Related
So I was trying to update my old energy ROM to ICS and I'm kind of hosed. Got instructions here: http://forum.xda-developers.com/showthread.php?t=1362759
Basically:
- Root your device
- Install a custom recovery
- Install the downloaded ROM .zip found in post #3
- Make sure to do a Factory Reset / Wipe before installing ROM
For the record, these steps are out of order. Steps 4 and 3 are switched and I didn't notice till it was to late. What I did next was do the factory reset and then try to re-install the ROM. Everything seemed to go fine until it was time for a reboot. Then it froze on the HTC logo.
Could use some ideas as to what my next move should be. Since it was a previous version of Energy ROM + Faux kernel, phone is definitely rooted, etc. Perhaps I should start over with a stock Gingerbread ROM?
jcllings said:
So I was trying to update my old energy ROM to ICS and I'm kind of hosed. Got instructions here:
...
Perhaps I should start over with a stock Gingerbread ROM?
Click to expand...
Click to collapse
Apparently I am also supposed to flash the kernel as per this thread which I've finally found:
http://forum.xda-developers.com/showthread.php?t=1645641
In order to find it, I had to search for it using Google as this forum software is so haphazard. Also not mentioned in the instructions. Will try this next if I can get at it through just the custom recovery.
Still wrong. Coming from GB and going to ICS you need to flash the ICS RUU in bootloader. I don't know how many times its been mentioned or how many other threads have been started because of this issue.
--------------------------------
It's Better To Fail At Originality
Than To Succeed In Imitation.
--------------------------------
First im not resbonsible for anything that can happen to your phone this what i do if it didnt work im not resbonsible.
If you are rooted via HTCDev S-On Hboot 1.490018 and up you need to Run a command prompt and flash the boot.IMG that comes with the ROM (if not included extract the ROM and search for its in the .Zip file then move that file into a folder in the Root lf ur C Drive put your phone into fastboot mode (remove battery then put it back then press lock/on button and the volume up button at the same time) then connect it to your PC and run command prompt press on start and search for cmd then run it and type the following :
Cd c:\android (or whatever you named the folder)
After that type:
Fastboot flash boot boot.IMG
After its done unplug your phone from ur PC reboot it and it should work perfectly (it may stay at the HTC Logo for 10-20 minutes)
HOPE IT WORKS ENJOY!
Sent from my GT-P7500 using XDA Premium HD app
Double0EK said:
Still wrong. Coming from GB and going to ICS you need to flash the ICS RUU in bootloader.
...
--------------------------------
It's Better To Fail At Originality
Than To Succeed In Imitation.
--------------------------------
Click to expand...
Click to collapse
Awesome. Thanks for the tip. Will see what I can make of it.
I notice that there is a file, PH85IMG.zip in the same directory as the modded ROM. The name isn't very descriptive. Clue?
jcllings said:
So I was trying to update my old energy ROM to ICS and I'm kind of hosed. Got instructions here: http://forum.xda-developers.com/showthread.php?t=1362759
Basically:
- Root your device
- Install a custom recovery
- Install the downloaded ROM .zip found in post #3
- Make sure to do a Factory Reset / Wipe before installing ROM
For the record, these steps are out of order. Steps 4 and 3 are switched and I didn't notice till it was to late. What I did next was do the factory reset and then try to re-install the ROM. Everything seemed to go fine until it was time for a reboot. Then it froze on the HTC logo.
Could use some ideas as to what my next move should be. Since it was a previous version of Energy ROM + Faux kernel, phone is definitely rooted, etc. Perhaps I should start over with a stock Gingerbread ROM?
Click to expand...
Click to collapse
I don't want to put down energy rom, but it hasn't been updated since the original leak, and the instructions were never clarified - he simply never explained the PROPER way to switch from gingerbread to ICS. ARHD gives a better explanation, but I think post #2 in the everything ICS thread gives the best and links to everything you should need..
You have to be careful anytime you are switching to a totally new OS. All the devices I know, switching from 2.1 to 2.2, or 2.2 to 2.3.. or to 4.0+.. it is USUALLY not just a "flash over the old OS".. just something to keep in mind for any of your other or future devices..
yuseiatlas said:
First im not resbonsible for anything that can happen to your phone this what i do if it didnt work im not resbonsible.
...
After its done unplug your phone from ur PC reboot it and it should work perfectly (it may stay at the HTC Logo for 10-20 minutes)
HOPE IT WORKS ENJOY!
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
I'm trying to get RUU now. When I tried the above earlier, got as far as the wirly Energy rings though but then it restarts.
Silentbtdeadly said:
I don't want to put down energy rom, but it ...
other or future devices..
Click to expand...
Click to collapse
Well as far as I know, it ain't like he is getting paid much so it would seem to be a miracle if any of this stuff gets updated. ;-) If I don't have this figured out by Tuesday, I'll use it as an excuse to get a new phone. This one has a crack or two in the screen anyways.
Still, even so I would MUCH rather get this one working again. 'specially since I'm between software gigs & cash is tight. If Energy ROM hasn't been updated and there's a better and/or more complete set of instructions maybe I should be looking at something else. Will continue hunting through these forums for info but can use all the help I can get since this forum software ain't exactly friendly. Probably best to see if I can get it back to stock on ICS and then work forward from there. Having said that, I have an RUU that I am working with, its: PH85IMG_RUBY_ICS_35_S_TMOUS_2.14.531.3_Radio_1.14.550L.17DC_30.78.550L.15_release_259626_signed.zip
Tried just flashing it but apparently there's more to it than that.
Latest problem is that I can't get it re-locked without enabling USB debugging. Can't do this since I don't have a working OS. Can it be done from CLI or recovery?
Uh.... hmmm... mysterious. Seems to have fixed itself. Will try a restart and see what happens.
jcllings said:
Latest problem is that I can't get it re-locked without enabling USB debugging. Can't do this since I don't have a working OS. Can it be done from CLI or recovery?
Uh.... hmmm... mysterious. Seems to have fixed itself. Will try a restart and see what happens.
Click to expand...
Click to collapse
I was saying that there are some other options, other roms, that have better instructions and have been updated fairly well.. that is all.
The thread I was talking about by glacierguy is here - it links to tons of resources and should answer most questions you may come up with. For example it has "Relock phone (fastboot oem lock)" you can issue fastboot commands while your phone is booted into the bootloader - so this has nothing to do with usb debugging..
