Hello
I need help to install xpose framework on Samsung galaxy S4 TouchWiz android ver.5.0.1 (lollipop)
Processor : ARMv7 Processor rev 0 (v71)
Instruction set : armeabi-v7a, armeabi
Core : 4
SIMD Instructions : NEON
Max Frequency : 1890 Mhz
I already download and install :
Xposed-v87-sdk21-arm.zip
Xposed-v84-sdk21-arm.zip
Xposed-v75-sdk21-arm.zip
Xposed-v75-sdk21-arm-areter97-snapdragon.zip
Wanam Xposed Instaler 1.3.0.zip
Ma.wanam.xposedlollipop_v130_319e40.apk
Xposed Instaler _3.0_alpha4.apk
Xposed Instaler_3.1.1.apk
Buat its seem all of this after installation finish and I open xposed I always found RED NOTICE : THE XPOSED FRAMEWORK IS NOT INSTALLE.PLEASE DOWNLOAD ZIP FILE FROM XDA AND FLASH IT MANUALY VIA RECOVERY.
I do install that zip file with TWRW recovery on recovery mode, so please help me find the right file to install on my S4, thanks
Related
:laugh:Hi Friends!
#####ROOT + TWRP PROCESS FOR Symphony Xplorer Zvii######
( supersu 2.78 download করে memory card এ রাখবেন।)
First download these essential driver in your computer :
+++++++++++++
Mtk usb driver : https://androidmtk.com/download-mtk-usb-all-drivers
Ei link theke sob driver download den : http://gsmusbdriver.com/symphony-zvii
Download latest version driver of given link........After restart your computer
+++++++++++++++++
phone এ super-su er zip file download করে রাখুন: http://downloadmirror.co/Uld/SuperSU...9qUZTMTK0ow=
-----------*********Starting**********-------------
Twrp link: { Recovery.img :http://www17.zippyshare.com/v/QolPVhDe/file.html
Scatter : http://www17.zippyshare.com/v/z1rycq7O/file.html
((Paste recovery.img and scatter into new folder,,( folder er name zvii)
---------------------------------------------------------
Sp flash tool link: http://spflashtools.com/windows/sp-flash-tool-v5-1640
Open sp flash tool and select scatter from the zvii folder and click & check the recovery box option ( যদি ক্লিক করা না থাকে)
(select downloaded zip recovery.img) click download on sp flash tool
sp flash tool e download e click deyar age phone off kore usb দিয়ে connect করেন ( যদি flash শুরু না হই,তাহলে download এর আগে usb cable দিয়ে connect করে battery খুলে download এ ক্লিক করেন। তারপর battery লাগান)
( phone na pele phone er volume down cepe thakun)(battery khula gele battery khule connect korben)
After boot in to twrp flash supersu.zip
twrp e boot নেয়ার পর '''''''''''''''''''''''''''''''''''''''''''''''''' '''''
direct flash supersu zip SuperSU v 2.78 then reboot sytem
-------------------------------------------------------------------------------------------------------
Twrp তে বুট নেয়ার পর super-su এর zip flash করে reboot sytem দিবেন
=====================================
Root এর প্রব্লেম দেখা দিলে kingroot apk use করতে পারেন( কিন্ত supersu 2.78 flash এর পরে)
Only flash supersu 2.78, because this will patch boot.img
।।।।।।।।।।।।।।।।।।ৃ।।।।।।।।।।।।।
( Not bootloop risk)
---
###################################SUߘ܊
_./→Credits Go to:::::::::::::::
> Neenan Adnan [ For testing twrp and giving stock kernal & ramdisk ]
>Amar Nokol Id [ For testing twrp and giving prove ]
>Raiyan Rabbi Tasin [ For made this twrp 3.0.2 recovery]
>This recovery can be port on mt6753 chipset with 3.18.22+ kernal
>Have a nice day & Bye
working twrp
Thanks a lot....
Thanks a lot.........
ভাই Symphony ZVII এর Stock Rom এর কোন Link Share করলে খুব উপকৃত হতাম ।
Ok
For 2Gb version Zvii stock rom :https://docs.google.com/uc?id=0B-RJT6LfT1UgZGFSLUllQk5yc0E
For 3Gb version Zvii Stock rom :https://docs.google.com/uc?id=0B-MhRwAsFeewcUVyMlRJdVQ3RlE
Anyone can confirm its working?
