After restoring an backup via TWRP I had to remove/bypass lockscreen with TWRP to access my android. Still I found my fingerprint reader not working. I fixed this by deleting the fingerprint profile with TWRP.
Symptoms of the issue I had:
Fingerprint is not working to unlock the phone. Lockscreen gives me an error about missing fingerprint hardware.
I can't add new fingerprints. The fingerprint wizard gives me an error message "Enrollment was not completed" and closes the wizard
How to remove the pin/pattern you can find here: https://forum.xda-developers.com/android/software-hacking/remove-lockscreen-recovery-t3530008
Solution for fingerprinter:
Boot into TWRP
Go to advanced>filemanager to acces the files in your phone.
Enter the folder /data/system/user/0
Delete following files: ./fpdata/user.db, settings_fingerprint.xml
Reboot to system and set up new fingerprints with the fingerprint wizard
Everything should work normal
Hope it helps
Thanks!
Only works until the following reboot. So you need to go through the procedure again. Soft reboot leave the fingerprints intact. Tested on Moto G5.
Thanks a lot man! Saved myself from clean flashing on my Oneplus 5!!
Thanks!
On my HTC A9 I had the message "PIN required to enable fingerprint reader". It is an at&t a9 that I've rooted and running the unlocked developer version. I used these steps in TWRP and my fingerprint reader was fixed.
Legend! Thank you for posting this! Saved me from factory resetting my HTC 10!
unfortunatley my fpdata folder is empty... but I still get this "Enrollment was not completed" when around 80% done.... It looks like the very last fingerprint touch is needed. However the whole process still looks broken because sometimes it accept when I touch next time it roll back. It didn't behave like that on stock. Is there any way to fix this problem except flash stock ? BTW I'm now on custom 7.1.2 ROM Resurrection Remix N v5.8.5
Go to /data/system and delete locksettings.db
And then go to /data/system/users/0/settings_fingerprint.xml and delete it.
Worked for me on AEX Oreo.
I sent my OnePlus 3T in for an RMA, when I received it back and restored the TWRP backup my FP was not working anymore. Tried this fix and everything is fine again
Still works after a reboot
thanks konzi.. couldn't remove fingerprints (lineage os 15.1 on redmi note 4 mido)
I gave root access to my file explorer app (es file explorer) and renamed those files (to .bak) and it fixed the issue for me.
I did as it said on OP, but it didn't work :/
This does not seem to work under Android Pie. Only the lockscreen.db file is present, but the fpdata folder is empty and I am unable to remove old fingerprints in settings.
Any ideas.
I hate to revive an old dead thread, but I can confirm that this DOES work on Android Pie (9.0) 181005.003 October security release. Thank you so much OP!!!
One step that may have not been included is to be sure to "mount" the "data" partition or you may not be able to properly "write" and/or delete and/or display the right files...
The user.db file didn't exist for me, but deleting the settings_fingerprint.xml solved the problem for me m
can't delete fingerprint
stitchyman said:
thanks konzi.. couldn't remove fingerprints (lineage os 15.1 on redmi note 4 mido)
I gave root access to my file explorer app (es file explorer) and renamed those files (to .bak) and it fixed the issue for me.
Click to expand...
Click to collapse
Hey bro! Actually I'm using dotos v2.5 on my redmi note 4 and I'm facing problem in deleting fingerprint . plz help
---------- Post added at 08:33 AM ---------- Previous post was at 08:30 AM ----------
stitchyman said:
thanks konzi.. couldn't remove fingerprints (lineage os 15.1 on redmi note 4 mido)
I gave root access to my file explorer app (es file explorer) and renamed those files (to .bak) and it fixed the issue for me.
Click to expand...
Click to collapse
Hey bro! Actually I'm using dotos v2.5 on my redmi note 4 and I'm facing problem in deleting fingerprint . plz help . and also can't add more because only 5 could be added .
appy.79 said:
Go to /data/system and delete locksettings.db
And then go to /data/system/users/0/settings_fingerprint.xml and delete it.
Worked for me on AEX Oreo.
Click to expand...
Click to collapse
Thank you, this saved me from having to do a full clean install.
I confirm this worked on Android Pie (9)
HTC 10. Not working for me. It cleared my fingerprints, but I am unable to register any new ones. It instantly claims "Fingerprint setup was cancelled. Please try again."
