I'm having real difficulties with my i9100P device, and would like some help as I'm getting frustrated with what should be an easy thing to do
The handset is 4.1.2 (O2 UK) and developer debugging is enabled.
When I try to flash Philz recovery (6.48) or TWRP (3.1.0 i9100) or Ganster IsoRec (3.1.0) Odin (3.12) starts the process fine, then comes up with:
Get PIT for mapping
Firmare update start
SingleDownload
recovery.img
FAIL!
Complete(Write) operation failed.
All threads completed (succeed 0 / failed 1)
I'm trying to install Slimrom 4.4.4
Related
Hi, I bought a used SGS3. I want to root it as I have allways done with my Android phones.
After a lot of hours I spent trying to do it I find out that it could be related to: "CUSTOM BINARY DOWNLOAD: NO" message.
The facts:
- As I know the only way to root the device is using "custom binary download" mode.
- When I try to do it I read at download mode:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
- Odin allways fails at this point and I suppose it is related to above message.
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Added!!
- As I read to increase the binary download counter I need to be root, but I am not.
Conclusion: I will never be root, change de ROM or use privileged apps like backup apps and a device like that is useless for me.
I spent a lot of time trying to solve this and I am desperate.
I will thank any hint on this. Do I have any chance to fix this, root de device and chage ROM to cyanogen or other?
Thanks,
txemi
Do you want to root your s3 or flash custom ROMs?
Device: Samsung Galaxy S3
ROM: CyanogenMod 11 (Temasek Unofficial V24)
Kernel: Boeffla-Kernel-CM11-2.1-Beta7-
Both. I think I cannot flash if I am not root. I would like to be able to became root first and later flash custom ROMs.
txemitron said:
Both. I think I cannot flash if I am not root. I would like to be able to became root first and later flash custom ROMs.
Click to expand...
Click to collapse
Okay.
First go in download mode and flash the CWM (Clockworkmod Recorvery) for your s3 via Odin in Bootloader.
Device: Samsung Galaxy S3
ROM: CyanogenMod 11 (Temasek Unofficial V24)
Kernel: Boeffla-Kernel-CM11-2.1-Beta7-
Odin usually fails with:
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
txemitron said:
Odin usually fails with:
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
did you flash cf autoroot ? does odin see the phone? while flashing you must be in download mode. it shouldnt take more than a few seconds
txemitron said:
Odin usually fails with:
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Select file from PDA button and uncheck re-partition
GT-I9300 cihazımdan Tapatalk kullanılarak gönderildi
After some tests with linux and analyzing dmesg and lsubs output I realised that the real problem was not a software issue, hardware usb port instead.
Being a used phone I have just bought USB cable cannot fit properly in usb port and is nearly impossible to have an usb stable connection. It is not a problem of CUSTOM BINARY DOWNLOAD, it is a problem with any thing requiring usb connection. It seems previous owner did not mind because he used the phone as is and did not use usb for data transfers.
I tryed some cables I have at home but they did not work, now I do not know what to do. I am considering next options, I do not know if there are any more.
1) Going to Samsung tech support. I am not sure if it is expensive or it does take a long time to get phone fixed.
2) Try to give the phone back to seller.
3) Spend a lot of time and going crazy testing usb cables in case some work.
4) Look for some buyer that does not mind about usb and buy another phone for me.
Thanks again for your responses,
txemi
I have searched threads here as well as other places and have had no success.
Device: Verizon Samsung Galaxy S3 (SCH-I535)
Info: Stock, non-root and no ROMS
Current firmware: KitKat 4.4.2
I was trying to use Odin 3.09 to revert to the firmware version 4.1.2 (which I got from http://www.sammobile.com/firmwares/) in order to install CM 11. I entered the phone into download mode and entered the 4.1.2 firmware file. Everything loaded and connected fine. I clicked Start and it stopped at aboot.mbn and failed because I think 4.4.2 has a locked bootloader. I also think I tripped the Knox Security flag and therefore it is now softbricked. The phone can still go into Download mode but not recovery mode.
I followed two guides to unbrick it:
1) http://forum.xda-developers.com/showthread.php?t=2581166
The microSD card method did not work. I have not tried JTAG.
2) http://www.androidauthority.com/galaxy-s3-i535-unbrick-soft-brick-125413/
Odin once again fails and cannot flash the VRALEC.bootchain.tar.md5 file, leaving the same error as before:
HTML:
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This error appears on my phone:
HTML:
SW REV CHECK FAIL: Fused 2 > Binary 0
What can I do now?
scorpadorp said:
What can I do now?
Click to expand...
Click to collapse
you could post your question in the correct forum http://forum.xda-developers.com/galaxy-s3-verizon
this here is i9300 international forum, so probably no one can help, espacially because i9300 has no knox.
scorpadorp said:
I have searched threads here as well as other places and have had no success.
