Related
Hi Guys,
I am getting kind of desperate. I keep rebooting into recovery mode. Then, the screen shows Fastboot mode started... udc_start (). I think it is stuck. I am using LG Optimus ONE (P500). I have tried battery pull a lot of times. Doesn't work. Any suggestions? If you suggest I reflash stock rom or something, tell me how please. Thanks.
http://forum.xda-developers.com/showthread.php?t=944881
for flashing original firmwares
If you choose to reflash stock ROM, here is what you need:
- tools: http://forum.xda-developers.com/showthread.php?t=875881
- ROMs: http://forum.xda-developers.com/showthread.php?t=944881 or the link suggested in the tools thread
You may wait a little bit longer before reflashing to see if anybody has a better solution to your problem. Good luck!
More Questions... Help please if you can... Thanks
Hi All,
Thanks to those who have responded so far. I kind of needed the phone fixed ASAP, so I sent it for repair. But anyway, I have a few questions:
1)Is it possible to reflash stock ROM or a new ROM even if the the computer or Android SDK can't detect your device? (This is with the correct driver installed. When my phone was in the fastboot mode screen, it couldn't be detected as an LG Device at all when plugged in.) If you can, how?
2)For those who have successfully gotten a new ROM onto their Optimus One, how did you do it? Is there anywhere where the procedure can be found? And is it relatively safe? (I know there is always a chance you might brick your phone unless you are some expert, but there are some procedures that are safer than others right?)
3)This last question isn't really relevant to this forum section, but I'll ask anyway. Which phone models (any brand, preferably 2.2 onwards) are good for rooting and installing custom ROMs? Like, are there any phones that most rooting/ROM installing software supports? (For instance, I have heard that HTC phones can usually be flashed with custom ROMs without bricking that easily 'cos they are supported by stuff like ROM Manager etc.) And one more thing: what are the easiest/safest ways found to root/flash a new ROM?
Thanks everyone.
-----
Me, the random noob attempting to learn more about Android ROMs and rooting
Jonapedia said:
1)Is it possible to reflash stock ROM or a new ROM even if the the computer or Android SDK can't detect your device? (This is with the correct driver installed. When my phone was in the fastboot mode screen, it couldn't be detected as an LG Device at all when plugged in.) If you can, how?
Click to expand...
Click to collapse
Yes it is possible, you'll need to firstly boot into 'emergency mode', by pressing volume up + back + power when the phone is off. Then follow these steps to flash stock rom. You do not use Android SDK at all, all you need is for the phone to get into the emergency mode, it is what most people with bricked phones do to reflash.
Jonapedia said:
2)For those who have successfully gotten a new ROM onto their Optimus One, how did you do it? Is there anywhere where the procedure can be found? And is it relatively safe? (I know there is always a chance you might brick your phone unless you are some expert, but there are some procedures that are safer than others right?)
Click to expand...
Click to collapse
Personally, it was relatively easy for me even though I'm a new user to android. I've had my phone for 2 weeks and bricked it 3 times within the first 72 hours. But there are methods to get it back as I explained in Q1 XD In order to flash a new ROM, there are 3 MAIN steps.
1. root your phone
2. install custom recovery
3. make backup and flash new ROM
if you need help on certain individual steps, just post it here and I'm sure someone will help you.
Jonapedia said:
3)This last question isn't really relevant to this forum section, but I'll ask anyway. Which phone models (any brand, preferably 2.2 onwards) are good for rooting and installing custom ROMs? Like, are there any phones that most rooting/ROM installing software supports? (For instance, I have heard that HTC phones can usually be flashed with custom ROMs without bricking that easily 'cos they are supported by stuff like ROM Manager etc.) And one more thing: what are the easiest/safest ways found to root/flash a new ROM?
Click to expand...
Click to collapse
In terms of the easiest method to root, it is definitely to simply run an app that can automatically root the phone for you, such as z4root, or SuperOneClick are just 2 examples. So I'll say whichever phones these app support, will be the easiest to root. ROMs will depend on the users of those phones and their dedication to creating customisable ROM. You can find most of the phones and available ROMs on this forum anyway.
Is it possible to exit emergency mode? Do you do a battery pull or something? I am planning to test out booting into emergency mode when my phone comes back from repair. Will it harm my phone? (Does it do stuff like wiping system data or my installed apps?) Thanks in advance to anyone who will reply.
I think you can just hold power to turn your phone off in emergency mode, but if it doesn't work, you can always pull the battery out. You didn't mention what you did for this problem to start but unless you perform the same thing, you won't need to use emergency mode.
