Related
Q&A for yuphoria usb driver
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for yuphoria usb driver. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
nikhil3737 said:
i am unable to connect my phone while in fastboot mode,.........due to driver issue,,......please provide me a link for the driver
Click to expand...
Click to collapse
Before anything please note to disable Driver Signature Verifications in Windows (Google it).
Than download Universal Naked Drivers
from--
http://www.xda-developers.com/universal-naked-driver-solves-your-adb-driver-problems-on-windows/
Now boot into fastboot mode -
In the Device Manager locate your Android device. Then right-click on it and select "Update Driver Software".
Select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer".
Select "Show All Devices".
Press the "Have Disk" button.
Enter the path to the Google USB driver. (path where you have extracted universal naked drivers)
Select "Android bootloader Interface" from the list of device types.
Confirm the installation of the driver by pressing "Yes".
Confirm the installation again by pressing "Install".
When the installation is done, press "Close".
50 % done :good:
**NOW BEGINS THE ROOTING**
Step 1. Enable the USB debugging on your phone. Go to Settings > About Phone > Scroll down and tap build number 7 times until you will see a popup stating ‘You are now a developer.
Step 2. Now go back and you will see the Developer option on the settings just above About Phone. Open it and enable it and turn on Advanced Reboot option, Now scroll down and turn off Update Cyanogen recovery.
Step 3. Now install the ADB and Fastboot file on your windows desktop from here and the setup will create a ADB folder on your C Drive (C:\adb)
Step 4. Connect your phone with PC/Laptop.
Step 5. Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
Step 6. Now open the ADB folder on your desktop the same folder that you created in Step 3. In the folder press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Step 7. Now run the following command to confirm if your YUphoria is detected by PC in Fastboot Mode or not:
fastboot -i 0x2A96 oem devices
Step 8. Now Run the following command to unlock bootloader:-
fastboot -i 0x2A96 oem unlock
Step 9. After that to reboot the phone run the following command:-
fastboot -i 0x2A96 reboot
Yu-Yuphoria-Rooting-Commands
Now the bootloader is unlocked and next step is to install TWRP and root the phone.
INSTALL TWRP AND ROOT YU YUPHORIA
Strep 1. Enable the USB debugging on your phone. Go to Settings > About Phone > Scroll down and tap build number 7 times until you will see a popup stating ‘You are now a developer.
Step 2. Now go back and you will see the Developer option on the settings just above About Phone. Open it and enable it and turn on Advanced Reboot option, Now scroll down and turn off Update Cyanogen recovery.
Step 3. Download the TWRP file for the phone here and paste the same on the ADB folder on your C drive.
Step 4. Download the SuperSU zip file here and save on your phone internal SD card.
Step 5. Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
Step 6. Now again open the ADB folder and press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Step 7. Now run the following command on your phone to install TWRP:-
fastboot -i 0x2A96 flash recovery twrp.img
Step 8. Once flashed phone will restart and boot it into Recovery mode. Press Volume Up+Volume Down+Power button altogether. YUphoria will boot into recovery mode TWRP which was flashed by you.
Step 9. Once you are on recovery mode. Select Install zip >> Choose zip from /sdcard >> 0/ >> Select Supersu.zip >> Yes – Install Supersu.zip
Step 10. Go Back and Select Wipe Cache Partition >> Yes Wipe. >> It will take 2-3 minutes to wipe.
Step 11. After this select advanced and select Wipe Dalvik Cache >> Yes Wipe.
Step 12. And now select Reboot System Now >> Yes.
Now your phone will reboot and first boot will take some time, So, Be patient. Now, you phone is rooted. Enjoy.
here is the solution
nikhil3737 said:
i am unable to connect my phone while in fastboot mode,.........due to driver issue,,......please provide me a link for the driver
Click to expand...
Click to collapse
Before anything please note to disable Driver Signature Verifications in Windows (Google it).
Than download Universal Naked Drivers
from--
http://www.xda-developers.com/universal-naked-driver-solves-your-adb-driver-problems-on-windows/
Now boot into fastboot mode -
In the Device Manager locate your Android device. Then right-click on it and select "Update Driver Software".
Select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer".
Select "Show All Devices".
Press the "Have Disk" button.
Enter the path to the Google USB driver. (path where you have extracted universal naked drivers)
Select "Android bootloader Interface" from the list of device types.