There is tons of information here, I know it isn't absolutely organized, but there are a lot of guys here who tried to make the information as easy to find as possible..
Did u try to restart it again it usually takes a couple of times but anyway should either return to stock or use the RUU for the ICS ROM
Sent from my GT-P7500 using XDA Premium HD app
jcllings said:
Well as far as I know, it ain't like he is getting paid much so it would seem to be a miracle if any of this stuff gets updated. ;-) If I don't have this figured out by Tuesday, I'll use it as an excuse to get a new phone. This one has a crack or two in the screen anyways.
Still, even so I would MUCH rather get this one working again. 'specially since I'm between software gigs & cash is tight. If Energy ROM hasn't been updated and there's a better and/or more complete set of instructions maybe I should be looking at something else. Will continue hunting through these forums for info but can use all the help I can get since this forum software ain't exactly friendly. Probably best to see if I can get it back to stock on ICS and then work forward from there. Having said that, I have an RUU that I am working with, its: PH85IMG_RUBY_ICS_35_S_TMOUS_2.14.531.3_Radio_1.14.550L.17DC_30.78.550L.15_release_259626_signed.zip
Tried just flashing it but apparently there's more to it than that.
Click to expand...
Click to collapse
If you're.gonna flash that last file you mentioned, you need to rename it to PH85IMG, since its a stock ruu and not just a flashable Rom.
Sent from an Amaaaaaazing place :-D
Woohoo! I've succeeded in getting the aforementioned RUU installed. Should be much less of a problem from here forward.
yuseiatlas said:
First im not resbonsible for anything that can
...
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Of course you are responsible. Heaven forbid anyone should take responsibility for their own actions or anything crazy like that.
Since English may not be your first language, I'll be clear. I'm just kidding.
Silentbtdeadly said:
I don't want to put down energy rom, but it hasn't been updated since the original leak, and the instructions were never ...
other or future devices..
Click to expand...
Click to collapse
Now that I have the RUU, could use some examples of projects that are more up-to-date so that I can move forward.
jcllings said:
Now that I have the RUU, could use some examples of projects that are more up-to-date so that I can move forward.
Click to expand...
Click to collapse
Whoops, you covered this earlier. Will chase down the link and see where it goes.
jcllings said:
Now that I have the RUU, could use some examples of projects that are more up-to-date so that I can move forward.
Click to expand...
Click to collapse
If you want cutting edge(these both have features no other rom has added yet, and are very current update wise) and like the senseui, try remix's http://forum.xda-developers.com/showthread.php?t=1673609 or if you want with less sense and more of an aosp-ish feel go for his http://forum.xda-developers.com/showthread.php?t=1623184
ARHD is what is being used for the base for many roms because it is solid and bugless, energy has more features that he had included in his gingerbread rom.. I've heard good things about capromce, but I have no idea what features he has added that are or aren't included in the others..
Heheheh and its not my first language thats why you might see a lot of grammar and/or writen mistakes, just for the futur before you flash any new ROM Back-Up you current or the original ROM just in case something like this happen so you can restsore it without worrying and hope i helped
Sent from my GT-P7500 using XDA Premium HD app
Righteous! Up and running on Speed ROM 4.0. Thanks so much to everyone who collaborated. Copious mashing of the Thanks button.
LOOK http://bbs.gfan.com/forum.php?mod=viewthread&tid=7653470&pid=251597018&page=4&extra=#pid251597018
recovery 。。
http://pan.baidu.com/s/1eQjBXiq it work on my vs985 。
ROM
http://pan.baidu.com/s/1nt7Knd3
the recovery has some bugs。。。 but can work 。。。 we got roms now！！
so sorry for my English。。。
Anybody tried this, yet? I see it's an apk, so I wonder if it just emulates recovery.
wondering
spotmark said:
Anybody tried this, yet? I see it's an apk, so I wonder if it just emulates recovery.
Click to expand...
Click to collapse
I can't read the language....What does it say?
cairui505 said:
LOOK http://bbs.gfan.com/forum.php?mod=viewthread&tid=7653470&pid=251597018&page=4&extra=#pid251597018
recovery 。。
http://pan.baidu.com/s/1eQjBXiq it work on my vs985 。
ROM
http://pan.baidu.com/s/1nt7Knd3
the recovery has some bugs。。。 but can work 。。。 we got roms now！！
so sorry for my English。。。
Click to expand...
Click to collapse
Recovery does work I just got done making a backup and restoring it now. Excellent news if I do say so.
---------- Post added at 09:34 AM ---------- Previous post was at 09:27 AM ----------
spotmark said:
Anybody tried this, yet? I see it's an apk, so I wonder if it just emulates recovery.
Click to expand...
Click to collapse
desireaftergod said:
I can't read the language....What does it say?
Click to expand...
Click to collapse
I couldn't read it either so I used Google Chrome and had Chrome translate it for me. Basically the recovery is an apk and there is a chinese rom. I have tried the recovery but I have NOT tried rom yet and not sure if I want too as everything will most likely be in chinese.
The recovery Failed to restore the backup it made. It gave the following error
E:format_volume failed to unmount "/system"
Error while formatting /system!
Always_Jonezen said:
Recovery does work I just got done making a backup and restoring it now. Excellent news if I do say so.
---------- Post added at 09:34 AM ---------- Previous post was at 09:27 AM ----------
I couldn't read it either so I used Google Chrome and had Chrome translate it for me. Basically the recovery is an apk and there is a chinese rom. I have tried the recovery but I have NOT tried rom yet and not sure if I want too as everything will most likely be in chinese.
The recovery Failed to restore the backup it made. It gave the following error
E:format_volume failed to unmount "/system"
Error while formatting /system!
Click to expand...
Click to collapse
Thanks for being a "guinea pig"....and reporting back
desireaftergod said:
Thanks for being a "guinea pig"....and reporting back
Click to expand...
Click to collapse
Lol, NP, someone has got too
Not installing anything on my phone that is not at least blessed by the devs here.
It's a site where I can't read the language and the app does things that I have no clue about.