Stuck on Recovery mode
Hi Guys. my optimus s went into an emergency mode out of nowhere but i was able to recover using the KDZ Utility. the phone booted up and i did a re start and got stuck on recovery mode even is i use the KDZ Util or install a new rom it goes back to recovery mode . using ra OptS-2,2,1. what can i do if anything. please help.( dont know anything about sdk) Thanks & please help
DaBoricua said:
Hi Guys. my optimus s went into an emergency mode out of nowhere but i was able to recover using the KDZ Utility. the phone booted up and i did a re start and got stuck on recovery mode even is i use the KDZ Util or install a new rom it goes back to recovery mode . using ra OptS-2,2,1. what can i do if anything. please help.( dont know anything about sdk) Thanks & please help
Click to expand...
Click to collapse
when you said install a new rom, did you install it through kdz? if you did, try installing an optimus s rom through recovery. heres how:
download a rom on your computer
plug your phone in to you computer (with it already booted in recovery)
toggle usbms on your phone
transfer the rom to your phone
flash the rom
Phone: LG P500h - ANDROID v 2.2.1 buildnumber FRG83.
Country: Brazil
Anyway, what I know is that i have to downgrade it to 2.2 in order to be able to root. I've looked through a bunch of tutorials on a bunch of websites but there are a few questions i have about the process that isn't answered anywhere i've looked.
Apparently downgrading requires me to get a stock ROM from LG, there is a topic here for that but it does not have the right ROM for my country, i tried a couple codes but they all got me 404.
Can I just flash any standard ROM from, US maybe, will it work?
And if yes, how do I flash it? Apparently you can do that by booting into recovery mode, but to get there you need it to be rooted which I can't do.
I've read about KDZ and downloaded that but... it crashes a lot in my PC (whenever i try the Read Device) it gives me error and closes the program (windows program not responding dialog).
I'm afraid it might crash in the middle of it if i try flashing and that would brick my device.
Is there a simple way to flash a new ROM? Is that the first thing I have to do in order to get a custom ROM say Ubuntdroid? It says I need a new recovery... but for that I need to downgrade first? It's a lot to do... and I don't really get the order in which I should do it all in...
Can somebody post me a little "do this, then do that, then finally do that" so that I can understand it all finally?
Thanks in advance, and sorry for long post, was trying to be as informative as possible.
This shows what happens when I try reading the phone on KDZ... also a little part showing that I got my device to be recognized by windows...
also disabled the LGE modem on device manager, read that if I don't it'll get bricked.
Well it won't let me link the image so... just paste the name together.
www
novasite.com.br
/1.jpg
1. Find a suitable v2.2 stock ROM for flashing (link)
2. Use KDZ to flash it (I am not aware of another tool capable of doing that). Try doing that on a PC running Windows XP (important - that's where you're stuck now and I guess you're using Windows 7).
3. Root your phone - search for "z4root" on Market, install it.
4. Install Custom recovery, which will replace your current (stock) recovery mode (link - you may need to create an account on another forum in order to download).
5. Using Custom recovery you can now install any custom ROM and create nandroid backups to restore your phone to a certain (working) state.
You will have to use KDZ again if you ever want to flash a stock ROM, also losing the custom recovery. But you will have no reason to do that, except if you need to take your phone to some warranty repairs.
Good luck!
NEW PROBLEM: About step 1... i finally found a way to get my country's rom, but... it's.. the same thats on my device right now, it says V10a_02 and thats the same on my phone (the kdz read phone tells me that) so... won't I just be flashing the same 2.2.1 again?
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500H/ABRABK/V10A_02/V10A_02.kdz <---- the rom the topic tells me to get.
How do I know what version of android is in that rom? and if i can't, can you link me to a rom that does?
I found one from another country that the guy said is 2.2... but... will it work if i flash that one? does it HAVE to be for my country? also my model is p500h (the h) is it different from the p500 (different as in flashing p500 without h roms on it will kill it?)
As for flashing it...
I think maybe a computer with win xp will do the trick for kdz.
i've found this post today:
http://forum.xda-developers.com/showthread.php?t=944881
is it better to use that than kdz? theres no replies on topic saying "hey it worked" so i'm a little worried, but apart from a few errors it seems to work on my win 7....
i guess the reply would be "i only know kdz, do it with kdz" but i thought i might ask...
Indeed, I have not tried that method and therefore I can't recommend it. At least KDZ is successfully tested. If you are patient enough to wait for some replies either here or in that topic, you may find out if it works. I would recommend it only if you have no other choice, like if you're unable to try KDZ on an XP machine.