Cyber Akuma said:
HTC 10. Not working for me. It cleared my fingerprints, but I am unable to register any new ones. It instantly claims "Fingerprint setup was cancelled. Please try again."
Click to expand...
Click to collapse
I don't know anything about the HTC's...but have you "reset-ted" or, if you have an unlocked bootloader, maybe re-flashing the Full Factory image -- I know with the Pixel's, you can reflash the Full Factory image without wiping the device...
Good luck and hope this helps...
appy.79 said:
Go to /data/system and delete locksettings.db
And then go to /data/system/users/0/settings_fingerprint.xml and delete it.
Worked for me on AEX Oreo.
Click to expand...
Click to collapse
can confirm working on crDroid 9.0 thanks!
simplepinoi177 said:
I don't know anything about the HTC's...but have you "reset-ted" or, if you have an unlocked bootloader, maybe re-flashing the Full Factory image -- I know with the Pixel's, you can reflash the Full Factory image without wiping the device...
Good luck and hope this helps...
Click to expand...
Click to collapse
Forgot to reply earlier. Well, I am attempting to avoid doing a reset, since I just did a backup restore, resetting the phone would be counter-productive.
Regardless, I found the issue, there was a backup file for the prints too, deleting that fixed everything.
Following what appy.79 told solved for me too... crush on lockscreen setting and deleted fingerprints all OK now
Related
I patched the classes.dex and no more passcode after the lockscreen.
Since Mail.apk is a system app you can't just replace the apk... so you'll need to do it in recovery.
Instructions:
1. First you need to remove all exchange accounts (in SETTINGS -> ACCOUNTS & SYNC) and then remove the PIN in SETTINGS - SECURITY.
2. Then boot into recovery and install the Mail.apk - patched.zip file (attached).
3. Reboot and add your exchange account normally... it will still ask you to activate the security settings but no password will be required.
Enjoy not having to type a password to unlock your EVO 3D!!!
--- Found this info to patch the classes.dex here: http://forum.xda-developers.com/showpost.php?p=10582547&postcount=335
Still requires the password.
kraminc said:
Still requires the password.
Click to expand...
Click to collapse
Same here.
Sent from my PG86100 using XDA App
Definitely still requires the password... Anyway to get this working? The whole password thing sucks
SHOTS FIRED!!! From 3 Dimensions!
Really sorry guys, I had the old classes.dex file for some reason. This is fixed now! I reuploaded the file in the OP.
You'll still need to remove the exchange account and remove the lock before you install the zip from recovery.
YACO said:
Really sorry guys, I had the old classes.dex file for some reason. This is fixed now! I reuploaded the file in the OP.
You'll still need to remove the exchange account and remove the lock before you install the zip from recovery.
Click to expand...
Click to collapse
Confirmed working now, 100% Thank you so very much, I can't tell how much the password thing pissed me off!
I just followed the instructions, downloaded the file to my phone, moved it to my root of my sd card, renamed it from -1.zip to exchange.zip flashed it, rebooted and tried to add it, and no go still have to add a pin. I looked in the zip file and I don't see a classes.dex file at all. Not sure what is up, but I am on stock ROM, have S-OFF, and Recovery, no issues flashing it through recovery but still required to put in a PIN. I'd LOVE to have this working. I will be going to a new ROM soon, I just haven't decided which one I want.
All I can say is keep trying, I have it working for.me right now, but I flash alot of roms, so I feel sometimes it works and other times it doesnt....try not clearing cache or dalvik, installing then rebooting. It will still tell you it needs a pass but when you press activate it will bring you right back to finish your email set up....
SHOTS FIRED!!! From 3 Dimensions!
I suspect it is because I am still on stock ROM, and it is Odexed. Don't know a lot about it, but that is my suspicion. I'll probably flash a ROM this weekend and then try it again.
do you know if this will help to fix the stock mail.apk if it is having issues?
i have tried flashing different roms and still get a exchange activesync mail application which doesn't want to sync correctly.
bump........
mail.apx compatibility
Will this patch also work on v2.3.4?
Thanks,
-Z-
zyrzox said:
Will this patch also work on v2.3.4?
Thanks,
-Z-
Click to expand...
