Related
Hi everyone,
I searched the forums to see if anyone else was having bluetooth reception and range issues but came up short.
I'm having problems keeping my Plantronics Voyager Pro + headset connected to the phone. I usually have to have it within 3 feet of the phone, or I get a lot of static or BT disconnects completely. What's weird is I am able to stay connected up to 20 feet away with my Jabra bluetooth speaker. I recently bought a hard plastic case for the phone which made the problem a little worse, but not too much (5 feet range vs 3 or 4).
Anyone else having this issue? I just bought the phone on 12/17 and I think I have 30 days to exchange or return. Are there any fixes out there that have worked for anyone?
Thanks in advance for any comments or suggestions!
*** Update: I just re-paired my Voyager Pro + headset with my old HTC HD2 and was able to walk about 25 feet away from the phone (two walls in between) and had no static or disconnects. Must be the Amaze. ***
I've been using the Motorola S305, and I can be two rooms away, and still get good reception from the phone, so long as doors are open. Like every bluetooth headset I've used, getting my body between the phone and the headset is a problem (phone needs to be in a pocket on the same side of my body as the headset BT receiver). The quality of the bluetooth on this phone seems to be superior to that of my old N1. No complaints.
Thanks Dave. Are Bluetooth issues such as these hardware or software issues?
Get new earphones.
Sent from my HTC Amaze 4G using xda premium
I called T-Mobile and they said the bluetooth connectivity/range problem is a known issue for the Amaze 4G. HTC is currently working on a solution that will likely be resolved on the next software update.
Off I go to buy a set of wired earphones until they release it.
Curious--I wonder why I'm having no difficulties, then. I've connected the Amaze to my N1, the amaze to my ASUS Transformer, and the Amaze to my S305 headset, all with no problems.
Not all the profiles I'd like to see supported necessarily are (Can't get DUN to work), but I'm puzzled that there's apparently some problem.
It's interesting that your Voyager worked so well with the HD2.
On the Tmobile forums, there's certainly discussion:
http://support.t-mobile.com/thread/10520
So far I have talked on BT with no issues. I set the phone on my desk and I walk around my room without issues, distance is no more than 10 feet, but works without issues.
Get the latest updates for you phone. Delete the pairing with your Bluetooth then pair again. I have a Jawbone Era and my reception was horrible. My reception is much better now after updating and pairing again, although I still have a long delay between phone and Bluetooth.
Only issue I have is delay when making call. Recieving the call is fine
Sent from my HTC_Amaze_4G using xda premium
I have a hard time connecting to my car's bluetooth. I have to play around with the settings until it links up but that's such a hassle. Also, I noticed that after turning bluetooth on, I would sometimes lose signal. Weird..
Hey everyone,
Has anyone noticed bluetooth issues? I've pointed them out in other threads, but they seem to be glossed over. I hate to seem like a noob by creating new threads, but I fear that the issue is being looked over by most people. I've read a few reports of people having issues with their phones connecting to their cars or headsets automatically. Has anyone else faced these issues?
I specifically cannot get my BT headset to connect unless I unpair and repair it everytime I want to use it. Sometimes even during a phone call the headset will drop connection and wont reconnect unless i turn it off and on a few times. For reference, I've tried multiple BT headsets and they all behave the same way. These headset's also work just fine with my Galaxy S2, just not with my S3 (international on XLE8)
No problems with bluetooth here and I use it a lot (HS3000, Logitech Boombox, PS3 and Wii controllers too).
No issues here. Phone sometimes doesn't pair automatically with the BT kit in my work car, but I've had that issue with my S1 and S2 in the same car so I'd say it's a problem with the headunit.
Works perfectly with the Sony headunit in my own car, and connects to my mate's fine.
ok, what firmware rev are you guys running? im going nuts not being able to use bluetooth here!!
somewhat related.
i often leave my sgs3 connected to my laptop via usb when i fall asleep. at morning, battery's charged 100% obviously and phone isn't hot.
last time around, i was listening to music via hm3700 bluetooth headset. then later turned off the bluetooth headset. i forgot to turn off the bluetooth on sgs3 and again fell asleep while it's still connected via usb to laptop.
when i woke up at morning as usual battery's charged 100% but the sgs3 was hot, not so hot but isn't anywhere the normal hot we're accustomed to.
connects automatically to my car's BT built-in system. Only needed to pair once.
Works very well with my Sennheiser PXC 310 BT.
If I switch on the headphones the phone automatically connects to it.
can everyone please detail their firmware/kernel they are using?
i am on XXALE8, with the stock kernel
I have problems on XXLE8 as well connect it to my car head unit and it acrually crashes the headunit after 5 mins being connected . After the heaf unit crashes 3 times it requires a pin code. Iphone 4, 4s and gs2 connect no issues.
