Hi,
i had a problem with bluetooth connection on my smartwatch Amazfit and I did a Factory Reset but when i tried to pair my watch because i unpaired the device so when i tried to scan QR code it says Cannot pair Amazfit Watch please go to Chinese mainland app store to download ... app to repair. So i downloaded you developer app and it didnt connect again because error appeared "please make sure your phone is nearby to the phone". Phone is near so what the..? I tried to: reinstall app from Play Store and yours Developer app, tried to hard reset, change language on mobile everything what was available at the internet. Can someone please help?
E: I forgot, i have installed the latest PACEfied ROM.
-Thanks, Steve.
This (eventually) worked for me - MUST make in bluetooth devices on phone FORGET THIS DEVICE . Only then start the app for pairing on phone!
Also had the same problem
Ftefan69 said:
Hi,
i had a problem with bluetooth connection on my smartwatch Amazfit and I did a Factory Reset but when i tried to pair my watch because i unpaired the device so when i tried to scan QR code it says Cannot pair Amazfit Watch please go to Chinese mainland app store to download ... app to repair. So i downloaded you developer app and it didnt connect again because error appeared "please make sure your phone is nearby to the phone". Phone is near so what the..? I tried to: reinstall app from Play Store and yours Developer app, tried to hard reset, change language on mobile everything what was available at the internet. Can someone please help?
E: I forgot, i have installed the latest PACEfied ROM.
-Thanks, Steve.
Click to expand...
Click to collapse
I also had this problem, and now the smartwatch is completely useless. After I updated my Pixel XL to Android 8.1, the sync problems started. I tried to make a reset (unpair, do a factory reset and try to pair again), but now I'm stucked on the QR Code screen. I read it with the Amazfit App, but when it tries to sync the previous information with the smartwatch, it gives me generic sync error. I also tried to skip the sync old information part, without success.
bicicletero said:
I also had this problem, and now the smartwatch is completely useless. After I updated my Pixel XL to Android 8.1, the sync problems started. I tried to make a reset (unpair, do a factory reset and try to pair again), but now I'm stucked on the QR Code screen. I read it with the Amazfit App, but when it tries to sync the previous information with the smartwatch, it gives me generic sync error. I also tried to skip the sync old information part, without success.
Click to expand...
Click to collapse
I have the same problem with my Nexus 6P updated to android 8.1.
Any idea?
gftrotta said:
I have the same problem with my Nexus 6P updated to android 8.1.
Any idea?
Click to expand...
Click to collapse
same problem. i tried everything. factory reset the phone, forget device on bluetooth. and still not working
hope someone would be able to fix it
Amazfit app was updated 15 hours ago on app store. Maybe is this the cause of this problem... i dont know
Hi, I just tried with updated version and is not working with Pixel XL and android 8.1
I had this problem with App 2.0.0 and PACEficator, had to find a original firmware on 1.3.0n, update do 1.3.5 and then everything works fine. Didn't flashed any other rom yet and things are good, so you guys might wanna do this. I got the rom from https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unbrick-huami-amazfit-t3547300
pocotoh said:
I had this problem with App 2.0.0 and PACEficator, had to find a original firmware on 1.3.0n, update do 1.3.5 and then everything works fine. Didn't flashed any other rom yet and things are good, so you guys might wanna do this. I got the rom from https://forum.xda-developers.com/smartwatch/amazfit/tutorial-unbrick-huami-amazfit-t3547300
Click to expand...
Click to collapse
Hi are you running Android 8.1? I cannot get the app (2.0.0) to work. I created an account at xiaomi and allowed the acces to this account in the app. But it leeps throwing "data sync error, pleae try later" error messages.
Any help would be very appreciated
secondplayr said:
Hi are you running Android 8.1? I cannot get the app (2.0.0) to work. I created an account at xiaomi and allowed the acces to this account in the app. But it leeps throwing "data sync error, pleae try later" error messages.
Any help would be very appreciated
Click to expand...