Click to collapse
I don't believe so
Sent from my PG86100 using xda premium
I got my Honor 9 set up with the all in one guide (https://forum.xda-developers.com/honor-9/how-to/one-guide-recovery-os-roms-t3661829). Except I could not flash supersu because in the data/data folder, I just got some weird named folders and could not find my file.
That tells me I am encrypted, right?
Now I entered TWRP and sideloaded supersu via adb - and I got root. So now my question is, am I encrypted AND got root running? Can you confirm this? I found no way inside Android on how to see if I am actually encrypted or not.
I didn't flash anything with fileencryption disabled in fstab etc...
I believe the latest version of EMUI encrypts your device by default to protect your personal data. You would probably decrypt your device yourself in the Settings > Security
But how can I check if I'm really encrypted or decrypted? What I can tell for sure is that I got root. But that would mean that the root guide can be updated to read supersu is working with data encrypted
Rommco05, I already know that I'm definitely rooted, but unsure on how to check the encryption status.
If I remeber good, there's an option in settings when you encrypt the phone (I don't remember where exactly)
This may help you
Ok so I sideloaded beta SuperSU 2.82 SR3 and I am rooted now. And I would say encrypted as if I browse /data/data through TWRP everything is just a bunch of random characters. Also phone is locked by fingerprint and password.
It can be correct
Zuzler said:
I got my Honor 9 set up with the all in one guide (https://forum.xda-developers.com/honor-9/how-to/one-guide-recovery-os-roms-t3661829). Except I could not flash supersu because in the data/data folder, I just got some weird named folders and could not find my file.
That tells me I am encrypted, right?
Now I entered TWRP and sideloaded supersu via adb - and I got root. So now my question is, am I encrypted AND got root running? Can you confirm this? I found no way inside Android on how to see if I am actually encrypted or not.
I didn't flash anything with fileencryption disabled in fstab etc...
Click to expand...
Click to collapse
Could you please tell me what you did in detail after you unlocked your phone? At the moment i have the eu version but the b180 version with unlocked bootloader. Do you think it also works with the b180? And can you provide the links where you downloaded it, because there are like 10 Million different Versions of supersu and twrp. i bless you if you tell me
I soft bricked my H9 many times, so can you confirm me pls if :
- My H9 has the stock rom
- Bootloader unlocked and frp unlocked
- TWRP is installed but i see sdcard with encrypted names
If i used "adb sideload SuperSU-v2.82-201705271822.zip" in TWRP, i will have root and i loose nothing in the phone?
Thnaks for answer
i need this information too.
if i install by twrp the file SR3-SuperSU-v2.82-SR3-20170813133244.zip , i have root but i lose navigation button and camera flash...
now i have B183 version....
which version and how have to install Supersu for have root and all working?
im tired to go back everytime to b120....
So, after an annoying girlfriend and a boring Sunday at work I have pinpointed the solution to a very common issue with LG phones have after being flashed back from custom ROM's.
You're going to need Magisk Manager and Root.
1) Remove all fingerprints from fingerprint & security.
2) Remove lock screen (select none)
3) Download and add Magisk SELinux Manager:
https://forum.xda-developers.com/attachment.php?attachmentid=4440305
4) Open Magisk, go to Modules section hit ( + ) button and long-press the SELinux zip you just download. Now, hit open.
5) Follow the prompt, once asked to enter selection hit Permissive mode. Reboot and re-add lock screen and fingerprint.
Note: you may need to add the same finger twice to get it to work the first time, once working delete all fingerprints and re-enter.
brad2192 said:
So, after an annoying girlfriend and a boring Sunday at work I have pinpointed the solution to a very common issue with LG phones have after being flashed back from custom ROM's.
You're going to need Magisk Manager and Root.
1) Remove all fingerprints from fingerprint & security.
2) Remove lock screen (select none)
3) Download and add Magisk SELinux Manager:
https://forum.xda-developers.com/attachment.php?attachmentid=4440305
4) Open Magisk, go to Modules section hit ( + ) button and long-press the SELinux zip you just download. Now, hit open.
5) Follow the prompt, once asked to enter selection hit Permissive mode. Reboot and re-add lock screen and fingerprint.
Note: you may need to add the same finger twice to get it to work the first time, once working delete all fingerprints and re-enter.