Yes,tested many days ago
pls make a color os custom rom for my device,
Device Specification:
Device Name: Symphony ZVIII
Model Number: ZVIII
CPU: Qualcomm Snapdragon 430, MSM8937
Octacore coxtex-A53, 1.4 GHz
Ram: 3GB
Android Version: 6.0.1
Android Marshmallow
Baseband Version: O.1.2.c2-00073-8937_GENNS_PACK-1
Kernel: 3.18.24-perf-ge672886-dirty
[email protected] #2
Sat Dec 17 17:7:18 CST 2016
Build Number: MMB29M release-keys
Custom Build Version: ZVIII_HW1_V5
Happy new year, in the first place!
Maybe i posted this in the wrong thread, due to my questions, i will try here..
I thought after reading and reading on inet...Gone try here to get a little bit further with a simple but brand new tablet i got from my mother.
That's also the reason why i don't throw it away, i thought lets see if there is a possibility to make it run better then with the stockrom.
And if there is no solution to flash it, what is the best way to backup the rockchip 3168 with 4.2.2 rom off the tablet itself?
Also to try other roms, i don't wane lose my bootloader etc.
Its a new tablet, but the hardware is older and because of that i thought lets see if i can get it maybe a little bit upgraded on the software side.
And if not, maybe another solution.
Therefore i searched a lot, but has anyone....Anyone maybe a direction to look for a maybe better rom.Also with cwm there is nothing what works with this chip, everything based on the maligpu400 or maybe also with the powerVr Sgx 540?
Other solution would be to backup the rom, and clean afterwards the stock rom.But i got stuck in how and what is the best way to do that.
I cant install Cwm recovery, when it installs it doesn't continue.
I also read that people lost their original bootloader, and because i cant find the stockrom online...What would be the best way to do that, i saw the app mtk, and the Rockchip tool but that seemed a lot off work and if i mess up my backup would never work.
Or is it the only way to back up this rom from Rockchip, a full backup kerel, loader etc..
And to try out a rom, install from sd card, and to get back on the stockrom a factory reset is all, or mess i up the recovery installing another rom?
If more info is needed about the chips, let me know.
Thanks ahead!
I will put the specs down here:
- System info droid -
Summery :
Brand name: Empire Electronix (Manufacture :Rockchip)
Device : Rockchip M1002B
Android :4.2.2
Processor : RK30board-ARMv7 Processor rev 0 (v7l)
Cpu Max Freq : 1200 Mhz
Cores : 2
System Ram : 1.00GB (Some apps say 1500mb)
Audio Chipset : Rk30sdk
Internal Storage : 1008Mb(132 mb free)
Internal SD : 8gb
GPU : Imagination Technologies PowerVR SGX 540
Display Size : 10.1inch - 1024x600Resolution
Screen Density : 90 ppi (160dpi)
Refresh Rate : 82.34 Hz
Back Camera : 1.9 MP(some apps : 2Mp)
Front Camera : 0.3 Mp
System :
Model : M1002B
Manufacture : Rockchip
Android : 4.2.2
Api Level : 17
Kernel : 3.0.36+20131118....
Compilation : V1.01.JDQ39...
Processor :
Processor : Rk30board
Instructions sets : armeabi-v7a, armeabi
Max Freq : 1200Mhz
Gpu :
Model : PowerVr SGX 540 + Output (Mini Hdmi 1920x1080)
Vendor : ITechnologies
OpenGL Version : OpenGL ES 2.0
Advanced Info:
Viewport size : 2048 x 2048
Sensor :
Freescale Semiconductor
Power C : 0.2mA
Max Range : 39.24
Resolution : 0.15328126
Other chips plus board descriptions :
RK30Board
Rockchip616
S-ilead GSL3680
uP6636Q-PGK38L
Wifi lost number of the chip, was realtek with tv in it.Must make new picture to find out but seemed pretty standard wifi Bgn chip.
Buttons : 3 - Power-Volume up/down
Ports : Mini USB2 OTG - Mini Hdmi(DD-DD5.1) - HeadphoneJack - Mic - MiniSD Card slot-
Rooted.
Roberto.
Were you able to figure this out?
I will try it and let you know if I have any problems? Thanks a lot.