In the mean time, I remembered that a newer version of Custom recovery is available (v1.2) - here. But you still need to download a file and read the tutorial from that other forum I mentioned in the previous post.
what about the first part of the post? i think i might have added that after you replied i don't know... asking about the rom i found if it isn't the same i have on my phone. and asking if i can just add another country's one...
edumazieri said:
Phone: LG P500h - ANDROID v 2.2.1 buildnumber FRG83.
Country: Brazil
Anyway, what I know is that i have to downgrade it to 2.2 in order to be able to root. I've looked through a bunch of tutorials on a bunch of websites but there are a few questions i have about the process that isn't answered anywhere i've looked.
Apparently downgrading requires me to get a stock ROM from LG, there is a topic here for that but it does not have the right ROM for my country, i tried a couple codes but they all got me 404.
Can I just flash any standard ROM from, US maybe, will it work?
And if yes, how do I flash it? Apparently you can do that by booting into recovery mode, but to get there you need it to be rooted which I can't do.
I've read about KDZ and downloaded that but... it crashes a lot in my PC (whenever i try the Read Device) it gives me error and closes the program (windows program not responding dialog).
I'm afraid it might crash in the middle of it if i try flashing and that would brick my device.
Is there a simple way to flash a new ROM? Is that the first thing I have to do in order to get a custom ROM say Ubuntdroid? It says I need a new recovery... but for that I need to downgrade first? It's a lot to do... and I don't really get the order in which I should do it all in...
Can somebody post me a little "do this, then do that, then finally do that" so that I can understand it all finally?
Thanks in advance, and sorry for long post, was trying to be as informative as possible.
Click to expand...
Click to collapse
First backup your data, then download a factory ROM, it doesn't matter which version u download, what matters is the version. Make sure that it's 2.2 and not 2.2.1 or 2.2.2. Follow all the below steps without skippin any, no matter how simple or stupid they are.
Link for shipped ROM - http://forum.xda-developers.com/showthread.php?t=865479
Now download KDZ updater and uncompress it
http://www.4shared.com/file/UleS4dP3/KDZ_FW_UPD_EN.html
Install msxml.msi from the uncompressed directory
Charge your battery to almost full state (I'm not sure, but it can be reason if phone doesn't start)
Turn phone off somehow (remove battery etc.)
Install drivers properly
Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments
Install the LG drivers by selecting the update manager from the lg site
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Press and keep pressed "Volume up"+"Return" and connect USB cable to phone
Yellow screen with text emergency mode should appeared
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT (I have one report that CDMA mod works too)
Select PhoneMode : DIAG (in case of fail try EMERGENCY, and as last chance use CS_EMERGENCY)
I Recommend do not switch phone off. There was some people, which done it and after they was not be able to turn it on again. If flashing failed, just select some another mode and try it again, again, try shake/connect disconnect, again, again....
In KDZ file : Choose the ROM file you downloaded in the first step
Press Launch software update
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Now Root it via Z4root - http://forum.xda-developers.com/showthread.php?t=833953
Then install custom recovery - http://forum.xda-developers.com/showthread.php?t=844483
Then download n flash any ROM of your choice, I wud sugget install Void or LOL.
Edit :- By the time I replied, many have already replied. Anyways you can check my reply too :-D
Mithun.
"it doesn't matter which version u download, what matters is the version."
does that mean it doesn't matter what country or operator the rom is for, as long as it is android version 2.2?
i have one from portugal (not my country) and that one is made for P500 mine is P500H... if that makes a difference i don't know, but i do know that rom is android 2.2. can i flash that one?
i also have one that i got from that topic following the instructions of putting my serial number, it linked me to a rom V10A_02... on KDZ when i try to read my device it says i have V10A_02 too. isn't that the same one i have now? with android 2.2.1? if it is it's very pointless to flash the same rom already in it.
any way to check?
because that is my last doubt ;p
edumazieri said:
"it doesn't matter which version u download, what matters is the version."
does that mean it doesn't matter what country or operator the rom is for, as long as it is android version 2.2?
i have one from portugal (not my country) and that one is made for P500 mine is P500H... if that makes a difference i don't know, but i do know that rom is android 2.2. can i flash that one?
i also have one that i got from that topic following the instructions of putting my serial number, it linked me to a rom V10A_02... on KDZ when i try to read my device it says i have V10A_02 too. isn't that the same one i have now? with android 2.2.1? if it is it's very pointless to flash the same rom already in it.
any way to check?
because that is my last doubt ;p
Click to expand...