Click to expand...
Click to collapse
There is an easier fix posted on my lineage thread. I specify the exact files to delete to remove saved fingerprints.
You should find it and add it to your OP here
Travisholt92 said:
There is an easier fix posted on my lineage thread. I specify the exact files to delete to remove saved fingerprints.
You should find it and add it to your OP here
Click to expand...
Click to collapse
That method does not work, I had tried that many times.
brad2192 said:
That method does not work, I had tried that many times.
Click to expand...
Click to collapse
It's the only persisting fp registry files, they only store to that location. If that isn't working it's because you didn't clean install after wiping them out. I've tested it myself after purposely not wiping fingerprint data before a clean install.
Travisholt92 said:
It's the only persisting fp registry files, they only store to that location. If that isn't working it's because you didn't clean install after wiping them out. I've tested it myself after purposely not wiping fingerprint data before a clean install.
Click to expand...
Click to collapse
I did clean install with wiping the data lol, that method worked 2 Stock ROM versions ago. This method works now.
Worked!
This method worked perfectly on my lg k20 plus. Thanks!
Closed per OP request
I'M NOT RESPONSIBLE FOR ANY DAMAGE AND/OR DATA LOSS AS A RESULT OF FLASHING THIS ROM !!!
PLEASE PERFORM FULL BACKUP IN THE MICRO SD CARD OR IN AN EXTERNAL STORAGE BEFORE YOU TRY !!!
Do you need reliability and predictability? Then better stay with THIS ROM
I have decided to create a separate thread because:
- I would like to distinguish PIE BETA bug reports from my normal (OREO stable) thread, mentioned above
- It is normal that there will be definitely much more "bad reports" here, because most of them will be "beta related"
This thread will be closed when Samsung will release stable Android Pie (One UI)
Everything you will need to know about DevBase ROM in general - you will find in my stable thread (mentioned above)
Differences comparing to stable Oreo DevBase ROM:
- No AppLock (yet)
- No Xposed (we need to wait for rovo89)
Note 9 (SM-N960F/DS):
>> N960FXXU2CRLT_DevBase_v6.0.zip << (updated Jan-05, more info HERE)
Click to expand...
Click to collapse
Dirty flash over my Oreo DevBase ROM SHOULD WORK WITHOUT ISSUES but before you try - I would highly recommend you to set default (stock) theme and default (stock) icons !!! However - I would recommend you clean install (Wipe -> Swipe to Factory Reset is enough)
Known issues:
- [CLEAN INSTALL] Magisk Manager may not appear after clean install despite Magisk has been installed without errors during install - if you notice that there is no Magisk Manager - DO NOT flash Magisk, it is enough to (re)install Magisk Manager as normall app - use ATTACHMENT (it is original apk from Magisk v18.0)
- OEM unlock toggle seems to be disabled in the Developer Options but it is not true (otherwise you would not be able to use TWRP and this ROM). It is side effect of protection I put in the kernel against "KG State: Prenormal" in the DM mode. It is not real issue, just ignore it.
Thanks to:
- all users mentioned in my main thread
- @asc1977 for share me N960F pure dump
- @dr.ketan for share me N960F modem dump
I'm gonna try it now but may i know whether is this rom de-bloated? Looks like i'm the first to your new thread.
perfect ... great
Inviato dal mio SM-N960F utilizzando Tapatalk
syazwanaizad said:
I'm gonna try it now but may i know whether is this rom de-bloated? Looks like i'm the first to your new thread.
Click to expand...
Click to collapse
Everything you need to know about this ROM you can find in my main thread, linked in post #1 (including v6.0 changelog).
By default it is debloated very slightly - only social and Microsoft apps have been removed (plus some critical and/or not working knox related stuff)
Great to see! Kudos
_alexndr said:
Everything you need to know about this ROM you can find in my main thread, linked in post #1 (including v6.0 changelog).
By default it is debloated very slightly - only social and Microsoft apps have been removed (plus some critical and/or not working knox related stuff)
Click to expand...
Click to collapse
You're a great man already.
This means that call recording
is available on this ROM?
aljaadi said:
You're a great man already.
This means that call recording
is available on this ROM?
Click to expand...
Click to collapse
YES
_alexndr said:
YES
Click to expand...
