{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Guide to Flash Stock ROM on Galaxy J7 2017
Instructions
Make Sure You Have a Working PC and Original Data Cable
First of All Install Samsung USB Drivers (Download Links are Given Below)
Download J730F Firmware
Extract (unzip) the firmware file
Download Odin v3.12.7
Extract Odin ZIP file
Open Odin v3.12.7
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Downloads
Samsung Universal USB Driver
Here
J730F Firmware
Here
Odin v3.12.7
Here
Credits
Samsung
Google
XDA
NOTE
This Firmware Country is UAE
I will add more firmware links soon...
Hi man did this firmware fix s health and knox??? Please answer I don't have root but my s health and knox is hacked?
aliraad said:
Hi man did this firmware fix s health and knox??? Please answer I don't have root but my s health and knox is hacked?
Click to expand...
Click to collapse
Dont think there's any way to reset knox at the moment my friend
Does this get warranty back from installing Customs ROMs?
I need INDIAN firmware for j730F pls.... 32gb variant
Problem while flash
While i try to flash it it says security check errorit
Any suggestions?
just get it from updato.com
PLease i need help i flashed twrp through odin and now it is stuck on the bootloop i tried factory reset everything but nothing works please anyone help me i would appreciate it alot! on the back of the cover the model is SM- J730F but when i connect it to the pc it shows me SM-J730GM. PLEASE HELP!!
KingFunky said:
PLease i need help i flashed twrp through odin and now it is stuck on the bootloop i tried factory reset everything but nothing works please anyone help me i would appreciate it alot! on the back of the cover the model is SM- J730F but when i connect it to the pc it shows me SM-J730GM. PLEASE HELP!!
Click to expand...
Click to collapse
Flash the original rom and everything will be fine.
And with the twrp you need to be very carefully at th instructions.
What am I doing wrong?
I have clean nouga
Failure here!!
the firmware didn't work for me, Odin kept giving the error: Complete(write) operation failed. I tried several versions of Odin, tried to remove the sdCard and SIM, tried to change the cable and usb port, nothing worked.
Downloaded the firmware from SamMobile and it worked like a charm.
xN00Bx said:
Guide to Flash Stock ROM on Galaxy J7 2017
Instructions
Make Sure You Have a Working PC and Original Data Cable
First of All Install Samsung USB Drivers (Download Links are Given Below)
Download J730F Firmware
Extract (unzip) the firmware file
Download Odin v3.12.7
Extract Odin ZIP file
Open Odin v3.12.7
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Downloads
Samsung Universal USB Driver
Here
J730F Firmware
Here
Odin v3.12.7
Here
Credits
Samsung
Google
XDA
NOTE
This Firmware Country is UAE
I will add more firmware links soon...
Click to expand...
Click to collapse
samsung j7 pro (j730f/ds) Baseband unknown and Imei blank...
flash with lettest file but same problem (J730FXXU2ARB1)
how to repair baseband and imei please help me.
Hy
This rom, good/working for J730F Dual sim?
Thx
Please download the proper firmware in sammobile.com don't rely on this firmware. Choose the rom based on your country to avoid getting those unknown imei errors etc.
---------- Post added at 06:25 AM ---------- Previous post was at 06:19 AM ----------
kokopo said:
Hy
This rom, good/working for J730F Dual sim?
Thx
Click to expand...
Click to collapse
Same is true with this one. Go to the website that I mentioned under firmware search j730x (change x depending on the letter of your original/stock rom) just enter it choose your country sometimes it comes also with the specific carrier for the phone then download the rom. As I have said don't rely on the uploaded rom here cause it might it to certain issues about your network. BTW you need an account before downloading those firmware but its worth it.
Where can i check which is the correct firmware for my phone. Baltic or nordic countries? I'm from finland.
What's the logic behind posting official firmware links on xda? All of them are on websites like sammobile, along with proper instructions.
Anyone have a clear cut way to restore a hacked account? I've flashed 7.1.1 stock via ODIN however I'm still getting the FDR account issue. All my searches have not turned up a clear cut way to reset the FDR from google. I've tried flashing FDR files, to no avail. I've also ordered a OTG USB so I can try the "samsung bypass google verify.apk" method, but that won't arrive until Monday sometime. I thought by flashing the bootloader would do it, but not finding a reliable download source. I'm even looking to downgrade to 6.x.x but that too seems to require the correct bootloader files which again I'm not finding. Any other ideas, maybe a solid walk though? Thanks in advance.
Thanks it worked, saved my ass.