Click to collapse
Yes.... you can choose any country. I tried the Australian version. Use the below one http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/AAUSBK/V10a_00/V10A_00.kdz
edumazieri said:
what about the first part of the post? i think i might have added that after you replied i don't know... asking about the rom i found if it isn't the same i have on my phone. and asking if i can just add another country's one...
Click to expand...
Click to collapse
As far as my knowledge goes, the LG P500h you have is the same phone as the P500, only branded for Telus. The hardware should be identical, therefore you may use any ROM designed for the P500 family.
The only thing you may miss if you install a ROM not customized for a Brasil (or South America) network operator is the internet acces point name, thus rendering your phone unable to acces the internet trough its data service connection, but only trough WiFi. Nevertheless, the phone's APN can be configured manually, all you need are the correct settings from your mobile operator and you're good to go.
Ok since you guys told me i can go ahead and flash any country ROM i just did and now my device burst into flames and then the flames consumed my apartment.
ok, not. it worked too well actually, i did the kdz procedure on my win 7 anyway, despite the errors when reading device info, and it took like, 1 minute, rebooted, took like 2 minutes on the android screen then it came back, with all my data still there... i thought it didn't do anything but... its now version 2.2
i tried z4root, worked ... got the superuser app and.... i'm happy ^^ thaaaanks!
anyway about the custom recovery thing..
i'm going to install the one in that post you gave me...
but i read something about the best one being clockwork something...
shouldn't i go ahead and install that one?
or can i do everything i need with this one you guys linked?
edumazieri said:
Ok since you guys told me i can go ahead and flash any country ROM i just did and now my device burst into flames and then the flames consumed my apartment.
ok, not. it worked too well actually, i did the kdz procedure on my win 7 anyway, despite the errors when reading device info, and it took like, 1 minute, rebooted, took like 2 minutes on the android screen then it came back, with all my data still there... i thought it didn't do anything but... its now version 2.2
i tried z4root, worked ... got the superuser app and.... i'm happy ^^ thaaaanks!
anyway about the custom recovery thing..
i'm going to install the one in that post you gave me...
but i read something about the best one being clockwork something...
shouldn't i go ahead and install that one?
or can i do everything i need with this one you guys linked?
Click to expand...
Click to collapse
Glad that it worked Install the Amon_RA's recovery!!! Many ROM's for OO won't support clock work I suppose. Amon RA's recovery is neat, I've been using that from the time I had an HTC tattoo.
For your Custom Recovery.... http://androidforums.com/getitnowma...ry-optimus-one-p500-thunderg.html#post1896517
edumazieri said:
anyway about the custom recovery thing..
i'm going to install the one in that post you gave me...
but i read something about the best one being clockwork something...
shouldn't i go ahead and install that one?
or can i do everything i need with this one you guys linked?
Click to expand...
Click to collapse
You can do anything you need with ThunderG. Now that version 1.2 supports backup and restore of ext4 partitons (a feature you don't need if you don't plan on installing a custom ROM... but you will, eventually ), it is complete.
Moreover, in ClockworkMod's first topic says: "This recovery will not allow you to flash every ZIP file". ThunderG does, if you choose to allow flashing of unsigned zip files. Sometimes this is useful.
Peeeeeerfect
Recovery installed, LOL ROM installed, all fast smooth and error-free.
no more screen touch lag, it's soooooo much faster now, overclocked, i have yet to test my emulators but i can only guess they're gonna be at least 150% better lol.
thank you all very much for taking the time to help me ^^
ONE LAST QUESTION: I PLAN ON BUYING A NEW SD CARD, JUST PLUG IT IN AND IT'LL FORMAT THEN CREATE THE NEEDED FILES THEN I INSTALL STUFF BACK ON IT, SIMPLE AS THAT?
Simple as that =D
Although there are some criteria with the sd card or you'll get unmounting problems.
Use a class 4 or higher card
format with fat32
I've never officially tried this method but its apparently supposed to help
allocation unit size: 64kb when you're formatting
edumazieri said:
Recovery installed, LOL ROM installed, all fast smooth and error-free.
no more screen touch lag, it's soooooo much faster now, overclocked, i have yet to test my emulators but i can only guess they're gonna be at least 150% better lol.
thank you all very much for taking the time to help me ^^
ONE LAST QUESTION: I PLAN ON BUYING A NEW SD CARD, JUST PLUG IT IN AND IT'LL FORMAT THEN CREATE THE NEEDED FILES THEN I INSTALL STUFF BACK ON IT, SIMPLE AS THAT?
Click to expand...
Click to collapse
So, how does it goes?!
