Related
So, I've been willing to Flash a Lollipop Rom on my phone to enjoy the trusted device functionality without the need of a third party app but I realised I had to reset my watch in order to re-pair it with my phone...is there any way around it ? I guess if I reset I'll have to download the OTA's update for the watch again ?
You can use Beelink.apk for resync without resetting the watch. Anyway the reset is over the latest firmware, so you dont have to download again the OTAS. I've not tried the resync, but I guess that you must install the same apps again, beelink app works great, but I don't know if it will work perfectly. I only can say that beelink unpair the watch for pairing with another device. Reply me if you want the beelink.apk, was deleted from playstore. You must install it on the watch throught ADB command line. I've tried unpair my phone for re-pair again with the same phone 5 minutes later, and it works.
prototovsky said:
You can use Beelink.apk for resync without resetting the watch. Anyway the reset is over the latest firmware, so you dont have to download again the OTAS. I've not tried the resync, but I guess that you must install the same apps again, beelink app works great, but I don't know if it will work perfectly. I only can say that beelink unpair the watch for pairing with another device. Reply me if you want the beelink.apk, was deleted from playstore. You must install it on the watch throught ADB command line. I've tried unpair my phone for re-pair again with the same phone 5 minutes later, and it works.
Click to expand...
Click to collapse
Thanks for your answer I'll try and find beelink but but a link would be greatly appreciated
nicolahaye said:
Thanks for your answer I'll try and find beelink but but a link would be greatly appreciated
Click to expand...
Click to collapse
Here´s the link
Tell us if this works please!, it may be helpful for others
Hi,
beelink don't have any interface and no effect after wipe my phone, can't connect to my watch without wipe.
edit: you must start beelink on the watch and send the pairing request from the watch
regards
starbase64
Yes, and it did not pair?
Works here, but send pair request via beelink from watch.
starbase64 said:
Works here, but send pair request via beelink from watch.
Click to expand...
Click to collapse
I know, this app only runs on watch, but does your phone pair with the watch vía beelink? It may be paired succesfully.
Try this: http://forum.xda-developers.com/and.../app-reset-wear-client-switch-phones-t3058962
I don't understand the big deal of resetting the watch.
Not to mention, you shouldn't need to reset it at all. Just go to SETTINGS and UNPAIR. Then pair it to a new ROM or Phone. It will synch as soon as it pairs to a "new" device or ROM.
Works pretty well.
I can understand wanting to reset for that fresh start feeling, so... what's the big deal?
7eregrine said:
I don't understand the big deal of resetting the watch.
Not to mention, you shouldn't need to reset it at all. Just go to SETTINGS and UNPAIR. Then pair it to a new ROM or Phone. It will synch as soon as it pairs to a "new" device or ROM.
Works pretty well.
I can understand wanting to reset for that fresh start feeling, so... what's the big deal?
Click to expand...
Click to collapse
No you can't just unpair from the watch and connect to a new rom or phone. You have to reset the watch. That's how it works unless you use Beelink or the new wear reset client.
I've tried using the app too, and it doesn't pair the 2nd phone.
7eregrine said:
I don't understand the big deal of resetting the watch.
Not to mention, you shouldn't need to reset it at all. Just go to SETTINGS and UNPAIR. Then pair it to a new ROM or Phone. It will synch as soon as it pairs to a "new" device or ROM.
Works pretty well.
I can understand wanting to reset for that fresh start feeling, so... what's the big deal?
Click to expand...
Click to collapse
Android Wear does not allow you to unpair the device from your main phone and does not allow you to pair it up with a new mobile device via the bluetooth settings menu. You must reset the device for it to go through OOTB again, during which the connected mobile is added to the Android Wear app's database/settings on the watch.
Use the Wear app.
stevemw said:
Use the Wear app.
Click to expand...
Click to collapse
The OP was asking if he could switch devices the watch was connected to after switching ROMs or Devices. The Android Wear app does not work for this purpose as it doesn't reset the connected device to accept a new connection, nor can it be used when there isn't a device paired with it. (Simply pairing through the Bluetooth settings menu does nothing).
ShadowEO said:
Android Wear does not allow you to unpair the device from your main phone and does not allow you to pair it up with a new mobile device via the bluetooth settings menu. You must reset the device for it to go through OOTB again, during which the connected mobile is added to the Android Wear app's database/settings on the watch.
Click to expand...