Click to collapse
:good:
Hi guys, thanks to Alexandr first of all! Why doesn't work intellingerlt, fingerprint and iris scan? Only pin works as lockscreen. What have I done wrong?
Aldo my sd card is not see by the os.
Thank you
The microSD card isn't detected in this, i clean installed and was running your V5.9 oreo before. It can read it in recovery, and when i take it out and put in my laptop, but doenst get detected in the OS V6 (Pie).
Any ideas?
---------- Post added at 05:49 PM ---------- Previous post was at 05:48 PM ----------
Also, this has "T Roaming, KT service provider" and other CSC things that aren't from my ROM.
Also as the above person said, face recognition, intelligent scan and Iris scan does not work.
Thanks
external SD doesn't work please help
tonisauffa said:
Hi guys, thanks to Alexandr first of all! Why doesn't work intellingerlt, fingerprint and iris scan? Only pin works as lockscreen. What have I done wrong?
Aldo my sd card is not see by the os.
Thank you
Click to expand...
Click to collapse
pcxnet said:
The microSD card isn't detected in this, i clean installed and was running your V5.9 oreo before. It can read it in recovery, and when i take it out and put in my laptop, but doenst get detected in the OS V6 (Pie).
Any ideas?
---------- Post added at 05:49 PM ---------- Previous post was at 05:48 PM ----------
Also, this has "T Roaming, KT service provider" and other CSC things that aren't from my ROM.
Also as the above person said, face recognition, intelligent scan and Iris scan does not work.
Thanks
Click to expand...
Click to collapse
Ashes Remain said:
external SD doesn't work please help
Click to expand...
Click to collapse
For external SD card - after clean install you need to tap on the SD Card in notification panel ("Configure") and then select "Mobile Storage"
For other issues - please post here /data/devbase_install.log file - I need to check if it is an installation failure or maybe something else
_alexndr said:
For external SD card - after clean install you need to tap on the SD Card in notification panel ("Configure") and then select "Mobile Storage"
For other issues - please post here /data/devbase_install.log file - I need to check if it is an installation failure or maybe something else
Click to expand...
Click to collapse
Hi, i got the message about that when i first installed, but it said it wanted to format it, so I didn't do it. Now i dont get any message about the SD. I've removed and reinsterted and nothing..
How can I use the card without wiping everything...
_alexndr said:
For external SD card - after clean install you need to tap on the SD Card in notification panel ("Configure") and then select "Mobile Storage"
For other issues - please post here /data/devbase_install.log file - I need to check if it is an installation failure or maybe something else
Click to expand...
Click to collapse
that is the file
but I clicked on the messege and it said there was an issue and even attempted formatting but still not detected
_alexndr said:
For external SD card - after clean install you need to tap on the SD Card in notification panel ("Configure") and then select "Mobile Storage"
For other issues - please post here /data/devbase_install.log file - I need to check if it is an installation failure or maybe something else
Click to expand...
Click to collapse
I've put into the smartphone a new sd card.......I tapped the notification and then I've formatted it but no sd card is detected!
Thanks for your hard work and I'm sure for those who doesn't care about stability will be happy to this
For me.. I won't use it.. and I will stay with OREO until Samsung releases the official stable PIE and once Samsung releases it... I will wait even more for your PIE stable release before jumping to PIE wagon
I always prefer clean & stable rom and then I customize it by my liking I even get files from alexega © Project Note9 at 4pda Russian forums... and I make different kinds of combinations... it is like remix ROM
Thank you!
@tonisauffa, @pcxnet, @Ashes Remain (and maybe other people who experienced issues)
I think I found a potential reason of problems
Please re-download the ROM from the link below, and please let me know if it solves issues:
>> N960FXXU2ZRL6_DevBase_v6.0.test1.zip << (updated Dec-17)
Click to expand...
Click to collapse
It would be great if you could perform clean install again. Please post here /data/devbase_install.log file again in case of any problem
BTW. Interesting thing is that DL counter exceeded 100 and only 3 persons reported issues. Is there a person for whom ROM is working without mentioned issues? (I mean initial version)
_alexndr said:
@tonisauffa, @pcxnet, @Ashes Remain (and maybe other people who experienced issues)
I think I found a potential reason of problems
It would be great if you could perform clean install again. Please post here /data/devbase_install.log file again in case of any problem
BTW. Interesting thing is that DL counter exceeded 100 and only 3 persons reported issues. Is there a person for whom ROM is working without mentioned issues? (I mean initial version)
Click to expand...
