Hello,
i bought the SCISHION V88 Android Set-Top-Box.
It has an RK3229 with Android 6.1.
The HDMI port works great but the AV Port delivers no Video Signal an the Option Display Output TV is greyd out.
Is there an additional Firmware that supports the AV video Signal.
The sound works with AV.
9_Mad-Max_5 said:
The HDMI port works great but the AV Port delivers no Video Signal an the Option Display Output TV is greyd out.
Click to expand...
Click to collapse
Maybe you are using the wrong cable, mine is 3.5 jack to 1 (black) for video and (red and white) audio .
Today I just found the problem.
If I put the 4 pin 3,5mm jack all the way in the first part of the pin is way to deep in the body and there isn't anymore a way to transport the video signal.
Gesendet von meinem E6653 mit Tapatalk
Related
Hey. I was wondering how the TV out works on the Vibrant. My last phone was a ipohne 3g and I used a programs called TV out to connect it to my car audio system. With that setup I was able to watch Slingplayer through the car audio display. When I check the TV out box on the Vibrant, I don't get video (just audio). I was told that video can be achieved through the 3.5mm headphone jack. I don't see how this is possible and I don't believe the mini usb is capable of audio/video. Can someone confirm this? Is there a way to utilize the slingplayer the same way as I did with the iphone?
Thanks in advance,
ScottZ0
You have to switch red with yellow or some sh¡t like that
V5 custom vibrant
ScottZ0 said:
Hey. I was wondering how the TV out works on the Vibrant. My last phone was a ipohne 3g and I used a programs called TV out to connect it to my car audio system. With that setup I was able to watch Slingplayer through the car audio display. When I check the TV out box on the Vibrant, I don't get video (just audio). I was told that video can be achieved through the 3.5mm headphone jack. I don't see how this is possible and I don't believe the mini usb is capable of audio/video. Can someone confirm this? Is there a way to utilize the slingplayer the same way as I did with the iphone?
Thanks in advance,
ScottZ0
Click to expand...
Click to collapse
I recently received my 3.5mm to rca plug from amazon for about $3 shipping included. Do you have the specific plug? I'm assuming you do since you said you used to do it with your iphone. Connect only 2 of the 3 rca plugs to the tv. Connect the white male plug for audio to the white female port and then connect the red male plug to the yellow female port for video (YES, YOU HEARD RIGHT. FOR SOME REASON THE RED MALE PLUG WORKS AS VIDEO INSTEAD OF AUDIO). Make sure your tv's input is set to VIDEO 1 or VIDEO 2 etc. Then make sure to check the tv out check box.
Sent from my SGH-T959 using XDA APP
www.goteamfriday.com
The Vibrant's pretty picky about the cables. The correct cable is a standard Red/White/Yellow composite cable, but the wiring is non-standard, so you may have to switch the red and yellow connectors. Also, make sure the plug is plugged ALL THE WAY into the 3.5mm jack on the phone - it's easy to leave out one click. Even still, I've run into a couple cables that would not work no matter what I did (I think this is a grounding issue.)
I recommend the $3 cable from amazon. Took about 3 days for me to receive the cable. The cable was located in New Jersey and I live in Maryland.
Sent from my SGH-T959 using XDA APP
www.goteamfriday.com
Motorola oem cable on ebay for about 5 bucks works correctly, yellow for video and red/white for audio.
ScottZ0 said:
Hey. I was wondering how the TV out works on the Vibrant. My last phone was a ipohne 3g and I used a programs called TV out to connect it to my car audio system. With that setup I was able to watch Slingplayer through the car audio display. When I check the TV out box on the Vibrant, I don't get video (just audio). I was told that video can be achieved through the 3.5mm headphone jack. I don't see how this is possible and I don't believe the mini usb is capable of audio/video. Can someone confirm this? Is there a way to utilize the slingplayer the same way as I did with the iphone?
Thanks in advance,
ScottZ0
Click to expand...
Click to collapse
Hey Scott,
Hope all is well with you - I too have a Vibrant - did you get the cabling figured out? What worked. Look forward to your reply. Thanks in advance - cheers
I've just received the MHL adapter and am excited to be able to use my monitor to display the phone's screen. But my monitor does not have a audio output, so the audio through the HDMI cannot be played. I've rooted and am on the Cognition 1.07 ROM, So is there a hack to route the audio through the 3.5 mm jack when sending the video through the HDMI using the MHL adapter?
Thanks guys,
Did you work out a way to do this? I am thinking of buying an MHL adapter but like you my display does not have sound.
I need to know an answer to this! My monitor doesnt have speakers and theres no way for me to hear the video!