PIT file plz
Internal mamory is low when flash my phone
I,m using Samsung j7 pro SM-j730f 9 pie some days ago I'm root my phone and brick my rom, than download your rom flash your mathoad, than I,m back my phone, but 1 problem internal stro is low 64 -16 gb why...? At first I,m using 64 but when flash I,m see 16 gb I give you 1 as please see and help me ...:crying::crying: just help please
Related
So I hope I'm not repeating an already posted thread but I couldn't really find any others specific to my problem AND on the Galaxy S2.
If there's already a thread about this problem feel free to abuse me for starting another one.
Basically, I've got a Samung Galaxy S2 (duh) and after trying to Root it using Superclick and Odin, I realised that I had no idea what I was doing and tried to return it to normal.
Long story short, it's currently unrooted (I think), has a Custom Binary Count of 2 (which I would like to reset), but more importantly I can't download any apps from the Market/Play Store. I don't get any errors but the apps just don't download or update.
I've done a Factory Reset (which clearly isn't technically a 'Factory Reset' because it doesn't return to normal!), and also have Superuser and CWM installed on the phone, which I would also like to get rid of.
Really I just want my phone to return to the way it was before I decided that I was smarter than I actually am.
Help? I really don't have any idea what I'm doing and really starting to regret trying to do this in the first place.
Guide to restore galaxy warranty s3
The first step will be to reset the counters Custom Binary and System Status using Triangle Away (to use it are necessary root permissions).
CAUTION: do not abuse this tools by acting on the bootloader on your phone. For today, however, were not detected negative experiences.
1_ Download from Triangle phone Away.
On the forum of Xda and present the AKP in free versionhttp://forum.xda-developers.com/showthread.php?t=1494114 .. Install it by clicking on them.
If appropriate, you can contribute to the project by purchasing the version donated directly from Google Play https://play.google.com/store/apps/...SwxLDEsImV1LmNoYWluZmlyZS50cmlhbmdsZWF3YXkiXQ..
2 _Start the app and remember to grant the rights of root ( 'Sa popup).
Confirm the download of the additional data (6 MB).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3_ Start Triangle Away and if the device has been properly recognized, confirm it by clicking on Continue.
4_ Now, click on the Reset button Flash counter.
5_The device will reboot in a particular mode
To cancel the operation, press the Volume button down'. To proceed to reset the counters instead, press the Volume Up key. CAUTION: avoid shut down or restart the phone in any other way. .
After clearing the counter, reverting by Odin the firmware Samsung original, thus eliminating any traces of rom cooked, kernel or recovery.
_From the special section of our site, and download the original firmware Samsung that you intend to install http://www.sammobile.com/firmware/. And it is stored in a file .rar, you must then unzip the file (only once) before you use it.
_If you haven't yet, download also the tool Odin https://androidfirmwares.net/Tools/Download/8 (Just extract the Odin folder.)
You will also need to install the Samsung USB drivers for the device if you haven't installed KIES. Get them from here: https://androidfirmwares.net/Tools/Download/9
Just install like any Windows program
PDA refers to the build version of the software/firmware
Phone refers to the baseband/modem version
CSC is the consumer software customisation and is specific to geographical region and carriers. It contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
.PIT refers to the partition information table you only need it if you screw up your partition table or if the firmware specifically requires it because of a change in the partition table layout. It's very likely you may never have to use this.
If the package only contains one .tar archive then it will have everything, pda+phone+csc, in the one file.
If it has multiple .tar archive then:
The .tar with modem in the name is the phone/baseband bit of the package
.tar with csc/multi-csc in the name is the csc bit of the package
.tar with code/PDA in the name is the PDA part of the firmware package
If this is the case you will need to put these .tar archives in the specific areas of Odin to flash the update. Refer to the images below.
Flashing Firmware with Odin
1. Just download the firmware version you want from the second or third posts and extract the .tar or .tar.md5 file in the archive and save it somewhere
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. If your ROM is a single .tar.md5 package click on the PDA button and browse to the .tar or .tar.md5 file that you extracted in step 1 and select it. This should like like the image below
If the package has more than one .tar archive then they will be labelled with PDA/Code, Phone/Modem and CSC. Just put them in the corresponding section of Odin like below
5. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Regardless of firmware version it's still the same methodology
6. Connect the USB cable and wait for any required drivers to install and the ID:COM section to turn blue like below
7. Click start to flash. If Odin hangs at setting up connection just unplug the USB cable and re-attach it, Odin should now resume
8. Do not disconnect the cable or turn off the device once the flash has started, it will reboot when it finishes.
If the firmware is from this thread it will not wipe your phone if you flash as recommended UNLESS I state that the firmware is a "WIPE" version.