Risk it if you want, but if you end up with a dead device or spyware; don't say I didn't warn you.
it's Chinese rom . I have already flash the rom and worked well
I'm guessing this is probably the same thing as the Chinese recovery that was "discovered" a couple weeks after the phone was released, just being rediscovered. Even if it's something different, if it's an .APK it's more than likely a flash tool rather than a recovery, seeing how the bootloader hasn't been unlocked and all. Also pretty sure it was a Chinese user who posted the other "recovery" and said it worked well for all functions. I dunno about anyone else, but seeing how I'm on Verizon (in the USA) and speak English, I have no use for a "Chinese ROM." Hopefully this goes without saying, but as tech_head said if you try flashing this "ROM" don't expect to have a working G3 when you're done. :silly:
THEbigSWEEN said:
I'm guessing this is probably the same thing as the Chinese recovery that was "discovered" a couple weeks after the phone was released, just being rediscovered. Even if it's something different, if it's an .APK it's more than likely a flash tool rather than a recovery, seeing how the bootloader hasn't been unlocked and all. Also pretty sure it was a Chinese user who posted the other "recovery" and said it worked well for all functions. I dunno about anyone else, but seeing how I'm on Verizon (in the USA) and speak English, I have no use for a "Chinese ROM." Hopefully this goes without saying, but as tech_head said if you try flashing this "ROM" don't expect to have a working G3 when you're done. :silly:
Click to expand...
Click to collapse
may be U r right. I just post it here to see if someone can fix the problem.and the'' rom '' also have English language.. whatever I am not the guy who make this..
Hurray
This Rom works 100%! I'm on it right now after switching the language from Chinese back to English it is like a daily driver. We should get a dev to see this! Plus I translated the forum through Google chrome and it is a development forum for the vs985. EDIT: No Data and Random reboots only known issues.
hmmm. ill be looking into this later
I've been using this Chinese CWM bootstrap APK for the longest.... well really only a month because that's how long I've had my G3... I've used this in combination with the kitkat deodexer tool to create a deodexed stock rom which works perfectly.... This CWM is also useful in flashing general mods like the pure audio mod for instance also perfectly flashes (adds a nice volume boost as well).. HOWEVER, people are right to be sketchy about it. For one thing, I don't think this installs any spyware on your phone like some have suggested, but it's by no means a full proof recovery either... yes system backups work, but don't dare try to restore it by any means or you'll get an error after it wipes your system to begin restore, and then you'll have to flash back to stock. Also don't do anything stupid like try and flash TMobile roms to your Verizon G3, because even though it will allow you to flash it and say it completed successfully, you will be overwriting your kernel with an insecure kernel and you will not be able to boot your device up at all.... also if you do something this stupid, you will also block yourself from being able to flash back to stock because your phone will think it's a D851 and not a VS985... Finally, I'd also avoid flashing this Chinese rom... yeah it worked and booted for me, but I had no 4g... I'm sure that if you back up your apn settings beforehand, you'll be fine, but still I'd just avoid it. So long story short, use this recovery, but don't expect miracles from it. Devs should really look into decompiling this bootstrap apk and fixing the mount points, and then we'd have a full functioning tethered CWM.
zachariahpope said:
I've been using this Chinese CWM bootstrap APK for the longest.... well really only a month because that's how long I've had my G3... I've used this in combination with the kitkat deodexer tool to create a deodexed stock rom which works perfectly.... This CWM is also useful in flashing general mods like the pure audio mod for instance also perfectly flashes (adds a nice volume boost as well).. HOWEVER, people are right to be sketchy about it. For one thing, I don't think this installs any spyware on your phone like some have suggested, but it's by no means a full proof recovery either... yes system backups work, but don't dare try to restore it by any means or you'll get an error after it wipes your system to begin restore, and then you'll have to flash back to stock. Also don't do anything stupid like try and flash TMobile roms to your Verizon G3, because even though it will allow you to flash it and say it completed successfully, you will be overwriting your kernel with an insecure kernel and you will not be able to boot your device up at all.... also if you do something this stupid, you will also block yourself from being able to flash back to stock because your phone will think it's a D851 and not a VS985... Finally, I'd also avoid flashing this Chinese rom... yeah it worked and booted for me, but I had no 4g... I'm sure that if you back up your apn settings beforehand, you'll be fine, but still I'd just avoid it. So long story short, use this recovery, but don't expect miracles from it. Devs should really look into decompiling this bootstrap apk and fixing the mount points, and then we'd have a full functioning tethered CWM.
Click to expand...
Click to collapse
Do you think I could get a link to your rom?
Update guys a friend on xda is taking this apk apart and will as time permits see how it works,if it's beneficial to vs985,and most importantly make sure nothing is there that would cause harm to our devices..Stay tuned ,will update you guys if I have more info!
kdouvia said:
Do you think I could get a link to your rom?
Click to expand...
Click to collapse
Absolutely just flash this for a complete stock deodexed system and framework... Don't wipe data or do anything special in cwm, just install zip from storage. Here ya go https://mega.co.nz/#!7ZkTTArS!p9WLDNIatV5VU6gewbFKVSdFR88wzdPUDcgR6SRXjow
---------- Post added at 10:16 AM ---------- Previous post was at 10:14 AM ----------
If you have any left over odex files in system, I probably didn't bother deodexing them as they are bloatware apps that got deleted.
Decompiling the app....
dabug123 said:
Update guys a friend on xda is taking this apk apart and will as time permits see how it works,if it's beneficial to vs985,and most importantly make sure nothing is there that would cause harm to our devices..Stay tuned ,will update you guys if I have more info!
Click to expand...
Click to collapse
And who is this friend if you don't mind me asking?[emoji13]
krazy_smokezalot said:
And who is this friend if you don't mind me asking?[emoji13]
Click to expand...
Click to collapse
I prefer not to say until something pans out ..I will say he said mount points look OK but that he does not trust the site the apk is coming from and wouldnt use do to that reason
zachariahpope said:
Absolutely just flash this for a complete stock deodexed system and framework... Don't wipe data or do anything special in cwm, just install zip from storage. Here ya go https://mega.co.nz/#!7ZkTTArS!p9WLDNIatV5VU6gewbFKVSdFR88wzdPUDcgR6SRXjow
---------- Post added at 10:16 AM ---------- Previous post was at 10:14 AM ----------
If you have any left over odex files in system, I probably didn't bother deodexing them as they are bloatware apps that got deleted.
Click to expand...
Click to collapse
Install of your zip is working great except I'm missing the LG Keyboard.