Click to collapse
I downloaded early morning (local time here) but didn't have time to install, so I didn't have any chance to encounter the issue.
Just flashed dirty over ver.5.9 without any issues.
Everything runs smoothly.
_alexndr said:
@tonisauffa, @pcxnet, @Ashes Remain (and maybe other people who experienced issues)
I think I found a potential reason of problems
Please re-download the ROM from the link below, and please let me know if it solves issues:
It would be great if you could perform clean install again. Please post here /data/devbase_install.log file again in case of any problem
BTW. Interesting thing is that DL counter exceeded 100 and only 3 persons reported issues. Is there a person for whom ROM is working without mentioned issues? (I mean initial version)
Click to expand...
Click to collapse
Thank you!
Now all works fine!
Ok sd card.....ok fingerprint and intelligent scanner!
Inviato dal mio SM-A520F utilizzando Tapatalk
All these tweaks working without issues only in firmware FRD-Lx9C432B562
Extra features
- Advanced restart menu (restart modes)
- App twin (many apps for cloning)
- Call Recorder (stock function in Call settings)
- Face unlock (stock function in Security & privacy)
- Gestures (stock function in System navigation)
- Sound Mod (In headphones sound is loud now)
After all restart the phone.
Download Link #1
Download Link #2
Download Link #3
Call recorder and Face unlock are NOT working. I followed instructions and i'm on the right firmware. Any help?
---------- Post added at 06:44 PM ---------- Previous post was at 05:52 PM ----------
I found that using SolidExplorer and EsFile manager the changes i make are reverted after a reboot. I'll explain myself. In particular when trying to copy lib64 folder content into my system/lib64 i fail with Solid (gives me an error) but succeded with ES. But when trying to copy face unlock content and call recording app afrer a restart they revert back as i never copied them. I'm using magisk as root option. Idk what i'm doing wrong
Giuskiller said:
Call recorder and Face unlock are NOT working. I followed instructions and i'm on the right firmware. Any help?
---------- Post added at 06:44 PM ---------- Previous post was at 05:52 PM ----------
I found that using SolidExplorer and EsFile manager the changes i make are reverted after a reboot. I'll explain myself. In particular when trying to copy lib64 folder content into my system/lib64 i fail with Solid (gives me an error) but succeded with ES. But when trying to copy face unlock content and call recording app afrer a restart they revert back as i never copied them. I'm using magisk as root option. Idk what i'm doing wrong
Click to expand...
Click to collapse
All working very good on B562 firmware if root is correct and file manager doing all processes right.
I'm using Magisk 18.1 with Magisk manager 7.0.
File manager is X-Plore.
I gon an error when i try to enroll a face: your facial featrures cannot be found, if i try to start rolling process from begining again camera freezes.
kinkat1995 said:
I gon an error when i try to enroll a face: your facial featrures cannot be found, if i try to start rolling process from begining again camera freezes.
Click to expand...
Click to collapse
On my phone all works very well
haykweb said:
All working very good on B562 firmware if root is correct and file manager doing all processes right.
I'm using Magisk 18.1 with Magisk manager 7.0.
File manager is X-Plore.
Click to expand...
Click to collapse
Ok, so i tried with X-Plore but i found a weird thing...
1) Face unlock doesn't work AT ALL for me (B562)
2) Call recording shows up in setting only if i soft reboot. If i reboot normally it reverts back (auto deletes apk in /system/app i guess)
Idk what to do. It sounds weird
Giuskiller said:
Ok, so i tried with X-Plore but i found a weird thing...
1) Face unlock doesn't work AT ALL for me (B562)
2) Call recording shows up in setting only if i soft reboot. If i reboot normally it reverts back (auto deletes apk in /system/app i guess)
Idk what to do. It sounds weird
Click to expand...
Click to collapse
Hello,
For 1), I tried on my Honor 8 AL00 (B540) and sadly face unlock doesn't detect my face... (the "call recording" feature seems already present in chinese firmwares so I didn't installed it.)
