Stuck in Multicolored Screen - Honor 5X Questions & Answers

Good day everyone. I am hoping I can get some help here on a problem that has been bothering me for weeks. I have the KIW-L21 phone, and I recently did an OTA update on the phone, but it got stuck on Honor when booting and never went past it. No matter what I did, it won't move and factory reset failed. So, I went to Honor support website and downloaded the "Update.app" files for UK, France, and Europe General for it. So, far when I flash the UK and General Europe, it goes well, but then I get this screen (image attached) and it keep looping on optimizing Device from 0 to 100 and again. http://i66.tinypic.com/o586d1.jpg
http://i64.tinypic.com/34z0jdi.jpg
http://i66.tinypic.com/igewk2.jpg
The French Update.app won't even work. But I am stuck here. These are all official ROMs from Huawei's website. I wonder what am doing wrong.
Please any sort of help is appreciated.
Thanks.

Is your phone still under warranty?

I am afraid Not
chrisleLP said:
Is your phone still under warranty?
Click to expand...
Click to collapse
I am afraid Not. Are you saying there is no hope for it?
I have read where someone had the same issue, but it still booted up fine, but just always showed the screen first. I was hoping this would be the case.

Damionix said:
I am afraid Not. Are you saying there is no hope for it?
I have read where someone had the same issue, but it still booted up fine, but just always showed the screen first. I was hoping this would be the case.
Click to expand...
Click to collapse
Cheer up. I'm not saying that. Can you boot to erecovery?

Yes
chrisleLP said:
Cheer up. I'm not saying that. Can you boot to erecovery?
Click to expand...
Click to collapse
I can boot into Factory Recovery. The Phone has never been rooted or messed with. Everything is still stock.

Damionix said:
I can boot into Factory Recovery. The Phone has never been rooted or messed with. Everything is still stock.
Click to expand...
Click to collapse
Did you download correct firmware according to your build number...?

I believe I did
hassanjavaid8181 said:
Did you download correct firmware according to your build number...?
Click to expand...
Click to collapse
I believe I did, but just to be on the safe side, I will tell you what I did. I looked on the back of the Phone, as I am unable to back into the Phone, and saw KIW-L21, and just before that it said QISKIW-L21.

Damionix said:
I can boot into Factory Recovery. The Phone has never been rooted or messed with. Everything is still stock.
Click to expand...
Click to collapse
Erecovery is the secondary recovery. There is an option there that will download and flash the latest available firmware. If after reflashing again, the problem still exist. I'm afraid yhis might be a hardware problem.

Damionix said:
I believe I did, but just to be on the safe side, I will tell you what I did. I looked on the back of the Phone, as I am unable to back into the Phone, and saw KIW-L21, and just before that it said QISKIW-L21.
Click to expand...
Click to collapse
No build number will be visible in settings/about..or on the box of the phone
Kiw-l21 has 2 version
Kiw-l21c185 middle east variant
Kiw-l21c432
Which one is yours?
What number firmware you were on before your issue??

This One
hassanjavaid8181 said:
No build number will be visible in settings/about..or on the box of the phone
Kiw-l21 has 2 version
Kiw-l21c185 middle east variant
Kiw-l21c432
Which one is yours?
What number firmware you were on before your issue??
Click to expand...
Click to collapse
DC - Unlocker 2 Client 1.00.1381
Detecting phone :
selection :
manufacturer - Huawei phones
model - Huawei phone in fastboot mode
Found Phone : MSM8916 for arm64
Model : Huawei phone in fastboot mode
Firmware : KIW-L21C432B140
NULL
FB LockState: LOCKED
widevine LockState: LOCKED
Bootloader Lock State: LOCKED
Root State: UNROOT
Bootloader WidevineKey: WidevineKey_NOTSET
System State: OK
Bootloader Version: 001.001.000
Battery state: battery is present
That is what I get from DC-Unlock Software

