I need help in bypassing the FRP lock on my phone.
I can no longer access the recovery(vol up + power + home) of my phone.
When I try to flash stock firmware thru Odin(v.3.12.7) it is coming up with "Custom Binary(BOOT) Blocked By FRP Lock"
I already tried using Device Initialization & Emergency Software recovery thru Smart switch but it is not recognizing my phone.
I have attach some photos of the problem FYR.
Hope someone can provide a solution to revive my phone.
BUMP
BUMP
BUMP
Related
I have a Hong Kong version Galaxy S6 Edge which I have rooted through Pingpong root. Yesterday, after I installed TWRP recovery through Flashify, the phone could not boot up with this message: "Custom binary blocked by c-rom." I then searched on-line and noted that for our version of the Edge, there is a bootloader lock which must be unlocked before any custom rom or recovery could be installed.
There are on-line solutions for "Custom binary blocked by reactivation" which basically requires the phone to be booted into download mode and install through Odin. I have tried this method but the phone did not seem to react to Odin (not sure if this is due to C-rom lock). Also this method requires removal of the battery which is not possible for Edge.
http://forum.xda-developers.com/showthread.php?t=2486564
I brought the phone back to Samsung Service Centre yesterday but they simply refused to help and suggested that I replaced the motherboard for some US$350. I am sure that there is nothing wrong with the hardware and so did not accept their service plan.
I appreciate that this problem only exists in China version of the phones (see link below) which have C-Rom lock but still I I would be grateful if anyone in the forum could offer me some help here. Would be much appreciated.
http://forum.xda-developers.com/and...locker-apk-t3086609/post60948100#post60948100
Have you tried putting the phone in emergency mode and using the smartswitch recovery mode to try to fix the phone?
Thanks for your comment. As the phone cannot bypass the bootloader lock, I cannot switch it to emergency mode.
Odin works differently you have to boot into download mode by being powered off, then press power, home, volume down, then press up.
Do not connect to computer yet, open Odin, load your files, let it do its thing, then connect to computer, you will see added, then hit start.
Good luck.
Welcome ladies and gentleman to my tail of how i ****ed up my phone. I have researched on possible ways to fix my edge but all so far have failed and possibly screwed me so i'm down to asking for any ideas, tips on how to possible "save" my phone. I attempted to root my phone via King-Root (already know a stupid idea). i forgot to turn off Knox security and when it tried to boot frp lock, and Kernel is not SEAndroid Enforcing. So i went into safe mode (idk whats the correct term for it) cleared all cache and tried to flash new firmware onto the phone, tired 3 attempts and all failed, now its stuck in an error screen reading "An error has occurred while updating the device software. Use the Emergency recover function in the Smart Switch PC Software. I downloaded smart switch just to see if possible it would take it out of the error screen and its not recognized by smart switch. I have heard the use of certain cables effects whether smart switch will recognize the device but i am using the given Samsung micro USB cable. ( I will also ask my dad when hes back if he did anything else to the phone that he didn't tell me about) I just want to know if i have anymore options to UN-brick it, whether it would be a good idea to see if i could get my warranty by destroying the phone or if its a lost cause all together and i should just sell it to at least get some money from it. Thanks for any feedback, it will be greatly appreciated.
Try to flash the correct rom for your device using windows 7...
If it boots in download mode (power button +home button+volume down button) then it should be salvageable. Boot in download menu and from there just flash a stock rom from http://www.sammobile.com/firmwares/ via odin.
Hi
I recently rooted a Galaxy J5 500FN , and one morning when I turned on the device it didn't start up, but instead says "CUSTOM BINARY BLOCKED BY FRP LOCK" ; I googled around and found fix'es for it to reflash stock rom via Odin in Download mode...
So I tried that a few times, but every time I try to flash in odin the phone says "MDM MODE CAN'T DOWNLOAD"
How can I disablre MDM mode?? , OR at least another suggestion to fix the frp lock.............
PLEASE HELP!!!
Thanks
snsmosko said:
Hi
I recently rooted a Galaxy J5 500FN , and one morning when I turned on the device it didn't start up, but instead says "CUSTOM BINARY BLOCKED BY FRP LOCK" ; I googled around and found fix'es for it to reflash stock rom via Odin in Download mode...
So I tried that a few times, but every time I try to flash in odin the phone says "MDM MODE CAN'T DOWNLOAD"
How can I disablre MDM mode?? , OR at least another suggestion to fix the frp lock.............
PLEASE HELP!!!
Thanks
Click to expand...
Click to collapse
Where did you get this phone? MDM lock should be belong to a companies or phone retail store (which has the retail mode with the MDM )
please tell more. I am still looking for the solutions.
so following the guide at https://forum.xda-developers.com/galaxy-j3-2017/development/recovery-twrp-3-1-1-1-samsung-galaxy-j3-t3709056 need help w/ root samsung j3 mission j327vpp , error when flashing twrp
as so far --- The latest version of Odin on your PC. → Link
TWRP Recovery for Galaxy J3. Download
SuperSU. → Download
Data Mount Fix for SuperSU. → Download
Install TWRP Recovery and Root Galaxy J3 2017
Extract the TWRP recovery file, it should have a file with .tar extension.
Install Odin on your PC launch it.
Now turn Off your Galaxy J3 and reboot it into download mode.
Press and Hold Volume Down + Power + Home button to boot your device into download mode.
Then, press Volume Up key to continue.
Now connect your device to PC running Odin.
Upon recognizing the device, Odin will show the message Added in the log box.
[ so i make it all the way to this step, it showed added and everything so far properly, but i noticed that odin will fail, instead of pass, and upon checking everything, the only thing i notice on my j327v is the frp lock : on in the download mode , so restart phone, it restarted fine, but i dont know where to start to try again , also i checked with my devel. options, and there is no option for the OEM unlocking, so please someone can help me get passed this, ive been working on just this phone for a time now, so i looked only place i would knoiw for help in this matter
thanks --- also if needed, [email protected] , another contact method
I am also looking to root my j3 mission sm-j327vpp so if there is a answer it would be greatly appreciated. Or if not possible to root let kno so I don't fiddle
This is how I unlocked the factory reset protection on verizons galaxy mission
If you want to unlock the factory reset protection there's no way to do it through the old-fashioned going into developer mode on this phone particularly you have to basically erase all your accounts off of it Google and your Samsung account and your little message will a pop up saying that you are factory reset protection is not enabled do you want to do this blah blah blah and then there it is unlocked once you reset it it won't be there when you redo your phone so this is the way to have your factory reset protection off when you go to root it...... and thank you very much..... ps... it's right there in the instruction booklet of the phone when you buy it guys come on
Thanks...I was unaware of the instruction booklet for I Em A Reel Old Gee and got mine off the meen streets of Mayne. Thanks A Gain
Hello, I am pretty new to rooting and I have a question. I recently rooted (with TWRP) my phone (Samsung Galaxy J7 2016). Everything seemed to work well until I rebooted the phone. Now whenever I try to boot it, an error message appears at the top right corner saying "Custom binary blocked by FRP Lock".
I tried going to recovery mode, but I wasn't able to get there (I tried holding VolumeUp + Home +PowerButton). However, I got into the download menu without any problems (Holding VolumeDown + Home + PowerButton).
So I did some research on the internet and found a guide (https://technastic.com/remove-frp-samsung-combination-file/) that I followed but in the end, when I started the Combination Firmware in Odin, I got stuck with a message in the log saying "File analysis..". So maybe USB Debugging isn't on. On the other hand, Odin detected my phone so I don't know.
Please help me. Thank you