For 2), If you have installed "SafetyPatch" Magisk's module, that's the reason of your issue.
On my phone, "Advanced restart menu" => Bootloop.... so it's better to backup the original file first AND have a working custom recovery like TWRP!
Micdu70 said:
Hello,
For 1), I tried on my Honor 8 AL00 (B540) and sadly face unlock doesn't detect my face... (the "call recording" feature seems already present in chinese firmwares so I didn't installed it.)
For 2), If you have installed "SafetyPatch" Magisk's module, that's the reason of your issue.
On my phone, "Advanced restart menu" => Bootloop.... so it's better to backup the original file first AND have a working custom recovery like TWRP!
Click to expand...
Click to collapse
Advanced menu works for me and no, i haven't installed SafetyPatch but my Safetinet is enforced...modifying it into permissive could fix my issues? What do you think?
Giuskiller said:
Advanced menu works for me and no, i haven't installed SafetyPatch but my Safetinet is enforced...modifying it into permissive could fix my issues? What do you think?
Click to expand...
Click to collapse
I'm curious about how this advanced menu looks like, can you upload a screenshot?
I really don't know... Should be a specific Magisk's module that causes it...
Micdu70 said:
I'm curious about how this advanced menu looks like, can you upload a screenshot?
I really don't know... Should be a specific Magisk's module that causes it...
Click to expand...
Click to collapse
I really wished to make them work...Strange. However, here is the screenshot
All tweaks working very good.
FRD-L09C432B562
haykweb said:
All tweaks working very good.
FRD-L09C432B562
Click to expand...
Click to collapse
I have no doubt that they're working, i've also made some of them to work, i've only problems with face unlock and call recording and idk why, because gestures and advanced menu are working normally as they should. However thanks for sharing...If you have any ideas let me know, i will try and report back
Ok, i've got it! I made everything to work. That's how i did it:
Face Unlock
I've followed your instruction for what regards "system" folder. What i made different was to copy the lines that you copied in product/etc/prop/local.prop there, BUT also in hw_oem/prop/local.prop. I've also copied facerecognize and hw_motion_config.xml into hw_oem/xml. Could be stupid but that worked!
Call Recording
That was easier. What i did was to copy the entire folder into system/priv-app instead system/app. That way i've got it to work.
Thanks for sharing, face unlock is almost useless because you have to turn screen on (yeah we don't have s9 and iris scanner lol) but it's cool anyway!
Giuskiller said:
Ok, i've got it! I made everything to work. That's how i did it:
Face Unlock
I've followed your instruction for what regards "system" folder. What i made different was to copy the lines that you copied in product/etc/prop/local.prop there, BUT also in hw_oem/prop/local.prop. I've also copied facerecognize and hw_motion_config.xml into hw_oem/xml. Could be stupid but that worked!
Call Recording
That was easier. What i did was to copy the entire folder into system/priv-app instead system/app. That way i've got it to work.
Thanks for sharing, face unlock is almost useless because you have to turn screen on (yeah we don't have s9 and iris scanner lol) but it's cool anyway!
Click to expand...
Click to collapse
Very interesting .
If firmwares are the same mine and yours,but i copyed all like in instruction and working very good
haykweb said:
Very interesting .
If firmwares is the same mine and yours,but i copyed all like in instruction and working very good
Click to expand...
Click to collapse
Ahaha idk what to say but at least it worked that way. The only thing i can tell you is that i'm on FRD-L09 version. However, i've got some screenshots
Giuskiller said:
Ahaha idk what to say but at least it worked that way. The only thing i can tell you is that i'm on FRD-L09 version. However, i've got some screenshots
Click to expand...
Click to collapse
Mine is L09 too
download Link not working for me
Download link (MEGA) => https://mega.nz/#!3UE1hIIR!vvP1CcoHern-06pQxyCYPswQKkxNIxUGH5A8GF4s3wc
Not working
Hi there,
I really want to have advanced restart menu. I did like the Instruction told me, but nothing happens. Do I have to change something else?
Edit:
Works like it should somehow. Sorry for that.
kinkat1995 said:
I gon an error when i try to enroll a face: your facial featrures cannot be found, if i try to start rolling process from begining again camera freezes.
Click to expand...
Click to collapse
I do a full reinstall from erecovery and followed the guide and faceunlock works now