My Dell monitor has 5.1 channel analog 3.5mm sockets at the back for HDMI audio output.
on my SG2 I still can use the audio jack for audio output (headset or just go into any amplifier-audio_in, or any computer etc....) when I use the HDMI cable for TV.
Hey RbbChan what ROM are you using?
RbbCHan said:
on my SG2 I still can use the audio jack for audio output (headset or just go into any amplifier-audio_in, or any computer etc....) when I use the HDMI cable for TV.
Click to expand...
Click to collapse
Hey how did you get it to work? Which ROM and Kernel?
Same problem for me guys...that's a very unpleasent situation!
It can be solved via software though, I'm pretty sure because there is a lag of about half a second between the audio disappears after I connect the HDMI cable, it can't be hardware only.
Is there a place in this forum when we can ask developers to try and find a fix in their custom ROMs ?
I tried this and it worked (audio through my headphones) but the audio also came out through my TV.
VillianRom 2.42/Ninphetamine Kernel.
Killer Bee said:
I tried this and it worked (audio through my headphones) but the audio also came out through my TV.
VillianRom 2.42/Ninphetamine Kernel.
Click to expand...
Click to collapse
Muting the TV ought to do the trick,no?
Thats always a viable option.
Killer Bee said:
I tried this and it worked (audio through my headphones) but the audio also came out through my TV.
VillianRom 2.42/Ninphetamine Kernel.
Click to expand...
Click to collapse
Thank you Killer Bee! It works!!!
I know this thread is a couple of months old but I just wanted to say this saved me from buying an unnecessary $100+ HDMI audio breakout. The headphone jack fit the bill since my new monitor doesn't have audio output.
I'm having the same issue as OP (no sound through headphone jack on SGSII while MHL adapter plugged in). From the other posts it seems like using VillianRom 2.42/Ninphetamine Kernel would work?
Would any other roms & kernels work?
Thanks
I intend to put an HDMI audio splitter in my car, and to use my phone as a media source (later transitioning to a tablet, but that's down the road). What I want to know is if an MHL to HDMI adapter leaves the audio stream intact and untouched - in other words, no dithering, equalizing, or sampling performed.
Furthermore, I assume the phone will output music through MHL with no issues. Is this the case?
The HDMI stripper I'm looking at is here, for reference: http://www.audioholics.com/reviews/cables/atlona-tech-at-hd570
Any help or knowledge would be appreciated!
I've never seen raw audio come out of the MHL port.
e.g. you can't do AC3 passthrough or anything like that, at least not any time I have tried. So no 5.1 audio
Sent from my GT-P7510 using Tapatalk 2
Entropy512 said:
I've never seen raw audio come out of the MHL port.
e.g. you can't do AC3 passthrough or anything like that, at least not any time I have tried. So no 5.1 audio
Sent from my GT-P7510 using Tapatalk 2
Click to expand...
Click to collapse
Is this still the case? If so, how does one get surround over mhl?
nothing ..
fredst said:
Is this still the case? If so, how does one get surround over mhl?
Click to expand...
Click to collapse
I can't really believe that this issue hasn't been solved.
My setup:
Samsung S4 (i9505)
third party MHL adapter (with USB power) (package says, it is able to transmit a digital surround sound stream)
HDMI to HDMI + optical splitter (verified to be able to output surround sound)
The optical cable connects to my surround-pre-amp, hdmi to the TV.
I was not able to find a combination of android player / settings / cable configuration to get the AC3 or DTS stream through the MHL port. I also cannot find any information on this anywhere.
Any help would be very much appreciated.
Hi,
I got my note 3 the other week and just got the samsung smart dock today.
The note 3 is brilliant so far and as far Im aware it is MHL 2.0 compliant.
I plugged in the smart dock last night into my reciever and I got the screen mirrored onto my tv however I am getting no sound at all
However If I plug the hdmi cable into my TVs hdmi input I get both video and sound (the problem being that my tv has an issue with DT, DTS HD etc. All I can do is pass a dolby digital signal to my reciever via optical cable.
The reciever works perfectly fine for HDMI out from my htpc at the mometn (and to confirm it wasnt the settings on the reciever I ever plugged the dock into the same input as the HTPC (replaced it temporarily) Still no sound.
Does anyone have any idea why the audio works through my tv and not the reciever? (my reciever is a denon 1910, my tv is a Samsung B650) As far Im aware audio over hdmi is a standard and if anything the recoever should be able to work better as it can decode more formats.
The other thing I noticed was that I am getting 1080p at 30hz, does this make the smart dock only MHL1.0 compliant?
Any help would be greatly appreciated.
Thanks in advance
go to settings / accessory and then either click or unclick the audio out mode. then try.