Confirm the installation of the driver by pressing "Yes".
Confirm the installation again by pressing "Install".
When the installation is done, press "Close".
50 % done :good:
**NOW BEGINS THE ROOTING**
Step 1. Enable the USB debugging on your phone. Go to Settings > About Phone > Scroll down and tap build number 7 times until you will see a popup stating ‘You are now a developer.
Step 2. Now go back and you will see the Developer option on the settings just above About Phone. Open it and enable it and turn on Advanced Reboot option, Now scroll down and turn off Update Cyanogen recovery.
Step 3. Now install the ADB and Fastboot file on your windows desktop from here and the setup will create a ADB folder on your C Drive (C:\adb)
Step 4. Connect your phone with PC/Laptop.
Step 5. Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
Step 6. Now open the ADB folder on your desktop the same folder that you created in Step 3. In the folder press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Step 7. Now run the following command to confirm if your YUphoria is detected by PC in Fastboot Mode or not:
fastboot -i 0x2A96 oem devices
Step 8. Now Run the following command to unlock bootloader:-
fastboot -i 0x2A96 oem unlock
Step 9. After that to reboot the phone run the following command:-
fastboot -i 0x2A96 reboot
Yu-Yuphoria-Rooting-Commands
Now the bootloader is unlocked and next step is to install TWRP and root the phone.
INSTALL TWRP AND ROOT YU YUPHORIA
Strep 1. Enable the USB debugging on your phone. Go to Settings > About Phone > Scroll down and tap build number 7 times until you will see a popup stating ‘You are now a developer.
Step 2. Now go back and you will see the Developer option on the settings just above About Phone. Open it and enable it and turn on Advanced Reboot option, Now scroll down and turn off Update Cyanogen recovery.
Step 3. Download the TWRP file for the phone here and paste the same on the ADB folder on your C drive.
Step 4. Download the SuperSU zip file here and save on your phone internal SD card.
Step 5. Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
Step 6. Now again open the ADB folder and press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Step 7. Now run the following command on your phone to install TWRP:-
fastboot -i 0x2A96 flash recovery twrp.img
Step 8. Once flashed phone will restart and boot it into Recovery mode. Press Volume Up+Volume Down+Power button altogether. YUphoria will boot into recovery mode TWRP which was flashed by you.
Step 9. Once you are on recovery mode. Select Install zip >> Choose zip from /sdcard >> 0/ >> Select Supersu.zip >> Yes – Install Supersu.zip
Step 10. Go Back and Select Wipe Cache Partition >> Yes Wipe. >> It will take 2-3 minutes to wipe.
Step 11. After this select advanced and select Wipe Dalvik Cache >> Yes Wipe.
Step 12. And now select Reboot System Now >> Yes.
Now your phone will reboot and first boot will take some time, So, Be patient. Now, you phone is rooted. Enjoy.
Yup Same here
Yeah!
I installed Pdanet+ and minimal adb & fastboot etc! Not working!
disabled usb debugging and i am stuck on yu logo
QA Bot said:
Q&A for yuphoria usb driver
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for yuphoria usb driver. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
i installed custom recovery on my android and custom boot file but i am stuck on yu logo. when i connect my mobile to pc in fastboot mode, in devices it shows that drivers are properly installed(i installed the drivers you told Pda Net+) but when i give fastboot command it show "waiting for the device"
Elephone M3 quickest way to UNLOCK Bootloader, ROOT and TWRP (no SP FlashTool) Windows/ Linux.
This is only provided as a guide and/ or an alternative, in case some people find the process of flashing with SP FlashTool for the Elephone M3 complicated (either installing the correct drivers, or correctly using the tool without accidentally wiping Vram, or anything else important).
Click to expand...
Click to collapse
Windows:
Things you will need:
1. adb and fastboot
2. usb driver for Elephone M3
3. a copy of a correct version of TWRP for the device, copied in the adb and fastboot folder. Rename your TWRP.img file to recovery.img
4. latest flashable supersu.zip (V2.82 and above) and the recovery.img on external SD card.
Process:
1. Install the above.
2. Boot your phone normally, and enable developer options.
3. From developer options enable OEM unlocking and USB debugging. Connect the device to computer and enable MTP transfer.
