I installed the Criskelo v38 2.3.6 Rom and when I install Titanium Backup from market and open it, it force closes. I have tried flashing it again after full data,dalvik,cache wip yet no solution. Can someone please help me, it is very annoying that I can't restore my apps!
you should post that in the forum of your ROM
Don't know if its solved, but if its not, just delete the .odex file in data/app
Sent from my GT-I9100 using xda app-developers app
I found a solution. I had to wipe my sc card too then perform a clean flash. Problem solved. Thanks
A message from a Beast - It's name is Galaxy S2 I9100!
I have this message when i remove an app; "android.process.acore has stopped". its just when i remove an app. i use .587 "stock" ics on my mini pro.
i dont want to reinstall the rom, cause i build a custom nxt rom (to .587)
1. what is android.process.acore
2. is problem with system or sd card?
3 if in the system, where is android.process.acore?
4 can it be caused by wrong wr-r-r permissions in the system?
if somebody has similar problem (android.process.acore has stopped..), pls tell me, what can i do, or how did he solve the problem.
it not a big problem, but annoying, and i dont want to release a rom with any bug.
Ghabryyl said:
I have this message when i remove an app; "android.process.acore has stopped". its just when i remove an app. i use .587 "stock" ics on my mini pro.
i dont want to reinstall the rom, cause i build a custom nxt rom (to .587)
1. what is android.process.acore
2. is problem with system or sd card?
3 if in the system, where is android.process.acore?
4 can it be caused by wrong wr-r-r permissions in the system?
if somebody has similar problem (android.process.acore has stopped..), pls tell me, what can i do, or how did he solve the problem.
it not a big problem, but annoying, and i dont want to release a rom with any bug.
Click to expand...
Click to collapse
I think this must be the problem with phonebook.apk. Please replace phonebook.apk with this - http://www.4shared.com/android/xpxUVS6P/Phonebook.html
Sources - http://forum.xda-developers.com/showpost.php?p=32538104&postcount=282
abcdjdj said:
I think this must be the problem with phonebook.apk. Please replace phonebook.apk with this - http://www.4shared.com/android/xpxUVS6P/Phonebook.html
Sources - http://forum.xda-developers.com/showpost.php?p=32538104&postcount=282
Click to expand...
Click to collapse
thanks, the problem was this.
thank u
Same problem with my device. i got that notif after i change my ROM into HyperbeamCream ROM
i'll try ur trick to fix it...
thank u..
hello,
I'm using room xxlsj omega v.17. I've tried other roms and I'm having the same problem over and over.
Every time I try to open Google plus settings to select to only upload while charging it crashes.
Does anyone knows how to fix it?
thanks in advance.
gilsan said:
hello,
I'm using room xxlsj omega v.17. I've tried other roms and I'm having the same problem over and over.
Every time I try to open Google plus settings to select to only upload while charging it crashes.
Does anyone knows how to fix it?
thanks in advance.
Click to expand...
Click to collapse
I had similar issues do a full wipe and reinstall your rom and backed up apps
GT-I9100 powered by
NeatRom Lite 4.0
SiyahKernel 6.0b4
Try fix permisions and wipe cache with dalvik cache...
Happy new year
Paulius
Thanks for the fast replies!
I had no luck. Keeps crashing. I tried both ways.
I got the crash report that says:
exception class name
java.lang.IllegalArgumentException
source file
LoadedApk.java
Source class
android.app.LoadedApk
Source method
forgetReceiverDispatcher
line number
654
Does the crash log gives any light?
Thx again.
I reinstalled the xxlsj leaked kernel and google+ worked normally, I then flashed omega rom and it stopped working, I did a nandroid rollback and installed eternity rom same problem with the same files.
Does anyone knows how to solve this problem?
Thanks in advance.
Maybe problem with your rom ?
Sorry I didn't see your post. Just reflash rom I think when you flash it corrupted files...
Happy new year
Paulius
I think it is the problem of the rom you flash, perhaps you better check with the creator of that rom.
Fixed/Solved
I found a way to fix the problem. I just used GS2ROMWIPE, http://forum.xda-developers.com/showthread.php?t=2100558, to clean left over junk from previous instalations and now google+ works normally.
Thanks a lot for the help.
:good::good:
Q&A for [Audio Mod] eXtremeBeats™ Any Device
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
This mod work very well but i have little problem with version 2.0. I have lg l9 ii with stock 4.1.2 jb on it, version 1.0 work with viper4android and it sound great but when i installed version 2.0 on clean rom (ofc still 4.1.2 jb) system run good without any issues or fcs but after installing viper i cant run it...! I dont know why but viper cant just run, it is in app drawer but when i click it make screen black for 3 sec and come back to app drawer wiothout any screens or something, he should ask about su permissions and install drivers but this not happen. Ofc super su and busy box are installed and work good, dont know why it happen, i tried install viper later extreme and first extreme later viper in both ways still same problem. I come back to 1.0 because viper for me is a must, maybe you people know how to fix it. Installing viper as system app dont change anything, i tried to add viper drivers on my own by copying its file from old system to lib folder and adding necessary lines in audio_effect.conf but app still cant run
I have installed ver 1.0 on my sgs 3. I am running CM 11 on KitKat 4.4.4 . I use Nova Launcher. I do not see the icon to run the EBS program. I looked in the appp drawer for it with no luck. I do see the build prop entries in my buildprop. Poweramp loads and runs fine. Can any one assist me? BTW, I did try to install ver 2 and ver 2 update. Separately of course. The fc behavior reported by others happened to me. I restored backup then installed version 1. Please advise how to locate the icon to use this program. TIA. Gary
IaKnightHawke said:
I have installed ver 1.0 on my sgs 3. I am running CM 11 on KitKat 4.4.4 . I use Nova Launcher. I do not see the icon to run the EBS program. I looked in the appp drawer for it with no luck. I do see the build prop entries in my buildprop. Poweramp loads and runs fine. Can any one assist me? BTW, I did try to install ver 2 and ver 2 update. Separately of course. The fc behavior reported by others happened to me. I restored backup then installed version 1. Please advise how to locate the icon to use this program. TIA. Gary
Click to expand...