I´m brazilian too, got a brand new LG Optimus One from ViVo, and a want to know if you´re having any troubles with conections, calls, internet, 3G etc.
OK, id did the flash
I´m afraid that if flash any custom rom, it will break or cause any misfuncition of the 3g service.
Any idea?!
== Updated
Ok, I´ve flashd it with KDZ and the log show´s thats all ok
"14:34:45 : ===FINISHED=== "
BUt its taking like FOREVER to start... almost 30min on android screen. Is this normal?! Should i restart the phone?!
leave it some more time , try shaking it ...
shake trick sometimes helps
Help please..
I did as instructed in the step to step procedures. kdz posted finished but my phone is still at the yellow screen..i did shaking but nothing happens..Is this normal?..SHould i wait..
Chapter 1: The Foolishness of the User
Hi, I have the korean version of the optimus one(KU3700). It was on gingerbread(2.3.4) stock. I was trying to root it by downgrading it. I entered "adb reboot recovery" and I'm stuck. I tried to reflash it by going to emergency mode with the button combinations using the KDZ updater with this
"csmg. lgmobile. com:9002/swdata/WEBSW/LGKU3700/AKTFBK/KU370040_00/KU370040_00.kdz"
and it worked without any errors but when it when it came up it was still on recovery mode. Is there any way I can change the phone mode to the regular mode
Chapter 2: Journey to Salvation
For anyone who has this korean optimus one, after days of searching, I've found a web site that gave me hints to solve the problem. I just needed a different kdz file and I got it here:
h t t p://sirospace.tistory.com/category/Android%E2%97%86
popped it in google translate because I'm Filipino and can't read korean.
Downloaded the froyo kdz and flashed. I hope this can help other people stupid enough to play with their phones by typing random commands without knowing what it does, like me, LOL...so happy, now it's time to root
Chapter 3: False Hope
OK so I have successfully unbricked and rooted my KU3700, now The problem I have is installing a custom recovery on this phone, none of the images I try work.
Recovery images I have tried are as follows:
recovery-RA-GNM-thunderg-1.1.0.img
recovery-RA-GNM-thunderg-2.2.1.img
recovery-RA-GNM-thunderg-3.0.6.img
Every time it finishes and reboots, it gets stuck at the LG logo.
Chapter 4: Wisdom Within
Found the problem. The images above are for the P500.Even if the KU3700 hardware is similar to the P500, flashing firmwares made for the other model will result in errors. The same holds true for custom recoveries.
Chapter 5: The Plea to the Gods
I've contacted drellisdee and submitted the files needed for custom recovery creation for the KU3700.
Just waiting for the flash image now. Thank you everyone
Chapter 6: The Forgotten
It seems drellisdee is busy right now. I'm a windows user and knows nothing about programing. So if anybody can help I'm sure the KU3700 community would be greatful. I've attached the files I think are needed to make a custom recovery.
Chapter 7: Quest for the Custom Recovery
I got tired of waiting. So as a windows user with no experience in programming, I did a lot of copying and pasting, I managed to port clockwork mod using virtualbox following this website:
h t t p://www.koushikdutta.com/2010/10/porting-clockwork-recovery-to-new.html
So I have got a bootable and flashable custom recovery but nothing works yet. I still need to configure it according to the device.
I have uploaded the image and the build files. Please help me configure it and tell me what's wrong. I really don't know that I'm doing
PS: you can try flashing the custom recovery by doing "fastboot flash recovery /Path to/recovery.img and you can go to recovery by using android terminal and type "boot recovery". It will boot, but that's that LOL. Take out the battery to boot to normal mode.
Chapter 8: The Holy Grail
LOL, I found the answer again. I was so frustrated that I kept squishing the phone in recovery and found out that it was just a button configuration problem. A bit of research and I found out that I can toggle it by pressing volume up and volume down at the same time. WOOHOO!!! Custom Recovery at last
Chapter 9: Invasion of the ROMS
And here at last, the user is retired. But the adventure is far from over. It is foretold that the creation of the Custom Recovery will begin a new era. The key to open the gate has been found. So our hero will await the invasion of the ROMS<background music...> END
you can see at
tinhte.vn/threads/908874
Thank you for the reply but as I said, I can flash fine without errors it's getting back to regular mode I have a problem with. Rebooting and reflashing does not take me out of the recovery screen(it's just a opened box with an orange arrow and the android logo).
vidgen13 said:
Thank you for the reply but as I said, I can flash fine without errors it's getting back to regular mode I have a problem with. Rebooting and reflashing does not take me out of the recovery screen(it's just a opened box with an orange arrow and the android logo).