Damionix said:
DC - Unlocker 2 Client 1.00.1381
Detecting phone :
selection :
manufacturer - Huawei phones
model - Huawei phone in fastboot mode
Found Phone : MSM8916 for arm64
Model : Huawei phone in fastboot mode
Firmware : KIW-L21C432B140
NULL
FB LockState: LOCKED
widevine LockState: LOCKED
Bootloader Lock State: LOCKED
Root State: UNROOT
Bootloader WidevineKey: WidevineKey_NOTSET
System State: OK
Bootloader Version: 001.001.000
Battery state: battery is present
That is what I get from DC-Unlock Software
Click to expand...
Click to collapse
May be this firmware can help you..
http://huawei-firmware.com/rom/huawei-honor-5x/kiwl21/1298

hassanjavaid8181 said:
May be this firmware can help you..
http://huawei-firmware.com/rom/huawei-honor-5x/kiwl21/1298
Click to expand...
Click to collapse
Thank You very much. I will give it a try and let you know how it goes. I appreciate all the help.

Same Thing
hassanjavaid8181 said:
May be this firmware can help you..
http://huawei-firmware.com/rom/huawei-honor-5x/kiwl21/1298
Click to expand...
Click to collapse
Good Morning. I tried that and it didn't work either
Same thing. It flashes fine, then colored screen, and it gets stuck on Honor Splash Screen.

ERecovery
chrisleLP said:
Erecovery is the secondary recovery. There is an option there that will download and flash the latest available firmware. If after reflashing again, the problem still exist. I'm afraid yhis might be a hardware problem.
Click to expand...
Click to collapse
Could you please walk me through this erecovery process?

Damionix said:
Could you please walk me through this erecovery process?
Click to expand...
Click to collapse
Plug in your phone and boot to fastboot. In the console, type:
Code:
adb reboot recovery2
After that, select the first option.

Issue Resolved
I was able to use DC-Phoenix to flash a Factory Firmware, did an Upgrade Flash, and repair IMEI. I am now good to go. Thanks guys for all your input. I really appreciate it.

Damionix said:
I was able to use DC-Phoenix to flash a Factory Firmware, did an Upgrade Flash, and repair IMEI. I am now good to go. Thanks guys for all your input. I really appreciate it.
Click to expand...
Click to collapse
Glad you fixed your device..

Damionix said:
I was able to use DC-Phoenix to flash a Factory Firmware, did an Upgrade Flash, and repair IMEI. I am now good to go. Thanks guys for all your input. I really appreciate it.
Click to expand...
Click to collapse
Wow. Happy for you.

i have same problem here,flash firmwares in fastboot and in upgrade mode but no lucky,can you help me

have also problem in honor 5x kiw-l22 after flash i got multi colour but i can flash it through sd and fastboot mod on fastboot flash falid after that i connect on chimra tool i am getting model kiw-al10