Click to collapse
Their is no app to say anything is open. Just trust the buildprop lines.
---------- Post added at 10:59 AM ---------- Previous post was at 10:58 AM ----------
masterganja said:
This mod work very well but i have little problem with version 2.0. I have lg l9 ii with stock 4.1.2 jb on it, version 1.0 work with viper4android and it sound great but when i installed version 2.0 on clean rom (ofc still 4.1.2 jb) system run good without any issues or fcs but after installing viper i cant run it...! I dont know why but viper cant just run, it is in app drawer but when i click it make screen black for 3 sec and come back to app drawer wiothout any screens or something, he should ask about su permissions and install drivers but this not happen. Ofc super su and busy box are installed and work good, dont know why it happen, i tried install viper later extreme and first extreme later viper in both ways still same problem. I come back to 1.0 because viper for me is a must, maybe you people know how to fix it. Installing viper as system app dont change anything, i tried to add viper drivers on my own by copying its file from old system to lib folder and adding necessary lines in audio_effect.conf but app still cant run
Click to expand...
Click to collapse
Sorry, looks like it is incompatible. Keep using 1.0.
Thanks
OK Thanks for the response.
Does it work on miui?
Sent from my HM 1SW
bobinx said:
Does it work on miui?
Sent from my HM 1SW
Click to expand...
Click to collapse
Providing it's Android 4 or up, sure.
Opss, until now I found problem with my phone: even I install busybody 15 or 18, then flash this mod (v2), then I found nothing add into my system/app and system/framework, ... only string was add into my build.prop. I don't know why, but before I installed successful this mod, with full file in this zip into my system, now didn't, even I mount system in recovery before flash zip. My phone is rooted, of course. Anyone like that?
hey guys,
I've installed this mod and I have a question.
Is there any app where I can configurate settings like in viper4android? Or is this mod made of various libs and Service's running in the background without a primary app?
Sony Xperia Z Ultra 4.4.4 Stock not compatible
Flashinh this to my leads my Sony Xperia Z Ultra 4.4.4 Stock to infinite reboots. Device reboots after several seconds of booting into system
Please help me sir,
Im new to this thread. I have galaxy note 2 n7100 and i have installed ditto note 4 rom and having viper4android installed. When i flashed ExtremeBeats audio mod through recovery the phone gets started and when i try to unlock my phone by swiping on lockscreen phone get stuck and then i have to format my phone. Please help me in this situation.
taus3q said:
Please help me sir,
Im new to this thread. I have galaxy note 2 n7100 and i have installed ditto note 4 rom and having viper4android installed. When i flashed ExtremeBeats audio mod through recovery the phone gets started and when i try to unlock my phone by swiping on lockscreen phone get stuck and then i have to format my phone. Please help me in this situation.
Click to expand...
Click to collapse
More specific please... EB version? do you have custom kernel installed or just stock kernel from rom? do you mount /system before flashing EB? The best way to install EB is after flashing the new rom. You need to mount /system then flashing EB. Reboot. After that install v4a and its drivers. Reboot again. If you follow that method and found it's not working try another version of EB. If the problem still persists, seems like it come from your rom side not supporting it.
Hi!
This beats-mod seems very promissing.
I wonder if it will work on my brand new I9301 S3 Neo ???
Because I also need to root it and wonder if it worth?
Please let me know, I love hi-fi music.
Cheers!
Sent from my GT-I9301I using XDA Free mobile app
How much time it take for installing the library?
My rom already as the viper4android... Liquidsmooth 5.0.1 LG G3 how dö i install the mod? Pl help me
iGordy said:
My rom already as the viper4android... Liquidsmooth 5.0.1 LG G3 how dö i install the mod? Pl help me
Click to expand...
Click to collapse
Just flash this in your recovery, and you are done.
Download link
Pls tell where is the download link of zip file
i flashed version 2.1 on my evo 4g lte with TWRP recovery and it flashed fine, but when i rebooted and played music, it stayed the same. Was an app supposed to be installed or something? I have Viper4android installed already, but extremebeats doesnt show up anywhere...are there more steps besides flashing with recovery?
Stock Rom?
I'm new in this kind of topics. Does it work with a Stock Rom?
This mod doesn't work on my HTC One M8. Android 4.4.4 3.28.xxx.x Rooted Stock, S-on. Tried it a bunch of times with different practices, it just soft bricks the phone every time.
OP, what can you say about this? It says in your page that my device is supported but it doesn't work. Or maybe it's just me, what should I do if it is? Help please, I'm really eager to have this mod.
can somebody please tell me if you also dont have note small app installed on your stock lollipop 726 rom? is there any way i can get this app? i have tried installing the rom again...i also dont have it with 690 rom.
fixed! whoever has the same issue just go to http://forum.xda-developers.com/showthread.php?t=2737540 and download the apk and install as normal app