Click to expand...
Click to collapse
yes i see.but i'm newer android.i only send you link to fix
i hope have a pro android to fix your brick
This is just a shot in the dark because i didn't understand what you did entirely : have you used the combination to actually recover the stock rom after you flashed with KDZ ? (Home+VolDown+Power)
Yes already did. The computer can see the phone whenever I connect it except that I can't access adb. I may have to take this back to the store
vidgen13 said:
Yes already did. The computer can see the phone whenever I connect it except that I can't access adb. I may have to take this back to the store
Click to expand...
Click to collapse
Are you sure you flashed the right rom for your phone? There's an application that downloads the required rom for your phone according to your IMEI/SN, but i don't know if it works with the korean version.
Yes it's the KDZ file, unfortunately it's the only KDZ file out there for ku3700. Shouldn't have settled for this korean version
why you wanna downgrade the latest version?
Dude I have the same Korean edition as you.
Actually why you wanna downgrade the latest version.?
My phone had 2.2.2 and I did upgrade it into 2.3.4 I did it officially and I can tell you How to re-install 2.3.4 if you want.
asmOne said:
Dude I have the same Korean edition as you.
Actually why you wanna downgrade the latest version.?
My phone had 2.2.2 and I did upgrade it into 2.3.4 I did it officially and I can tell you How to re-install 2.3.4 if you want.
Click to expand...
Click to collapse
Thanks for the reply. I wanted to downgrade it to root it. And now I'm rooted. My only problem now is installing a custom recovery. I've already tried several custom recoveries:
recovery-RA-GNM-thunderg-1.1.0.img
recovery-RA-GNM-thunderg-2.2.1.img
recovery-RA-GNM-thunderg-3.0.6.img
but I get stuck at the LG logo when it reboots. I think it's because it's for the p500. So if you have a custom recovery for the ku3700 please help
I dont get it ,p504,p505,p506 are versions of p500??? And why some of our roms work on those phones?? So by logic this stock work on p500???
Sent from my LG-P500 using XDA Premium App
vidgen13 said:
Thanks for the reply. I wanted to downgrade it to root it. And now I'm rooted. My only problem now is installing a custom recovery. I've already tried several custom recoveries:
recovery-RA-GNM-thunderg-1.1.0.img
recovery-RA-GNM-thunderg-2.2.1.img
recovery-RA-GNM-thunderg-3.0.6.img
but I get stuck at the LG logo when it reboots. I think it's because it's for the p500. So if you have a custom recovery for the ku3700 please help
Click to expand...
Click to collapse
this method worked for my working KU3700 when I'm using my 1st KU3700 I also was struck as you and finely I realized there are No custom roms for Optimus one Korean edition (KU3700/SU370) and I had to connect my phone to an Octopus box (lg softwere box) via software box installed the official firmware. if this method not working you have to connect to a software box.
connect to the internet your PC and 1st install Driver and 2nd install the LG update tool. after installation connect your phone to computer and wait a five seconds for comport installation. after install your phone Run LG Update application.
it is connect to the server automatically indicating red line and after search for latest firmware.
if you can Update your phone it is shows Update butten.
Driver
http://www.4shared.com/file/C3BSNx9P/lgunitedmobiledriver_s4981man3.html
LG Update Tool
http://www.softpedia.com/get/Mobile-Phone-Tools/Others/LGMobile-Support-Tool.shtml
Thank you all for the quick answers, but I already have a rooted ku3700. All I need now is a working custom recovery. If someone has the same phone, please tell me which image is compatible
you can appear the emergency mood with android logo.
it means you have an Empty phone. your Os was been erased. You have to connect your phone to Octopus software box and box server has you original Os for your IMEI. this is the only solution. if you will able to solve this problem without a Software box please inform me. we can open a New Thread for Korean edition.
(ku3700/su370)
I already got out of the emergency mode without an octobus box. It's really simple, you just need to use a different kdz file. The hard part was looking for the kdz file. I have 3 kdz files. KU370017(froyo), KU370033(gingerbread-rootable), KU370040(latest one from LG, gingerbread-unable to root). Just flash with the KDZ updater. I'm on the second firmware because I can't root the latest firmware. To root it, I used super one click(latest version, use zerg rush option). Now I'm just waiting for a custom recovery from drellisdee so I can use custom roms. When I get it, I'll ask him if I can post it so we all can have uber phones LOL
Updated the thread. Can somebody help?
vidgen13 said:
Updated the thread. Can somebody help?
Click to expand...
