Related
Hello ! how to install Xposed on rooted 6.0.1 M4 Aqua device without Bootlooping ? , i have installed Xposed Framework by TWRP (xposed-v86-sdk23-arm64.zip ) and ive had a bootloop.
I flashed it without problems. First boot took a very long time though.
how much time ? mine was lying down like 20 minutes and nothing happened
PelsonMX said:
how much time ? mine was lying down like 20 minutes and nothing happened
Click to expand...
Click to collapse
Mine took around 25 minutes so be patient
thanks ! all working fine ! thread can be closed
Sorry...only flash in recovery? Dont flash in pc? How?
Enviado desde mi E2303 mediante Tapatalk
you just installing the *.zip file and making a dalvik cache wipe and thats it
Can you put the link to specific archive?. Thanks a lot
Enviado desde mi E2303 mediante Tapatalk
All done. Thanks
Enviado desde mi E2303 mediante Tapatalk
Hi, just received a link to a cm14 build for this phone. Downloaded and flashed it trough twrp, but it doesnt work. Maybe you can help me. I dont know where that build come from. I did wipes (cache,data,dalvik,system and internal storage), then flashed the zip and rebooted. It would load with the bootanimation even with charging led on (almost booted?), but it reboots. I did the same flashing process but flashing 7.0 gapps, and this time, phone would stuck on bootanimation forever. IMPORTANT: TWRP in both cases gave me two errors, you have the screenshot down there.
ar u trying to change twrp? can u share link?
That two commands are not unusual for CM14. Can you provide us source of that link from where you downloaded the ROM.
Sent from my Redmi Note 3 using Tapatalk
Just found the website from the author of the ROM, here you have:
https://sourceforge.net/projects/abhi/files/?source=navbar
Enviado desde mi Redmi Note 3 mediante Tapatalk
no sign for the source download page
Supercharlie25 said:
Just found the website from the author of the ROM, here you have:
https://sourceforge.net/projects/abhi/files/?source=navbar
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
no sign for the source download page
---------- Post added at 05:36 AM ---------- Previous post was at 05:35 AM ----------
ioosis said:
no sign for the source download page
Click to expand...
Click to collapse
try without installing gaps
Hi, I have just tried to flash the ROM. Doesn't boot. If I flash 7.0 GApps, it just shows the CM face, then the ripples appear 3-4 times before hanging and reboots. I wiped dalvik cache and cache after that, bootloop. Flashed back to CM13.
Why u guys r flashing my broken test builds? Keep patience for Sometime. Nought for kenzo is in its way.. Most probably it will released publicly soon
Please stop posting about cm-14.0 and other roms when it is not ready, cm-14 is in staging mode, so be patient
When is the cm 14 ( official nightly) estimated to be released ??
Sent from my Redmi Note 3 using Tapatalk
No deadlines guys, be patient.
Enviado de meu Redmi Note 3 usando Tapatalk
@War_machine28 said:
Why u guys r flashing my broken test builds? Keep patience for Sometime. Nought for kenzo is in its way.. Most probably it will released publicly soon
Click to expand...
Click to collapse
haha, that's because we can't wait! Keep up the good work in delivering CM14 for Kenzo!
Anyone tried this ?
https://androidfilehost.com/?fid=24713784966775139
i tried build 20160909 it booted up but com.android.phone keeps crashing
diamondlol said:
i tried build 20160909 it booted up but com.android.phone keeps crashing
Click to expand...
Click to collapse
Did you do clean install or dirty flash? And any other bug you noticed?
Sent from my Redmi Note 3 using XDA-Developers mobile app
abhimanyu.singh said:
Did you do clean install or dirty flash? And any other bug you noticed?
Sent from my Redmi Note 3 using XDA-Developers mobile app
Click to expand...
Click to collapse
i clean installed without gapps other than that sim doesnt work
diamondlol said:
i clean installed without gapps other than that sim doesnt work
Click to expand...
Click to collapse
may be your efs partition got corrupted.... restore it if you have previously backed up and then check
bravonova said:
may be your efs partition got corrupted.... restore it if you have previously backed up and then check
Click to expand...