Related

Urgent help needed: Sm-g360az bricked

Hello....i rooted my sm-g360az samsung phone and when i restarted the phone, it didn't boot up to the home screen. It shows the samsung logo and then becomes blank....i later on came to know on the internet that i hadnt enabled 'oem unlock' on 'developer options' before rooting. I sent the phone to samsung for repair and they sent it back to me today saying that the phone is beyond repair because it was rooted, though i hadnt mentioned to them that i had rooted the phone. How do i get my phone to work again? I need it very badly for work purposes. Can somebody help me with this....
You need to flash stock rom for your device via odin.
røbin said:
you need to flash stock rom for your device via odin.
Click to expand...
Click to collapse
hello robin....thanks for the reply my brother.....can you help me with links of the firmware files for sm-g360az brother? I searched on the iternet, but im unable to find them for free....
alvcross said:
hello robin....thanks for the reply my brother.....can you help me with links of the firmware files for sm-g360az brother? I searched on the iternet, but im unable to find them for free....
Click to expand...
Click to collapse
It is hard to find stock firmware for your device but check this linkhttp://www.easy-firmware.com/index.php?a=browse&b=category&id=3228 Did you visited this page?
røbin said:
it is hard to find stock firmware for your device but check this linkhttp://www.easy-firmware.com/index.php?a=browse&b=category&id=3228 did you visited this page?
Click to expand...
Click to collapse
yes my brother....i did visit that page before.....but it says that downloads are available only to paid users....
alvcross said:
yes my brother....i did visit that page before.....but it says that downloads are available only to paid users....
Click to expand...
Click to collapse
https://samsung-firmware.org/model/SM-G361F/ both device have same spec.So you can try this version.
røbin said:
https://samsung-firmware.org/model/sm-g361f/ both device have same spec.so you can try this version.
Click to expand...
Click to collapse
ohhh wooowww....thank you soo soo soo very much my brother.....but will this cause any problems to the sm-g360az phone?
alvcross said:
ohhh wooowww....thank you soo soo soo very much my brother.....but will this cause any problems to the sm-g360az phone?
Click to expand...
Click to collapse
Can't 100% guarantee you that it will work or not.Both device have same spec so it should work but one have 2mp font camera and other have 1.9mp camera. It shouldn't be a big problem I think.
And can you also tell me weather you were taking about sm-g361f or sm-g360f brother? Can you mention the exact model number I should try flashing with? THERE ARE MANY MODELS IN SM-G360....WHICH ONE WOULD SUIT THE BEST BROTHER?
alvcross said:
And can you also tell me weather you were taking about sm-g361f or sm-g360f brother? Can you mention the exact model number I should try flashing with? THERE ARE MANY MODELS IN SM-G360....WHICH ONE WOULD SUIT THE BEST BROTHER?
Click to expand...
Click to collapse
All the version are same.Those files are from different region. So you can choose any region.but download lte version only.
røbin said:
all the version are same.those files are from different region. So you can choose any region.but download lte version only.
Click to expand...
Click to collapse
ohhh....wowwww....okay my brother....ill download the firmware...flash the files and let you know....thank you so very much for the help my brother....god bless you....
alvcross said:
ohhh....wowwww....okay my brother....ill download the firmware...flash the files and let you know....thank you so very much for the help my brother....god bless you....
Click to expand...
Click to collapse
Don't just say thanks.Hit the thanks button If you thik I helped you
røbin said:
don't just say thanks.hit the thanks button if you thik i helped you
Click to expand...
Click to collapse
yes my brother....i did just that....i downloaded the firmware files and tried to flash with odin....but the flash doesnt proceed....it gets stuck in initialization cause of the locked bootloader....i hadnt enabled 'oem unlock' when the phone was working....and also in the download mode it shows 'secureboot - enabled'.....so the locked bootloader is not allowing odin to flash.....the phone is being recognized by adb and it shows up with a serial number as recovery in the adb console....is there any way i could enable oem unlock and unlock the bootloader through adb commands?
alvcross said:
yes my brother....i did just that....i downloaded the firmware files and tried to flash with odin....but the flash doesnt proceed....it gets stuck in initialization cause of the locked bootloader....i hadnt enabled 'oem unlock' when the phone was working....and also in the download mode it shows 'secureboot - enabled'.....so the locked bootloader is not allowing odin to flash.....the phone is being recognized by adb and it shows up with a serial number as recovery in the adb console....is there any way i could enable oem unlock and unlock the bootloader through adb commands?
Click to expand...
Click to collapse
