I have been a fan of otterbox cases for a long time, and used them exclusively until this case. The construction is generally what you would expect from Otterbox, but there are two issues with the case:
1) The case itself is very recessed from the edge of the phone. The phone itself sticks up above the case by a couple of millimeters, and the fit is not very snug/secure. This also means that the edges of the phone are very exposed, and I could see a side drop off of a desk or table as potentially disastrous.
2) This is my biggest complaint and a clear lack of QA. The cutout for the S-Pen covers the pen itself. Because of this, it is a chore to remove the pen from the case. The edges of the cutout are very high and not tapered at all, which means you can't just idly reach for the pen and let the case guide you in. This coupled with the fact that the case covers the port on the pen means that you have to put in some effort to even get the pen out of the case. To be clear, the pen will still come out, but you have to pull it past/around the soft rubber of the case. I confirmed this was a design issue by testing 3 other symmetry cases, all of which had the same flaw.
At least the case works with wireless chargers and Samsung pay, so that is a bonus. Will I use Otterbox products in the future? potentially, but not this one.
[URLhttp://www.otterbox.com/en-us/galaxy-note8/symmetry-series-case/sam28-galaxy-note8.htmlURL]
Sent from my SM-N950U using XDA-Developers Legacy app
Just got one from Wal-Mart and order 2 other cases on eBay. The otter box feels cheap
Yeah I finally got rid of mine I found it quite disappointing
Sent from my SM-N950U using XDA-Developers Legacy app
I'd be pissed about a $50 case that seems to work as well as my $4 case (discounted from $15)
how responsive are the buttons? I had this case for my s7 edge and they required some force to get feedback. they weren't tactile at all
mrcartagena2000 said:
I have been a fan of otterbox cases for a long time, and used them exclusively until this case. The construction is generally what you would expect from Otterbox, but there are two issues with the case:
1) The case itself is very recessed from the edge of the phone. The phone itself sticks up above the case by a couple of millimeters, and the fit is not very snug/secure. This also means that the edges of the phone are very exposed, and I could see a side drop off of a desk or table as potentially disastrous.....
Click to expand...
Click to collapse
I can confirm 100% that this is an issue, 3 days after I got my Note 8, which due to tmo sending early, was 5 days before official launch, My note 8 suffered catastrophic damage WITH this case on.
I put the case on it at the store, before it even left the table.
I have not needed a screen protector or ever needed to utilize my handset insurance as long as I've owned cell phones(nearly 15 years).
Moved into a new place with stone counters just a week before.... fumble phone, instead of letting it fall to the ground and hit the area rug, which would probably have done no damage at all. I tried to catch the phone and instead bopped it, it rolled over face down and slide across the edge of the stone counter across the exposed portion of the screen...
It took me a week and a half of fighting with insurance company to cover it because as far as they were concerned i was lying about the phone i owned because it hadn't been officially launched yet.......
I have this case as well... it's causing my screen protector to lift up, so far on #3. It's protected my phone several times from falls although. The buttons seem to stick on occasion as well. Also, the rubber after pulling it on & off several times is becoming loose. Overall ****ty case
I have used Otterbox cases for years. Until meow, my only beef is the built-in screen protectors. It appears that the newer models have omitted, because of their lack of effort/curved screens.
The OB Defender looks decent, but lacks screen protector and still has a holster, which I need/want.
However this is the first time in years that I have gone with something different.
I am using the Supcase Unicorn Beetle case. IMO< just as good, if not better. The stock screen protector fits nice and seems to be made of decent material. Does not have the annoying gap/super plastic feel like the OB has.
It also costs half as much.
Related
I am going to get a s4 soon, and I am wondering if I will need to get a case. Currently on the charge, and when I bought it I got the thicker case vzw offered. Within two weeks it was off, and I have used the phone naked ever since. I have dropped it countless times onto tile and concrete, and the only damage is a few scratches on the back cover and dents in the part of the bezel that extends past the screen (raised edge).
I have read that the s4 is quite fragile. Based on the above, should I get a case? If so, can I get the smallest one available, or should I opt for something bigger?