Click to collapse
clean installed and then restored efs but nothing changed android.phone still crash now im going back to cm13 because i need the phone
Can somebody publish logcat of cm14 boot failure? I want to discover it.
tank0412 said:
Can somebody publish logcat of cm14 boot failure? I want to discover it.
Click to expand...
Click to collapse
sorry you have to say that I had just returned to cm13
Sent from my Redmi Note 3 using Tapatalk
Code:
include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What works?
Audio
Wifi
Bluetooth-a2dp
Camera (photo and video recording)
RIL
GPS
FM
What doesn't ?
Smartcover
Tap to wake
Live display (works but lags device)
Stuff that I might have not noticed
Changelog
Initial build
Downloads
ROM
Gapps
Build 2 (08-nov-2016)
-Changes on device and vendor- fixed build
-Updated sources
-Fixed bluetooth a2dp
Downloads
ROM:
Speed 7+(ZP952)
Speed 7(ZP951)
Gapps
Last build 3 (21-jan-2017)
-Fix magnetic sensor thanks to @wonia
Downloads
ROM:
Speed 7+(ZP952)
Speed 7(ZP951)
Gapps
Installation
You need to unlock your bootloader and install a custom recovery. An easy solution to do this:
http://forum.xda-developers.com/speed-7-plus/development/script-unlock-bootloader-carliv-t3486336
and then:
Download the ROM
Download GApps package (optional)(arm64-pico recommended)
Put the zip files on your phone
Reboot in Recovery
Wipe Data/System/Cache/Dalvik cache-ART or wipe pre_flash on carliv
Install CM13 zip file
Install GApps zip file (optional)
Reboot system
Go to setting/display & lights/live display and select to OFF (otherwiswe your system becomes laggy)
Credits
Specially to:
@Deepflex for device tree and
@lucky76 for adapt to ulefone metal
And:
@BlueFlame4
M.A.D Team
@bluefirebird
Let me know if I forgot someone!
Please don't mirror the ROM anywhere, thanks!!
XDA:DevDB Information
Cyanogenmod 13, ROM for the Zopo Speed 7 Plus
Contributors
pocaropa
Source Code: https://github.com/pocarropa/android_device_zopo_zp951
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock marshmallow
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-10-24
Last Updated 2017-01-21
reserved
Nice!
Live Display needs kernel changes, see https://github.com/visi0nary/androi...mmit/053310ed91c1759f8ebc5f9a8f567a485b94606c and https://github.com/visi0nary/androi...mmit/ffffdaee6c5d09e6115aa8393993208cda30f8f2
Device needs this then: https://github.com/visi0nary/androi...mmit/eb4537ec21e52f4575d94465558dd78b4b184b59
Good luck!
PS: Do you use MM or L camera blobs?
BlueFlame4 said:
Nice!
Live Display needs kernel changes, see https://github.com/visi0nary/androi...mmit/053310ed91c1759f8ebc5f9a8f567a485b94606c and https://github.com/visi0nary/androi...mmit/ffffdaee6c5d09e6115aa8393993208cda30f8f2
Device needs this then: https://github.com/visi0nary/androi...mmit/eb4537ec21e52f4575d94465558dd78b4b184b59
Good luck!
PS: Do you use MM or L camera blobs?
Click to expand...
Click to collapse
Thanks for the hint!!
The fact I am using MM prebuilt kernel because I don't have source for MM and to be honest, I don't know how to fix build rejects on LL and even less update to MM.[emoji17]
I am using MM blobs from last official stock rom.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Cool, i will give it a try...
installation was fine
found no errors
then i installed super -su for root
and suddenly massive ghost-touches occured on my display
its really horrible....
what should i do?
anersxda said:
installation was fine
found no errors
then i installed super -su for root
and suddenly massive ghost-touches occured on my display
its really horrible....
what should i do?
Click to expand...
Click to collapse
Don't install supersu!
If you want to be root, just go to developer options and allow root access.
Now you should reinstall cm and gapps as per first post.
