Hi,
Recently I have tried various CM based custom ROM (AEX, RR and, Lineage OS). In all the ROM's the recorded fingerprint doesn't work well.
1. It doesn't response in a large number of times.
2. After rebooting there is no fingerprint record. I have to record as new fingerprint after every reboot.
Any solutions to the above those?
Some other issues:
3. After flashing official TWRP it gets stuck at Mi logo. ZCX TWRP is fine.
4. After flashing Nitrogen OS it says decrypt the device and doesn't get boot up after successful flashing.
any solutions?
Thanks in advance.
Related
My previous thread is
http://forum.xda-developers.com/redmi-note-3/help/help-phone-reboot-5-10-kenzo-t3376650/
That's why I use CM based ROM
I had follow the instruction from : here
but I got stuck in mi logo
and the other problem is, when I flash the ROM it can't enter to TWRP recovery
to able to enter TWRP it needs to be re-unlocked and go back to MIUI via MiFlash and re-flash TWRP again
I tried to re-unlock and flash TWRP only without go back to MIUI (the process was succesful, but it can't booted up to TWRP)
The problem exist in CM13 based with fingerprint compatible
- Santhos build after fingerprint compatible
- Mokee ROM
- CM13 flour mo build
The only ROM I can't use are CM12.1 or CM13 with fingerprint uncompatible (without bootloader being relocked)
but unlike this version because the battery drain is very fast (Android OS, and system used more battery than SOT)
I can't use MIUI and AOSP because random reboot issue that I have mentioned in my first thread
Anyone please help, this phone is driving me crazy :crying:
Did you try a reflash of miui in EDL mode?
A month ago I tried installing Android 9.0 ROM and i got reboot loop after I did the phone setup. I tried different ROMs and everything had the same problem. Even twrp will also stop showing any files in the device and I need to change the file system and revert it back again then mount my phone to desktop and transfer the ROM. I was told that it was because of me not installing MIUI 10 before trying it. So today I installed MIUI 10 and tried installing lineage 16.0 and got the same problem. Phone starts going into reboot And recovery does not show any files!
Please help me from this hell! I'm hating this MIUI.
mynameisvineeth said:
A month ago I tried installing Android 9.0 ROM and i got reboot loop after I did the phone setup. I tried different ROMs and everything had the same problem. Even twrp will also stop showing any files in the device and I need to change the file system and revert it back again then mount my phone to desktop and transfer the ROM. I was told that it was because of me not installing MIUI 10 before trying it. So today I installed MIUI 10 and tried installing lineage 16.0 and got the same problem. Phone starts going into reboot And recovery does not show any files!
Please help me from this hell! I'm hating this MIUI.
Click to expand...
Click to collapse
First of all I have to assume that you are sure that you have Redmi 5 plus (Vince) and not Redmi Note 5 Pro (Whyred), if this is the case let´s go to the next.
Any Miui rom encrypts data by default at least from oreo so no way to avoid this, if you flash a Miui rom then your data wont´be accesible and the next rom to be flashed you have to sideload it via adb (there are other ways).
I think you missed something here, if you flash a mui rom and over it a pie rom then there´s no way that your device reboots to system. You only have to flash firmware 8.1 from miui not the whole rom.
Start this from the scratch; I recommend OrangeFox recovery instead of TWRP so it has more features https://forum.xda-developers.com/re.../official-orangefox-recovery-project-t3807479
- Before to flash nothing In orangeFox recovery enable the options DM-verity and disable force encryption, you will find too options to keep OTA and others, check which you want.
- Flash the firmware miui 8.1 https://androidfilehost.com/?fid=11410963190603850663
- Flash the pie rom for vince (may not apply for a GSI pie)
- Flash the Gapps (if needed)
it´s all.
Just a tip; be careful with changing system of files at any time so if the process is cutted/interrupted for some reason your device could be seriously damaged.
it does. you just need to flash firmware file first.
i have downloaded mi a3 stock rom from mi website. after successful flashing, my phone is bootlooping at android one logo. hence i again installed twrp and flashed latest havoc os, now my fingerprint sensor is not working. what can i do?
Redmi Note 9S Curtana / 6GB / 128GB
Currently, I have this version of TWRP installed:
https://sourceforge.net/projects/lrtwrp-curtana/files/recovery-redmi_note9s-3.4.1-10.0-b5.img
Havoc-OS-3.7
https://sourceforge.net/projects/ha...c-OS-v3.7-20200725-curtana-Official-GApps.zip
I would really like to get RR rom on this device. I downloaded this version:
https://get.resurrectionremix.com/?dir=ten/curtana
It boots fine, LTE and WiFi work fine without gapps, but once I boot back into TWRP, and install opengapp, it tries to boot into RR ... reboots again from the RR boot screen, and then boots straight into TWRP.
This is the Gapp I downloaded, which I think is the correct version.
open_gapps-arm64-10.0-nano-20200918.zip
Unless there a Curtana RR version that has Gapps baked in, I'd appreciate anyone with some ideas. Thanks.
No news regarding this topic?
About 3 weeks ago I ran into the very same problem trying to get RR to work together with GApps and couldn't get it going either.
I tried switching to lineage today and it worked at first. Now, after trying to flash gapps my phone is on a bootloop. It doesn't boot to any recovery even after I flashed multiple recoveries (TWRP and Lineage OS). I dont know what to do so if someone could tell me a way out of this I would appreciate it. Thank you