I have a Lenovo Miix 310 2 in 1 netbook running Windows 10 Home, I have been trying to install Remix OS as a stand alone Os (not dual boot) but it never works (dual boot didn't work either). I have Remix Os up and running on my PC as a dual boot.
Main reason is Windows takes up a boat load of the 32GB space in the netbook and runs slow.
Lenovo Miix 310
S/N YE008QKT
Intel Atom x 5
2GB Ram
Windows 10 Home
Any help would be great.
Hello.
Did you install something different to windows finally?
Than you
Related
Im installing remix os on my pc using easybcd everything is fine and i did the correct step by step.. and after reboot i choose resident mode, screen flashed like 2second and my montor lose the signal (black screen) like on the screenshoot.. pls helpp
Spec : intel i5 4460 / gtx 970 / 8gb ram / os installed on ssd 120gb
This is related to nVidia I believe because you have spec of GTX970 ....it's documented somewhere, try searching
Hi all !!!
Been trying to install remix os on a new build,,,,not sure why but I just cannot complete the install...So here's what I've done , I'll give you specs of system first.
GA-B150-D3H mobo (using onboard graphics)
I5 7500 CPU
Samsung 850 ego 250GB (win 10 installed)
Seagate 750GB HHD
So what I done
Created a 64GB NTFS partition named it remix os
Downloaded remix os from jide, extracted then installed,
Choose hard drive and selected the remix os partition,,
Installed fines and when I reboot 2 options windows 10 and remix os...
Here's were the problems start, I select remix os it begins to load fine and gives me the language screen, when I select language it moves slightly freezes then reboots?????
I've tried reinstalling a view times,, disabled windows 10 security features in BIOS..Win sees BIOS as legacy..Not UEFI,,,
Sorry for the long winded walkthrough,, just didn't want to miss anything....
,,,,,,,,,,,,,,,So what am I missing,,,,,,,,,,,,,,
Recently, I just installed Remix OS on my USB and it worked fine. Because of my USB port are bit unstable, I just trying to install Remix OS on my HDD (hd0,7). But, when trying to boot from Windows Boot Loader. It shows "minimal BASH-like command - - -" , i found a solution for this and bring me to the Remix Mode Options (Resident/Guest). I tried to boot Remix from any options but it only shows and stop at blinking kernel messages and error message
"intel_powerclamp: Intel powerclamp does not run on family 28 model 43
intel_rapl : driver does not support cpu family 28 model 43"
When booting from USB, it doesn't matter and it can continue booting to Remix, but it won't continue boot when ran from HDD from my HP 14 Notebook PC.
I have alternative by using my Ubuntu's Grub legacy and succesfully boot. but, it won't save any settings.
Please help me to resolve my problem.
Here's my Laptop Specifications:
CPU: AMD-A8 6410 2.0GHz
GPU: Onboard
RAM: 2GB, 1.71GB usable
Boot Mode: Legacy, Secure boot: OFF
Installed OSes: Windows 7, Windows 10, Ubuntu, Remix OS(unbootable).
N. B: sorry, bad english. I'm javanese
Sent from my Coolpad A116 using Tapatalk
It seems you're booting into guest mode since nothing is being saved. How do you boot into Remix OS? I have an HP laptop too and press F9 as the laptop boots which then allows me to boot using the EFI file. That's the only way I can boot into it as the dual-boot screen doesn't appear automatically. You have quite a bit of software installed for a machine with only 2GB of RAM in total but I don't think that's your problem. Have you installed it onto a separate partition or installed it into the Windows drive in a folder? I made a new partition of 32GB, gave it a random letter for the drive, and it boots fine to that as long as I press F9 immediately on boot (repeatedly) until the boot loader menu comes up and I choose the EFI file to boot from, and eventually after that using grub.
All HP machines have the same F9 function key which will pull up the boot menu. Try that and see if you have the option to boot from EFI or EFIx64 depending on your system. I don't know why it's not saving anything from your sessions unless it is a lack of RAM/virtual memory space. I wasn't even aware there was a guest mode if you installed to hdd (so maybe there isn't). You could try to produce a logcat of what is happening as you boot and especially as you shut down to find out why it's not holding anything from your sessions in memory. I have 8GB of RAM in my laptop but as far as I know Remix OS only gets to use a fraction of that (about 2GB) so if you're only using a 2GB RAM in total laptop with several OS already installed on it you were bound to hit problems sooner or later as you add more, but whether that's related to your current problem I wouldn't know.
Well, I guess it was my fault because of using Linux-created Partition more than using Windows one. Maybe I'll try using windows-created partition, Thanks for your reply.
EDIT: It doesn't work, I tried to install it on 9 Laptops with 7 Models for 5 Manufactures (My friends are Remix Anthusiast you know) and only 2 Models have same problem with me. My Conclusion is that my Laptop model aren't supported yet to boot RemixOS from HDD.
Sent from my Coolpad A116 using Tapatalk
Just installed Remix OS for PC and it's great, but..
Skype and facebook messenger works fine until i make a call. After i or the other person answer app crashes and remix os works stange until i reboot it.
I tried voice call and video call, same problem.
If this is relevant, when remix os boots it messeges 'Driver does not support familly 6 model 37'.
Laptop specs:
Acer Aspire 5742g
Windows 10 64bits
CPU intel i5 580m
GPU NVidia GeForce 610M
RAM 4GB
SSD 256GB
Remix OS runs on dual boot.
The development of this operating system is already deprecated as no response is being given by the remix authorities so I expect you to find a solution yourself otherwise the support for this problem is very limited as I myself is suffering from other problems regarding this operating system
Hi. I'm new in this remix os stuff. I failed to install remix 64 bit on my asus netbook (with flip back touchscreen). It has intel n4200 and 4gb of ram.
It says "intel powerclamp does not run on family 6 model 92"
Writing speed test... Cannot detect the writing speed test. System may fail to boot up"
How to solve this problem?