---------- Post added at 11:34 AM ---------- Previous post was at 11:31 AM ----------
download TriangleAway v1.80 http://forum.xda-developers.com/showthread.php?p=22463153#post22463153
Try to wipe dalvik and cache from recovery
Thanks. That's all good in theory but how do I actually do all that when I can't download apps to my phone? :s
download it to pc and side load it to sd card
Play store error
anyone knows what does error (500) mean?
it said could not download due to an error (500)?
Thanks again for all the help guys but it's still not working!
I've installed Triangle Away on my phone and made sure that it's rooted (at least that's what Superclick tells me), but Triangle Away doesn't work on my phone!
Does anyone else have any smart ideas? Cos I'm struggling!
Google play error 500..re-set up APN , just try delete the proxy number you should be ok ......
---------- Post added at 12:08 PM ---------- Previous post was at 11:49 AM ----------
JWMK said:
Thanks again for all the help guys but it's still not working!
I've installed Triangle Away on my phone and made sure that it's rooted (at least that's what Superclick tells me), but Triangle Away doesn't work on my phone!
Does anyone else have any smart ideas? Cos I'm struggling!
Click to expand...
Click to collapse
Download terminal emulator ,https://play.google.com/store/apps/...251bGwsMSwxLDMsImphY2twYWwuYW5kcm9pZHRlcm0iXQ.. Then typing su , near icon$, should appear ($su) #, have permission of full root , after using Triangle Away to clear the binary counters..i used and i have not had any problems , then flash rom stock samsung..
Just tried that and it says I don't have permission?
Am I right in thinking that Superclick thinks my phone is rooted but my phone doesn't think it is? Is my phone stuck in limbo?
I just wanna be able to download apps without any hassle. Even if I can't get my binary count back to zero.
If you want to restore the firmware Samsung original, thus eliminating any traces of rom cooked, kernel or recovery , follow the guide flash with odin ...
Hi all ,
i had installed an official galaxy s2 4.1.2 rom ,and it worked perfectly. However ,all of a sudden ,it looked like it automatically updated ,and got stucked at "Optimizing app 2 of 9" or something like that . I waited for a while ,when nothing changed i have pulled out the battery and tried restarting it. So it just showed the samsung logo and didnt boot. When i tried entering the recovery mode ,it just stucked with the green JB icon..basically i could just login to download mode . I have tried flashing the rom again via odin ,but it got stucked at "factory.img" and eventually wrote "FAIL" in red . I have tried numerous roms ,stock roms but nothing seemed to work.(same problem). Now when i power up the device ,it says "Firware upgrade encountered an issue. Please select recovery mode in Kies and try again." I have tried flashing just the ClockworkMOD recovery ,but it also got stucked at "NAND Write Start!" and did nothing...
Another thing is ,that im afraid that i was running a really low space on my internal storage (16 gb) and im afraid that this is why nothing can be installed on my device..Could it be possible?
If so ,is there some way to access my storage somehow without booting up my device? Or in a worse case , how can i wipe my storage before the odin flashes?
Thanks in advance.
Listen to this guy right here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And this kid:
Feel free to try another usb socket as well.
Let us know what happens.
:laugh:
Thanks for the reply.
I have tried flashing Siyah via odin 1.85 ,but it got stucked at "NAND Write Start!!" ...
Any ideas?
Sipovka said:
:laugh:
Thanks for the reply.
I have tried flashing Siyah via odin 1.85 ,but it got stucked at "NAND Write Start!!" ...
Any ideas?
Click to expand...
Click to collapse
Try another odin version/usb cable/usb port/another pc/laptop.
I have tried different usb ports ,different computer and also different Odin version.
When i am trying to flash a complete rom ,it stucks at factoryfs.img,and if i am flashing just a kernel ,it stucks at "NAND Write Start" ...I have only one usb cable though , but it should be working fine because i was able to transfer files with it not long ago.
Could it be that lack of storage on my internal card is causing this kind of problem...?
Which sgs2 model do you have? (I9100, I9100G, I9100M, I9100P, I9100?, etc etc etc).
Which specific rom/files did you flash? (link)
These are the questions you should have answered in your first post prior to writing anything else. Without this info anything else you write is useless.
Can you provide screen shot of ODIN before clicking flash button.
