Related
So, I just received my watch today and I was excited to set it up, but one thing didn't work. The Watch Face Settings inside the Mi Fit app doesn't seem to do anything in the sense that when I try to access it, there is a blue line showing something is loading, but then I am greeted with a blank page.
It need active internet connection to load the watchfaces.
Check your phone Internet connection.
ebeldamasta said:
It need active internet connection to load the watchfaces.
Check your phone Internet connection.
Click to expand...
Click to collapse
I'm connected over Wi-Fi. I should probably try on 4g.
Adrosmart said:
So, I just received my watch today and I was excited to set it up, but one thing didn't work. The Watch Face Settings inside the Mi Fit app doesn't seem to do anything in the sense that when I try to access it, there is a blue line showing something is loading, but then I am greeted with a blank page.
Click to expand...
Click to collapse
I have the same problem
I've been having the same issue since I bought the watch. It's pretty frustrating, since I am not a big fan of the stock watch faces. I've already tried clearing the data of the app and setting up the watch from scratch.
Ni4y said:
I've been having the same issue since I bought the watch. It's pretty frustrating, since I am not a big fan of the stock watch faces. I've already tried clearing the data of the app and setting up the watch from scratch.
Click to expand...
Click to collapse
Did it help? Yesterday I restored my watch and mifit app to factory settings but this did not help
hello , to all
to use Watch Face Settings you can try to use some VPN software to change location to Hong Kong for example...
- sometimes here are problems with connecting to amazfit server from non-china locations((
I tried using HonkKong server using Turbo VPN(android app), doesn't seem to be working. If it works for anyone do let us know
Can't check it now... I have this problem earlier.
Now watch face settings is working (Mifit 3.2.3.1 LolexMod, Bip FW v0.1.0.43)
I try to use Honk kong VPN
And.. The same problem, i cant see watch faces... My version is 3.2.7.2
Same problem. Installed a new watch face through the application notify & fitness for amazfit
Fixed
I managed to fix the error by connecting the Bluetooth clock and being connected, erase the cache and that's it.
I hope it will be helpful.:good:
Stovetoplime said:
I managed to fix the error by connecting the Bluetooth clock and being connected, erase the cache and that's it.
I hope it will be helpful.:good:
Click to expand...
Click to collapse
Just got my bip today and can't see anything on "Watch face settings" page.
Please can you explain your fix in a little more detail please. I tried turning bluetooth on and off, and having wifi on/off but no luck. When you say erase the cache how do I get to that screen? Thanks
I've the same issue. Not yet solved.
Marco1015 said:
I've the same issue. Not yet solved.
Click to expand...
Click to collapse
Seems to be working now, strange
If you login with FB or Google Account please sign out then try to login using Mi Account. That's work for me
riyadibr said:
If you login with FB or Google Account please sign out then try to login using Mi Account. That's work for me
Click to expand...
Click to collapse
1. Unpair Amazfit
2. Sign out Mifit
3. Sign in with Mi Account
4. Pairing Amazfit
5. Done, open Watchface Settings
riyadibr said:
1. Unpair Amazfit
2. Sign out Mifit
3. Sign in with Mi Account
4. Pairing Amazfit
5. Done, open Watchface Settings
Click to expand...
Click to collapse
This doesnt work. It seems something is broken on the page that gives all the list of watch faces. I have another app for custom watch faces which shared a message about something on similar lines.
Solution
I had the same issue, "Local watch faces" is not showing anything, but they seem to be loaded under "Online watch faces". So download a new watch face, for example with "Amazfit Bip & Cor WatchFaces" app, remember the watch face your are substituting. Then go to "Online watch faces", choose the watch face you have substituted (which will still show the original image, not the new watch face!!!) and there you go, your chosen watch face will be loaded to the watch, not the original one.
Quiet confusion really, took me a while to realize this.
Solved blank watch face settings for Amazfit cor
Hello,
I deleted all watch faces downloaded for my amazfit cor. I reinforced to close my Mi app.
I reopened Mi app and reopened Watch Face Settings. It worked again to me.
Hopefully it helps you guys with the same issues as mine.
Hey guys I have a weird problem with my Amazfit Stratos. So everything was working fine last night, but today I discover that I am not getting notifications from my phone (iPhone 6) to the watch. I run the "test notification" option in the app, and they show, but real notification don't... so I restarted the device (the watch) and when it booted up i discover that I don't have the activities and sport screens on the left of the main screen and also the watchface shows only when the watch is "locked" (otherwise it is just.. black). I also see some strange stuff on my last screen (see attachments). The first one opens "sports", the second "Activities" and the last one - "Daily Overview".
Any idea what is going on? It looks like something is not loading properly, but I have no idea what to do. I am using the original firmware.
PS: The good news is that notifications work now.
1. If you are using an APK watchface, probably it's not the right version for your firmware, uninstall and restart watch.
2. Go to Amazfit app settings, widgets and enable/disable one of them, if they do not re-arrange you may need to unpair, logout from Amazfit, login and pair watch again. Unparing erases all data on watch.