Well I guess I've turned into that guy too...
I have a Verizon LG Optimus Exceed 2 (VS450PP) with some form of CWM recovery installed (I used a LG L70 ms323 version).
For some reason, recovery still boots into stock recovery, but when I chose the factory reset, I see a CWM logo for a fraction of a second..
I tried flashing Cyanogenmod 11, but stupid me, I didn't check if the boot.img was locked. (shoulda Bump'd it!).
Now I get a security error when booting, and recovery isn't working properly either.
I've searched high and low for the KDZ/TOT/DLL files for this phone and haven't found any yet, so I'm turning this over to you guys at XDA for help.
Please Help!
Thanks!
lmao if you think youre getting any help here
elisam98 said:
Well I guess I've turned into that guy too...
I have a Verizon LG Optimus Exceed 2 (VS450PP) with some form of CWM recovery installed (I used a LG L70 ms323 version).
For some reason, recovery still boots into stock recovery, but when I chose the factory reset, I see a CWM logo for a fraction of a second..
I tried flashing Cyanogenmod 11, but stupid me, I didn't check if the boot.img was locked. (shoulda Bump'd it!).
Now I get a security error when booting, and recovery isn't working properly either.
I've searched high and low for the KDZ/TOT/DLL files for this phone and haven't found any yet, so I'm turning this over to you guys at XDA for help.
Please Help!
Thanks!
Click to expand...
Click to collapse
Here you go: Link to VS450PP1_04.kdz
I'm having an awful time getting the w5c_twrp_bumped.img to actually do a backup on the Exceed 2. Worked like a dream on my Realm. I posted my dilemma a little further down the thread. Hopefully someone can come up with an answer...
Edit: Fixed the partition list in the recovery and it now works on the VS450PP in addition to the LS620. See post #33 in the thread linked above if interested.
So there's no working custom recovery for verizon exceed 2?
guest_2011 said:
So there's no working custom recovery for verizon exceed 2?
Click to expand...
Click to collapse
Yes there is : http://androidforums.com/index.php?posts/7080318
LG Exeed 2 TWRP 2.8.6
Sent from my LG-VS450PP using Tapatalk 2
fathergweedo said:
Yes there is : http://androidforums.com/index.php?posts/7080318
LG Exeed 2 TWRP 2.8.6
Sent from my LG-VS450PP using Tapatalk 2
Click to expand...
Click to collapse
installing. thanks.
But the bootloader is still locked so no custom roms for this phone ever, thanks to verizon?
guest_2011 said:
installing. thanks.
Click to expand...
Click to collapse
Thanks should go to the author over there, not me
But the bootloader is still locked so no custom roms for this phone ever, thanks to verizon?
Click to expand...
Click to collapse
Still possible by bumping a modified boot.img, but a debloated stock ROM is likely the most you will ever see. I had been working on one, but my time has been so very limited of late. Unfortunately, there's lot much love for sub $100 devices in the development community these days, and I don't possess the skill set for AOSP development myself (yet).
If you (or anyone) has the time to freeze some of the crap on an active one of these without breaking things, I'd love to hear about it. I could then create a debloated, deodexed, zip-aligned one to flash in TWRP.
fathergweedo said:
Thanks should go to the author over there, not me
Still possible by bumping a modified boot.img, but a debloated stock ROM is likely the most you will ever see. I had been working on one, but my time has been so very limited of late. Unfortunately, there's lot much love for sub $100 devices in the development community these days, and I don't possess the skill set for AOSP development myself (yet).
If you (or anyone) has the time to freeze some of the crap on an active one of these without breaking things, I'd love to hear about it. I could then create a debloated, deodexed, zip-aligned one to flash in TWRP.
Click to expand...
Click to collapse
This is one of those cheap phones that would benefit from love and support. Some things it does better than my GS3. I used Romtoolbox to delete non-system apps. Email, gmail, some google apps. Kept some verizon crap just in case. Not sure if safe to delete google talkback. Probably safe (http://www.androidcentral.com/what-google-talk-back). Possibly a few more apps/services can be deleted i can't think of right now. I have ~180MB free space with GPS and some other apps installed. 32GB SD FAT formatted for media, downloads, some gps maps. Never had luck with link2sd, don't want to swap internal<>external storage.
I was uninstalling apps with romtoolbox and accidentally deleted a home theme. Now the home screen blinks. Is there a way to flash stock? Rooted, TWRP installed. I used to do it with older LG phones but can't remember how i did emergency recovery.
guest_2011 said:
I was uninstalling apps with romtoolbox and accidentally deleted a home theme. Now the home screen blinks. Is there a way to flash stock? Rooted, TWRP installed. I used to do it with older LG phones but can't remember how i did emergency recovery.
Click to expand...
Click to collapse
Boot to your TWRP recovery and restore your latest working backup?
Pull Battery out
Put Battery back in
Hold Volume Down and Power until a white screen comes up
You should get 4 options
Use Volume Down to select Wipe Cache
Press Power Button
It should then go into TWRP
If you don't have a backup you can return to complete stock (wipes the phone) via the links in my posting over here.
fathergweedo said:
Boot to your TWRP recovery and restore your latest working backup?
Pull Battery out
Put Battery back in
Hold Volume Down and Power until a white screen comes up
You should get 4 options
Use Volume Down to select Wipe Cache
Press Power Button
It should then go into TWRP
If you don't have a backup you can return to complete stock (wipes the phone) via the links in my posting over here.
Click to expand...
Click to collapse
I've done accidental deletions with older phones but this time was different. I deleted my home screen theme while debloating. There's no LG emergency recovery tool, no KDZ on lg site. I dl elsewere and another custom lg tool from a forum. I could access settings and selected a new home screen theme. No need for recovery. I figured i can always dl a custom theme. Installed Nova launcher. Everything is good. I'll bookmark this page in case i screw up again. Thanks.
guest_2011 said:
I've done accidental deletions with older phones but this time was different. I deleted my home screen theme while debloating. There's no LG emergency recovery tool, no KDZ on lg site. I dl elsewere and another custom lg tool from a forum. I could access settings and selected a new home screen theme. No need for recovery. I figured i can always dl a custom theme. Installed Nova launcher. Everything is good. I'll bookmark this page in case i screw up again. Thanks.
Click to expand...