Click to collapse
If you have flashed a working clockworkmod you can enter into clockworkmod via ROMManager (search in google play aka market). In ROMManager you have "reboot to recovery" option in case you want to go to recovery to flash something. Also you can try to flash from ROMManager a custom recovery (5.0.2.0 for oldBB or 5.0.2.7 for newBB), try to choose to phone model LGP500 oldBB, try and test if it's working. Wish you luck.
Thanks but I already have a working recovery. I just need some ROM makers now
vidgen13 said:
Thanks but I already have a working recovery. I just need some ROM makers now
Click to expand...
Click to collapse
Have you tried CM7.2? if your phone is very similar with Optimus One i doubt it isn't compatible with your phone.
If your phone use 2.6.35.10 or 2.6.35.14 kernel you can give a shot to try CM7.2 on your phone, but before try this make a backup first.
Check this thread Post Your CyanogenMod 7.2.0-RC1 Nightly Questions HERE!! for CM7 custom rom.
yep, it doesn't work. Is there a tutorial for building cyanogen for unsupported devices? All I can find are tutorials for supported devices. I've already got the source code from LG. The problem is just incorporating it in the cyanogen mod. I wish this phone had more users LOL
Hey guys so I've been killing myself just trying to find ways to get my newly rooted xperia z2 phone to boot into recovery mode.
Essentially I followed this guide to the bone and successfully rooted my phone --> http://forum.xda-developers.com/xperia-z2/development/stock-d6502-23-1-0-726-complete-guide-t3085893
The big problem is whatever I do, no matter the selection of recovery apps(quickboot, twrp manager, etc.) I install I can never get back into recovery mode, my phone turns off and goes into normal bootup, even when I try to do manual recovery mode the light indicator on top doesn't show up and the phone ends up starting normally.
I have factory resetted my phone a couple of times to have a fresh start each time I try something new but nothing seems to work.
On top of that SDFix and it's other variants does not work on my phone, so I can't install any apps on my micro sdcard. I'm really at a loss for what to do here(been at it for 3 days now) so I'm seeking help.
I'm not sure what information to give but I'll try to give as much details as I can about my situation, I'm really desperate to have recovery and my sd card working normally as I am currently very limited with the stuff I want to do on my phone. :crying::crying:
Info:
Model Number: D6503
Android Version: 5.0.2
Kernel Version: 3.4.0-perf-g72984dd [email protected] #1
Build Number: 23.1.A.0.726
SuperSU Installed
Phone is factory reset and rooted.
No other mods & apps installed aside from pre-installed apps and SuperSU
I would very much appreciate it if someone can help me with this problem, thank you!! :cyclops::laugh:
I can't access recovery mode either. Led light doesn't come on when I turn on the phone as well.
I was thinking abt rooting my phone but nvm now.
saedted said:
I can't access recovery mode either. Led light doesn't come on when I turn on the phone as well.
I was thinking abt rooting my phone but nvm now.
Click to expand...
Click to collapse
I think it doesn't matter whether your phone is rooted or not for you to be able to access recovery mode(not sure about this to be honest). I know rooting(and all this headache) is worth it for any android phone especially the xperia z2 which is why I'm hellbent on getting this fixed.
I wanna install cyanogen mod but those two things I've mentioned in my first post is really limiting what I can do with this phone sadly.
disenx34 said:
I think it doesn't matter whether your phone is rooted or not for you to be able to access recovery mode(not sure about this to be honest). I know rooting(and all this headache) is worth it for any android phone especially the xperia z2 which is why I'm hellbent on getting this fixed.
I wanna install cyanogen mod but those two things I've mentioned in my first post is really limiting what I can do with this phone sadly.
Click to expand...
Click to collapse
Sony devices don't have recovery partition, either unlock your BL (and lose DRM keys) and flash a kernel with a built-in recovery , or keep your BL locked and install nut's dual recovery (you need a rooted system before installing).
All the info needed for both options is here on xda but i think you guys need to read a lot more before you start messing with your devices....
ptmaniac said:
Sony devices don't have recovery partition, either unlock your BL (and lose DRM keys) and flash a kernel with a built-in recovery , or keep your BL locked and install nut's dual recovery (you need a rooted system before installing).
All the info needed for both options is here on xda but i think you guys need to read a lot more before you start messing with your devices....
Click to expand...
Click to collapse
I already did everything I possibly could think of (i.e. unlocked bootloader through sony website, rooted, etc.) like I mentioned in the OP, I actually just recently discovered(like 15 minutes ago) that apparently there's this thing called Sony RIC and that's what's disabling me from installing anything on the system and limiting what I can do with my phone because everything(sd card + system folders) are read only and not write-able.