Sent from my SCH-I510 using Tapatalk 2
JihadSquad said:
I am going to get a s4 soon, and I am wondering if I will need to get a case. Currently on the charge, and when I bought it I got the thicker case vzw offered. Within two weeks it was off, and I have used the phone naked ever since. I have dropped it countless times onto tile and concrete, and the only damage is a few scratches on the back cover and dents in the part of the bezel that extends past the screen (raised edge).
I have read that the s4 is quite fragile. Based on the above, should I get a case? If so, can I get the smallest one available, or should I opt for something bigger?
Sent from my SCH-I510 using Tapatalk 2
Click to expand...
Click to collapse
It's all going to be up to your personal preference. Based on what you said, I would highly recommend a case. The S4 is pretty damn fragile and it's just not worth the risk if you have a history of dropping your phone. As for the size of the case, that is going to be up to you. Obviously the smaller/minimal cases will offer less protection. I like as little bulk as possible so that's fine with me and I have the Spigen Neo Hybrid on my S4 right now. Also consider a screen protector (plastic, tempered glass, etc.). Costly purchases but worth the $250+ investment into your new phone imo. :good:
Dropped mine one time on flat tile from hip height and screen cracked and would not display an image.... Get a case.
Sent from my SCH-I545 using Tapatalk 4 Beta
I use a speck Candyshell and it doesn't add much bulk or weight to the phone at all, thats my recommendation. The smaller and light silicone cases just don't offer the kind of protection a hard case does. The Candyshells are on the more expensive side, but you can get them on Amazon cheaper than you can on Speck's website
dust. said:
It's all going to be up to your personal preference. Based on what you said, I would highly recommend a case. The S4 is pretty damn fragile and it's just not worth the risk if you have a history of dropping your phone. As for the size of the case, that is going to be up to you. Obviously the smaller/minimal cases will offer less protection. I like as little bulk as possible so that's fine with me and I have the Spigen Neo Hybrid on my S4 right now. Also consider a screen protector (plastic, tempered glass, etc.). Costly purchases but worth the $250+ investment into your new phone imo. :good:
Click to expand...
Click to collapse
How do you like that case? I have the white on order (as well as the glass screen protector) and was wondering if it looks as good as it does on Spigen's website.
If you're ever going to drop your phone than a case is a good idea.
If it doesn't offer protection to the four corners it's not worth it.
I saw a brand new GS4 dropped from waist height onto asphalt and it bent the metal rim around the screen and messed up the front facing camera.
The guy had a case on it, but it was a plastic sleeve with a stand that didn't cover the corners.
As far as screen protectors go I think they're a waste of money. The phone has gorilla glass. Unless you find yourself regularly working with materials that are actually hard enough to scratch the screen, it's just going to be another layer for glare and bubbling imperfections.
I had a Droid Charge for 2 years and only scratched it once, when I had some marble dust under my finger nail.
JIHAD MY BOI.
I currently have an Incipio DualPro Shine on my S4. Offers pretty decent protection without being stupid thick, like the otterbox.
Sent from my SCH-I545 using xda premium
Yeah I don't have any scratch problems and don't care about cosmetic damage. The main thing I'm worried about is functionality breaking, like screen shatter or sensor damage.
Sent from my SCH-I510 using Tapatalk 2
I found the phone without a case too slippery and knew it would be dropped. I got the urban armor gear case and love it. IMO it is the the best mix of protection, slimness, and cool factor
Sent from my Galaxy S4
probably a good idea
I have a screen protector and a casemate toughcase on mine. A week or so ago I dropped the phone onto concrete from thigh level. I was scared as all could be that it would be cracked cause it sound like it hit hard, and it hit bottom first. Nothing happened luckily. I was wondering about the protection quality of that case, so far so good. It's a two piece case, and can be had for around 20 something bucks on amazon. I recommend getting a case.
I use a combination of a screen protector with the Spigen Slim Armor series case. Phone fits in it like a glove and adds very little bulk. I've dropped it a few times and it's survived with no issues. The case is a double layered rubberized with a plastic cover for looks, and it looks very sleek. It's worth checking out for sure. They're also on sale on Amazon for $14.99 at the moment, add a screen protector (also on sale for 6.99 and comes with 2) and some other random item and you can get the free shipping on orders over $25. Leaving you a link for the case and protector.