Click to collapse
Missed this reply. You absolutely can Un-pair, and Re-pair. You can Un-pair devices right from the watch itself. And if you can Un-pair from the Watch, what would possibly prevent you from pairing it to a new device?
//EDIT// OK maybe not. Just tried to Unpair from the Watch. Settings > Unpair > pretty much a blank screen. Nothing to do here. Why is this option here then??
That really wasn't the point I wanted to make, though.
Resetting the Watch is no big deal. Not like there is anything you need to backup. Reset, Re-pair, Resynch. Done.
---------- Post added at 04:49 PM ---------- Previous post was at 04:37 PM ----------
In the interest of putting my money where my mouth is, I just reset my Watch. Wanted to try something anyway, so why not.
Annnnd: it's been 5 minutes it has already synched more then half my apps. Should be done in 10. Other then having to reset up and apps I said to "Not Bother Me" what is the downside of resetting?
Facer was the only app to not Synch. Went into AW and Forced a resynch. Everything is there now. Time spent, about 12 minutes.
7eregrine said:
Missed this reply. You absolutely can Un-pair, and Re-pair. You can Un-pair devices right from the watch itself. And if you can Un-pair from the Watch, what would possibly prevent you from pairing it to a new device?
//EDIT// OK maybe not. Just tried to Unpair from the Watch. Settings > Unpair > pretty much a blank screen. Nothing to do here. Why is this option here then??
That really wasn't the point I wanted to make, though.
Resetting the Watch is no big deal. Not like there is anything you need to backup. Reset, Re-pair, Resynch. Done.
---------- Post added at 04:49 PM ---------- Previous post was at 04:37 PM ----------
In the interest of putting my money where my mouth is, I just reset my Watch. Wanted to try something anyway, so why not.
Annnnd: it's been 5 minutes it has already synched more then half my apps. Should be done in 10. Other then having to reset up and apps I said to "Not Bother Me" what is the downside of resetting?
Facer was the only app to not Synch. Went into AW and Forced a resynch. Everything is there now. Time spent, about 12 minutes.
Click to expand...
Click to collapse
There isn't really a downside to resetting honestly. Unless you use Google Play Music and have about 200+ songs synchronized, you should be good to go very shortly after that. I do agree that it is really no big deal resetting the device.
Indeed I tried beelink and i finally find it easier to reset every time I flash a new ROM no big deal since I don't sync songs
Hi everyone,
Just wanna ask if anyone encounter problem connecting to the smartphone after the recent MIUI update?.
Just to share.. I had.. I couldn't even get it syn repeatedly even uninstalled and then reinstall the mi fit.
I have already sent this complaint to the respective people... Hope to hear and see that they can rectify this error...
Now my watch is lay there... Not able to use at all. Have to get another smart band/band for my activity tracking...
If anyone have solved this problem.... Please share.. Appreciate
Sent from my Redmi Note 4 using Tapatalk
Did you grant the app all permissions in app settings, and removed it from any battery saving service?
Not sure where to ask but rather making a new thread. Does the BIP have good custom ROM potential? If not, which Amazfit, or any smartwatch with month battery should I go for?
I have looked around and only found stuff for Pace. And also those sideloaded Google apps, is it possible on the BIP as well?
s3nr1 said:
Not sure where to ask but rather making a new thread. Does the BIP have good custom ROM potential? If not, which Amazfit, or any smartwatch with month battery should I go for?
I have looked around and only found stuff for Pace. And also those sideloaded Google apps, is it possible on the BIP as well?
Click to expand...
Click to collapse
The Bip does not run Android, it runs a custom OS, no sideloading of apps at all and no ROMs
lfom said:
Did you grant the app all permissions in app settings, and removed it from any battery saving service?
Click to expand...
Click to collapse
I did all those.. But still it failed to connect.. Anyway many thanks for the suggestion.... Appreciate...
Sent from my Redmi Note 4 using Tapatalk
Hi there,
I don't seem to be able to use the phone function on my Verge. I have the latest software update but I didn't find any way of making the watch get notification from the calls coming into my S10E. is this a Samsung issue?
Thanks to anyone who will respond.
Dedalus73 said:
Hi there,
I don't seem to be able to use the phone function on my Verge. I have the latest software update but I didn't find any way of making the watch get notification from the calls coming into my S10E. is this a Samsung issue?
Thanks to anyone who will respond.
Click to expand...