Hi
i would flash my old tablet with rom stock, but i not found there.
can you help me ?
antutu data :
Brand : ALPS
model : SH-7208
Board : N932
Material : mt6572
Android : 4.2.2
CPU : VFPv4,Neon (dual core ARMv7 Processor)
GPU : Mali-400 MP
thanks for your help
Hello
I have this Honor 6a
Device
--------------------------------------------------------
Device Name : Honor 6A
Model : DLI-L22
Manufacturer : HUAWEI
Device : HWDLI-Q
Board : DLI-L22
Hardware : qcom
Brand : HONOR
Build Fingerprint : HONOR/DLI-L22/HWDLI-Q:7.0/HONORDLI-L22/C432B129:user/release-keys
USB Host : Supported
System
--------------------------------------------------------
Android Version : 7.0
Version Name : Nougat
Released Date : srpna 22, 2016
Code Name : Nougat
API Level : 24
Security Patch Level : 2018-08-01
Bootloader : unknown
Build Number : Delhi-L22C432B129
Baseband : MPSS.JO.2.0.c1.7-00006-8937_GENNS_PACK-2.97936.1.100110.1
Java VM : 2.1.0
Kernel : 3.18.31-gb19213b
Language : czech (cs_CZ)
OpenGL ES : 3.2
Root Access : Yes
SELinux : Enforcing
Treble : Not Supported
Seamless Updates : Not Supported
CPU
--------------------------------------------------------
Processor : ARMv7 Processor rev 4 (v7l)
CPU Architecture : 4 x 1,40 GHz
4 x 1,09 GHz
Supported ABIs : armeabi-v7a, armeabi
CPU Hardware : Qualcomm Technologies, Inc MSM8937
CPU Type : 32 Bit
CPU Governor : interactive
Cores : 8
CPU Frequency : 768 MHz - 1401 MHz
GPU Renderer : Adreno (TM) 505
GPU Vendor : Qualcomm
GPU Version : OpenGL ES-CM 1.1
The bootloader is locked and the unlock process is not available now (not unlock code).
Can somebody help with the root exploit to gain super su?
I tried Kingo Root, Framaroot, I386 root and many other expoits, but none work.
Thank for any tips.
Michal
Anyone had any luck rooting this phone? I've had updates, so mtk-su didn't work when I tried it, but I'm anxious to know if it works on a clean factory install.
If you have any experience with this phone please share!
Thanks,
Karl
Also here's the device info:
Device Info 3.2.4 Date Created 2021-10-09 21:02:45 Device -------------------------------------------------------- Device Name : Wiko Ride 3
Model : Wiko U614AS
Manufacturer : TINNO
Device : U614AS
Board : U614AS
Hardware : mt6762
Brand : WIKO
Build Fingerprint : WIKO/U614AS/U614AS:11/RP1A.200720.011/1629894660:user/release-keys USB Host : Supported CPU --------------------------------------------------------
SoC : u614as (no) no
Processor : U614AS
CPU Architecture : 4 x 2.00 GHz 4 x 1.50 GHz Supported ABIs : arm64-v8a, armeabi-v7a, armeabi CPU Hardware : MT6762V/CA CPU Type : 64 Bit CPU Governor :
Cores : 8
CPU Frequency : 400 MHz - 2001 MHz GPU Renderer : PowerVR Rogue GE8320
GPU Vendor : Imagination Technologies
GPU Version : OpenGL ES 3.2 build [email protected]
Random Access Memory ------------------ Total : 2829.0MB Available : 765.0MB Used : 2024.0MB Used Percentage : 72% System Storage ------------------ Total : 1.58GB Available : 0.00GB Used : 1.58GB Used Percentage : 100% Internal Storage ------------------ Total : 23.45GB Available : 3.27GB Used : 20.17GB Used Percentage : 86% External Storage ------------------ Total : 29.79GB Available : 20.37GB Used : 9.43GB Used Percentage : 31% Camera -------------------------------------------------------- Camera - 0 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.519mm Camera - 1 ------------------ Position : Front Mega Pixels : 3.7 MP Resolution : 2560x1440 Focal Length : 2.25mm Camera - 2 ------------------ Position : Back Mega Pixels : 1.9 MP Resolution : 1600x1200 Focal Length : 1.928mm Camera - 3 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.54mm
did you get your boatloader unlocked ? i saw an ad for flashing wiko system software cant find the link, it would be great to have a dump or stock.zip
MT6765_Android_scatter
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
this needs to be edited..
try mtkclient on windows to unlock boatloader igot a dump made give me a reply thanks ed ?
I'll have to factory reset to get a stock dump for you, I might have time to pull it off tomorrow if you really need it, I've been wanting to try it anyway to see if mtk-su will work before any updates come through
And no, it says unrecognized command when I execute the flashing unlock command
i just have a tablet p.c so I couldn't get python and mtkclient to work for some reason, but after reading some more, nck-dongle and some other box dongle s offer the boatloader unlock. get the boot.img flash magisk - unlock boatloader for mt8762 ? right
mtk-su isn't going to work I tried it, it was patched after 2019 on most phones
those are 50 bucks and up, there's a slew of dongles on the market, theres a couple other no-box mtk boatloader unlock tools I'm looking for, if they don't work the phone is patched and won't unlock