4. On your phone's screen you should see a message with a "key" or "fingerprint", accept the connection.
5. Navigate to the folder you have installed adb and fast boot and copied pre-mentioned file.
6. Open a command prompt navigate to the adb folder (not powershell prompt if you are on windows 10 1703) and type: adb devices
If all is well you should get a number on the left and "device" next to it.
7. type "adb reboot to bootloader". You are now in fastboot.
8. type "fastboot oem unlock". Carefully look the really small letters on the elephone' s screen and confirm. Reboot the device. Really important as after unlocking the bootloader, a factory reset is triggered.
9. Once the factory reset is done, once again enable developer otions and usb debugging.
10. Open a command prompt again and once again get into fastboot mode (as previously described).
11. Type "fastboot boot recovery.img". You should now see TWRP.
12. From TWRP select install and install supersu. Wipe dalvik/cache and reboot.
13. Once boot-up completes and you make sure you have root access (you should), for the last time reboot to bootlader.
14. Again "fastboot boot recovery.img". From TWRP select install, install image, select recovery.img from your extenral SD and flash it to recovery.
If all went well, you should by now have unlocked the bootloader, have your device rooted, and also have a functional TWRP recovery! :fingers-crossed::fingers-crossed:
Linux:
Things you will need:
1. abd and fastboot (sudo apt-get install android-tools-adb android-tools-fastboot) ---> or similar for your version of the system.
2. a copy of a correct version of TWRP for the device. Rename your TWRP.img file to recovery.img
3. latest flashable supersu.zip (V2.82 and above) and the recovery.img on external SD card.
Process:
1. Boot your phone normally, and enable developer options.
2. From developer options enable OEM unlocking and USB debugging. Connect the device to computer and enable MTP trasfer.
3. On your phone's screen you should see a message with a "key" or "fingerprint", accept the connection.
4. Navigate to the folder you where you keep the TWRP recovery.img and open a terminal.
5. type "adb devices". If your device is recognized you should see a number and "device" next to it.
6. type "adb reboot to bootloader". You are now in fastboot.
7. type "sudo fastboot oem unlock". Carefully look the really small letters on the elephone's screen and confirm. Reboot the device. Really important as after unlocking the bootloader, a factory reset is triggered.
8. Once the factory reset is done, once again enable developer otions and usb debugging.
9. Open a terminal and once again get into fastboot mode (as previously described).
10. Type "sudo fastboot boot recovery.img". You should now see TWRP.
11. From TWRP select install and install supersu. Wipe dalvik/cache and reboot.
12. Once boot-up completes and you make sure you have root access (you should), for the last time reboot to bootlader.
13. Again "sudo fastboot boot recovery.img". From TWRP select install, install image, select recovery.img from your external SD and flash it to recovery.
If all went well, you should by now have unlocked the bootloader, have your device rooted, and also have a functional TWRP recovery! :fingers-crossed::fingers-crossed:
I am not able to provide links for files or files at the moment, please look for them yourselves, it should not be hard!
If you found the thread useful, I would appreciate it if you hit the "thanks button". :good::good:
Also, do post back if you need further clarification or assistance or if you have any suggestions for improving the guide.
hi Guys,
3days ago, I decided to unlock my boot loader and root my phone via following the steps from www*youtube*com/watch?v=R4c0fO8Kr_Q[/url]
when i tried to flash TWRP - i was stuck in the boot loader warning screen. i am still able to got recovery but it is not being detected can you help me with this?
Normal TWRP has known problems...
You can try flashing Squid TWRP (https://forum.xda-developers.com/mo...wrp-squid-twrp-recovery-moto-e-lte-t3137649): is a unbloated and optimized twrp for our device.
This situation has appened to me and i resolved by installing that TWRP.
dxp420 said:
Normal TWRP has known problems...
You can try flashing Squid TWRP (https://forum.xda-developers.com/mo...wrp-squid-twrp-recovery-moto-e-lte-t3137649): is a unbloated and optimized twrp for our device.
This situation has appened to me and i resolved by installing that TWRP.
Click to expand...
Click to collapse
do you have the steps?
resume666 said:
do you have the steps?
Click to expand...
Click to collapse
From the video you posted before i assuming you have already installed motorola driver and fastboot or mfastboot.