Click to collapse
The post has a link to the kdz. You might want to grab it in case they update it to something that you cannot root or install a custom recovery on. Wish I had one for the LG Transpyre before they updated it to 5.1.1. Just saying...
Sent from my XT907 using Tapatalk 2
fathergweedo said:
The post has a link to the kdz. You might want to grab it in case they update it to something that you cannot root or install a custom recovery on. Wish I had one for the LG Transpyre before they updated it to 5.1.1. Just saying...
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
I have 2 phones. Can i back up in TWRP and restore in the other phone? I've never done backups. Not a fan of backups in pc and phones.
Can QSLIDE be removed? I used to do it in L9 but i think i had to flash a zip file in recovery to get rid of it. Also quicknote needs to go.
guest_2011 said:
I have 2 phones. Can i back up in TWRP and restore in the other phone? I've never done backups. Not a fan of backups in pc and phones.
Can QSLIDE be removed? I used to do it in L9 but i think i had to flash a zip file in recovery to get rid of it. Also quicknote needs to go.
Click to expand...
Click to collapse
Wow. Never heard of QSLIDE, but if you don't backup, you can't play. Simple as that. Pay for TiB to (or whatever) freeze and test, or take your chances. I would NEVER delete stuff without any backup.
Sent from my XT907 using Tapatalk 2
I set up aquamail to see if this phone has notification light in home button. It does!!! very nice, unlike moto crap screen.
Amazing colors, so simple, so useful. Now whenever i need to know if i have messages i look at these phones instead of cheaporola screen.
I guess there's no hope for CM
fathergweedo said:
Here you go: Link to VS450PP1_04.kdz
I'm having an awful time getting the w5c_twrp_bumped.img to actually do a backup on the Exceed 2. Worked like a dream on my Realm. I posted my dilemma a little further down the thread. Hopefully someone can come up with an answer...
Edit: Fixed the partition list in the recovery and it now works on the VS450PP in addition to the LS620. See post #33 in the thread linked above if interested.
Click to expand...
Click to collapse
Can you repost KDZ pls? Link is dead.
guest_2011 said:
Can you repost KDZ pls? Link is dead.
Click to expand...
Click to collapse
Just verified link is good. Some have reported issues with Chrome and other browsers. Pulls fine with Firefox on my laptop and Lightning on my phone.
fathergweedo said:
Just verified link is good. Some have reported issues with Chrome and other browsers. Pulls fine with Firefox on my laptop and Lightning on my phone.
Click to expand...
Click to collapse
I use firefox, tried chrome, mobile firefox and stock cm13 browser, edge. Nothing works for me.
was able to get it here http://androidforums.com/threads/lg-exceed-2-resources.979449/
guest_2011 said:
I use firefox, tried chrome, mobile firefox and stock cm13 browser, edge. Nothing works for me.
was able to get it here http://androidforums.com/threads/lg-exceed-2-resources.979449/
Click to expand...
Click to collapse
I had *just* put this up for you on AFH and was about to link you to it. Thanks to myfishbear over there, I can remove it. No need to waste file space if available elsewhere. Nice that he put everything all in one place. :good:
fathergweedo said:
I had *just* put this up for you on AFH and was about to link you to it. Thanks to myfishbear over there, I can remove it. No need to waste file space if available elsewhere. Nice that he put everything all in one place. :good:
Click to expand...
Click to collapse
I was able to reflash, with errors in win10 for unknown reason, but kzd pushed through anyway and now i have a working phone again. Thanks.
Here's the link to his page just in case others have trouble
http://androidforums.com/threads/lg-exceed-2-resources.979449/
I bring to you completely stock builds of Lollipop (N915PVPU2BOC8). Built from the official Samsung tar. The rom is rooted and has init.d/busybox support. Knox and Sprint Itson has been removed completely. The roms are available as odexed and deodexed . Also included in every rom is the OC8 modem and HLOS patch to ensure you have the latest modem with this rom. (the HLOS patch is the factory Samsung modem patch and I simply added it in just like the official tar. I have no other details, it is official from Samsung and apparently has an important purpose.).
Other than having root, the removal of Knox & Itson, these roms are completely stock in every other way. These roms are stock and will stay that way. Please don't ask for mods, changes, etc in this thread. These roms are intended for those people who want the stock roms in their original form with the addition of root and removal of Knox & itson as well as other members who need a good solid base for their rom projects. I WILL NOT add the hotspot mod to this stock rom. there is a seperate thread for this. Some people actually pay for the hotspot and the mod does not need to interfere in any way for those people.
I give permission for other dev's/chefs to use this rom as your base and I highly recommend that you do so because it is bug-free and built from the official Samsung .tar. However I do expect credit if you use this rom or portion of it for any other project. If you like my work please press that Thanks button and consider making a kind donation for my efforts. Enjoy!
Important Note: Before flashing ANY Lollipop ROM. including this one, you MUST first have done one of the following: Taken the Lollipop ota update OR odin flashed the stock N915PVPU2BOC8_N915PSPT2BOC8_SPR rom tar. If you are still on any KK based rom (including any KK AOSP/CM based roms) then you MUST first update to Lollipop by one of the two methods I mentioned BEFORE flashing either of these roms..
Flashing instructions: ***Before beginning the flash/setup process MAKE SURE your battery has at least 50% charge and/or connected to the charger!!!***
1. Backup anything you don't want to lose off your internal storage to another location.
2. Download the rom using your pc. (downloading with your phone has a much higher risk of file corruption. Not recommended with large files).
3. VERIFY the md5!!! Once the download has finished, compare the AFH md5 using a md5 tool on your pc. (Google is your friend).
4. Put the downloaded rom onto your internal storage or external micro sd card.
5. With phone powered off, reboot into recovery by pressing and holding volume up, power and the home button until you see the samsusung logo then release all buttons.
6. Once in recovery choose the wipe button and do a factory reset three times. Optional but recommended is to do a "Data" wipe. This will wipe all of your internal storage so MAKE SURE you backed up first like i said in step #1 above! Then go to "advanced wipe" and select all of the partitions EXCEPT micro-sd card and internal storage. Internal storage is optional but recommended on first time flashing Lollipop.
7. Choose the "Install" option and select the rom "N915PVPU2BOC8_Odexed/Deodexed_Stock_ROM" from either your internal or external micro-sd card. It will flash the rom and give a confirmation once completed.