NOTE: When I added the protector to my cart and went to check out I noticed it added a iPhone 5 protector even though I was on the GS4 page, I had to remove and add a few times before it correctly showed the GS4 protector. Just a FYI.
EDIT: Well I can't post links because I'm under 10 posts. Sorry, they're just a quick Google search away though!
Get a case. I love having my phone naked, especially with my S4 because of how slim and lightweight it is - but therein lies the problem. I use an Otterbox Commuter case at work. Previously - while the Otterbox cases are good quality - I have refused to use them due to the bulk they add. However the S4's Commuter Otterbox case is fairly slim for a rugged protection case, so I decided to give it a go. It's really not bulky. The Defender on the other hand it way too much bulk for my taste.
I work in a transportation hub - around extra hard concrete floors, moving belts and machinery, metal grating docks, etc. - basically a rough environment. The first day I got the phone I went without a case, but with how slim and lightweight it is all I kept thinking was "I'm gonna drop it, it's gonna break, I'm gonna drop it, it's gonna break". So after work, I went and grabbed the Otterbox from my local Verizon store. I use it at work, and when I get home to my nice, soft, carpeted environment - I immediately take the case off.
A little over 2 weeks after I got it, I woke up and rolled over to check the time on my phone. It slipped out of my hands, fell about a foot and a half, and as it fell it hit against the metal rail on my bed (the frame that your mattress sits on) and landed on my carpeted floor. Grabbed it thinking it would be perfectly fine - it was a very short fall, it landed on carpet, and just grazed the rail. Took a look at it and the frame around the front of the phone, the faux metal one, had a huge gouge in it. I was very disappointed by this, but figured it was a freak accident. About a week ago, I got the Samsung Wireless charging pad for my phone. Set it up next to my bed, and as I was testing it out, I lifted one end of the charging pad while the phone was still on it, creating a slope. The Samsung Wireless Charging Pad doesn't have much of a grip to it, so it slipped off and made that same 1 1/2 foot fall from my bed to my floor, again grazing the metal rail on the way down. Again, I have another gouge in it. While this is a metal rail, it does not have any "sharp" edges to it. The edge itself is rounded, so it's gentler on objects that it comes in contact with, and it is covered by a bedskirt, again, helping to soften the blow should anything hit it.
Having learning my lesson (kind of) with the same freak accident happening with my phone hitting my bed in just to right way during a foot and a half drop (I have never dropped any of my previous phones...from my bed), I am looking into lightweight Carbon Fiber Skins to hopefully add a small layer of protection and sadly, I am resorting to also wrapping the bed frame in foam because I am stubborn and still refuse to use a case when I am not at work.
The point of this long drawn out story is that in my experience - as beautiful as this phone is, and as much of a shame as it is - I highly recommend a case of some sort. Unless you want to be like me and start padding the environment around you. The phone does not seem to handle falls well, even over short distances.
---------- Post added at 03:30 AM ---------- Previous post was at 03:20 AM ----------
As an additional note, you don't need to go all out with a massively bulky case. I recommend something with dual layers though, the internal rubberized layer that helps absorb the shock from a fall and the outer plastic shell that protects against the dents/damage/etc.. While I have the Otterbox, I plan on making the jump to the Spigen Slim Armor Case, it looks much more beautiful than my Otterbox and slimmer too. I currently use their Glas.tR Screen Protector, having found that the glass gives it the naked feel that I love while still provided amazing protection for the screen. Their products really are top notch, high quality, slim, and don't take away from the aesthetic of the phone.
I'm using a blue android clone army case from cruzerlite
sigmaxaa said:
How do you like that case? I have the white on order (as well as the glass screen protector) and was wondering if it looks as good as it does on Spigen's website.
Click to expand...
Click to collapse
I really like the case so far. It adds a bit of bulk though on an already big phone so it can be a bit cumbersome at times to reach stuff on the screen with one hand (I have pretty small hands lol) but I think it looks great and I am very satisfied with my purchase.