Here are the steps:
0- Download SQUID TWRP and place it in e.g. C:\ (last version is twrp-surnia-3.2.1-r1.img);
1- Shut down your phone;
2- Press Power Button + Vol Up until you see bootloader screen;
3- Now connect your phone to PC;
4- On PC, open a commad window pront (Start -> "cmd" on research bar, then enter);
5- Cmd prompt;
6- Type "fastboot devices". It should show a serial number: PC has recognized your device;
8- Then type "fastboot flash recovery C:\twrp-surnia-3.2.1-r1.img" last parameter is the path where you placed recovery so change it if you have choosen another path;
9- Wait for 3-4 seconds until the prompt shows something similar to "complete" or "success";
10- Type "fastboot poweroff" and your device shuts down.
Now you have installed Twrp Recovery, if you want access it, repeat steps 1-2 and select recovery from bootloader menu.
If you want install a custom rom i suggest SlimRoms : follow the instructions to download and install this rom.
dxp420 said:
From the video you posted before i assuming you have already installed motorola driver and fastboot or mfastboot.
Here are the steps:
0- Download SQUID TWRP and place it in e.g. C:\ (last version is twrp-surnia-3.2.1-r1.img);
1- Shut down your phone;
2- Press Power Button + Vol Up until you see bootloader screen;
3- Now connect your phone to PC;
4- On PC, open a commad window pront (Start -> "cmd" on research bar, then enter);
5- Cmd prompt;
6- Type "fastboot devices". It should show a serial number: PC has recognized your device;
8- Then type "fastboot flash recovery C:\twrp-surnia-3.2.1-r1.img" last parameter is the path where you placed recovery so change it if you have choosen another path;
9- Wait for 3-4 seconds until the prompt shows something similar to "complete" or "success";
10- Type "fastboot poweroff" and your device shuts down.
Now you have installed Twrp Recovery, if you want access it, repeat steps 1-2 and select recovery from bootloader menu.
If you want install a custom rom i suggest SlimRoms : follow the instructions to download and install this rom.
Click to expand...
Click to collapse
it did not worked i think i hard bricked it
No it not hard bricked.you just need to flash the stock rom.and then it start working.
Hi, I am new to this and wanna root my phone...
One click method doesn't work....Can any one please help me out???
Well there are no official guide on the XDA forum yet, maybe try kingroot?
Sent from my iPhone using Tapatalk
ghoul99 said:
Hi, I am new to this and wanna root my phone...
One click method doesn't work....Can any one please help me out???
Click to expand...
Click to collapse
Try this:
UNLOCKING BOOTLOADER:
Download Koush Universal adb driver from koushikdutta.com and adb setup.
Install the driver first and install adb after that.
Type n and press Enter when adb setup asks for installing drivers.
After the installation, run command prompt as administrator.
Open File explorer, and navigate to C:\adb
Please take backup of your data before proceeding further.
In C:\adb press Shift+right click and select Open Command Window here.
Enable USB debugging on your phone and connect your phone to pc using USB cable.
Type "adb devices" without quotation marks and press enter.
If it shows some device to be connected, only then proceed further.
Type "adb reboot bootloader" and press enter.
Phone will boot into fastboot mode.
Type "fastboot devices" and press enter.
If it shows some device to be connected, only then proceed further.
Type "fastboot oem unlock" and press enter.
On the phone screen, the phone will ask for confirmation to unlock bootloader.
Once fastboot shows "Success" or "Done" or something else signifying that the command was successful, type "fastboot reboot" and press enter.
Your phone will reboot normally.
Congrats, you have successfully unlocked bootloader.
ROOTING:
1. For Kingoroot:
Download and install Kingoroot for PC.
Enable USB debugging on your phone and connect your phone to PC using USB cable.
Open Kingoroot.
Connect your pc to internet.
Kingoroot will detect your phone automatically and in a few seconds the root button will come up, click it and wait until the process completes.
Your phone may reboot several times during the process.
Congrats, you have a rooted phone now.
2. For Dr Fone:
Download and install Dr Fone on your PC.
Enable USB debugging on your phone.
Open Dr Fone and select Root option.
Connect your phone to your PC with USB cable.
Dr Fone will detect your phone in a few minutes.
Click "Root" button and wait.
Congrats, you have a rooted phone now.
Hit thanks if found useful.
I've tried PC method as well and still not rooted. I didn't performed the bootloader unlocking through adb though. There's an option of OEM Unlock under developer options. Is that that a problem?
UOTE=Augustoandro;75771341]Try this:
UNLOCKING BOOTLOADER:
Download Koush Universal adb driver from koushikdutta.com and adb setup.