8. Press "Reboot" then "reboot system".
9. Initial rom setup will take several minutes and remain on the yellow Sprint Spark screen for at least 13 minutes (definately much longer than what you are used to). Let the phone setup/optimize for at least 15 minutes and the screen WILL eventually turn off once it finishes.
10. When you see the screen turn off, you can proceed with the setup wizard. Once finished with setup wizard wait a few moments and the phone will automatically install the sprint apps. You must either "accept" or "disagree" with each and every google prompt for these apps or else the installs pause untill you do so.. Also you will be prompted for the "connections optimizer". Quickly set it to what you want and close it. That's it! You're done!
flashing anything on your device is done at your own risk. There is no way myself or any other developer can guarantee that flashing this ROM or any other file will not brick your device or otherwise cause some other type of damage. This is just a standard warning. I am not responsible for anything that you do to your device.
DOWNLOADSN915PVPU2BOC8_Odexed_Stock_ROMN915PVPU2BOC8_Deodexed_Stock_ROM
Reserved...
Thanks oh and 1st lol always wanted to do that
Thank you
tx_dbs_tx said:
Reserved...
Click to expand...
Click to collapse
Thank you !
where is your tip jar?
cvaria said:
Thank you !
where is your tip jar?
Click to expand...
Click to collapse
Click on the yellow donate button below my avatar. If your using a mobile browser you may have to set it to desktop mode instead of mobile in order to see user avatars, etc. Thanks.
Awesomeness. Thanks so much.
Thanks for all your efforts. Wish i could give more but wife doesn't quite get it. ........38K6498359688140M
Sent from Uranus, the only planet with a ring on the inside.
They never do..
primo523 said:
They never do..
Click to expand...
Click to collapse
+1000
Sent from my SM-N915P using Tapatalk
---------- Post added at 09:43 PM ---------- Previous post was at 09:40 PM ----------
Quick question about the hybrid rom. It may be similar with stock but every once in a while I bump the phone and the screen turns on. Is there a way to turn off that feature or is that even an option?
Thanks and sorry to post in this stock thread but I just don't know if it's a glitch or a feature that is turned on.
Edit: I'm an idiot. It was a notification app I downloaded and completely forgot I had done so. Removed no more screen coming on.
Charles
Sent from my SM-N915P using Tapatalk
Do i have to have rood and custom recovery. Or just be 100% lollipop? And by this having
No KNOX/Itson will it still trip the counter?
elfeo0 said:
Do i have to have rood and custom recovery. Or just be 100% lollipop? And by this having
No KNOX/Itson will it still trip the counter?
Click to expand...
Click to collapse
Yes you have to have root and TWRP custom recovery is the recommended recovery (just use note 4's twrp it'll be a little jumpy but it works) and i don't believe it trips the counter I wanna say I'm 95% sure it doesn't
elfeo0 said:
Do i have to have rood and custom recovery. Or just be 100% lollipop? And by this having
No KNOX/Itson will it still trip the counter?
Click to expand...
Click to collapse
The answer is yes to all of your questions. I think you should do more research before tampering with your phone so that you first know exactly what you're doing and secondly learn how to do what's required to flash a custom/stock rom. You WILL trip the KNOX coynter on your phone if your root and flash non official roms. There's more information about this, just search.
ceabbott2 said:
+1000
Sent from my SM-N915P using Tapatalk
---------- Post added at 09:43 PM ---------- Previous post was at 09:40 PM ----------
Quick question about the hybrid rom. It may be similar with stock but every once in a while I bump the phone and the screen turns on. Is there a way to turn off that feature or is that even an option?
Thanks and sorry to post in this stock thread but I just don't know if it's a glitch or a feature that is turned on.
Charles
Sent from my SM-N915P using Tapatalk
Click to expand...
Click to collapse
This may or may not be a feature on the Note Edge. I haven't heard of it before. The only feature that I know of that is similar on the regular Note 4 is the vibration upon picking up the phone to notify you of notifications. But this doesn't turn on the screen. I suspect your issue is somehow part of the stock rom because I haven't changed anythin in the rom that would cause anything like this. I'm not familiar with the Note Edge.
I will build a new X-Series rom with V4A if there is enough interest and continued support from users.
I would like to see hot-spot unlocked in the next version. I really appreciate this..
primo523 said:
I would like to see hot-spot unlocked in the next version. I really appreciate this..
Click to expand...
Click to collapse
I think TX has a hotspot mod that you can flash that unlocks that. I know it weighs I his hybrid Rom that I'm running.
Sent from my SM-N915P using Tapatalk
ceabbott2 said:
I think TX has a hotspot mod that you can flash that unlocks that. I know it weighs I his hybrid Rom that I'm running.
Sent from my SM-N915P using Tapatalk
Click to expand...
Click to collapse
So you're running the stock deodexed ROM with hotspot?
primo523 said:
I would like to see hot-spot unlocked in the next version. I really appreciate this..
Click to expand...
Click to collapse
Not to be rude,but there is a thread directly below this one dedicated to the hotspot mod. Just a little reading might keep more of these developers, who are doing this for free for us from just calling it quits. Again just my thoughts.
Sent from my SM-N915P
Just wanted to post because I try albeit a little but I Really appreciate all of the developers. For some reason this took longer than expected because of outdated credit cards in my PayPal account. Thank you tx_dbs_tx!
PayPal transaction # 0DF57944BR625872R
Charles
Sent from my SM-N915P using Tapatalk
ebe01 said:
Not to be rude,but there is a thread directly below this one dedicated to the hotspot mod. Just a little reading might keep more of these developers, who are doing this for free for us from just calling it quits. Again just my thoughts.
Sent from my SM-N915P
Click to expand...
Click to collapse
I can read just fine and no one cares about ur thoughts. I was just asking to incorporate the hotspot mod with the next rom so we don't have to flash multiple times and manual delete files for people new to flashing. Donation made
PayPal transaction GDF67742JR525382A
primo523 said:
I would like to see hot-spot unlocked in the next version. I really appreciate this..
Click to expand...
Click to collapse
And again, same point,its states in the op please do not ask for mods and add ons in this thread. And people wonder why some many devolpers are leaving xda.