HOGWILD said:
go to settings / accessory and then either click or unclick the audio out mode. then try.
Click to expand...
Click to collapse
Thanks for the fast responce. This does tie into what I have read elsewhere unfortunately it didnt seem to have an impact for me I have tried both ticked and unticked. my reciever still gets no audio.
(My TV only recieves audio if it is unticked)
In the same place there is an option for HDMI surround or stereo, have you tried changing that around?
Sent from my SM-N9005 using Tapatalk 4
RavenY2K3 said:
In the same place there is an option for HDMI surround or stereo, have you tried changing that around?
Sent from my SM-N9005 using Tapatalk 4
Click to expand...
Click to collapse
Unfortunately yes. Maybe I havent tried all combinations of the 2 options though.
I think I tried unticked stereo, surround unticked and surround ticked. I can try messing with these again tonight to see if it has any affect.
Is there any reason these settings would need changing for plugging into a reciever vs plugging into my tv directly? I would have thought if it works for one it should work for the other.
Thanks again for the help
no luck, tried all combinations of both of those settings. no sound at all coming out of my reciever
Rbentley100 said:
Hi,
I got my note 3 the other week and just got the samsung smart dock today.
The note 3 is brilliant so far and as far Im aware it is MHL 2.0 compliant.
I plugged in the smart dock last night into my reciever and I got the screen mirrored onto my tv however I am getting no sound at all
However If I plug the hdmi cable into my TVs hdmi input I get both video and sound (the problem being that my tv has an issue with DT, DTS HD etc. All I can do is pass a dolby digital signal to my reciever via optical cable.
The reciever works perfectly fine for HDMI out from my htpc at the mometn (and to confirm it wasnt the settings on the reciever I ever plugged the dock into the same input as the HTPC (replaced it temporarily) Still no sound.
Does anyone have any idea why the audio works through my tv and not the reciever? (my reciever is a denon 1910, my tv is a Samsung B650) As far Im aware audio over hdmi is a standard and if anything the recoever should be able to work better as it can decode more formats.
The other thing I noticed was that I am getting 1080p at 30hz, does this make the smart dock only MHL1.0 compliant?
Any help would be greatly appreciated.
Thanks in advance
Click to expand...
Click to collapse
Not trying to high jack your thread but what smart dock you are talking about ? it is the same that is available for note ?
vikramdhani said:
Not trying to high jack your thread but what smart dock you are talking about ? it is the same that is available for note ?
Click to expand...
Click to collapse
Sorry, thought I had already replied to this. Yes, this is just the note 2 dock. as I assumed it is just using th MHL standard I believe the note 3 should be just as compatable as the Note 2
Note 3 smart dock
The note 2 smart dock worked with my note 3 with sound? See here:
youtube.com/watch?v=lWN43pnkg0s
This is a long shot but on your note 3, go to settings>general>accessory>check off "Audio output mode" (Use external speakers when device is docked).
See if that works?
---------- Post added at 04:29 PM ---------- Previous post was at 04:23 PM ----------
Also, I know this is silly but try unlpugging the smart dock power source and then replugging it in the back of the dock. Someone had issues where reconnecting the power source on back of the dock helped resolve some recognition issue with the usb. Long shot but worth a try.
Hi guys,
I'm looking to purchase a new mobile soon and liked the idea of the 120fps video possibility the z2 brings. However one of the main things I will be using the phone for is as my car's audio system. It takes a digital signal via coaxial. I have a hdmi to coaxial converter to strip out the audio signal and I know it is possible to purchase a miniusb to hdmi cable for the phone which I can then power off the car battery with a 12v to 5v converter - however does the phone itself support doing this? Is there any apps that will output the digital file without processing it through the phones dac? Is there a limit to the bit quality of the sample e.g. 44.
Many thanks for any help with this - sorry if it's a dumb question but I didn't manage to find the answer when I browsed the forum.
If there is an alternative phone that would be better for this please recommend away! (I briefly looked at the Meizu quad core phone but the phone itself doesn't have much support and if I'm correct the newer versions of android may support what I am trying to achieve?)
Cheers!
Darren
the stock rom/kernel comes with native support for USB audio. I've used it with a fiio e17 which has an SPDIF out
Sent from my Xperia Z2 using XDA Free mobile app
tonysunshine said:
the stock rom/kernel comes with native support for USB audio. I've used it with a fiio e17 which has an SPDIF out
Sent from my Xperia Z2 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you for the reply! What are you using cable wise? Mini usb to hdmi to a splitter then to s/pdif input into the fiio e17? Did you have to change the options to output digital audio? Does it bypass the equalizer/dac in the phone?
Many thanks!
Darren