Install the driver first and install adb after that.
Type n and press Enter when adb setup asks for installing drivers.
After the installation, run command prompt as administrator.
Open File explorer, and navigate to C:\adb
Please take backup of your data before proceeding further.
In C:\adb press Shift+right click and select Open Command Window here.
Enable USB debugging on your phone and connect your phone to pc using USB cable.
Type "adb devices" without quotation marks and press enter.
If it shows some device to be connected, only then proceed further.
Type "adb reboot bootloader" and press enter.
Phone will boot into fastboot mode.
Type "fastboot devices" and press enter.
If it shows some device to be connected, only then proceed further.
Type "fastboot oem unlock" and press enter.
On the phone screen, the phone will ask for confirmation to unlock bootloader.
Once fastboot shows "Success" or "Done" or something else signifying that the command was successful, type "fastboot reboot" and press enter.
Your phone will reboot normally.
Congrats, you have successfully unlocked bootloader.
ROOTING:
1. For Kingoroot:
Download and install Kingoroot for PC.
Enable USB debugging on your phone and connect your phone to PC using USB cable.
Open Kingoroot.
Connect your pc to internet.
Kingoroot will detect your phone automatically and in a few seconds the root button will come up, click it and wait until the process completes.
Your phone may reboot several times during the process.
Congrats, you have a rooted phone now.
2. For Dr Fone:
Download and install Dr Fone on your PC.
Enable USB debugging on your phone.
Open Dr Fone and select Root option.
Connect your phone to your PC with USB cable.
Dr Fone will detect your phone in a few minutes.
Click "Root" button and wait.
Congrats, you have a rooted phone now.
Hit thanks if found useful.[/QUOTE]
I've tried PC method as well and still not rooted. I didn't performed the bootloader unlocking through adb though. There's an option of OEM Unlock under developer options. Is that that a problem?
ghoul99 said:
I've tried PC method as well and still not rooted. I didn't performed the bootloader unlocking through adb though. There's an option of OEM Unlock under developer options. Is that that a problem?
Click to expand...
Click to collapse
Just check whether the bootloader is unlocked using fastboot.
Type
fastboot getvar all
Click to expand...
Click to collapse
Augustoandro said:
Try this:
UNLOCKING BOOTLOADER:
Download Koush Universal adb driver from koushikdutta.com and adb setup.
Install the driver first and install adb after that.
Type n and press Enter when adb setup asks for installing drivers.
After the installation, run command prompt as administrator.
Open File explorer, and navigate to C:\adb
Please take backup of your data before proceeding further.
In C:\adb press Shift+right click and select Open Command Window here.
Enable USB debugging on your phone and connect your phone to pc using USB cable.
Type "adb devices" without quotation marks and press enter.
If it shows some device to be connected, only then proceed further.
Type "adb reboot bootloader" and press enter.
Phone will boot into fastboot mode.
Type "fastboot devices" and press enter.
If it shows some device to be connected, only then proceed further.
Type "fastboot oem unlock" and press enter.
On the phone screen, the phone will ask for confirmation to unlock bootloader.
Once fastboot shows "Success" or "Done" or something else signifying that the command was successful, type "fastboot reboot" and press enter.
Your phone will reboot normally.
Congrats, you have successfully unlocked bootloader.
ROOTING:
1. For Kingoroot:
Download and install Kingoroot for PC.
Enable USB debugging on your phone and connect your phone to PC using USB cable.
Open Kingoroot.
Connect your pc to internet.
Kingoroot will detect your phone automatically and in a few seconds the root button will come up, click it and wait until the process completes.
Your phone may reboot several times during the process.
Congrats, you have a rooted phone now.
2. For Dr Fone:
Download and install Dr Fone on your PC.
Enable USB debugging on your phone.
Open Dr Fone and select Root option.
Connect your phone to your PC with USB cable.
Dr Fone will detect your phone in a few minutes.
Click "Root" button and wait.
Congrats, you have a rooted phone now.
Hit thanks if found useful.
Click to expand...
Click to collapse
Tried adb setup but shows no devices attached but when tried with my brother's phone it shows devices are connected.
ghoul99 said:
Tried adb setup but shows no devices attached but when tried with my brother's phone it shows devices are connected.
Click to expand...
