Redmi Note 9S Curtana / 6GB / 128GB
Currently, I have this version of TWRP installed:
https://sourceforge.net/projects/lrtwrp-curtana/files/recovery-redmi_note9s-3.4.1-10.0-b5.img
Havoc-OS-3.7
https://sourceforge.net/projects/ha...c-OS-v3.7-20200725-curtana-Official-GApps.zip
I would really like to get RR rom on this device. I downloaded this version:
https://get.resurrectionremix.com/?dir=ten/curtana
It boots fine, LTE and WiFi work fine without gapps, but once I boot back into TWRP, and install opengapp, it tries to boot into RR ... reboots again from the RR boot screen, and then boots straight into TWRP.
This is the Gapp I downloaded, which I think is the correct version.
open_gapps-arm64-10.0-nano-20200918.zip
Unless there a Curtana RR version that has Gapps baked in, I'd appreciate anyone with some ideas. Thanks.
No news regarding this topic?
About 3 weeks ago I ran into the very same problem trying to get RR to work together with GApps and couldn't get it going either.
Related
Hi. Im very New to redmi note 3 Pro (kenzo).
I bought it yesterday and i install lineageOS today.
I use edl (because i didnt want to wait for xiaomi code to unlock bootloader)
I follow all the steps except letting miui stock rom to finish first boot (because it wont boot after 11 minutes so i think it was a bootloop).
Instead i rebooted the phone and i enter alter twrp. There i flash lineageOS 14.1, then gapps and finally supersu 2.79
Then boot to system and let twrp to overwrite stock recovery.
Then, lineageOS booted well. No problems except it didnt read my sim card.
I flashed cm14 firmware zip (with twrp) then rebooted to system.
Now it reads sim card, i have ímei, and i have the apn of mobile company.
But i have no signal. I have "no service" and no signal bars.
thanks for all the repplies (irony).
i get my own answer: i was flashing kenzo roms while i have a kate phone. after flashing kate rom i get my signal back
I had downloaded latest version of lineage OS from official website and I tried to flash on my REDMI Note 3 Kenzo but I can't here is the screenshot attached of remark.
Pls help
I was just about to post about this. I have the same issue, a work around I found was described in this video: https://www.youtube.com/watch?v=bGVOR0kugZw
However, now that I have it installed, and try to OTA update, I get the same, I have to repeat the steps in the video every time I update, kinda frustrating and unnecessary imho. I had the latest MIUI updated and unlocked with the miui unlocker before the wiping and installing. All I have found its related to the bootloader not supporting android N.
Look at the error and you will see the issue.
Your firmware is too old.
Download one from Lineage thread and flash that before Lineage
update, I installed the firmware from this thread: https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361
now update goes thru like its supposed to
every recovery i flash gives me ERROR 7 :/
i have a 'kate' and befor i used to flash roms without issue. kenzo roms and flash kate modem done.
but phone crashed some months ago so i changed but now i want it again. and now im back on did a edl flash miui beta unlocked bootloader flashed twrp (all the twrp possible btw i tried all i could find) they all dont want to flash a custom rom i tried 7 different ZIP of custom roms... i tried to flash 4 diffeeent versions of RR 5.7.4 and 1 RR 5.8.4 all give error 7. flash kate modem. still error, then flashed modem with emmc thing patched nope still wont flash any custom rom
does anybody know how to fix this
You have to erase dalvik cache and DATA it will bring you new setup but still your device would be updated....
Hi,
Recently I have tried various CM based custom ROM (AEX, RR and, Lineage OS). In all the ROM's the recorded fingerprint doesn't work well.
1. It doesn't response in a large number of times.
2. After rebooting there is no fingerprint record. I have to record as new fingerprint after every reboot.
Any solutions to the above those?
Some other issues:
3. After flashing official TWRP it gets stuck at Mi logo. ZCX TWRP is fine.
4. After flashing Nitrogen OS it says decrypt the device and doesn't get boot up after successful flashing.
any solutions?
Thanks in advance.
"E1001: failed to update system image. Updater process ended with error 7" on Mido
I need your help guys.
I kept on getting this error saying "E1001: failed to update system image.
Updater process ended with error 7" everytime I flash roms on my Redmi note 4x SD variant Mido. No matter what the rom I flash and recovery I use results were all the same.
I already edited the roms that I have, I removed all the asserts scripts from the updater script but it was still the same.
I have been flashing roms before but I am not completely familiar with this error and on how to fix it.
I hope you guys can help me.
rabe0334 said:
I need your help guys.
I kept on getting this error saying "E1001: failed to update system image.
Updater process ended with error 7" everytime I flash roms on my Redmi note 4x SD variant Mido. No matter what the rom I flash and recovery I use results were all the same.
I already edited the roms that I have, I removed all the asserts scripts from the updater script but it was still the same.
I have been flashing roms before but I am not completely familiar with this error and on how to fix it.
I hope you guys can help me.
Click to expand...
Click to collapse
Which ROMs are you trying to flash?
Which TWRP (recovery) are you using?
Noter2017 said:
Which ROMs are you trying to flash?
Which TWRP (recovery) are you using?
Click to expand...
Click to collapse
Attempted to flash:
Corvus 5 Q mido
Corvus 7.5 Q mido
Corvus 8.5 Q mido
Syberia OS 3.9 Q mido
Resurrection Remix Q 8.6.2 mido
MIUI 12 Razer mido
MIUI 11 stock global recovery rom
Colt OS Q latest ver mido
AbhiXROG Edition 20.9.24
Recoveries that I've used:
TWRP 3.3.1
Orange Fox r11
Pitchblack Recovery 3.0.0 (twrp 3.4.0 based)
Firmware:
MIUI 11 Global stable
They've failed me, and my phone is dead until now.
I also tried to flash fastboot global miui rom, so what I did is I boot my phone to EDL then used miflash the latest one to flash the rom into my phone. Flash attempts were all successful, but my phone kept on being stuck on Mi Logo. I can no longer think of other options.
rabe0334 said:
Attempted to flash:
Corvus 5 Q mido
Corvus 7.5 Q mido
Corvus 8.5 Q mido
Syberia OS 3.9 Q mido
Resurrection Remix Q 8.6.2 mido
MIUI 12 Razer mido
MIUI 11 stock global recovery rom
Colt OS Q latest ver mido
AbhiXROG Edition 20.9.24
Recoveries that I've used:
TWRP 3.3.1
Orange Fox r11
Pitchblack Recovery 3.0.0 (twrp 3.4.0 based)
Firmware:
MIUI 11 Global stable
They've failed me, and my phone is dead until now.
I also tried to flash fastboot global miui rom, so what I did is I boot my phone to EDL then used miflash the latest one to flash the rom into my phone. Flash attempts were all successful, but my phone kept on being stuck on Mi Logo. I can no longer think of other options.
Click to expand...
Click to collapse
Hey, I faced the same issue today.
I'm not sure what I did wrong, but I think I wiped my data incorrectly or something.
I tried many things but it wouldn't work.
Here is how I resolved it.
1. Installed Orange Fox Recovery (Maybe not necessary, but that's what I did)
2. Format Data. (Not Wipe, Format)
3. Flashed ROM again.
Voila, it flashed.
Hope it helps.
Thanks for your response. I'll make sure to do the same procedure. I hope it can fix everything.
I tried switching to lineage today and it worked at first. Now, after trying to flash gapps my phone is on a bootloop. It doesn't boot to any recovery even after I flashed multiple recoveries (TWRP and Lineage OS). I dont know what to do so if someone could tell me a way out of this I would appreciate it. Thank you