Click to collapse
Be sure you have latest update of:
Watch app (3.2.0-Play) - https://play.google.com/store/apps/details?id=com.huami.watch.hmwatchmanager&hl=en
Watch Verge (ROM) (3.2.5.0)
Then go to Amazfit watch app:
1. Open app
2. Profile
3. Amazfit Verge
4. Scroll to down
5. Notifications settings
6. Must be market/checked these: a) Push notification (must be red dot) b) in Push notifications must be added app which in yours phone is responsible of incoming calls. Also keep in my must be all permissions enabled, after update sometime need to enable it again. If still will not helps, do factory reset of watch Verge, with re-install app Amazfit in yours phones (I doing like this often, helping me), but without restore of data in Amazfit app. It's important !!!
IMPORTANT: After factory reset in watch you will lose that day activities information. But don't worry it must be show in Amazfit watch app anyway, you just couldn't to see it in that day when you will do factory reset in watch, past days must be showed. For me working everything like this
Thanks for the reply but it doesn't work
Dedalus73 said:
Thanks for the reply but it doesn't work
Click to expand...
Click to collapse
Sad Did you tried to connect/pair with other smartphone? Factory reset of watch Verge for me most time working, re-install of Amazfit watch app asking all the time to give permissions from new, so you ca be sure that you will gives it 100% right, but if you after all these steps still have this problem, you just can try to connect/pair with others smartphone, even with the same account, if working on others smartphone, that's mean with your S10 something wrong, if no and problem persist maybe you using AmazMode app or something like this? Then developers will help you better
My smartphone is not rooted, in watch is official ROM and I using it without any 3rd parties apps software and ect.
yes, with Pocophone it works very well. THe issue with Samsung is double sim. If I turn off one of the two sims the calls arrive to the Verge about once in every 10 tries. The other 9 the Verge vibrates a bit then stops and the call is not shown. I only get the notification of missed call. If I turn on both sim cards the Verge doesn't receive the call. Is there a way to inform AMAZFIT developers of this?
Are you using the stock Samsung ROM? Did you try installing a third party app for calls, like Contacts+?
You can send feedback from the app's help section (probably it will arrive in the Chinese support) or use this link if you have an International model:
https://support.amazfit.com/hc/en-us/requests/new
lfom said:
Are you using the stock Samsung ROM? Did you try installing a third party app for calls, like Contacts+?
You can send feedback from the app's help section (probably it will arrive in the Chinese support) or use this link if you have an International model:
https://support.amazfit.com/hc/en-us/requests/new
Click to expand...
Click to collapse
Yes I'm using stock S10E rom. Third party app for calls on the phone you mean? No, I haven't tried.
Thanks for the link!
Dedalus73 said:
Yes I'm using stock S10E rom. Third party app for calls on the phone you mean? No, I haven't tried.
Thanks for the link!
Click to expand...
Click to collapse
I mean this app https://play.google.com/store/apps/details?id=com.edotassi.amazmod&hl=en_US. I think it not just for call If you using everything stock then strange and I advise you to talk with Amazfit Support in https://en.amazfit.com/support.html (Global, via mail) or https://support.amazfit.com/hc/en-us/categories/360001563933-Verge-Smartwatch. But I don't know why, but I have feelings that you doing something wrong, it can be that you did not gave permission for call notifications. As I mentioned try to factory reset (sometime it helping after several times), app to delete and re-install after reboot of smartphone, I don't have smartphone with PIE, but in these steps I don't think is something big differences as is in Marshmallow Good luck :highfive:
Got my stratos 3 just before Christmas and I'm suffering several annoying bugs with 4.2.4.0
1. After changing from ultra to smart, touchscreen doesn't work. If I reboot the watch again the touch comes to normal;
2. During some sports sometimes the screen doesn't update, I have to unlock to get updated info such as time;
3. When following a GPX track, if the track name inside the GPX is big, the watch render the trail twice with a distance between the renders turning it difficult to follow a track;
4. Not really a bug, but annoying: It's slow to change between tracks on music player (bluetooth) my old amz pace was instantaneous;
5. When hold the back button it return to the watchface but make all physical buttons unresponsive. Also happens randomly;
6. App doesn't shows vo2 info;
7. Impossible to transfer a large mp3 file (140mb podcast) thru file manager.
8. After a factory reset, tried to transfer 5 mp3 files (~20mb each). Transfer was interrupted and usb was not working. After a watch reboot usb got working again and I could transfer each file individually and waiting some seconds between transfers.