Click to collapse
Press the "Revoke USB debugging authorization" in Developer Options.
Connect your phone with pc with the phone screen on and unlocked.
The phone will ask for permission, press OK.
Then type "adb devices" in the terminal as directed in the tutorial before.
It will probably show your device.
Augustoandro said:
Press the "Revoke USB debugging authorization" in Developer Options.
Connect your phone with pc with the phone screen on and unlocked.
The phone will ask for permission, press OK.
Then type "adb devices" in the terminal as directed in the tutorial before.
It will probably show your device.
Click to expand...
Click to collapse
Tried but nothing happened. Looks like currently they don't have drivers for this phone. However thanks for your efforts.
I rooted my q452 using the boot.img-patch method for magisk
meghgoswami said:
I rooted my q452 using the boot.img-patch method for magisk
Click to expand...
Click to collapse
Can you tell me the steps or link to any tutorial?
Thanks either way
Yeah, sure -->
You need to have the unsigned boot.img for the q452, download it from here https://drive.google.com/file/d/127pySEIXj-uRyZpWycfRjaihkYgGv9tR/view?usp=sharing
Install the Magisk Manager apk, open it, click on the Install button next to "Magisk is not installed" and then click on Install again.
Then select "Select and Patch a File" and select the unsigned boot.img. Magisk will patch it, and then flash the patched boot image using adb (you need to have an unlocked bootloader). That's it!
meghgoswami said:
Yeah, sure -->
You need to have the unsigned boot.img for the q452, download it from here https://drive.google.com/file/d/127pySEIXj-uRyZpWycfRjaihkYgGv9tR/view?usp=sharing
Install the Magisk Manager apk, open it, click on the Install button next to "Magisk is not installed" and then click on Install again.
Then select "Select and Patch a File" and select the unsigned boot.img. Magisk will patch it, and then flash the patched boot image using adb (you need to have an unlocked bootloader). That's it!
Click to expand...
Click to collapse
Thanks bro!
Can you please tell me the adb commands?
ghoul99 said:
Thanks bro!
Can you please tell me the adb commands?
Click to expand...
Click to collapse
THIS WILL WIPE ALL THE DATA ON YOUR DEVICE, MAKE SURE YOU HAVE A BACKUP OF YOUR DATA
Ok, first you have to enable "OEM unlocking" in the Developer options. The adb commands are-
1. adb devices (to make sure that the device is connected)
2. adb reboot bootloader
3. fastboot devices
4. fastboot flashing unlock OR fastboot oem unlock Then press the volume up button on the phone to unlock the bootloader
5. fastboot reboot bootloader
5. fastboot flash boot boot.img (where boot.img is the unsigned boot.img, you have to put it in the adb folder)
6. fastboot reboot
That's it! Hit the thanks button if I helped you!
meghgoswami said:
I rooted my q452 using the boot.img-patch method for magisk
Click to expand...
Click to collapse
ok
It seems it is on that russian phone hacking site 4PDA but I can't register there because I can't speak russian. But there may be other sites too with the files.
Can't post a link to it because I'm new here but you can just google "neffos x1 lite 4pda"
Would appreciate any help in that matter. I just want to root my Neffos X1 Lite :crying:
How i want to root neffos x1 lite 7.0
Use it, guys )
fromrussiawithhelp
qwerty4pda
But you need to fill the captcha - picture with digital, written by letters.
For example:
"две тысячи пятьсот десять" > you should enter "2510". Use google )
Hi if you want to get root you need to unlok bootloadr with ADB and install TWRP with SP FlashTool and install root with TWRP.
Sorry, but I can not put a link to the files
Unlok bootloadr
1. Fully charge the battery.
2. Download and unpack the adb utility to the root of the C: \ drive.
3. Download and install adb-driver. Note: look for the adb utility and driver for your OS (win XP / 7/10) in the topic.
4. Open the item “For Developers” in the phone. To do this, go to the application "Settings" - "About the phone" - "Information about the software" and 7-10 times tap on the item "Build number".
5. Go to the opened item “For Developers” and turn on (activate) the items “Debug USB” and “Factory Unlock”. If you turn on the "Factory Unlock" item, you will need to enter a code, then enter the code that you set to unlock the screen. Exit the "Settings" item.
6. Connect the phone to the PC with a USB cable. If there are requests on the phone, then click "OK" / "Allow".
Further I will describe the sequence on the example of Win XP.