I had mine naked for a week and was scared, it slid out of my pocket at the gym a couple times but onto a rubber floor, so no damage...got tired of being careful and threw on an otterbox commuter..loving it, feels more sturdy and i dont have to worry about it.
had a commuter on my s3 and that thing hit the pavement a good 3-5 times from about 5-6 feet up, no damage at all
Don't Hesitate
After about a week and a half of fretting about dropping it, scratching it, or otherwise, I was very relieved when I finally broke down and got a case. I'm using a semi-thick plastic/silicon case from CruzerLite.com. It's well worth it, looks cool (I actually get a lot of questions and compliments on it's design), and it's quite functional. It also doesn't add a lot of bulk! CruzerLite.com, check it out!
I have not used a case yet don't like the extra thickness. I've dropped it pretty good a few times but only dented the metal. Guess I been lucky
Sent from my SCH-I545 using xda premium
Heart Foxx said:
After about a week and a half of fretting about dropping it, scratching it, or otherwise, I was very relieved when I finally broke down and got a case. I'm using a semi-thick plastic/silicon case from CruzerLite.com. It's well worth it, looks cool (I actually get a lot of questions and compliments on it's design), and it's quite functional. It also doesn't add a lot of bulk! CruzerLite.com, check it out!
Click to expand...
Click to collapse
I got the bug droid exo from their website. There costumer is great
Sent from my SCH-I545 using Tapatalk 2
You need one
I got the otter box for mine, love it!
JihadSquad said:
I am going to get a s4 soon, and I am wondering if I will need to get a case. Currently on the charge, and when I bought it I got the thicker case vzw offered. Within two weeks it was off, and I have used the phone naked ever since. I have dropped it countless times onto tile and concrete, and the only damage is a few scratches on the back cover and dents in the part of the bezel that extends past the screen (raised edge).
I have read that the s4 is quite fragile. Based on the above, should I get a case? If so, can I get the smallest one available, or should I opt for something bigger?
Sent from my SCH-I510 using Tapatalk 2
Click to expand...
Click to collapse
I too had a Charge before my Galaxy 4. I had a silicon case and I still dropped it all the time. It once hit the pavement with such force that it opened and the battery fell out....it still worked. I cannot imagine this kind of resilience on the s4.
However, I found what I think is a great case - it is made by Speck - a very thin harder plastic with a rim to protect the screen AND some kind of rubber ribs all over the back and the sides so you have plenty of grip. I've not dropped the phone yet and I know this case is a good part of the reason. I have the crummy plastic screen cover from Verizon and will be putting a better one on in the next day or two. I got the Speck case at Best Buy but have also seen it at Amazon http://www.amazon.com/Speck-Product...8-3&keywords=speck+case+for+samsung+galaxy+s4
[url]http://www.amazon.com/Speck-Products-CandyShell-Samsung-Galaxy/dp/B00C27R8MM/ref=sr_1_3?[/url]
ie=UTF8&qid=1373786228&sr=8-3&keywords=speck+case+for+samsung+galaxy+s4
Then I was still left without a clip for the occasional times when I don't have a purse or pockets. I found a Nitze black foldover case with a clip in the back. It is made with elastic in the middle so you can carry your phone and credit cards. I cut out the elastic and am now able to fit the S4 WITH the Speck case still on it. (Sorry but I can't find a link for that case now).
Hope this helps. As you can tell, I really love the Speck and it comes in several colors.
I've been searching for a while, and have come across dozens of threads complaining about the Defender's screen protector (and I agree..they suck, lol), or whether this protector or that protector will work with the Otterbox...but nothing yet of the durability of the tempered glass screen protectors in place of the entire Otterbox case altogether.
I had gone years and years without running any cases at all without an issue, and only started running basic plastic screen protectors on my last few phones. I'd swap out the protectors every month or so when they got scratched up, and I was perfectly happy with that setup.
Then I got a S4 Active last year...put my plastic protector on it, and broke the screen within the first week. Got it warranteed out due to water intrusion, and broke the screen on the replacement phone within about 12 hours. I got nervous going forward, and immediately put an Otterbox Defender on my Note 3 when I got it a couple months ago (like literally, took it out of the Samsung box, and straight into an Otterbox, lol). I had read about dust intrusion issues with the Otterbox, and thus left the factory "protector" on the screen...and glad I did, because this thing has sucked in all kinds of dust and crap into it. Seems like I'm pulling it apart every couple of weeks to clean it out, and now (not surprisingly), the rubber outer is a loose fit.