Click to collapse
Use this one https://www.apkmirror.com/apk/huami...azfit-watch-1-7-4-4-dev-android-apk-download/
Sign in to your mi account and then install the 2.0 app.
Sent from my HTC 10 using Tapatalk
cyrusct82 said:
Use this one
Sign in to your mi account and then install the 2.0 app.
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
Thanks, signing into the 2.0.0 version worked now. But I still get the pairing errors after scanning the QR Code and accepting the bluetooth pairing request. It takes like ten seconds to do something, then it throws the error
I've just bought amazfit and had the same problem..... couldn't pair watch with my nexus 5x running android 8.1.
I tried older device with android 7.1 and it worked, then updated firmware in my watch and now it's working also with android 8.1
Sparrow318 said:
I've just bought amazfit and had the same problem..... couldn't pair watch with my nexus 5x running android 8.1.
I tried older device with android 7.1 and it worked, then updated firmware in my watch and now it's working also with android 8.1
Click to expand...
Click to collapse
What firmware version do you have?
Thank you
Sent from my Pixel XL using Tapatalk
How did you get that to work? I tried connecting it to another phone and then going back to my 6p, 8.1 and got nothing again.
---------- Post added at 12:28 AM ---------- Previous post was at 12:25 AM ----------
Sparrow318 said:
I've just bought amazfit and had the same problem..... couldn't pair watch with my nexus 5x running android 8.1.
I tried older device with android 7.1 and it worked, then updated firmware in my watch and now it's working also with android 8.1
Click to expand...
Click to collapse
When I tried this it told me that the watch was already up to date and couldn't be updated... How did you get it to work?? Driving me crazy.
joandroid said:
What firmware version do you have?
Thank you
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
ROM version: 1.3.5
in changelog was mentioned that it fixes pairing problem for android 8.0 and above
Sparrow318 said:
ROM version: 1.3.5
in changelog was mentioned that it fixes pairing problem for android 8.0 and above
Click to expand...
Click to collapse
I did the same as you and it's not working. I have 1.3.5 and amazfit the last from google play store. I have to try with 2.0 version i havent done it yet
Thanks for information
Sent from my Pixel XL using Tapatalk
Hi
With version 2.0 and firmware 1.3.5 I was able to pair and connect my watch with Pixel XL and Android 8.1
Thank you for you help
bicicletero said:
I also had this problem, and now the smartwatch is completely useless. After I updated my Pixel XL to Android 8.1, the sync problems started. I tried to make a reset (unpair, do a factory reset and try to pair again), but now I'm stucked on the QR Code screen. I read it with the Amazfit App, but when it tries to sync the previous information with the smartwatch, it gives me generic sync error. I also tried to skip the sync old information part, without success.
Click to expand...
Click to collapse
Guys if you have the generic sync error and you are stuck at QR code, try selecting an american server with a VPN BEFORE trying to open the Amazfit app: some italian users managed to pass it and sync again with this trick
Solved with an pre 7 device
If you by any chance have a pre 8.0 Android phone you can pair your device to that one and update it to firmware version 1.3.5. After that you can perform a factory reset of the watch and pair it to your Android 8+ phone and it will pair. Proved with a Pixel XL
I also got the same problem after the december upgrade of the Amazfit app. Lost contact with the watch, I have tried several hard factory resets, multiple reinstalled the apps, tried several different phones, now my watch keeps hanging in de XR screen, and is completely useless for me. No upgrade to fix this bug. Also no support. The watch has a great design, but software is crappy.
Related
Windows 8.0 phone - Good wireless connection; full battery; working Nokia and Microsoft accounts; enough empty space available; hard reset twice or more; correct time and date.
I do not receive any apps updates yet I always get an error message saying "We are currently unable to check for updates."
*first-time user of a windows phone
weird...
which version of software is on device? settings - about (version OS and firmware)
for easy check and flash latest official version of WP software you can use Nokia Software Recovery Tool, Windows 7 or 8.x is needed...