I did a factory reset and everything is ok now.
PS: I was using one of the stock watchafaces.
Hello,
I knew that this kind of subject have been posted here few times, I've checked each of them and tried to make steps that have been showed in answers on my device. Unfortunately nothing have worked.
I will try to describe the issue with all possible steps that I've made before posting this subject.
1. I've received an Amazfit GTR 47 mm yesterday, I'm using an iPhone 7 (iOS ver. 13) — everything looks fine, no pairing problem via amazfit app, but when I've tried to check the notifications I saw that. I can only see when someone is calling me and if the alarm is on. WhatsApp, Facebook, SMS doesn't work.
2. All the notifications in the app (tried on amazfir and mifit (was using miband 3 before the watch)) and on phone are on — like they were while i used the band (with shown all the notifications on it).
3. I've tried to pair the watch with second phone based on android - of course everything works fine ( made the factory reset etc)
4. I've deleted the watch and app from android phone, again factory reset, installed the app on iPhone, restarted the iPhone, added the watch as a new one - and still nothing.
i dont have any idea what can i do... if You need and it will help i can make a hundred of screenshots with my settings.
Mine is the same. I'm on IOS 13.2 Beta and I no longer get SMS or phone call notifications. It works fine on Android. I am waiting for the next update so I can go back to a stock IOS 13. Hopefully this will fix it though not holding my breath.
FYI I was having SMS notifications issues with my Garmin Vivoactive 3 as well.
Same here! Doesn’t work on iOS 13!
hi,
I have a iphone, 13.2 beta rom and the solution for your problem, that I found is:
- first you must be loged in amazfit app
- then go to Iphone>Bluetooth>Amazfit GTR> Share system notifications
- there you must turn off, and the turn on, the button for share system notifications, to restart the notification protocol
Everytime you close the app amazfit or reboot the system, you must do this procedure.
I don't know if in the next 13.2 iOS public release the behavior will be the same, but this way we can fix this anoying bug.
Serq071 said:
Hello,
I knew that this kind of subject have been posted here few times, I've checked each of them and tried to make steps that have been showed in answers on my device. Unfortunately nothing have worked.
I will try to describe the issue with all possible steps that I've made before posting this subject.
1. I've received an Amazfit GTR 47 mm yesterday, I'm using an iPhone 7 (iOS ver. 13) — everything looks fine, no pairing problem via amazfit app, but when I've tried to check the notifications I saw that. I can only see when someone is calling me and if the alarm is on. WhatsApp, Facebook, SMS doesn't work.
2. All the notifications in the app (tried on amazfir and mifit (was using miband 3 before the watch)) and on phone are on — like they were while i used the band (with shown all the notifications on it).
3. I've tried to pair the watch with second phone based on android - of course everything works fine ( made the factory reset etc)
4. I've deleted the watch and app from android phone, again factory reset, installed the app on iPhone, restarted the iPhone, added the watch as a new one - and still nothing.
i dont have any idea what can i do... if You need and it will help i can make a hundred of screenshots with my settings.
Click to expand...
Click to collapse
unpair the watch
uninstall amazfit app and install the app again.
before connecting the watch give all the permissions and then connect.
I've done that, but not have fixed. For me is worst, because i've bougth a Mi 9t 128 G and i have an Amazfit GTR. Some one have any information if Android 10 block this?.
Same here. None of the suggestions worked for me...
hello, i was changing the watchfaces for cutom ones, and after trying one, the GTS was freezed in succesfull synced or installed watchface, i dont remember the message, is the one after change the watchface in the app amazfit. well after that i decide to tunr off it pressing the bottom, i restarted it and after the animation message off amazfit it was black. after being black and not response during like 30s its restart itself, and that in loop. restart, aniamtin, black, restart, aniamtion, etc..... pls someone know how to fix it???? i tried to charge it and its charges prefect, its appears the anaimation of charging etc, but the problem is taht, is in bootlloop xd. pls someone who know who to fix it answer me pls :crying::crying::crying::crying:
its fixed. for fix it, put to charge. go to amazfit app and change the watchface for one of the app and it fixed itself. use this if someone have this problem
Hi, thanks for posting your fix.
Mine got rebooting in a loop after freezing when changing the watchface.
I though it was a problem with the watch itself...
Tried changing the watchface while charging like you sugegsted. It doesn't work at the first time, neither resetting to the default view on the device from Notify app, but setting a watchface from the app repositository did the magic !
Now I am playing with watchfaces again, in a regular operative device thanks to you sharing your issue and fix.
hi, i habe the same Problem with the boot loop. but how can you connect to the watch while charging? thx
Thank you for sharing the solution! Had the same problem and fixed it within minutes after reading your post.
Simply connect to the charger, GTS switches to stock charging watchface, and you use the official app to upload an official watchface! Simple as that.
I try it, but my phone can't connect to gts I put it to charge it's working, but when i open the amazfit app, can't see the watch.
rquattro said:
Thank you for.
sharing the solution! Had the same problem and fixed it within minutes after reading your post.