You need to install twrp via odin and from twrp you need to do a full factory reset(data,cache,delvik,phone memory).after that try again to flash stock rom via odin.Here is the twrp link for your device http://teamw.in/devices/samsunggalaxycoreprimequalcomm.html
Røbin said:
You need to install twrp via odin and from twrp you need to do a full factory reset(data,cache,delvik,phone memory).after that try again to flash stock rom via odin.Here is the twrp link for your device http://teamw.in/devices/samsunggalaxycoreprimequalcomm.html
Click to expand...
Click to collapse
Oh my god.....wonder of wonders my brother.....i downloaded TWRP from the link you gave me and flashed it with odin and to my surprise the phone booted up to the home screen after flashing was done.....the phone is back and working now.....wooowwwww.....thank you soooo soooo soooo very much my brother.....this forum needs many good hearted and wonderful people like you....Words cant express how happy I am.....thank you....thank you....thank you my brother....:victory:
alvcross said:
Oh my god.....wonder of wonders my brother.....i downloaded TWRP from the link you gave me and flashed it with odin and to my surprise the phone booted up to the home screen after flashing was done.....the phone is back and working now.....wooowwwww.....thank you soooo soooo soooo very much my brother.....this forum needs many good hearted and wonderful people like you....Words cant express how happy I am.....thank you....thank you....thank you my brother....:victory:
Click to expand...
Click to collapse
I'm also very happy that I helped you and Now you get your bricked phone back to normal.
Røbin said:
I'm also very happy that I helped you and Now you get your bricked phone back to normal.
Click to expand...
Click to collapse
but there is still some problem brother.....after flashing twrp 3 with odin the phone booted up to the home screen anad all my apps and settings were intact....but when i restarted the phone again....it showed the boot screen and then went blank.....i reflashed the twrp with odin again and it booted up to the home screen.....this time I MADE A FACTORY RESET AND AGAIN THERE WAS THE SAME PROBLEM.....PHONE WAS NOT BOOTING UP TO THE HOME SCREEN.....I REFLASHED TWRP AGAIN....BOOTED UP TO HOME SCREEN AND TRIED SOFTWARE UPDATES....BUT I GOT A MESSAGE SAYING THAT THE PHONE WAS MODIFIED IN AN UNAUTHORIZED WAY AND THAT I COULD TRY USING KIES FOR UPDATES.....
THE BOOTLOADER SEEMS TO BE DAMAGED.....CAN YOU TELL ME HOW TO UNLOCK THE BOOTLOADER WITH ADB BROTHER? WHEN I TYPE REBOOT RECOVERY THROUGH ADB, THE PHONE REBOOTS AND WHEN IT COMES TO THE TWRP RECOVERY SCREEN, IT TURNS BLANK....SO IM UNABLE TO GO INTO TWRP TO WIPE SOME STUFF AS YOU HAD SUGGESTED EARLIER....SHOULD I TRY CWM?
alvcross said:
but there is still some problem brother.....after flashing twrp 3 with odin the phone booted up to the home screen anad all my apps and settings were intact....but when i restarted the phone again....it showed the boot screen and then went blank.....i reflashed the twrp with odin again and it booted up to the home screen.....this time I MADE A FACTORY RESET AND AGAIN THERE WAS THE SAME PROBLEM.....PHONE WAS NOT BOOTING UP TO THE HOME SCREEN.....I REFLASHED TWRP AGAIN....BOOTED UP TO HOME SCREEN AND TRIED SOFTWARE UPDATES....BUT I GOT A MESSAGE SAYING THAT THE PHONE WAS MODIFIED IN AN UNAUTHORIZED WAY AND THAT I COULD TRY USING KIES FOR UPDATES.....
THE BOOTLOADER SEEMS TO BE DAMAGED.....CAN YOU TELL ME HOW TO UNLOCK THE BOOTLOADER WITH ADB BROTHER? WHEN I TYPE REBOOT RECOVERY THROUGH ADB, THE PHONE REBOOTS AND WHEN IT COMES TO THE TWRP RECOVERY SCREEN, IT TURNS BLANK....SO IM UNABLE TO GO INTO TWRP TO WIPE SOME STUFF AS YOU HAD SUGGESTED EARLIER....SHOULD I TRY CWM?
Click to expand...
Click to collapse
If locked bootloader causing this problem than you might want to try this http://unlock-bootloader.net/how-to/unlock-bootloader-samsung-galaxy-core-prime/ Follow the guide and unlock bootloader to see if this problem solve for good.
There is Android Marshmallow custom rom for your device too
Røbin said:
If locked bootloader causing this problem than you might want to try this http://unlock-bootloader.net/how-to/unlock-bootloader-samsung-galaxy-core-prime/ Follow the guide and unlock bootloader to see if this problem solve for good.
There is Android Marshmallow custom rom for your device too
Click to expand...
Click to collapse
thanks for the link brother.....but that website is a fake website with fake android 6 custom rom links....
brother....do you have a SM-G360AZ MOBILE? CAN YOU INSTALL FLASHIFY ON YOUR PHONE AND TAKE A BACKUP IMAGE OF THE STOCK RECOVERY AND UPLOAD A LINK HERE....
TWRP IS NOT WORKING....THE PHONE REACHES RECOVERY AND THEN TURNS BLANK....
alvcross said:
thanks for the link brother.....but that website is a fake website with fake android 6 custom rom links....
brother....do you have a SM-G360AZ MOBILE? CAN YOU INSTALL FLASHIFY ON YOUR PHONE AND TAKE A BACKUP IMAGE OF THE STOCK RECOVERY AND UPLOAD A LINK HERE....
TWRP IS NOT WORKING....THE PHONE REACHES RECOVERY AND THEN TURNS BLANK....
Click to expand...
Click to collapse
Why do you need stock recovery?There's no stock recovery available for your device.Try to instell different twrp version for your phone.