It really seems like a unfinished firmware with some simple test problems, the touch problem is really simple to test but maybe it's just me.
Anyone suffering from the same problems?
i bougth a stratos 3 bircked, i need the firmware multilang to try to repair, anyone can help me?
Hi,
no pb with touchscreen for me ( switching from ultra to smart)
pb with update screen i've noticed some bugs sometimes
Did no try GPX since a long time but it was working well
no pb with back button.
Vo2 max is only working with running workouts.
i face a pb with altitude in smart mode on the watch it seems ok but on the app/strava i have not same values...
it is only in smart mode (in ultra seems ok)
during workout altitude in standby vs active is not the same.
hope they'll publish a new firmware soon
hi
My watch cannot be paired and I am waiting for new firmware.
Yesterday, mine lost the connection with my phone. I am totally disappointed :crying:
Next to other problems (no sync with Strava), I am fed up with this watch
I've got exactly the same problem. Right now my touchscreen doesn't work at all.
Hello everyone,
Talking about bugs, I got my Stratos3 end of last week, international version updated to last stock ROM (I checked and bootloader is locked).
Is anyone else having problems with notifications?
The call reminder is working, but I don't get any notifications... so only phone calls are working.
Yes, all is enabeled, I double checked, I also tried to dissable and enable notifications again, reboot etc.
Phone is Xiaomi Mi9 with xiaomi.eu beta custom ROM - Android10.
Is it a Stratos bug? Or it could be MIUI?
mxxt01 said:
Hello everyone,
Talking about bugs, I got my Stratos3 end of last week, international version updated to last stock ROM (I checked and bootloader is locked).
Is anyone else having problems with notifications?
The call reminder is working, but I don't get any notifications... so only phone calls are working.
Yes, all is enabeled, I double checked, I also tried to dissable and enable notifications again, reboot etc.
Phone is Xiaomi Mi9 with xiaomi.eu beta custom ROM - Android10.
Is it a Stratos bug? Or it could be MIUI?
Click to expand...
Click to collapse
check in notification config on amazapp => notification push on => check apps that are autorized to send notification to watch
mxxt01 said:
Hello everyone,
Talking about bugs, I got my Stratos3 end of last week, international version updated to last stock ROM (I checked and bootloader is locked).
Is anyone else having problems with notifications?
The call reminder is working, but I don't get any notifications... so only phone calls are working.
Yes, all is enabeled, I double checked, I also tried to dissable and enable notifications again, reboot etc.
Phone is Xiaomi Mi9 with xiaomi.eu beta custom ROM - Android10.
Is it a Stratos bug? Or it could be MIUI?
Click to expand...
Click to collapse
Notifications works for me. I'm using a mi 9 lite miui 11 global version stock.
For notifications you need two things:
1. Amazfit Notification access permission (Notification access in miui settings)
2. Mark apps inside amazfit app on notifications settings
winni21 said:
check in notification config on amazapp => notification push on => check apps that are autorized to send notification to watch
Click to expand...
Click to collapse
Checked once again. Push notifications are ON, and ALL apps including also system apps are checked. Strange.
Test notification IS working?
lindomaroliveira said:
Notifications works for me. I'm using a mi 9 lite miui 11 global version stock.
For notifications you need two things:
1. Amazfit Notification access permission (Notification access in miui settings)
2. Mark apps inside amazfit app on notifications settings
Click to expand...
Click to collapse
Chacked also this once again, Amazfit app has notification access permission.
And all apps in app notification setting are marked - notifications allowed.
Could be a MIUI beta thing maybe.... I will try later today without batter optimization. That's the only thing that comes to my mind right now.
Do you have Stratos 3 International or Chinese version?
---------- Post added at 11:23 AM ---------- Previous post was at 11:20 AM ----------
winni21 said:
Test notification IS working?
Click to expand...
Click to collapse
Yes, all test notifications are working.
Call notification is also OK.
Find my phone function is working.
But all other notifications are not working on the watch...
Maybe I should try a factory reset?
mxxt01 said:
Chacked also this once again, Amazfit app has notification access permission.
And all apps in app notification setting are marked - notifications allowed.
Could be a MIUI beta thing maybe.... I will try later today without batter optimization. That's the only thing that comes to my mind right now.
Do you have Stratos 3 International or Chinese version?
---------- Post added at 11:23 AM ---------- Previous post was at 11:20 AM ----------
Yes, all test notifications are working.
Call notification is also OK.