Thanks for reply ,i will post soon the screenshot ,just need to gain one more post (10 or more
for posting screeshots.
I have a I9100 model and i tried a bunch of official roms for that model from different countries ,which did work for me in the past for sure ,because some of them i have kept on my hard drive.
Anyway ,here is the download link : http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=PTR&os=1&type=1#firmware
I am downloading the 4.03 version PDA I9100JHLPC CSC I9100PTRLPD
http://www.hotfile.com/dl/177046516/65bd55e/I9100JHLPC_I9100PTRLPD_PTR.zip.html - actual download link
This is the screenshot of my odin before the flash :
And this is the image after the flash ,where it gets stucked :
Sipovka said:
I have a I9100 model and i tried a bunch of official roms for that model from different countries ,which did work for me in the past for sure ,because some of them i have kept on my hard drive.
Anyway ,here is the download link : http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=PTR&os=1&type=1#firmware
I am downloading the 4.03 version PDA I9100JHLPC CSC I9100PTRLPD
http://www.hotfile.com/dl/177046516/65bd55e/I9100JHLPC_I9100PTRLPD_PTR.zip.html - actual download link
This is the screenshot of my odin before the flash :
And this is the image after the flash ,where it gets stucked :
Click to expand...
Click to collapse
Try flashing jb leak (phone, csc & modem, nothing else).
If that doesn't work, we could be talking nand corruption.
Thanks dude ,i will try it now.
What does it mean ,"nand corruption"?
Sipovka said:
Thanks dude ,i will try it now.
What does it mean ,"nand corruption"?
Click to expand...
Click to collapse
device's internal memory corrupted, can't write/read it.
That's what partitions (pit files) are for.
Well ,that didnt work as well...same scenario. I tried flashing just the rom via pda ,i tried all 4 files at the same time ,i tried just the pit...always got stucked.
I guess i will take it to my mobile service provider ,unless there is something else i could try?
P.S - If my internal card is corrupted , will they be able to see i flashed a custom rom and rooted the device?
Sipovka said:
Well ,that didnt work as well...same scenario. I tried flashing just the rom via pda ,i tried all 4 files at the same time ,i tried just the pit...always got stucked.
I guess i will take it to my mobile service provider ,unless there is something else i could try?
P.S - If my internal card is corrupted , will they be able to see i flashed a custom rom and rooted the device?
Click to expand...
Click to collapse
Lol, don't just flash pit files.
Read something about pit files first. There are a lot of threads regarding this topic.
Still stucked in boot right? no back up whatsoever?
Flash different siya's versions, see if you can get to recovery. When you do, try flashing a rom via CMW.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what to do when this happen
Without knowing what you did/why you did it/when you did it plus phone details (rom/kernel/etc/etc), how do you honestly expect help/a sensible answer to that question ?
Might wanna re-upload tha pic....
Sent from the little guy
samsung galaxy s2
MistahBungle said:
Without knowing what you did/why you did it/when you did it plus phone details (rom/kernel/etc/etc), how do you honestly expect help/a sensible answer to that question ?
Click to expand...
Click to collapse
how to upload image?
i try to upgrade...but suddenly my baby unplugg the cable
model i9100ggsmh..
there was to icon appear...white HANDPHONE & PC and then black background...
when i turn off an on again it still the same thing happen
please need help
Try imageshark.us or imagevenue.com to upload to an url.
Or post as an attachment.
I think it's force download, flash any Stock ROM via Odin.
Sent from the little guy
samsung galaxy s2 wont boot image
gastonw said:
Try imageshark.us or imagevenue.com to upload to an url.
Or post as an attachment.
I think it's force download, flash any Stock ROM via Odin.
Sent from the little guy
Click to expand...
Click to collapse
what to do...
samsung galaxy s2 wont boot image
need urgent help
Forced download mode. Get a stock rom from Samfirmware & flash it with Odin (search XDA for instructions).
Edit - And while you might think it's urgent, people will help you when someone who is able to help reads your thread. Not before. Be patient once you make a thread.
syahruwardi said:
need urgent help
Click to expand...
Click to collapse
use odin mode to flash a rom and it should work fine
MistahBungle said:
Forced download mode. Get a stock rom from Samfirmware & flash it with Odin (search XDA for instructions).
Edit - And while you might think it's urgent, people will help you when someone who is able to help reads your thread. Not before. Be patient once you make a thread.
Click to expand...
Click to collapse
sorry my bad....
i try flash with odin but it wont boot to download mode...
when i turn off and turn on again...it still same image appeare...