Phone stuck in bootloop for no apparent reason.

So recently, my phone went into bootloop for no reason. I was using stock firmware, no root or modifications of any sort.
I'm not able to access recovery mode, boot the phone(in safe mode as well). The only screen I was able to get to was download mode.
However, I don't want to flash custom firmware on it because that would make me lose my data.
Help of any kind to help me backup my files or fix the problem would be appreciated.
UPDATE: I was able to install TWRP onto the phone, but it freezes after the first of seconds of boot.
Is there any important data on the phone? If not, did u factory reset it?
Akshat2100 said:
Is there any important data on the phone? If not, did u factory reset it?
Click to expand...
Click to collapse
There's a lot of important data on the phone. I can't possibly lose it.
aryan.arora180 said:
There's a lot of important data on the phone. I can't possibly lose it.
Click to expand...
Click to collapse
Did you flash the correct version of twrp?
callumbr1 said:
Did you flash the correct version of twrp?
Click to expand...
Click to collapse
Yeah, I even tried multiple versions of TWRP. I tried arter97's TWRP recovery as well and it didn't freeze but it wasn't performing any opeartions(factory reset, installing ROMs, MTP)
aryan.arora180 said:
Yeah, I even tried multiple versions of TWRP. I tried arter97's TWRP recovery as well and it didn't freeze but it wasn't performing any opeartions(factory reset, installing ROMs, MTP)
Click to expand...
Click to collapse
V 3.1.1-0 is the correct version.
Have you tried flashing stock firmware?
callumbr1 said:
V 3.1.1-0 is the correct version.
Have you tried flashing stock firmware?
Click to expand...
Click to collapse
I tried flashing stock firmware as well. It ends up in a bootloop only.
aryan.arora180 said:
I tried flashing stock firmware as well. It ends up in a bootloop only.
Click to expand...
Click to collapse
Sounds like your flashing the wrong firmware. What's your model? G925? And Android version and region?
callumbr1 said:
Sounds like your flashing the wrong firmware. What's your model? G925? And Android version and region?
Click to expand...
Click to collapse
It's the G925I - the international variant. I bought the phone in India and it was latest on nougat.
Should I restore the Marshamllow version instead?
aryan.arora180 said:
It's the G925I - the international variant. I bought the phone in India and it was latest on nougat.
Should I restore the Marshamllow version instead?
Click to expand...
Click to collapse
http://updato.com/firmware-archive-select-model?record=304ED2348A3811E7963AFA163EE8F90B
Try this one first mate
callumbr1 said:
http://updato.com/firmware-archive-select-model?record=304ED2348A3811E7963AFA163EE8F90B
Try this one first mate
Click to expand...
Click to collapse
Sure, I'll try it out.
callumbr1 said:
http://updato.com/firmware-archive-select-model?record=304ED2348A3811E7963AFA163EE8F90B
Try this one first mate
Click to expand...
Click to collapse
Hey sorry for the late reply... I had to travel and bought the OP5 in a hurry.
Tried flashing the firmware you gave, but it had the same result - bootloop.
Any luck? Mine just did the same thing this morning. To be a little more clear, my ph-1 (USA, Sprint purchased) ran the battery out last night. When I plugged it in, it bootlooped. I entered boot loader and shut it down. Fast forward - charged all night, no difference. Bootloader is locked and there is no recovery (phone hasn't been modified at all, unless you count Holy Diver as a ring tone
CtDMonet said:
Any luck? Mine just did the same thing this morning. To be a little more clear, my ph-1 (USA, Sprint purchased) ran the battery out last night. When I plugged it in, it bootlooped. I entered boot loader and shut it down. Fast forward - charged all night, no difference. Bootloader is locked and there is no recovery (phone hasn't been modified at all, unless you count Holy Diver as a ring tone
Click to expand...
Click to collapse
Sorry for the late reply.
I gave it to a service center. They simply replaced the battery and it was working fine for a day. The next day the same things started happening again, and I sent it back to them.