Simply connect to the charger, GTS switches to stock charging watchface, and you use the official app to upload an official watchface! Simple as that.
Click to expand...
Click to collapse
Same problem with GTS watch face
EJIS said:
hello, i was changing the watchfaces for cutom ones, and after trying one, the GTS was freezed in succesfull synced or installed watchface, i dont remember the message, is the one after change the watchface in the app amazfit. well after that i decide to tunr off it pressing the bottom, i restarted it and after the animation message off amazfit it was black. after being black and not response during like 30s its restart itself, and that in loop. restart, aniamtin, black, restart, aniamtion, etc..... pls someone know how to fix it???? i tried to charge it and its charges prefect, its appears the anaimation of charging etc, but the problem is taht, is in bootlloop xd. pls someone who know who to fix it answer me pls :crying::crying::crying::crying:
Click to expand...
Click to collapse
I has the same issue and fixed it by throwing it on the charge and changing the watch face through the Amazfit app.
Amazfit GTR 47 mm Boot Loop Error
Hey Guys!
I have encountered same problem many times. The reason behind this error is incompatible 3rd party watch faces. Don't worry I have the solution as well. Follow below steps and you are good to go.
1. Connect your watch to the charger.
2. Open the app and connect the watch.
3. After successful connection please select the smallest watch face.
4. Install the selected watch face on your Amazfit GTR 47 mm.
5. After installing the watch face, your watch is alive again.
Imran Nazir
i too have experienced same problem. amazefit logo is not going from the screen even on after putting it on charge the amazefit logo is not disappearing from the screen. please someone help me out
@imran___nazir said:
Hey Guys!
I have encountered same problem many times. The reason behind this error is incompatible 3rd party watch faces. Don't worry I have the solution as well. Follow below steps and you are good to go.
1. Connect your watch to the charger.
2. Open the app and connect the watch.
3. After successful connection please select the smallest watch face.
4. Install the selected watch face on your Amazfit GTR 47 mm.
5. After installing the watch face, your watch is alive again.
Imran Nazir
Click to expand...
Click to collapse
Buddy, this is absolutely senseless))) How you can connect watch to app if watch constantly in bootloop mode?! You really think it is possible? ))
hello there, have a boot loop problem with Amazfit GTR-47 and somehow I uninstall the app so now I cant connect the watch to the application ...any suggestion, or I have to check hard durability.
Please any advice from someone who has solved the same problem.
here too. Gts infinity boot loop! help
EJIS said:
its fixed. for fix it, put to charge. go to amazfit app and change the watchface for one of the app and it fixed itself. use this if someone have this problem
Click to expand...
Click to collapse
Thankyou so much! worked on Amazfit X too
I have the same problem and nothing I do, makes the clock start.
May be you try this way:
1. You delete all bluetooth devices from phone
2. Install Zepp APP and open it.
3. Open your gps function in your phone
4. login or register Mi web account
5. Go to devices section in your Zepp APP
6. If there are any devices, delete it.
7. Than add new smart watch
8. Zepp APP finds your GTS device
9. Pair your GTS
10. Probably Zepp APP will upload new firmware
11. Thats all.
When the watch is stuck on amazfit logo, how should I connect the watch with the application, watch is still showing logo and application is stuck on connecting.
AbdullahManaz said:
May be you try this way:
1. You delete all bluetooth devices from phone
2. Install Zepp APP and open it.
3. Open your gps function in your phone
4. login or register Mi web account
5. Go to devices section in your Zepp APP
6. If there are any devices, delete it.
7. Than add new smart watch
8. Zepp APP finds your GTS device
9. Pair your GTS
10. Probably Zepp APP will upload new firmware
11. Thats all.
Click to expand...
Click to collapse
Then. I've tried all tips. I believe I need to rewrite the stock firmware. Has anyone tried?
The firmware is i guess corrupted and customer service of Amazfit is not responding.
dude...
do
farazhasan said:
When the watch is stuck on amazfit logo, how should I connect the watch with the application, watch is still showing logo and application is stuck on connecting.
Click to expand...
Click to collapse
you resolve the issue...
I'm facing the same
can you contact on mail,
[email protected]
farazhasan said:
The firmware is i guess corrupted and customer service of Amazfit is not responding.
Click to expand...
Click to collapse
dude,
could you resolve the issue???
I'm facing the same issue, mine is Amazfit GTR 47mm
can you contact in mail
[email protected]
Hello dear community,
Unfortunately, my GTR 2e developed a strange "glitch" after I installed watchface themes from the zepp app. The "main screen" works normally, the setting and the quicksttingsbar work well, almost all other "views" are glitched and you can't see anything. I m posting pictures of it
I have already tried the following things without success:
1. Multiple factory reset
2. Hold the main button repeatedly for a long time and reboot
3. Uninstall the zepp app
4. All downloaded watch faces deleted
Can someone help me with the problem? Many thanks
That´s very strange but it seems to be a problem with the LCD. Did you hit the watch some were ?
That happen to me also, I applied watchface from AmazFaces app and got this situation. But did reboot and changed to other watchface and now its OK.