Keep trying to get into download mode. Turn phone off, hold power/home/volume down. If you still can't get into DL mode, try a jig. If you still can't get into DL mode even with a jig, service centre.
syahruwardi said:
sorry my bad....
i try flash with odin but it wont boot to download mode...
when i turn off and turn on again...it still same image appeare...
Click to expand...
Click to collapse
hold the button needed to go into odin mode and once the screen appears, try using odin. that happened to my phone once. i took my phone out in the middle of an odin update. the same screen appeared. i just put it back in and odin worked fine.
OP - I just realised something when I was outside having a smoke just now. The phone *is* already in download mode when you have those symbols on the screen (had a blonde moment earlier). It's just a matter of getting Odin to recognise the phone.
So....You need to try as many of the below steps as you need to in order to have Odin recognise the phone:-
*Must run Odin as administrator in Windoze.
*Ensure Kies & it's processes aren't running in Windoze task manager. Kill them if they are.
*Try different USB ports; you must be using a 'powered' or mainboard port.
*Try different USB cables (particularly the cable that came with the phone if you're not using it now)
*Try different versions of Odin (If you're using V3, use V1.3, and if that doesn't work use V1.85; search on here/Google)
*Uninstall Kies, reboot, redownload & reinstall it, reboot, try the flash again.
*Run Windoze Update.
And if all this fails, try a different PC. And if it won't work first time on another PC, go thru the above steps on that PC.
if odin doesn't recognize your device, maybe your PC doesn't have USB drivers installed.
I faced this problem when i tried to flash NeatROM but failed, and I want to get it back with the older kernel using odin, but my laptop doesn't recognize the device. I have tried different ports, but still the same.
I got the solutions by reading this thread, and finally getting directed to THIS THREAD.
- Download SAMSUNG_USB_Driver_for_Mobile_Phones.exe, and install it on your PC.
- Open ODIN whatever version and plug your device (at this point odin should recognize your device)
- flash the kernel you want
I hope my post will help
buzzing_bee said:
if odin doesn't recognize your device, maybe your PC doesn't have USB drivers installed.
I faced this problem when i tried to flash NeatROM but failed, and I want to get it back with the older kernel using odin, but my laptop doesn't recognize the device. I have tried different ports, but still the same.
I got the solutions by reading this thread, and finally getting directed to THIS THREAD.
- Download SAMSUNG_USB_Driver_for_Mobile_Phones.exe, and install it on your PC.
- Open ODIN whatever version and plug your device (at this point odin should recognize your device)
- flash the kernel you want
I hope my post will help
Click to expand...
Click to collapse
Hum...yeah, he's been thru all that already.
There are many Odin versions, some would see the device, other wouldn't.
samsung galaxy wont boot
the problem solve...i use jig thank you guy.....i appreciate
Good to hear man.
Sent from the little guy
This tutorial shows you how to Flash stock Firmware using Odin on Galaxy S Dous [S7562]
Requirements :--->
1. Odin3.07
2. Samsung Usb Driver
3. Stock Firmware
4. Official USB cable
5. Ofcourse Galaxy S Dous Phone
note :-> click on above requirements to download them..
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Flashing Tutorial :-->
1. Install usb drivers on pc....
2. reboot ur pc
3. Download the ODIN 3.07 & save it in your PC and extract its content to Desktop.
4. Download the update firmware.zip && save it in your PC and extract the update file on your Desktop.
5. Now, turn off your Samsung Galaxy S duos device
6. Boot your S Duos device into the Download mode by pressing [ Volume down + Menu + power ] buttons on the same time.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. now ur phone will boot into download mode ........u will see a "WARNING" like following pic.....
8. now press "VOLUME UP" button to enter into download mode :--> like the following pic -->
9. Now open "ODIN 3.07.exe" on desktop & attach ur phone to ur pc using stock usb cable.
10. When the connection is established with odin , u will be notified with the “added” message that will be displayed on the Odin interface, the ID:COM section should be colored on yellow or blue.
11. click on PDA button && select the S7562XXXXXX_S7562XXXXXX_XXXHOME.tar u extracted on desktop [file name may differ ]
12. now click on "START" button & it will take some time to flash the firmware ....
Note:-> DON'T interrupt the flashing process, it may brick ur device [ soft or hard brick]
13. U will see a "PASS" & "RESET" on ODIN application...
http://forum.xda-developers.com/attachment.php?attachmentid=2052420&thumb=1&d=1371571545
14. Ur phone will reboot automatically & u should be booted successfully ....
15. enjoy [ u have flashed stock firmware successfully on ur device ].:highfive::good::fingers-crossed:
F.A.Q :->
1.) If the ODIN get stuck ?