The other problem now is that I've wanted to get the Samsung home dock, which won't work with the Otterbox installed (and from what I'm gathering, virtually every other case is going to be an issue). I tried adding the wireless phone back...nope, doesn't fit with the Otterbox. Decent car dock other than the "fits absolutely everything!!!" $20 garbage universal car mounts? Nope...doesn't go wide enough for the Otterbox. Tried adding one of the 5-in-1 adapters to get HDMI out and USB host...nope, doesn't fit with the Otterbox installed...and taking the phone out multiple times means the rubber outside fits less and less every time....
In my case, I couldn't care less if the sides/back of the phone gets dinged up/scratched, as it's a work phone that gets turned in when we upgrade so resale value means absolutely nothing to me. Keeping dust out obviously isn't something the Defender is good at. So it's basically just a very oversized screen protector to me now.
So...as far as breakage protection goes, how does the tempered glass protectors compare to something like the Defender case, or other similar bulky plastic cases go? I'm really thinking about just dumping the Otterbox altogether, putting on a tempered glass protector, and calling it good. If it means anything, I don't consider price to be an issue. I'll gladly dump $100 into a protector if it saves my phone from a drop.
urbex said:
I've been searching for a while, and have come across dozens of threads complaining about the Defender's screen protector (and I agree..they suck, lol), or whether this protector or that protector will work with the Otterbox...but nothing yet of the durability of the tempered glass screen protectors in place of the entire Otterbox case altogether.
I had gone years and years without running any cases at all without an issue, and only started running basic plastic screen protectors on my last few phones. I'd swap out the protectors every month or so when they got scratched up, and I was perfectly happy with that setup.
Then I got a S4 Active last year...put my plastic protector on it, and broke the screen within the first week. Got it warranteed out due to water intrusion, and broke the screen on the replacement phone within about 12 hours. I got nervous going forward, and immediately put an Otterbox Defender on my Note 3 when I got it a couple months ago (like literally, took it out of the Samsung box, and straight into an Otterbox, lol). I had read about dust intrusion issues with the Otterbox, and thus left the factory "protector" on the screen...and glad I did, because this thing has sucked in all kinds of dust and crap into it. Seems like I'm pulling it apart every couple of weeks to clean it out, and now (not surprisingly), the rubber outer is a loose fit.
The other problem now is that I've wanted to get the Samsung home dock, which won't work with the Otterbox installed (and from what I'm gathering, virtually every other case is going to be an issue). I tried adding the wireless phone back...nope, doesn't fit with the Otterbox. Decent car dock other than the "fits absolutely everything!!!" $20 garbage universal car mounts? Nope...doesn't go wide enough for the Otterbox. Tried adding one of the 5-in-1 adapters to get HDMI out and USB host...nope, doesn't fit with the Otterbox installed...and taking the phone out multiple times means the rubber outside fits less and less every time....
In my case, I couldn't care less if the sides/back of the phone gets dinged up/scratched, as it's a work phone that gets turned in when we upgrade so resale value means absolutely nothing to me. Keeping dust out obviously isn't something the Defender is good at. So it's basically just a very oversized screen protector to me now.
So...as far as breakage protection goes, how does the tempered glass protectors compare to something like the Defender case, or other similar bulky plastic cases go? I'm really thinking about just dumping the Otterbox altogether, putting on a tempered glass protector, and calling it good. If it means anything, I don't consider price to be an issue. I'll gladly dump $100 into a protector if it saves my phone from a drop.
Click to expand...
Click to collapse
Ok so first off...
If your interested in wireless charging, you can indeed get wireless charging without buying a new backplate. Myself and several others here on XDA use this one.
It installs on top of your battery UNDER your current backplate.
Tempered screen protectors are awesome. They will protect your screen against smashing, falls, chips, etc... They will not protect your bezel, backplate, corners, etc.
My suggestion to you is this.
Get this tempered glass screen protector, and it's no where near $100.00
Get this ultra slim case also
Or get this Bumper instead of a case
The Spigen case is one of the thinest, best looking slim cases I have ever seen. Another one would be the Note 3 Neo Hybrid, search on Amazon for it. What I'm getting at is that you should have SOME protection at very least from small or moderate drops. These cases will minimize the damage, or completely save your phone while not adding any size or bulk to it. I have that tempered glass screen protector. It's very well made and is like a rock.