Enviado desde mi Redmi Note 3 mediante Tapatalk
thanks for the quick reply...
also in the recovery the ghost touches appear,
i think thats not good
will try installing whole new procedure with sp-flash tool and stock rom...
pocaropa said:
Don't install supersu!
If you want to be root, just go to developer options and allow root access.
Now you should reinstall cm and gapps as per first post.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Do you use carliv MM recovery for installation?
In my case, touch does not work in revovery mode
Enviado desde mi Redmi Note 3 mediante Tapatalk
very nice, i'll try that rom.
one Problem: bluetooth speaker are connected but there is no sound...
greets
juelue
no i use twrp 3.0.2 by jemini
so far it worked but now the ghost touches...
still try....
pocaropa said:
Do you use carliv MM recovery for installation?
In my case, touch does not work in revovery mode
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Without haste, it will also be released for Zopo Speed 7 Plus ?
Best Regards...
pikka68 said:
Without haste, it will also be released for Zopo Speed 7 Plus ?
Best Regards...
Click to expand...
Click to collapse
I can do it in a few days if you want to test it
Enviado desde mi Redmi Note 3 mediante Tapatalk
pocaropa said:
I can do it in a few days if you want to test it
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
ok, if you can!
Yes, I will try
Enviado desde mi Redmi Note 3 mediante Tapatalk
@anersxda , can you upload twrp used?
Enviado desde mi Redmi Note 3 mediante Tapatalk
i used this recovery:
http://www.needrom.com/download/twrp_302-android-6/
i could not restore my phone. still massive ghost touch...
restored from backup, restored stock.....everywhere the same....
last option: send it back to zopo
pocaropa said:
@anersxda , can you upload twrp used?
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
pocaropa said:
I can do it in a few days if you want to test it
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
I love you so much, thank you!
anersxda said:
i used this recovery:
http://www.needrom.com/download/twrp_302-android-6/
i could not restore my phone. still massive ghost touch...
restored from backup, restored stock.....everywhere the same....
last option: send it back to zopo
Click to expand...
Click to collapse
Is a known problem on some units of this device; screen flickering.... You can try older versions with spflashtools, some users report "better results".
Enviado desde mi Redmi Note 3 mediante Tapatalk
@pocaropa
Can U provide mini tutorial for Carliv recovery,it's new for me,and thank's for Ur maintence on this tread!
I'm not the developer for this ROM, but I would like to share this clean ROM I have been using.
Link: http://mi-globe.com/index.php/rom-builder/
Select : Mi Note 2
Codename: scorpio
Click Show Expert Settings to customize your ROM.
- I usually select don't overwrite recovery.
Note: Usually you need to flash twice for it to work, sometimes you get an error 7 if you're flashing from a clean wipe, if that's the case you can either:
A. flash again, check to see there is no errors.
B. boot to system and set things up; then reboot back to recovery and flash it again (so that the symbolic links are in place), you might need to root it before flashing it.
Latest Xposed Framework: http://forum.xda-developers.com/xposed/unofficial-xposed-miui-t3367634
Consider getting the xMIUI Module to customize your experience and support SolarWarez.
edmondt said:
I'm not the developer for this ROM, but I would like to share this clean ROM I have been using.
Link: http://mi-globe.com/index.php/rom-builder/
Select : Mi Note 2
Codename: scorpio
Click Show Expert Settings to customize your ROM.
- I usually select don't overwrite recovery.
Note: Usually you need to flash twice for it to work, sometimes you get an error 7 if you're flashing from a clean wipe, if that's the case you can either:
A. flash again, check to see there is no errors.
B. boot to system and set things up; then reboot back to recovery and flash it again (so that the symbolic links are in place), you might need to root it before flashing it.
Latest Xposed Framework: http://forum.xda-developers.com/xposed/unofficial-xposed-miui-t3367634
Consider getting the xMIUI Module to customize your experience and support SolarWarez.
Click to expand...
Click to collapse
Thanks for sharing bro. Does this rom includes Multi-Lang (I´m looking for spanish)?
Regards
jorvacf said:
Thanks for sharing bro. Does this rom includes Multi-Lang (I´m looking for spanish)?