Sent from my SM-N915P
after a long wait for the firmware to be released of the S4 running OH7 , it still has not been released. However i decided to make it myself and now we finally have it. I have tested it on my S4 that came with OH7 build originally. So here you go guys, Firmware containing OH7 running lollipop 5.0.1 with stock kernel 3.4 of mon Sep. 7 2015.
little guide to help you install the firmware if you need it.
you will find the firmware link below that i have uploaded and as for odin you can just google it. now im sure you can use other versions of odin but always safest to be up-to-date.
you will need: OH7 firmware file (Download link at the bottom), odin 3.10.7, WinRar and USB data cable
steps:
1. put phone into download mode by holding the home+vol up+power keys at the same time.
2. plug your phone into your PC (be sure drivers for the phone are installed correctly)
3. open up your handy tool of Odin
4. open up the firmware file you have downloaded in Winrar and extract it, you will then be given an MD5 File containing the firmware
5. click on "AP" in odin and browse for the file (odin might not respond after that but be patient, it will)
6. after the program responds, double check that F. Reset time and Auto Reboot are the ONLY ones ticked/checked
7.Go ahead and hit start and sit back for a few minutes and let odin do its thing
8. after all goes well and in the top box says "PASS!" then your phone will reboot and be good as new.
Just a heads up that this firmware is meant and made for the prepaid variant of the Verizon S4. I wouldnt recommend trying it on the postpaid S4 for the postpaid firmware has negative effects on the prepaid variant so id assume it have the same outcome on postpaid variant. Also im not responsible like anyone else out there if you brick your phone by not following the steps correctly or flashing it incorrectly in some way. Just a disclaimer that everyone puts out on here. hope this helps everyone. enjoy!
If the link becomes a broken link, let me know and i will update. i just need to move the file from time to time due to high data traffic
Link Update
https://mega.nz/#!Uk412ZwR!IT_c5Lq6hxbs_CbDVJZKIEv9pAMony8vdUgvvVq0zuE
now that i have released the stock firmware of OH7, i am trying to Deodex this also but keep getting failed start ups. i used LBD 2.5 to try an deodex and followed the guide but i hear start up sound not even a second and it stops and it dont show the verizon logo. i used flashfire to flash the deodexed files. so that being said, could some actual dev, deodex this firmware for i cannot? id really appreciate it and id share the deodexed firmware on the thread as well with of course giving proper credit to whomever can deodex it. thanks!
bjf189 said:
now that i have released the stock firmware of OH7, i am trying to Deodex this also but keep getting failed start ups. i used LBD 2.5 to try an deodex and followed the guide but i hear start up sound not even a second and it stops and it dont show the verizon logo. i used flashfire to flash the deodexed files. so that being said, could some actual dev, deodex this firmware for i cannot? id really appreciate it and id share the deodexed firmware on the thread as well with of course giving proper credit to whomever can deodex it. thanks!
Click to expand...
Click to collapse
This needs to be maken into a rom first as well before deodexed but i can do both actually if you don't know how to build a rom.
Sent from my SM-G935V using Tapatalk
Well if you could do both, I'd really appreciate it. I can't even begin to understand how to extract an md5. So confusing. Plus gotta get it to work with flash fire. I tried other roms with flashfire and kept getting system not responding. So I always had to Odin back to stock and on the custom rom I never get even a boot animation. So I'm not sure what's up with it
stang5litre said:
This needs to be maken into a rom first as well before deodexed but i can do both actually if you don't know how to build a rom.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
What you think?
bjf189 said:
Well if you could do both, I'd really appreciate it. I can't even begin to understand how to extract an md5. So confusing. Plus gotta get it to work with flash fire. I tried other roms with flashfire and kept getting system not responding. So I always had to Odin back to stock and on the custom rom I never get even a boot animation. So I'm not sure what's up with it
Click to expand...
Click to collapse
Flash fire is horrible. Use v24 seems to be the best atm. I can do both. In the middle of mod'ing the s5 rom I made. But after I build it I would have you test it 1st before deodexing as you want to make sure it boots 1st before moving on.
Sent from my SM-G935V using Tapatalk
stang5litre said:
Flash fire is horrible. Use v24 seems to be the best atm. I can do both. In the middle of mod'ing the s5 rom I made. But after I build it I would have you test it 1st before deodexing as you want to make sure it boots 1st before moving on.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I think I tried your rom before. Your username was on a rom that I tried. It was non mdk which was said to use. I used flashfire beings I can't have safestrap on lollipop. It's all I could use to flash things thanks to a locked bootloader. But I'll try your suggestion and I can surely test what you put out for the s4. Just need an idea of what to use to flash things. And you talking version 24 of flashfire? Cause I already use that an got those outcomes. Also if it makes it any easier on you, could you just rebuild your ultranote5 rom for the prepaid variant? Whichever is easier for you. I loved the feature list that you had for it though I couldn't get it to get past the boot screen cause it would like freeze at the animation but at the same time there wasn't even an animation. Just a quick Samsung sound that doesn't even finish. Wish I knew more about rom development but it can get get complex I think.
bjf189 said:
now that i have released the stock firmware of OH7, i am trying to Deodex this also but keep getting failed start ups. i used LBD 2.5 to try an deodex and followed the guide but i hear start up sound not even a second and it stops and it dont show the verizon logo. i used flashfire to flash the deodexed files. so that being said, could some actual dev, deodex this firmware for i cannot? id really appreciate it and id share the deodexed firmware on the thread as well with of course giving proper credit to whomever can deodex it. thanks!
Click to expand...
Click to collapse
Not sure if it's still an issue or not, but I had similar problems before. Flashfire didn't seem to be finishing backups or flashes. I think I was using v18 or 19. Setting the screen timeout to 10 minutes fixed it, no problems after that and I just set it back when I'm done.
F1a5hP01ntX said:
Not sure if it's still an issue or not, but I had similar problems before. Flashfire didn't seem to be finishing backups or flashes. I think I was using v18 or 19. Setting the screen timeout to 10 minutes fixed it, no problems after that and I just set it back when I'm done.
Click to expand...
Click to collapse
My screen never shut off when I used flashfire. So I'm not sure. Could be something in flashfire being it was made for the s4. Not the prepaid variant. So maybe some code in it is different in the postpaid. Who knows
bjf189 said:
My screen never shut off when I used flashfire. So I'm not sure. Could be something in flashfire being it was made for the s4. Not the prepaid variant. So maybe some code in it is different in the postpaid. Who knows
Click to expand...