I found out from this thread (http://forum.xda-developers.com/xperia-z2/general/4-4-4-sony-ric-killer-t2953141/page3) that there's no updated version of 'Sony RIC KILLER' for lollipop version 5.0.2. so I guess I'm stuck. I tried installing TWRP recovery through TWRP manager on my phone and it wouldn't even get to the recovery mode.
I'm gonna keep trying other variants of dual recoveries till one successfully works, I'll also try your suggestion of flashing a kernel with a built-in recovery that's one area I haven't dabbled in yet, this is my first android device so I'm still figuring out where the red line is on everything. :laugh::good:
disenx34 said:
I already did everything I possibly could think of (i.e. unlocked bootloader through sony website, rooted, etc.) like I mentioned in the OP, I actually just recently discovered(like 15 minutes ago) that apparently there's this thing called Sony RIC and that's what's disabling me from installing anything on the system and limiting what I can do with my phone because everything(sd card + system folders) are read only and not write-able.
I found out from this thread (http://forum.xda-developers.com/xperia-z2/general/4-4-4-sony-ric-killer-t2953141/page3) that there's no updated version of 'Sony RIC KILLER' for lollipop version 5.0.2. so I guess I'm stuck. I tried installing TWRP recovery through TWRP manager on my phone and it wouldn't even get to the recovery mode.
I'm gonna keep trying other variants of dual recoveries till one successfully works, I'll also try your suggestion of flashing a kernel with a built-in recovery that's one area I haven't dabbled in yet, this is my first android device so I'm still figuring out where the red line is on everything. :laugh::good:
Click to expand...
Click to collapse
On stock rom / kernel only nut's dual recovery will work. IT will also disable sony ric for you in the process. check here: http://forum.xda-developers.com/showthread.php?t=2261606
On custom kernel you have to choose a kernel with the recovery you want and flash that (don't forget to unlock BL before or you'll end up with softbrick). Recovery managers won't work as there is no recovery partition on your device...
install latest version of nuts recovery for z2 and install it after finish phone well reboot into recovery
Then dont update busybox it well break recovery
Hey guys,
actually I've a few problems and I really would appreciate if someone could help me.
So first here are my problems:
If I boot my phone, I can't turn WiFi on
I can't boot into TWRP, I always get into the EMUI Recovery Mode
I want to reinstall my phone completely new but I can't find any file and my Recovery is broken
-- edit --
[Information]
I wanted to install Cyanogenmod but I don't liked it so I wanted to reset my phone, but my Recovery was broken.
I had no OS installed and installed a Stock Firmware from the board but this firmware is broken and I can't activate WiFi.
---
Thank you all!
Camirlot said:
Hey guys,
actually I've a few problems and I really would appreciate if someone could help me.
So first here are my problems:
If I boot my phone, I can't turn WiFi on
I can't boot into TWRP, I always get into the EMUI Recovery Mode
I want to reinstall my phone completely new but I can't find any file and my Recovery is broken
-- edit --
[Information]
I wanted to install Cyanogenmod but I don't liked it so I wanted to reset my phone, but my Recovery was broken.
I had no OS installed and installed a Stock Firmware from the board but this firmware is broken and I can't activate WiFi.
---
Thank you all!
Click to expand...
Click to collapse
sorry but you don't give any useful information. their are many versions of the 5x, first I need you phone model
clsA said:
sorry but you don't give any useful information. their are many versions of the 5x, first I need you phone model
Click to expand...
Click to collapse
Oh sorry, forgot that.
I've a KIW-L21 and I'm from Germany.
I think my whole firmware is broken bc I also can't click on Security in my Settings.
I would like to reinstall my phone but I cant access TWRP and dont find a good backup
Camirlot said:
Oh sorry, forgot that.
I've a KIW-L21 and I'm from Germany.
I think my whole firmware is broken bc I also can't click on Security in my Settings.
I would like to reinstall my phone but I cant access TWRP and dont find a good backup
Click to expand...
Click to collapse
use this >> http://www.hihonor.com/nl/support/details/?DOC_ID=84203
If you have modified your device, are still on Lollipop and you'd like to revert your UK device back to complete stock, then you can use this package.
Download the zip, extract and put on a microSD (preversing the dload/UPDATE.APP structure).
Turn off your device, plug it into a charger (but not a computer) then, with the microSD inserted, tap the power button while holding volume up and volume down. The update will apply and you will be back to bone stock B140. Your device WILL be wiped.