Find my phone function is working.
But all other notifications are not working on the watch...
Maybe I should try a factory reset?
Click to expand...
Click to collapse
Internacional.
Seems like a phone/rom problem.
I would clean reinstall Amazfit app first.
Maybe you have access to another smartphone just to test.
lindomaroliveira said:
Internacional.
Seems like a phone/rom problem.
I would clean reinstall Amazfit app first.
Maybe you have access to another smartphone just to test.
Click to expand...
Click to collapse
Smart! Thanks for the idea, I will test it on my Samsung phone. Completly forgot to do that [emoji16]
Yeah, I'm pretty sure it's a phone rom issue if you guys have no notification problems...
Poslano z mojega MI 9 z uporabo Tapatalk
Here's an update of my notification issue: after some playing with install/uninstall AmazMod service on the watch + a few reboots, the notifications seems to work now (without AmazMod installed) [emoji16]
Poslano z mojega SM-T810 z uporabo Tapatalk
mxxt01 said:
Here's an update of my notification issue: after some playing with install/uninstall AmazMod service on the watch + a few reboots, the notifications seems to work now (without AmazMod installed) [emoji16]
Poslano z mojega SM-T810 z uporabo Tapatalk
Click to expand...
Click to collapse
It's totally different topic about Stratos3 4.2.4.0 firmware bugs.
You should create your own post instead.
mxxt01 said:
Here's an update of my notification issue: after some playing with install/uninstall AmazMod service on the watch + a few reboots, the notifications seems to work now (without AmazMod installed) [emoji16]
Poslano z mojega SM-T810 z uporabo Tapatalk
Click to expand...
Click to collapse
So it was a watch problem.
Really annoying how buggy this watch behave.
My touchscreen stopped working after coming from ultra to smart. The issue is that it does not work even after a reboot or factory reset.
In Ultra mode, still working.
In ultra mode, display is Blank. I try everything to fix. from reinstall official rom, and some official option in developer mode, to external script founded here on XDA. Nothing helps.. i call that a bug
Hello guys,
I just bought a new Amazfit Bip U, but after 2 days, i installed Notify for Amazfit app, and here you can install custom firmware. I saw something to see all emoticons, a font. But after update, my band shows "update failed". One of the worst solutions is to wait for a new official update... Do you know another solutions?
This is on my watch screen
Bibuta1 said:
Hello guys,
I just bought a new Amazfit Bip U, but after 2 days, i installed Notify for Amazfit app, and here you can install custom firmware. I saw something to see all emoticons, a font. But after update, my band shows "update failed". One of the worst solutions is to wait for a new official update... Do you know another solutions?
Click to expand...
Click to collapse
It also happen to me. I connect the watch with phone and change the font from watch setting. And i got it back.
Htet Aung Hlaing said:
It also happen to me. I connect the watch with phone and change the font from watch setting. And i got it back.
Click to expand...
Click to collapse
Can you tell us how you do it? I mean how you connect the watch with phone and change the font from watch setting. It may help other users too. Thanks!
i.muzzafar said:
Can you tell us how you do it? I mean how you connect the watch with phone and change the font from watch setting. It may help other users too. Thanks!
Click to expand...
Click to collapse
Factory reset your Amafit watch and reconnect your watch with the Zepp app from your phone. Then, go to Zepp app>> go to profile tab>> go to your device>> go to watch settings>>system language. Then change to another language. Then it will update your watch and you will get it back
(I got it back by this way. But I am not sure that is the way. Good luck!!)
Htet Aung Hlaing said:
Factory reset your Amafit watch and reconnect your watch with the Zepp app from your phone. Then, go to Zepp app>> go to profile tab>> go to your device>> go to watch settings>>system language. Then change to another language. Then it will update your watch and you will get it back
(I got it back by this way. But I am not sure that is the way. Good luck!!)
Click to expand...
Click to collapse
Thank you so much for the explanation! I will try to follow your method and I hope it will work on my device since Im facing the same problem too.
This method is working. I used it to repair my watch.
Htet Aung Hlaing said:
Factory reset your Amafit watch and reconnect your watch with the Zepp app from your phone. Then, go to Zepp app>> go to profile tab>> go to your device>> go to watch settings>>system language. Then change to another language. Then it will update your watch and you will get it back
(I got it back by this way. But I am not sure that is the way. Good luck!!)
Click to expand...
Click to collapse
Thank you! I almost considered about just buying a new watch from Amazon.