full update cust/preloader

Hi all,
Im in trouble with my phone beacuse im in demo mode, is there any option to full update.
Ps. I updated to 9.1, but cust rom and preloader are same (maybe cause bootloader is locked, frp unlocked).
I need your help, please!
I check my model I used hisuite method.
basic: 9.1.0.300
cust: 9.1.0.21
preload: 9.0.0.17
As you see preload stick in 9.0. I guess that is kind normal.
PS. You can check before you flash if using Hisuite.
If your model is supported by Hisuite nvm
1. If not,edit C:\Users\yourusername\AppData\Local\HiSuite\userdata\UpdateDogDev\HiSuiteConfig.xml
by replacing either LYA-L09/LYA-L29 to your specific model and then use system repair function via fastboot.
2. Go check C:\Users\yourusername\Documents\HiSuite\ROM
you can see basic/cust/preload version officially supported if some still in 9.0 then It meant to be 9.0.
Good luck
q13017 said:
I check my model I used hisuite method.
basic: 9.1.0.300
cust: 9.1.0.21
preload: 9.0.0.17
As you see preload stick in 9.0. I guess that is kind normal.
PS. You can check before you flash if using Hisuite.
If your model is supported by Hisuite nvm
1. If not,edit C:\Users\yourusername\AppData\Local\HiSuite\userdata\UpdateDogDev\HiSuiteConfig.xml
by replacing either LYA-L09/LYA-L29 to your specific model and then use system repair function via fastboot.
2. Go check C:\Users\yourusername\Documents\HiSuite\ROM
you can see basic/cust/preload version officially supported if some still in 9.0 then It meant to be 9.0.
Good luck
Click to expand...
Click to collapse
Does this mean it will remove the demo mode?
Shkelqim.rexhepi said:
Does this mean it will remove the demo mode?
Click to expand...
Click to collapse
My, this is the same as the photo. How is yours? and how is this mode of demonstration? How did you get into it?
douglasmietto said:
My, this is the same as the photo. How is yours? and how is this mode of demonstration? How did you get into it?
Click to expand...
Click to collapse
Its the almost the same... You got same version of custom and preloader
did you tried to just unstick demo mod under developper options??
Why your phone is in demo mod? what's happened?
Shkelqim.rexhepi said:
Hi all,
Im in trouble with my phone beacuse im in demo mode, is there any option to full update.
Ps. I updated to 9.1, but cust rom and preloader are same (maybe cause bootloader is locked, frp unlocked).
I need your help, please!
Click to expand...
Click to collapse
You can turn off demo mode in developer option.