*Keep in mind you will need a Qi Wireless charger pad if you purchase that wireless receiver for your Note 3. They are all over Amazon and are very inexpensive. All these accessories I have mentioned will work with wireless charging quite fine. Here is the one for my Note 3.
.
Hope this helps, good luck
Cool, thanks!
Ordered that glass screen protector yesterday, and was looking at some of the wireless charging options. I had tried a couple of those add in coils with my S4 Active, but didn't like that they all bulged the back cover causing it to unsnap...I figured the Samsung charging back was actually the perfect solution. It's really not a big deal now, as my original intention was to go wireless to get around the problems with the Otterbox case. Though I may still go back down that road, as I'm seeing a few car mounts being released with wireless charging built in now.
Am gonna order this case from amazon as soon as I get it I will post review
http://www.amazon.com/gp/product/B00H9Y5PYG/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2CKSBAXB5C1MY
I have a Spigen Tempered Glass protector, and numerous types of cases for protection.
I stupidly one day wasn't using a case, and my phone fell out of my shorts pocket and hit the ground. Hard. Screen down. I was very scared. I flipped it over, and the screen was fine, but the edge of the lower part of the phone, the chrome plastic surround was dented and a small corner of the protector cracked a tiny bit.
The protector definitely saved the screen but my phone is now dented. It has not been without a case since.
If you don't want something big but still want great bumper and shock protection try diztronic TPU cases. You can remove the phone all the time, it doesn't stretch out, and it looks great. If you want a slightly bigger case, UAG make great one price durable cases similar to Otterbox but they don't stretch. Spigen also has a great Slim Armor case if you want something larger, but not bulky.
Also, get a Tempered Glass protector. Obviously.
Sent from my SM-N900W8 using Tapatalk
I did receive this case from Roocase in return for providing a review. That in mind, my initials thoughts were that although it was packaged nicely, in a static-free bag, it looked kind of cheap for the price range (the actual price on Amazon, not the price I paid)... I removed the case from the package and the journey to actually get the case apart and installed on my phone began. Like other reviewers, I had a heck of a time getting the case taken apart and then actually installed on the phone. It took a little bit to realize that you needed to install the front on the phone first, then snap the back into place. To be fair, with a little practice, the installation is not too difficult. A week in, it is still quite tough to remove the case.
I was using this case after using Spigen Slim Armor case. My big gripe with that case is that the buttons are almost impossible to differentiate without looking at them, and I find myself adjusting the volume when trying to wake the phone from sleep. This is definitely not a problem with the Roocase. The button covers are large and well textured. No problem there.
I also really liked that I could see the back of my phone through the polycarbonate back. Nice touch Roocase.
I have never been a big fan of built in screen protectors. I have already installed one on my phone, and while I haven't had the problem of my existing screen protector peeling off at the edges, I have noticed a decrease in the sensitivity of my screen, and I don't like the feel of the plastic screen protector built in to this case.
The port covers are a nice touch, but they are really difficult to get open. The USB cover also tends to cause some of my looser micro-USB cables to fall out while charging (like the one on my car charger), which is a pain. It also increases the security of the connection for some of my cables, so it's kind of a mixed bag there. After having them open for an extended period of time, the covers tend to stay open for a while, and I wouldn't be surprised if the problem only gets worse over time.
The case does seem to be built like a tank. I wouldn't be even remotely worried about dropping my phone with it in this case. I have used an Otterbox Defender on previous phones, and I would rank this one just as high on the protection level spectrum.
Overall I like the case. I like the flat back sometimes, but sometimes I do get a little annoyed by the above niggling issues and go back to my Spigen, or my CM Naked Tough case. If you need something that is built like a beast and like using the Otterbox Defender, then I would recommend the case. Otherwise, I would have a hard time recommending it at this price point ($19.98 plus free shipping).
I gave this 3 stars on Amazon.
Love the pictures.
Pictures? Huh?
Help to remove the roocase of Nexus 6 easily
"A week in, it is still quite tough to remove the case."