7. Open the command line: “Start” - “Run” - enter “cmd” and click “OK”.
8. In the window that appears, enter the command: cd C: \ adb and press Enter
9. Enter the command: adb devices and press Enter
A line like this should appear:
Code
xxxxxxxxxx device
*where xxxxxxxxxx is your phone ID.
10. Enter the command:
Code
adb reboot bootloader
*and press Enter.
The phone should go into fastboot mode - “fastboot mode” should appear on the phone screen.
11. Enter the command:
Code
fastboot devices
*and press Enter.
A line like this should appear:
Code
xxxxxxxxxx fastboot
*where xxxxxxxxxx is your phone ID.
12. This item is optional.
Check that the bootloader is locked. Enter the command:
Code
fastboot getvar all
*and press Enter.
In the list that appears, look for the string (bootloader) unlocked and make sure that:
Code
(bootloader) unlocked: no
13. Enter the command:
Code
fastboot oem unlock
*and press Enter.
The “OKAY” line should appear.
14. Warning! Do not skip this item.
Enter the command:
Code
fastboot reboot
*and press Enter.
The phone will start downloading in normal mode.
15. Wait for the phone to load in normal mode.
All - bootloader unlocked.
You can repeat steps 7-12 and make sure that:
Code
(bootloader) unlocked: yes
*
Then boot into the system by entering the command:
Code
fastboot reboot
*and press Enter.
Note: with unlocked bootloader:
1. On the boot screen saver (when you turn on the phone) will appear the inscriptions:
Orange state
Your device has been unlocked and can’t be trusted
Your device will boot in 5 seconds
2. The item "Factory Unlock" will remain on, but will become inactive.
---------- Post added at 11:33 AM ---------- Previous post was at 10:35 AM ----------
I will give a link to TWRP and root to lay out here, because I can’t lay out here, no rights yet.
Install TWRP and root
Installing TWRP recovery via SP Flash Tool
1. Fully charge the battery.
2. Download and copy the SuperSU archive to the root of the phone's memory card. Archive is not necessary to unpack.
Note: the SR1-SuperSU-v2.82-SR1.zip archive was being flashed to itself, which installs the “systemless” root. You can flash any other SuperSU that is suitable for android 7.0. More information can be found in the SuperSU topic.
3. Download and unpack the latest version of the SP Flash Tool to the root of the C: \ drive.
4. Install the VCOM driver on the PC.
5. Copy the MT6750_neffos_scatter.txt file and the recovery.img image to the unpacked SPFT folder.
6. Open SPFT (flash_tool.exe).
7. In the program window that opens, on the “Download” tab, check that “MTK_AllInOne_DA.bin” is selected in the “Download-Agent” line, and in the “Scatter-loading File” line - scatter-file MT6750_neffos_scatter.txt
Note: if the program complains about the absence of the preloader file, download and copy the preloader_tplink6750_65_n.bin file to the unpacked SPFT folder, but the check mark opposite the preloader should be removed.
8. Make sure that the tick in the program window is only on the recovery section, and the path to the recovery image is indicated in the “Location” column.
9. Click the "Download" button.
10. Connect the switched off phone to the PC with a USB cable. The firmware process will begin.
11. Wait until the end of the firmware until the “Download Ok” window appears.
12. Disconnect the phone from the PC. Not including the phone, go to the SuperSU installation.
I will give a link to the files in a personal message
request for files
jormelo87 said:
I will give a link to the files in a personal message
Click to expand...
Click to collapse
hello i have a neffos x1 lite bricked i am triing to solve the captcha on the 4pda but no sucess,can you pass me the files?
i need the original firmware and original scatter file,ive installed the 360Os and now i dont pass from the recovery,i was not able to install the nfos x1 lite because it tells me that i have a tp-link 6750_65_n pls help
jormelo87 said:
I will give a link to the files in a personal message
Click to expand...
Click to collapse
hi
me too.. iwant files mt6750
can ur pass it to me
Neffos X1 Lite
erinramli said:
hi
me too.. iwant files mt6750
can ur pass it to me
Click to expand...
Click to collapse
i also need te firmware file, it keeps me telling that my device is a tplink6750_65_n
tanks
Hello, i now this tread is old but i need this: Neffos X1 lite 2924 boot.img and recovery.img.
Can someone help me?
Thanks