lg g8x model number has changed after android 11 update

My lg g8x lmg850emw that had android 10 has now tuned into a model lmg850um when the device updated to android 11
i then re installed the android 10 firmware and it goes back to correct model
And even when updating through lg bridge, the model is always wrong when on android 11.
would be amazing if someone can help or knows anything about this issue.
Maybe ill just send the phone back.
Or does something like this not happen naturally haha?
Yes - I have the same issue, flashed to android 11 kdz from here: https://lg-firmwares.com/lg-lmg850emw-firmwares/ now my phone model is UM.
Where did you buy the phone from? I bought it from aliexpress refurbished, the seller must have done something to these phones.
One thing I did notice is that if I flash a different abl file onto it, then it reads correctly as EMW.
rash.m2k said:
Yes - I have the same issue, flashed to android 11 kdz from here: https://lg-firmwares.com/lg-lmg850emw-firmwares/ now my phone model is UM.
Where did you buy the phone from? I bought it from aliexpress refurbished, the seller must have done something to these phones.
One thing I did notice is that if I flash a different abl file onto it, then it reads correctly as EMW.
Click to expand...
Click to collapse
Yes it was from aliexpress refurbished, I've sent it back already but good to know that changing the abl fixes it thank you!
rash.m2k said:
Yes - I have the same issue, flashed to android 11 kdz from here: https://lg-firmwares.com/lg-lmg850emw-firmwares/ now my phone model is UM.
Where did you buy the phone from? I bought it from aliexpress refurbished, the seller must have done something to these phones.
One thing I did notice is that if I flash a different abl file onto it, then it reads correctly as EMW.
Click to expand...
Click to collapse
Hi rash.m2k, I am in the same boat. Could you please advise which abl you flashed?
xmchen_ad said:
Hi rash.m2k, I am in the same boat. Could you please advise which abl you flashed?
Click to expand...
Click to collapse
For fixing the model code? Or to root?
rash.m2k said:
For fixing the model code? Or to root?
Click to expand...
Click to collapse
Both would be handy if you could provide them!
Thanks in advance
rash.m2k said:
Yes - I have the same issue, flashed to android 11 kdz from here: https://lg-firmwares.com/lg-lmg850emw-firmwares/ now my phone model is UM.
Where did you buy the phone from? I bought it from aliexpress refurbished, the seller must have done something to these phones.
One thing I did notice is that if I flash a different abl file onto it, then it reads correctly as EMW.
Click to expand...
Click to collapse
Good to hear about the resolution. Can share the link of abl file?
Eriko3o said:
Both would be handy if you could provide them!
Thanks in advance
Click to expand...
Click to collapse
doji-8888 said:
Good to hear about the resolution. Can share the link of abl file?
Click to expand...
Click to collapse
I got the ABL from here: https://forum.xda-developers.com/t/...nlock-and-magisk-root-using-firehose.4221793/
The thing is not to worry even if you F it up - you can always flash the ABL from the KDZ file.
What I'd recommend you do is remember which KDZ you flashed and keep a copy of it.
My frustation was I couldn't get into fastboot mode at all. When I flashed this abl - suddenly flashboot worked (wtf!!!) the next issue was I couldn't get the oem device-id that LG tells you to get - just wasn't working.
In the end I thought what the hell lets just run the unlock bootloader command and voila, bootloader unlocked as simple as that! Rooting it easy once you have fastboot or EDL mode as you dump the ABL file and use magisk to patch it and then reflash back to the phone (both boot_a and boot_b)
rash.m2k said:
I got the ABL from here: https://forum.xda-developers.com/t/...nlock-and-magisk-root-using-firehose.4221793/
The thing is not to worry even if you F it up - you can always flash the ABL from the KDZ file.
What I'd recommend you do is remember which KDZ you flashed and keep a copy of it.
My frustation was I couldn't get into fastboot mode at all. When I flashed this abl - suddenly flashboot worked (wtf!!!) the next issue was I couldn't get the oem device-id that LG tells you to get - just wasn't working.
In the end I thought what the hell lets just run the unlock bootloader command and voila, bootloader unlocked as simple as that! Rooting it easy once you have fastboot or EDL mode as you dump the ABL file and use magisk to patch it and then reflash back to the phone (both boot_a and boot_b)
Click to expand...
Click to collapse
You flash engineering abl and use smartphone with it?
INFERNO777 said:
You flash engineering abl and use smartphone with it?
Click to expand...
Click to collapse
What do you mean?
rash.m2k said:
What do you mean?
Click to expand...
Click to collapse
I got a phone with android 10 850emw after updating to android 11 the model has changed 850um. Please can you tell me how to return the model back
INFERNO777 said:
I got a phone with android 10 850emw after updating to android 11 the model has changed 850um. Please can you tell me how to return the model back
Click to expand...
Click to collapse
I think the only way to do that is to flash a different ABL file into it - however does it really matter? Mine says G850UM but functions fine (dual sim etc).
I'm having a similar issue but I have the US Unlocked variant (G850QM). I can't update the device because it's saying I can't change the model from T-MOBILE. Tried both LG Bridge and LGUP. OTA portion of the phone says no update.
It shows everywhere that it's the QM model. No idea what to do. I purchased it second hand and it was already on Android 11.
Edit: Fixed it, see this thread, I hyperlinked to the start of my post: [Tutorial] Crossflash, Bypass OPID Mismatched Error