How to remove the case with ease? Please advise.
Has anyone tried any of the cheap tough/tank/rugged cases of ebay or from any of the chinese sites like the ones below? I know they're basically knock offs of more expensive cases, but wanted to see if anyone is using them and if they're decent enough quality. I have a thin clear gel case at the moment which is fine for me as I am generally careful with my devices but fancied the option of having something with more sturdy protection.
http://www.ebay.co.uk/itm/182054056073?_trksid=p2060353.m1438.l2649&var=483155764923&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.co.uk/itm/401042083390?_trksid=p2060353.m1438.l2649&var=670633918779&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.co.uk/itm/182056506581?_trksid=p2060353.m1438.l2649&var=482988547752&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.co.uk/itm/172108484090?_trksid=p2060353.m1438.l2649&var=471029139174&ssPageName=STRK%3AMEBIDX%3AIT
Ended up ordering one of these, great fit and quality, feels solid and quick and easy to put on/take off. Delivered really quickly and came with one of those small stylus that clip into the headphone jack and a film screen protector(I didn't fit it), which unfortunately like a lot of them doesn't fit the full screen.
http://www.ebay.co.uk/itm/391462198543
Sent from my SM-G930F using Tapatalk
I had two of those cases for my Nexus 5. Came with the same stylus and everything. One of them had the flip cover, but it ended up breaking off.
It's a pretty good case. I generally just use my nexus 5 around the house these days, using those cases, my phone has no visible damage. Though, bear in mind that the Nexus 5 had a lot less glass built into it.
EasyDanger said:
I had two of those cases for my Nexus 5. Came with the same stylus and everything. One of them had the flip cover, but it ended up breaking off.
It's a pretty good case. I generally just use my nexus 5 around the house these days, using those cases, my phone has no visible damage. Though, bear in mind that the Nexus 5 had a lot less glass built into it.
Click to expand...
Click to collapse
Yea I had the same type for my Galaxy S4, always wanted the one with the flip/door ('Armour view' I think it was called) cover on it but never got it. I had read about the door hinge being a bit fragile and prone to breaking also.
This one for the S7 is great though, really nice sturdy fit and cheap as well. Its not quite as rugged as the ones in the links I look at but its handy as the case can be taken off and put back on quickly if needed, whereas the other ones are really intended to be put on and left on.
you can check my reviews , for now , i love my ottrbox and a cheaper product from amazon
https://www.amazon.com/dp/B01AMZ97KG
I've got the Artech Little Rock. It's cheap ($29, and a 20% off coupon put it at about $24) and it's as rugged a case as I've ever had. The bezel is a bit hard to snap in, but that only makes it secure the phone that much more
Which case for the s20 ultra is the absolute thinnest? I used to have the TOZO on my s10+ which was paper thin and loved it but they don't make one for s20 series. Any other recommendations?
Pitaka Air Case. Unsure, if it is made for the s20. Mag Case is a little thicker but has metal plates embedded.
Air case is the absolut thinnest, imo.
if your just aiming for scratch resistance maybe go for a skin?
jamike77 said:
Which case for the s20 ultra is the absolute thinnest? I used to have the TOZO on my s10+ which was paper thin and loved it but they don't make one for s20 series. Any other recommendations?
Click to expand...
Click to collapse
https://www.aliexpress.com/item/400...earchweb0_0,searchweb201602_,searchweb201603_
This Totallee thin case is great... I've had this case on my last three phones, including the s20+. Zero drop protection, obviously, but all around scratch protection, and the thinnest case I've come across. Highly recommended.
https://www.amazon.com/totallee-Gal...pY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1
Pitaka, it's expensive but worth it. Won't come off and doesn't feel flimsy like thin TPUs.
Unfortunately, like thin TPUs offers little protection especially for the screen but if you're into thin you're already aware of that.
digitaljeff said:
if your just aiming for scratch resistance maybe go for a skin?
Click to expand...
Click to collapse
I would but ultimately also want scratch and dent protection around the corners which a skin doesn't cover. A super thin case have proven the best option for me as I hardly ever drop my phone and if it happens it falls on a hard wood floor at home where a thin case suffices.