ANS:->
Close the ODIN.
Disconnect your device from the PC by removing the USB cable.
again connect the device with pc.
again open Odin
Repeat the tutorial.
2.) If your device gets a Boot Loop [ boot animation agian & agian ] ?
ANS:->
Reboot device into the Recovery Mode [ VOLUME UP + DOWN + MENU + POWER ]
Perform a “wipe data factory reset” and after that “wipe cache partition”.
Then choose “reboot system now”
_______________________________________________________________________________________________________________________
Direct download links for latest firmwares of some countries :---------->
1. Latest INDIAN Firmware --> https://docs.google.com/file/d/0B4oKK_gDpwCYQ2E2eTdYN3ozZkE/edit?usp=sharing (google drive link)
2. old Pakistan Firmware :-> https://hotfile.com/dl/182607517/5c4a6e7/S7562XXALJ4_S7562OJVALJ1_PAK.zip.html
3. old Australia Firmware :-> https://hotfile.com/dl/182237627/6d44880/S7562XXALIC_S7562XSAALI4_XSA.zip.html
3. old Malaysia Firmware :-> https://hotfile.com/dl/181722186/1341499/S7562XXALJ4_S7562OLBALH5_XME.zip.html
3. old Sri Lanka Firmware :-> https://hotfile.com/dl/229450235/834a3ca/S7562XXBMF2_S7562ODDBMF1_SLK.zip.html
_______________________________________________________________________________________________________________________
I am Not Responsible For It
_______________________________________________________________________________________________________________________
regards,
Utkarsh Mahajan
www.568team.blogspot.com
a lifesaver
You just saved my day...Cheers,hope it will work
[REQ] Stock ROM Samsung S Duos 2 GT-S7582
Hi, everyone I just deleted some system apps which i should have deleted, so i think i will have to flash the stock rom again. Can anyone please provide me the stock rom,
rajnish357 said:
Hi, everyone I just deleted some system apps which i should have deleted, so i think i will have to flash the stock rom again. Can anyone please provide me the stock rom,
Click to expand...
Click to collapse
Just search 'Samsung galaxy S duos gt s-7562 Stock rom' in google and u will see a link from idroidspace.com, click on that and find your stock rom according to your country !
Sent from my GT-S7562 using XDA Premium 4 mobile app
I upgraded from a phone from China, I put it in German software and no signal. The Chinese software was. I live in Hungary, and T-Mobile's.
U must download the stock rom for that device and select china as country; then it will be ok !
Sent from my GT-S7562 using XDA Premium 4 mobile app
ajiththiruvatta said:
U must download the stock rom for that device and select china as country; then it will be ok !
Sent from my GT-S7562 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Either way I try, there is no signal. Any firmware do it does not change the baseband! S7562ZCMH1 only. Need help
Edit: Original rom: S7562ZCAMH1_S7562CHNAMH1_S7562ZCMH1_HOME.tar
Work phone signal, any sim card, but no Play Store and hungarian language...
Edit 2:The Play Store, I managed to do it, but not the Hungarian language
gt 7582
plz help me my galaxy s duos 2 is stocked i need rom
rajnish357 said:
Hi, everyone I just deleted some system apps which i should have deleted, so i think i will have to flash the stock rom again. Can anyone please provide me the stock rom,
Click to expand...
Click to collapse
http://terafile.co/1c4339953555/S7582XXUAMK3_S7582ODDAMK1_INU.zip
first signup then download
its indian INU Version rom, odin not included
shahrukh.sk said:
You just saved my day...Cheers,hope it will work
Click to expand...
Click to collapse
i cant open my galaxy s duo after partitioning it... what should i do?? i already tried using odin but it doesnt recognize my phone... pls help...
I Have problem
plz help me
moftah1 said:
I Have problem
plz help me
Click to expand...
Click to collapse
When did this shows ?? R u able to enter download mode ???
Sent from my GT-S7562 using XDA Premium 4 mobile app
How its possible
ajiththiruvatta said:
When did this shows ?? R u able to enter download mode ???
Sent from my GT-S7562 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have never experienced this problem
and i have wrote i am not responisible but i may help you search on internet
I'm having a problem: I need to flash a different baseband on my phone to be able to install a custom ROM (if I don't I won't be able to call and receive calls or use SMS), but whenever I flash a new ROM the baseband won't change. I heard in this thread http://forum.xda-developers.com/showthread.php?t=2625200 that I can flash only the baseband using the Fat.bin file inside the stock ROM, but I'm afraid this might brick my phone since the thread doesn't have much feedback. And before you ask, yes, I'm entering download mode by powering off then Vol down+Home+Power.