Sent from my GT-I9300 using Tapatalk
bean12147 said:
I have problems on XXLE8 as well connect it to my car head unit and it acrually crashes the headunit after 5 mins being connected . After the heaf unit crashes 3 times it requires a pin code. Iphone 4, 4s and gs2 connect no issues.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
thanks for your input, i upgraded to XALF5 and still having the same issues. this is frustrating!!!!
Oddly - my phone will automatically connect to my cars in-built BT system, but it won't auto connect to my Jawbone Era without switching BT of and back on....
I also have problems, with my build-in bt in my car. Have XXBLH3. Connect fine, but drop the connection 2-3min after. My SGSII have no problems
No Ringtone through Bluetooth
Okay here is my problem……I want my custom ringtones i have set for contact to play in my Bluetooth headset when a receive a call, not that dumb ring. That way I will know if I want to take the call or not because I can tell by the ringtone who is calling. Why would Samsung disable this feature. my iPhone 4s plays the ringtone I have setup when I get a call. Is there anyway to do this. I ride a motorcycle and I have a device called a Chatterbox that let’s me connect via Bluetooth to my phone so I can hear my music and talk and make calls while I am riding. On my iPhone 4s my music would pause my custom ringtone would play and I could decide it I wanted to take the call or send it to voicemail, then my music would start right back up from where it left off. Right now my Galaxy i717 and my Galaxy i747 (Note and S III) just play this annoying ring and I can’t tell who it is! Any have a fix or work around for this.
Hmmm, the sound on my cars bluetooth gets distorted and only a reconnect will fix, and more worringly sometimes the S3 will not wake up after disconnecting from my car and only a hard reset will solve it.
My S2 did pretty much the same thing.
I have Jaybird Freedom Sprint Bluetooth headsets that I use to workout with. I tried pairing with them on my Omate. It will pair but the sound still comes out of the speaker on the watch. Is there something I can do to fix that as the headset works great. Thanks for any help!
I have have a pair of Jaybirds, and mine did the same thing. What worked was the Omate ran out of juice and after recharging and Turing back on it has worked perfectly every since. You may also need to to set the Jaybirds as default for miix and phone calls under Bluetooth settings.
Sent from my iPhone using Tapatalk
Where the heck are the bluetooth settings, not quite in your face if you know what I mean.
Yeah, so I don't see in the watch where those Bluetooth settings are to set the Jaybird up as default. Maybe you can help guide me to where that is. Not sure if it matters but it is stock. I also drained the battery but it didn't do anything. If you have a speific process maybe you could lay it out for me and see what happens. Thanks again for the help!
Go to settings. Then wireless and networks. Then Bluetooth. Select Jaybird make sure phone and media audio are selected.
Sent from my iPad using Tapatalk
I found the options and it was set as you stated above. Still didn't connect. But, I did a hard reset and tried again and it wored fine, now the issue is that when I turn the headsets on they should connect to the watch but doesnt automatically and I have to re-pair each time.
Glad you got it to work. Not sure why you have to repair each time.
Sent from my iPad using Tapatalk
I have a bluetooth problem too. My 1/8 2100 (stock firmware) Truesmart pairs with my LogiLink BT0026 headset but i can play music only within a distance of about 10cm. It disconnects on a higher range. Same with the connection to my PC. The headset connects normally to my other devices. Any ideas???
gabbadoo said:
I have a bluetooth problem too. My 1/8 2100 (stock firmware) Truesmart pairs with my LogiLink BT0026 headset but i can play music only within a distance of about 10cm. It disconnects on a higher range. Same with the connection to my PC. The headset connects normally to my other devices. Any ideas???
Click to expand...
Click to collapse
I have the earlier 1/8 US firmware. I use the Altec Lansing Backbeat 903 Bluetooth(Also sold as Plantronics under same model name and number) headset that I picked up from a garage sale today. Great Bluetooth stereo sound! I absolutely get no sound cuts when worn on my wrist(Which is 2ft away when arm extended) no matter how I move my arms. Have you tried disabling the quickboot feature in Settings >> System >> Accessibility? That feature is causing problems with wifi and bluetooth due to the firmware from what I've been told before.
Thx for your reply! :good:
I tried disabling the quickboot feature and also flashed Loki's EnSec-firmware, but the problem is still the same. :crying:
I have come to the conclusion that we can't always blame the truesmart with the bluetooth issues. I have a bluetooth audio receiver plugged into my hifi system but I can only stream to it in very close contact i.e. about 10cm maxiumum. However same setup on watch connected to my August EP60 headphones (which are amazing btw) yielded very different results. After connectin established I started music streaming and took off my watch and leaving it downstairs went for a walk round my house including upstairs. No loss of connection with several meters distance and no dropouts at all. Happy because I bought the August EP60's specifically to use with Truesmart.