If you want something high quality and not copied / ripped off like this strange YouTubers cases, you want this:
https://www.ipitaka.com/collections/air-case-for-s20
Baseus wing case. I have used it on several phones and it is very thin.
https://www.baseus-cn.com/baseus-wing-case-for-samsung-galaxy-s20-plus-galaxy-s20-ultra-galaxy-s20/
Spigen Air is pretty good too, and inexpensive.
The Samsung LED Cover case is very very minimal, but helps even out the camera bump on the back. Gimmicky LEDs but still fun to show off. Too expensive for many though.
bare-cases.com
Use this on my S20 Ultra and can't tell there's a case on (apart from the feel in texture)
Just received the Baseus wing case, NEVER have a had a case so thin!
Good day. I have been using since my S8 the MNML cases. Didn't found any thinner than this, 0,35mm
https://mnmlcase.com/products/galaxy-s20-mnml-case?variant=31759092023375
I purchased a carbon fiber case off of Ebay, great quality and the most minimal case I've tried to date. It unfortunately doesn't protect the front screen well but you have to give up some things.
http://https://www.ebay.com/itm/254320840338
X-Level Ultra Thin is 0.18mm
Half the thickness of most of the cases above .. grip is nice .. $10 from aliexpress ... similar material to my totallee
Do any of these thin cases offer lip protection?
synxx said:
bare-cases.com
Use this on my S20 Ultra and can't tell there's a case on (apart from the feel in texture)
Click to expand...
Click to collapse
Bare cases are trash, and their customer service is equally trash. The small strip of the case that runs above the volume key cutout is flimsy. I'm on my 2nd bare case since the first started to deform after a couple of weeks. The 2nd case has now done the same. I bought one for my sister's s9, and the edges of the case of the start began to deform after a couple of weeks too.
Bought the Samsung Silicone Cover, it's a bit thicker than the barecase, but at least I can be certain it won't break on me after 2 weeks.
https://www.amazon.co.uk/gp/product/B083M3B2SW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
downbringer said:
Bare cases are trash, and their customer service is equally trash. The small strip of the case that runs above the volume key cutout is flimsy. I'm on my 2nd bare case since the first started to deform after a couple of weeks. The 2nd case has now done the same. I bought one for my sister's s9, and the edges of the case of the start began to deform after a couple of weeks too.
Bought the Samsung Silicone Cover, it's a bit thicker than the barecase, but at least I can be certain it won't break on me after 2 weeks.
https://www.amazon.co.uk/gp/product/B083M3B2SW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Really? Can't say I've had the same issue's at all. Customer services admittedly are abit slow at responding but not as bad as any other. I was sent a S20 case instead of a S20 Ultra at first so got in touch and they responded within 3 days, polite and friendly and got the correct case sent out to me.
Havnt had any issues with the case deforming or edges breaking as you mentioned though and I've had it around 5 months now.
How long did you have yours before you noticed issues? Cant imagine it was literally 2 weeks.
synxx said:
Really? Can't say I've had the same issue's at all. Customer services admittedly are abit slow at responding but not as bad as any other. I was sent a S20 case instead of a S20 Ultra at first so got in touch and they responded within 3 days, polite and friendly and got the correct case sent out to me.
Havnt had any issues with the case deforming or edges breaking as you mentioned though and I've had it around 5 months now.
How long did you have yours before you noticed issues? Cant imagine it was literally 2 weeks.
Click to expand...
Click to collapse
My first one I noticed the thin strip deforming after maybe 3 weeks. The second one I paid more attention to, and honestly started deforming around 2 weeks in. Not immediately noticeable, but it will get worse over time.
I don't know with the Ultra being a thicker phone in general the case might be more resilient deforming in the same spot, but on my S20+ it is most definitely a design fault.
The first reply from their customer service was prompt enough, but then had to wait over a week for a reply after that and then a further 3 days for a response after that point. Their initial response was I must be keeping my phone in tight jeans or taking the case on and off, but neither of those things are valid. Delivery of the replacement took around a month. Whilst I appreciate that I'm not based in that cheery US of A. Delivery to the UK should not have taken that long.
Overall 3/10, emphasises form over function, and fails at longevity. Plus I couldn't feel the side buttons through the side of it.