I used the ROM (PMP Ultra) for a little bit and I really loved it, but I can't use it if I'm unable to use SMS and call other people.
BigThing said:
http://terafile.co/1c4339953555/S7582XXUAMK3_S7582ODDAMK1_INU.zip
first signup then download
its indian INU Version rom, odin not included
Click to expand...
Click to collapse
don't need to sign up
try regular download
---------- Post added at 03:16 AM ---------- Previous post was at 03:09 AM ----------
Rockerbacon said:
I'm having a problem: I need to flash a different baseband on my phone to be able to install a custom ROM (if I don't I won't be able to call and receive calls or use SMS), but whenever I flash a new ROM the baseband won't change. I heard in this thread http://forum.xda-developers.com/showthread.php?t=2625200 that I can flash only the baseband using the Fat.bin file inside the stock ROM, but I'm afraid this might brick my phone since the thread doesn't have much feedback. And before you ask, yes, I'm entering download mode by powering off then Vol down+Home+Power.
I used the ROM (PMP Ultra) for a little bit and I really loved it, but I can't use it if I'm unable to use SMS and call other people.
Click to expand...
Click to collapse
don't afraid try it but take a back up of stock firmware before flashing
I tried to flash the fat.bin file, but it didn't work. Right before the phone restarted to complete the flashing I noticed an error message "secure check fail ID: 10 xc" or something similar. Anyone knows what it could mean?
jiegulo said:
i cant open my galaxy s duo after partitioning it... what should i do?? i already tried using odin but it doesnt recognize my phone... pls help...
Click to expand...
Click to collapse
Don't tell me you tried partitioning your internal storage did you?
---------- Post added at 12:50 AM ---------- Previous post was at 12:47 AM ----------
You have bricked your phone bro.Did you try entering Odin mode?
original firmware for all samsung devices
http://www.samfirmware.com/ here you can get all samsung mobile firmware
i am not responsible for happen anything for your phone
i am leaving the xda forums
Flash problem
After flash stock rom my lock screen & power menu not working:crying:. What I have to do now?
saiful725 said:
After flash stock rom my lock screen & power menu not working:crying:. What I have to do now?
Click to expand...
Click to collapse
just reflash
Hello everyone, my a21 (SM-A215U) can not go into download mode with the key combinations (volume+, volume - and power) and does not display anything when it is plugged in. I have tried everything and nothing when I plug it in on the computer it makes constant noises (like connecting and disconnecting) and displays **MTK65xx preloader** at each connection which can last only a few seconds. Does this mean that it is in soft brick or hard brick. Please help me to fix it
What did you do to it?
Is it stock or rooted?
Well I flashed it using odin, but unfortunately it died. It does not turn on, even in charge nothing is displayed on the screen
You bricked it, not sure how bad. Hopefully someone here has a plan for you.
Is the battery in good condition?
Maybe, but I don't know to what extent because the key combinations no longer work so I can't enter download mode. The battery is in good condition
.....So, I would like to know if there is a way or trick to be able to put it in download mode so that I can flash it with odin or if there is an application that I can install on my PC to repair it.
Hello everyone, I think you can all be busy with your business, but can someone help me out of this horrible situation because I no longer have a phone to work.
Cordially
Hello
After some manipulations, the only sign of life and hope that I have is when I plug it into my computer it now displays: **MediaTeK preloader usb Vcom (Android)(com)** it always does constant noises (like connecting and disconnecting) the connection can last only a few seconds.
So I am still unable to put it in download mode via key combinations. What are the possible ways to enter download mode? or at least force it.
Do I have a small chance that it will be repaired.
Thank you
Bests Regards
Hello,
While I'm waiting for your advice to repair my galaxy a21 sm-215u, please I need stock rom / firmware with MT6765_Android_scatter for Samsung galaxy a21 Chipset 64bits - MediaTek Helio P35 (MT6765), because I can’t go into download mode with the key combinations (volume+, volume - and power) for flash by odin. I would like to try fix it with SP Flash tool.
Thanks to all
Hello everyone,
Maybe you are all busy with your activities, but I noticed that no one has reacted to the case of my a21, sure that there is no other solution than threw it in the trash. Please share with any tips or possible ways to help me fix it.