Regards
Click to expand...
Click to collapse
Is based on xiaomi.eu and is the Spanish language.
Enviado desde mi Redmi Note 3 mediante Tapatalk
strumbol said:
Is based on xiaomi.eu and is the Spanish language.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Thank you bro. Have you tried it? It is very stable?
All xiaomi betas are stable for everyday use without problems.
I have used them in my redmi note 3 and when I have the bootloader unlocked in my Mi Note 2 I will also use it.
Enviado desde mi Redmi Note 3 mediante Tapatalk
strumbol said:
All xiaomi betas are stable for everyday use without problems.
I have used them in my redmi note 3 and when I have the bootloader unlocked in my Mi Note 2 I will also use it.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Ok bro, thanks for the answer. About 4 days ago I sent the request to unlock the phone but until now I didn´t receive an answer . My phone has a fake rom I don´t know if this means that is unlocked. Do you know something about this?
Thanks
They are celebrating the Chinese New Year, so be patient ... my cell phone also came with a fake ROM and locked, and I had to change it with My PC Suite, but the Chinese version.
Enviado desde mi Redmi Note 3 mediante Tapatalk
strumbol said:
They are celebrating the Chinese New Year, so be patient ... my cell phone also came with a fake ROM and locked, and I had to change it with My PC Suite, but the Chinese version.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Ok bro, so if I want to install a rom from xiaomi.eu or the one that edmondt shared I still need to unlock the phone right?
Yes, that is.
Enviado desde mi Redmi Note 3 mediante Tapatalk
strumbol said:
Yes, that is.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Thank you bro!
Hi, I have a RMN4 GLOBAL (Snapdragon) 4/64 with a 64 GB microSD Samsung Evo + uhs3, the phone recognizes it perfectly but it does not stop to continuously show the notification to eject it and it's annoying me.
Anyone knows how to deactivate this notification?
I have the last weekly rom of Xiaomi.eu, rooted and with TWRP.
Enviado desde mi Redmi Note 4X mediante Tapatalk
arthyko said:
Hi, I have a RMN4 GLOBAL (Snapdragon) 4/64 with a 64 GB microSD Samsung Evo + uhs3, the phone recognizes it perfectly but it does not stop to continuously show the notification to eject it and it's annoying me.
Anyone knows how to deactivate this notification?
I have the last weekly rom of Xiaomi.eu, rooted and with TWRP.
Enviado desde mi Redmi Note 4X mediante Tapatalk
Click to expand...
Click to collapse
Try ejecting and remounting it. (Never faced this problem tho )
MyNameIsRage said:
Try ejecting and remounting it. (Never faced this problem tho )
Click to expand...
Click to collapse
Thanks Bro but doesn't work
Enviado desde mi Redmi Note 4X mediante Tapatalk
If you have rooted with magisk or supersu, try 'notificationsOff' app from playstore
solomonR15 said:
If you have rooted with magisk or supersu, try 'notificationsOff' app from playstore
Click to expand...
Click to collapse
Thanks, I've rooted with Supersu but still appearing that message.
Enviado desde mi Redmi Note 4X mediante Tapatalk
arthyko said:
Thanks, I've rooted with Supersu but still appearing that message.
Enviado desde mi Redmi Note 4X mediante Tapatalk
Click to expand...
Click to collapse
do you try to reformat SD card ? If not you can try it, but before that make sure you make a backup for all of your data on sd card to PC or USB drive.
arthyko said:
Hi, I have a RMN4 GLOBAL (Snapdragon) 4/64 with a 64 GB microSD Samsung Evo + uhs3, the phone recognizes it perfectly but it does not stop to continuously show the notification to eject it and it's annoying me.
Anyone knows how to deactivate this notification?
I have the last weekly rom of Xiaomi.eu, rooted and with TWRP.
Enviado desde mi Redmi Note 4X mediante Tapatalk
Click to expand...
Click to collapse
It is a miui rom issue. I have it on sone of the roms and not on others. I have a 128gb version of the same card as you. Formatting will not fix the problem so dont waste your time.