Question RMX2202 (REALME GT 5G) IS COMPLETELY DEAD.

My Device was on firmware version RMX2202_11.C.15 GDPR, it wasnt the latest one and software update wasn't pushing the latest ota package for my device which is RMX2202_11.C.25 GDPR.
So, i decided to rollback to RUI2.0 and update again and that might solve the problem. i unlocked my bootloader, booted on twrp, flashed rollback "RMX2202_11.A.17 GDPR" package, wipe data, boot into system.
All good till now, software update pushed me 700MB ota package, i download and installed it. Device asks for reboot i rebooted my device , device went off. DEAD no sign of life. only EDL MODE.
no recovery, no bootloader, no vibrate , no bootloop , completely DEAD. Then i took it to realme service center, they tried to flash my device , they got some error they returned my phone and said we cant repair because your device is rejecting firmware.
i attached the msm tool error. (WCSM communication failed (WCSM code: 4009 SW version of this package is not found in WCSM.)
PLEASE HELP ME!
Try to Change A computer?
DestoryG said:
Try to Change A computer?
Click to expand...
Click to collapse
i tried from different computers. 4 5 may be
Can i try with your phone ?
xuanhoang1811 said:
Can i try with your phone ?
Click to expand...
Click to collapse
Thanks for your reply.
I fixed my phone with the help of some technician online, he successfully flashed c.15 firmware using oplus flash tool v4.1.0.
Thank god and thanks to technician, my phone came back to life again.
But still my phone's software update is not pushing ota package. If you have solution please suggest me.

			
				
XxMinixX said:
View attachment 5766719
Click to expand...
Click to collapse
Mine still stuck at 11.c.05 i use this phone for about 3 months but still no updates
XxMinixX said:
Mine still stuck at 11.c.05 i use this phone for about 3 months but still no updates
Click to expand...
Click to collapse
i am able to update my phone to the latest ota. i can help you if you want
Ashim Adhikari said:
Thanks for your reply.
I fixed my phone with the help of some technician online, he successfully flashed c.15 firmware using oplus flash tool v4.1.0.
Thank god and thanks to technician, my phone came back to life again.
But still my phone's software update is not pushing ota package. If you have solution please suggest me.
Click to expand...
Click to collapse
Can you recommend me your technician? My GT is stuck in boot loop. Technician here says it has no recovery or something similar, and is still waiting for a recovery file for GT for it to be fixed. Thanks!
vlmapalo said:
Can you recommend me your technician? My GT is stuck in boot loop. Technician here says it has no recovery or something similar, and is still waiting for a recovery file for GT for it to be fixed. Thanks!
Click to expand...
Click to collapse
his website is MOD EDIT: URL REMOVED | READ AND FOLLOW XDA FORUM RULES
Ashim Adhikari said:
his website is https://www.kreatifintech.com/
Click to expand...
Click to collapse
paid service advertising, you have been reported
Ashim Adhikari said:
his website is MOD EDIT: URL REMOVED | READ AND FOLLOW XDA FORUM RULES
Click to expand...
Click to collapse
All this thread maked for advertise some indian guys)))

Categories

Resources