I'm really in trouble
I actually just did this myself the other day i had 2 A215u one was android 11 and frp locked and one was android 10 and unlocked while trying to root the one on android 10 it went black no response to anything plug it in to the computer it shows up as mt6765 preloader. And it just continuously connects and disconnects in device manager ive been trying to get sp flashtools to get it back to life because odin cant find it and im at a loss so im stick with the frp locked one which i cant get unlocked for the life of me even though I just FRP unlocked one a couple weeks ago but I think it might have been running Android 10 and not 11 I don't remember so I have no solution for you but I'm along for the ride
Hello everyone,
I am looking for a website where I can download: SM-A215U(DSH) A215USQU5AUI1/A215UOYN5AUI1/A215USQU5AUI1 for free.
I must tell you that I have tried several means but the only two that give me hope are the SP Flash Tool and the SWD AfterSales Tool. And both give me the same errors. For the SWD AfterSales Toolc is: Connecting to brom failed STATUS_SEC_AUTH_FILE_NEEDED and for SP Flash Tool: STATUS_SEC_AUTH_FILE_NEEDED (0xC0030012) and when I used bypass utility it is: BROM ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A) or STATUS_SEC_IMG_TOO_LARGE (0xC0020005) everything depends on the manipulations I have carried out. The only region I haven't tried is DSH, I try all the others such as: BST, CHA, TMK, VZW, SPR, etc...
Thanks to all
Bests regards
Samsung Firmware Download - Lastest official firmware update
Samsung Firmware Download ⭐ Official and fast update ⭐ Lastest and old version ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
will this be any help?
Hello everyone,
Especially LR7875, thank you for the link but unfortunately I could not find region DSH, OS 10 for version A215USQU5AUI1. See photo below. Therefore is it possible to find a MT6765_Android_scatter.txt for Samsung Galaxy A21 (SM-A215U) (DSH) A215USQU5AUI1/A215UOYN5AUI1/A215USQU5AUI1 OS version: 10 in your hands.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Vcj said:
Hello everyone,
Especially LR7875, thank you for the link but unfortunately I could not find region DSH, OS 10 for version A215USQU5AUI1. See photo below. Therefore is it possible to find a MT6765_Android_scatter.txt for Samsung Galaxy A21 (SM-A215U) (DSH) A215USQU5AUI1/A215UOYN5AUI1/A215USQU5AUI1 OS version: 10 in your hands.
View attachment 5621131
Click to expand...
Click to collapse
What if you flash a wrong version? Will it brick it even more?
Hello everyone,
Here are in pictures the errors of the different regions that I have already tried
I saw this post from GonicTeam:
https://forum.xda-developers.com/t/...r-samsung-galaxy-a10s-stuck-on-a-black-screen-recognized-as-preloader-usb-vcom-and-cycling-rebooting.4322581/post-85512967
I did everything, but getting to part 5 I can't extract the preloader binary as explain. Maybe this method is not compatible with the samsung A21, which can help me more
See link below
[GUIDE][SM-A107][MTK6765] Unbrick your Samsung Galaxy A10s - Stuck on a black screen, recognized as Preloader USB VCOM and cycling rebooting
Hi, yesterday I bricked my Galaxy A10s by flashing a custom recovery by Odin (The phone doesn't enter in Download or recovery modes, it just does nothing): Immediately I started looking for how to fix it, and after a lot of research, here is how...
forum.xda-developers.com
Ive been trying all these things as well so i got one of mine to cone back to a bootloop and now no matter what i flash to it the carrier it is and every other firmware i could download and have tried every versionof odin that there is and it still no matter what bootloops then on my other one i get stuck with various spflashtool errors this has all been very annoying i dont think ill mess with any mtk samsungs anymore ill stick to tje qualcomm
Hello everyone,
I try to flash the phone with sp flash tool after more combinaison but am getting this error: STATUS_MMC_ERROR (0XC0040030)
and am trying to look for the solution over the internet but i have failed so please kindly help
using these instructions
[GUIDE][SM-A107][MTK6765] Unbrick your Samsung Galaxy A10s - Stuck on a black screen, recognized as Preloader USB VCOM and cycling rebooting
Hi, yesterday I bricked my Galaxy A10s by flashing a custom recovery by Odin (The phone doesn't enter in Download or recovery modes, it just does nothing): Immediately I started looking for how to fix it, and after a lot of research, here is how...
forum.xda-developers.com
file recovery
66.96 MB file on MEGA
mega.nz
you can thank: PayPal: @gmsservice512