Click to collapse
Ah, not sure about that. I'm pretty sure my screen would shut off and then reboot shortly afterward as if it finished properly. I also just remembered that flashfire used to rearrange the order that the operations were added and would move the wipe toward the bottom of the list, usually after the flash. I would double check that the order is correct before starting if you haven't already. Those two were the only problems I had. Hope those tips help in some way.
F1a5hP01ntX said:
Ah, not sure about that. I'm pretty sure my screen would shut off and then reboot shortly afterward as if it finished properly. I also just remembered that flashfire used to rearrange the order that the operations were added and would move the wipe toward the bottom of the list, usually after the flash. I would double check that the order is correct before starting if you haven't already. Those two were the only problems I had. Hope those tips help in some way.
Click to expand...
Click to collapse
Well far as I know I'm using the up to date version which is .24. I haven't had the screen off issue or the rearranging problem. Flashfire showed what it was doing and what order it did it in. Everytime I used it, if the screen went black, it would say rebooting...after all was finished. So maybe the version you had was just buggy which the dev did say its a work in progress. Stuff like that, I'd be surprised if they got it to work perfectly with no bugs
stang5litre said:
Flash fire is horrible. Use v24 seems to be the best atm. I can do both. In the middle of mod'ing the s5 rom I made. But after I build it I would have you test it 1st before deodexing as you want to make sure it boots 1st before moving on.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I am more then willing to test any roms out as well. My new Galaxy S4 prepaid is only for tethering on my unlimited data, so I need a rom that I can install Xposed Framework on. Any rom that comes out and needs testing for OH7 based phones, I am onboard with.
TheXev said:
I am more then willing to test any roms out as well. My new Galaxy S4 prepaid is only for tethering on my unlimited data, so I need a rom that I can install Xposed Framework on. Any rom that comes out and needs testing for OH7 based phones, I am onboard with.
Click to expand...
Click to collapse
Well I am looking to install xposed as well but we gotta wait for the dev to have free time to rebuild a rom to the oh7. Well at least he has two people willing to test now for him. How did you get unlimited data with Verizon? They so stingy with data
Sorry been busy. Will build it tonight. Already deodexed. Just got to build it. If all you doing is using it for a hot spot why waste time building a rom for it. Dl a app and use your hot spot. I use foxfi on my s7 edge. Works np.
Let me know. Thought this was for people to actually use.
Sent from my SM-G935V using Tapatalk
---------- Post added at 09:15 AM ---------- Previous post was at 09:14 AM ----------
bjf189 said:
Well far as I know I'm using the up to date version which is .24. I haven't had the screen off issue or the rearranging problem. Flashfire showed what it was doing and what order it did it in. Everytime I used it, if the screen went black, it would say rebooting...after all was finished. So maybe the version you had was just buggy which the dev did say its a work in progress. Stuff like that, I'd be surprised if they got it to work perfectly with no bugs
Click to expand...
Click to collapse
Black screen means the order was incorrect and wipe was moved to the end.
Sent from my SM-G935V using Tapatalk
stang5litre said:
Sorry been busy. Will build it tonight. Already deodexed. Just got to build it. If all you doing is using it for a hot spot why waste time building a rom for it. Dl a app and use your hot spot. I use foxfi on my s7 edge. Works np.
Let me know. Thought this was for people to actually use.
Sent from my SM-G935V using Tapatalk
---------- Post added at 09:15 AM ---------- Previous post was at 09:14 AM ----------
Black screen means the order was incorrect and wipe was moved to the end.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I'm not looking to use it for the hotspot. I already can use it without any problems. I'm just wanting a custom rom/modded stock rom, I hate full stock and I love being deodexed. I'm sure more people will use your rom once they discover it.
If you believe that flashfire moved the order around, what can I do to stop that? The log in it says what it's doing and it says it's going in correct order so im not sure. Ive been using v24 which is latest I think
bjf189 said:
I'm not looking to use it for the hotspot. I already can use it without any problems. I'm just wanting a custom rom/modded stock rom, I hate full stock and I love being deodexed. I'm sure more people will use your rom once they discover it.
If you believe that flashfire moved the order around, what can I do to stop that? The log in it says what it's doing and it says it's going in correct order so im not sure. Ive been using v24 which is latest I think
Click to expand...
Click to collapse
Flash Fire moves it on its own right before you flash. You have to press and hold wipe and drag it to the top. It does this a lot. Pain in the arse. Ok I'll build it then just wasn't sure
Sent from my SM-G935V using Tapatalk
stang5litre said:
Flash Fire moves it on its own right before you flash. You have to press and hold wipe and drag it to the top. It does this a lot. Pain in the arse. Ok I'll build it then just wasn't sure
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I did that cause it put it at the bottom at default. I moved it to the top but still got same outcome. Maybe it's something to do with the kernel an bootloader bring different? That's my guess
bjf189 said:
I did that cause it put it at the bottom at default. I moved it to the top but still got same outcome. Maybe it's something to do with the kernel an bootloader bring different? That's my guess
Click to expand...
Click to collapse
What were you flashing?
Sent from my SM-G935V using Tapatalk
stang5litre said:
What were you flashing?
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
Well I tried out your ultra note5 and non mdk one. I believe the ultra note wouldn't show the boot animation and cut off booting sound after a second then did nothing. The other one which was the non mdk one, didn't show boot animation but made the Samsung sound correctly but after booting into the system like ten minutes later of waiting, I get a pop up of system is not responding. If I ignore it an let it load another ten minutes or so, the setup wizard opens but if I hit wait or close on the system not responding box, it all closes and goes to black screen again and just repeats
bjf189 said:
Well I tried out your ultra note5 and non mdk one. I believe the ultra note wouldn't show the boot animation and cut off booting sound after a second then did nothing. The other one which was the non mdk one, didn't show boot animation but made the Samsung sound correctly but after booting into the system like ten minutes later of waiting, I get a pop up of system is not responding. If I ignore it an let it load another ten minutes or so, the setup wizard opens but if I hit wait or close on the system not responding box, it all closes and goes to black screen again and just repeats
Click to expand...
Click to collapse
Uploading stock rom for you to try....androidfilehost keeps losing connection.. You already built the rom from what i read a page back. So do you want me to just Upload the deodexd stuff for you to insert?
Sent from my SM-G935V using Tapatalk