Device: Verizon Samsung Galaxy S3 (SCH-I535)
Info: Stock, non-root and no ROMS
Current firmware: KitKat 4.4.2
I was trying to use Odin 3.09 to revert to the firmware version 4.1.2 (which I got from http://www.sammobile.com/firmwares/) in order to install CM 11. I entered the phone into download mode and entered the 4.1.2 firmware file. Everything loaded and connected fine. I clicked Start and it stopped at aboot.mbn and failed because I think 4.4.2 has a locked bootloader. I also think I tripped the Knox Security flag and therefore it is now softbricked. The phone can still go into Download mode but not recovery mode.
I followed two guides to unbrick it:
1) http://forum.xda-developers.com/showthread.php?t=2581166
The microSD card method did not work. I have not tried JTAG.
2) http://www.androidauthority.com/galaxy-s3-i535-unbrick-soft-brick-125413/
Odin once again fails and cannot flash the VRALEC.bootchain.tar.md5 file, leaving the same error as before:
HTML:
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This error appears on my phone:
HTML:
SW REV CHECK FAIL: Fused 2 > Binary 0
What can I do now?
Click to expand...
Click to collapse
I know my post maybe can't help you but I has the same problem with a Samsung Galaxy Mini 2 and I go to a SAMSUNG service and they resolved me. And I think this brick is because any Samsung device is not able to downgrade to an old version...
Read this about downgrade:
http://forum.xda-developers.com/showthread.php?t=2613745&page=2
I tried rooting (my first time) and loading a gummy rom onto my s3 a couple days ago and ended up soft-bricking my phone and nothing I'm trying is bringing it back. Here's what I did:
- I rooted the phone and installed CWM 5.5. From there I made a backup of my phone and copied Gummy-M2.2-06-19-14-NIGHTLY-d2lte.zip and GApps_Standard_4.4.4_signed.zip onto my phone. I tried erasing the caches, installing the gummy rom from zip using CWM and it failed with a status 7. When I tried rebooting the phone it gets to the AT&T logo and freezes there everytime and even after everything I've tried, it is still stuck there.
Here are the things I tried to fix it:
- First thing I did was factory reset, erase the cache, dalvik cache, and tried to restore. Still stuck at the logo.
- Then I tried factory resetting it, erasing the caches and rebooting. No go.
- I tried modifying the updater-script file in the gummy rom to remove the check for my device but I still got an error when I tried loading it in CWM.
- I tried downloading a stock AT&T rom and flashing with Odin 1.8.5 and 3.09 but odin always gives me this:
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone in download mode gives the following error after I try flashing:
SW REV CHECK FAIL : Fused 2 > Binary 0
The stock ROM I tried is I747UCDLK3_I747ATTDLK3_ATT. I've downloaded multiple copies of this and tried them all to no avail.
I'm starting to read about boot chains, bootloaders, and PIT files but I'm very reluctant to try any of that bc from what I can tell it can be very risky. Please help, I'm at a loss now and running out of ideas.
I'm at a day and a half of troubleshooting this and I can really use some help. I found this link which seemed to describe my issue perfectly but the files listed there are for verizon (I'm AT&T). I searched google but can't seem to find the right files.
You must flash an other stock rom (4.2.3 for example) and you will have to update it before rooting.
i really want Cyanogenmod thats why i am already 3 days working on it, first try i install cm 10.2 because this is what i saw in IBM times, btw my S3 is stock 4.3 before i start flashing cm. after flashing cm10.2 got unknown IMEI and unknown baseband, wht i did is to flash again stock firmware via odin,I9300XXUGNB6_I9300OJVGNB3_I9300XXUGNA8_HOME.tar, after flashing, everything went fien, my imei and baseband restore to normal, again i root my s3, and flash again the CM10.2, success and the baseband and IMEI still ok, BUT THE problem is no service, no signal/network....flash again stock, and my friend told me to try from http://get.cm after that success, BUT still the problem is no service.......... i root again and try to patch with ariza, but cant, when i check odin mode, i see the binary counts: YES 3counts, and after that i use triangle away, to reset, success, reseted.
now i want to flash with stock firmware and stop using custom rom, (frustrated).........
first try, flashing complete! but after restart...samsung logo only...
try again flash by ODIN, it doesnt continue this time,
OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i hope somebody will try to help me...back to stock!
thnks
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 try to flash this ,if it fails then emmc chip is damaged, new motherboard required
flash again with stock 3 times, back to normal thanks for reply
I have encounter some issues when rooting Samsung A10s with Odin. My Samsung A10s AP: A107FXXU5ATA9 And the CSC is A107FOLM5ATA8.
Below is the message in Odin:
vbmeta.img
boot.img
recovery.img
Complete(Write) operation failed
(OSM) All threads completed. (succeed 0 / failed 1)
Samsung a10
Root
Garetok256 said:
I have encounter some issues when rooting Samsung A10s with Odin. My Samsung A10s AP: A107FXXU5ATA9 And the CSC is A107FOLM5ATA8.
Below is the message in Odin:
vbmeta.img
boot.img
recovery.img
Complete(Write) operation failed
(OSM) All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Odin messages rarely help. Look at any red message your phone throws out and tell us what that says.
I think I am facing similar issues, did you find a solution?