:good:
Hi,
I'm listening to music from my TS through my bluetooth earphones right now... apart from the occasional split second stutter, I'm very impressed.... I can see how this would be a killer device for the gym or joggers etc, I'm so impressed im going to try and find a smaller pair than my backbeats!
movieifx said:
I have come to the conclusion that we can't always blame the truesmart with the bluetooth issues. I have a bluetooth audio receiver plugged into my hifi system but I can only stream to it in very close contact i.e. about 10cm maxiumum. However same setup on watch connected to my August EP60 headphones (which are amazing btw) yielded very different results. After connectin established I started music streaming and took off my watch and leaving it downstairs went for a walk round my house including upstairs. No loss of connection with several meters distance and no dropouts at all. Happy because I bought the August EP60's specifically to use with Truesmart.
:good:
Click to expand...
Click to collapse
Good to hear this, so i still have hope.
What's about your WiFi connection... my maximum range is 3 to 5 meters away from the router (same room, no walls between).
With my stock TrueSmart I get Bluetooth solid from 3 rooms, 32 ft min before blittiness starts. WiFi is even farther.
Sent from my Nexus 5 using Tapatalk
Bluetooth and WiFi range problem solved!
My problem is finally solved.! I removed the pin of the wristband in which the antenna is located and found that both black wires were scratched. I isolated them with a small peace of tape and now it works great for me.
gabbadoo said:
My problem is finally solved.! I removed the pin of the wristband in which the antenna is located and found that both black wires were scratched. I isolated them with a small peace of tape and now it works great for me.
Click to expand...
Click to collapse
Just took mine apart for the second time and found the same connector lose again, hopefully sorted properly this time. How did you get the wristband pins out, mine don't seem to have screw heads.
I hope I'm posting this in the right sub-forum, since I think this is not a device-specific problem.
So, I recently bought a Parrot AR.Drone 2.0 and as you probably know, the Drone can be controlled via an Android App (https://play.google.com/store/apps/details?id=com.parrot.freeflight). First I simply tried the app with the default touch controls, but it was not precise enough and I missed the tactile feedback. Then I had the idea of connecting my PS3 controller with the Sixaxis app (https://play.google.com/store/apps/details?id=com.dancingpixelstudios.sixaxiscontroller) to my phone (Moto G 2nd Gen., 2014, Dual SIM variant) and controlling the Drone with that. And here comes my problem:
If I have only Wifi enabled on my phone I can fly about 25-30m with the Drone
If I enable Bluetooth (to use the PS3 controller) and Wifi the distance drops to about 10m and I get a lot of connectivity issues to the drone.
I also tried my ASUS Transformer Prime (TF201), that's even worse. As soon as I turn on Bluetooth the Wifi signal drops to almost nothing.
I have found others with similar problems (for example: http://android.stackexchange.com/qu...wifi-reception-severely-affected-by-bluetooth or here: http://forums.androidcentral.com/sa...-samsung-galaxy-tab-s-10-5-wifi-problems.html).
Can anybody explain why the Wifi quality drops (massively) when Bluetooth is turned on?
I was experimenting a little more this weekend and the issue is definitely there. I was outside of the city, where there was no other Wifi or anything. Looked at the networks with Wifi Analyzer before and after turning Bluetooth on. Without BT all channels had max. rating, with BT on they all dropped to 1-2 stars...
Hi folks,
I've seen a few comments on bluetooth on this phone but not this specific one. I have a Kia Optima with bluetooth and when I get in the car I expect my M20P to auto connect to the head unit. It seems very temperamental though, often not connecting at all. Other times it will connect and then randomly drop connection and reconnect. Has anyone else had this or know what might be causing it?
I'm currently testing if it only connects when I wake / screen on / unlock the device which it seemed to do on my commute this morning, but then a second time it still didn't connect doing the same thing.
I'm also checking with Kia if there is a software update for the head unit but i'm expecting them to blame the phone and Huawei to blame the head unit.
Any help appreciated.
Hi, I am experiencing something very similar. Very bad audio quality during calls, and temperamental connections with Bluetooth - disconnecting and re-connecting.
I haven't been able to find any solution, hoping to awaken this forum.
Same issue here - On 9.0.0.187
Volkswagen Golf 7 2016
Voice sounds like its lagging and like metallic treble
Also i notice with Spotify will streaming music that the display unit is out of sync with what i am listening
It shows the title of the previous song that i have listen not the current one
Did you ever figure this out?
My girlfriend just reported to me that her new 6T is not automatically connecting to her car like her old Android did. It's paired, but she gas to manually connect.
I have audio speeding up and slowing down on my Skoda Citigo bluetooth with Mate 20 Pro, its slightly better than my Galaxy S8 which used to continually drop connection.
9.0.0.266, Very flakey Bluetooth since this update applied. Used to be fine before this, now i get random disconnects from my Galaxy Watch,, by VW headunit in the car, and random drops of audio from my Freebuds 2 Pro.
Starting to get rather annoying