChecker app from Google Play Store and it shows the phone is rooted. Also, Malwarebytes now keeps giving me the message it is rooted and may be unstable (Oh yippee, that makes me feel good....not.)
Now I am stuck at flashing a new ROM on this device and can't find one that works. Search on YouTube for ROM for Posh Mobile Equal L700 by Sheena Rodriguez - I am prevented from including the actual URL in this posting b/c I have not done 10 posts yet. However, every time I try it, (and apparently I am to download directly into my phone and not into my PC then use a USB to get it to work, but I'm trying that next, even though I have no idea if that is a real "thing"), it comes with a "blocker" page that tells me I need to "try" one of two apps and then the install will finish. That seems way off to me.
Does anyone out there have a reliable ROM to refer me to? I am absolutely raw new to this so I really need a "do this FIRST, second, etc." instructions.
P.S. - a tech from Posh Mobile just told me this phone is no longer supported, even though I'm still within my one-year warranty, and then when I questioned him further he told me Posh Mobile no longer exists. I think the phone itself has decent bones and could still have a lot of life in it, but it REALLY needs a new ROM....
Help!
-sincerely, geogat.