If you want to update to Preview for Developers WP8.1 version check here
dxdy said:
weird...
which version of software is on device? settings - about (version OS and firmware)
for easy check and flash latest official version of WP software you can use Nokia Software Recovery Tool, Windows 7 or 8.x is needed...
If you want to update to Preview for Developers WP8.1 version check here
Click to expand...
Click to collapse
thanks for replying
the version is OS 8.0.10211.204
firmware version 1232.5951.1249.1017
ahmedeissa said:
thanks for replying
the version is OS 8.0.10211.204
firmware version 1232.5951.1249.1017
Click to expand...
Click to collapse
is possible you have too old software and update server not recognize or give update for current phone version. you can use Nokia Software Recovery Tool to update to latest official WP8 version: 3051.40000.1349.0025 (this is latest official version of WP8.0 called "Black")... also dont forget to update Nokia system apps after software upgrade (you can use app SysApp Pusher from Store)
after if you want test version of WP8.1 via Preview for Developers, just use links from my previous post
thanks for replying. before i saw your reply i had already used Nokia Software Updater for Retail and i updated my phone's system
to firmware version: 3051.40000.1349.0002 and not 3051.40000.1349.0025 as you mentioned
and the software version is still OS 8.0 not 8.1 or other versions
when i connect to the software updater it tells me that there are no newer versions. it doesn't show the 8.1 version
8.1 not official released. You must activate Preview for Developers to install 8.1. Read my first post, there is link how to make this
Sent from my Lumia 920 using Tapatalk
dxdy said:
8.1 not official released. You must activate Preview for Developers to install 8.1. Read my first post, there is link how to make this
Sent from my Lumia 920 using Tapatalk
Click to expand...
Click to collapse
thanks for your reply. Is the phone's hardware compatible with android? (jellybean)
also there's freedom.apk for android phones, is there something similar to it that would work with windows phones?
also as you may know there's "black market" for android phones that allows you to download applications for free. is there something like it for windows phones 8.0?
ahmedeissa said:
thanks for your reply. Is the phone's hardware compatible with android? (jellybean)
also there's freedom.apk for android phones, is there something similar to it that would work with windows phones?
also as you may know there's "black market" for android phones that allows you to download applications for free. is there something like it for windows phones 8.0?
Click to expand...
Click to collapse
you cant flash android on WP devices or use apk files... is impossible... and why to go switch from horse to donkey
also no way to use black market or any other market on WP. Why you think WP OS is most secure OS without one malware or virus? because no c*ap and bogus app like on android...
if you want app for free watch for promotional period of apps.. in 3 year i collect pay software worth more than $2000... just be patient and many good apps and games can get free or for cheap price...
just use app as
http://windowsphone.com/s?appId=890485c3-7c32-42e3-b906-61ea62caeaa3
http://windowsphone.com/s?appId=e09858f0-0cf7-4b33-b754-54dd121b3c5d
http://windowsphone.com/s?appId=286ba4a5-33c3-489a-a5a1-8675503aadca
P.S.
all topic about illegal/pirated stuff here on forum is forbidden, but only for info you can use max 10 pirated XAP files on developer unlocked phone (but you must pay $19/year to Microsoft for Developer unlock)...
Similar, but worse problem here.
dxdy said:
is possible you have too old software and update server not recognize or give update for current phone version. you can use Nokia Software Recovery Tool to update to latest official WP8 version: 3051.40000.1349.0025 (this is latest official version of WP8.0 called "Black")... also dont forget to update Nokia system apps after software upgrade (you can use app ... from Store)
after if you want test version of WP8.1 via Preview for Developers, just use links from my previous post
Click to expand...
Click to collapse
Hello. I have a similar problem, and as you stated I believe the OS version is so old that the server does not recognize it. So I have tried several of Nokia's apps, Software Updater for Retail, Care Suite and they do recognize the phone, the software and it immediately states there is an update ready. However, when it tries to put the phone in Flash Update mode, the phone does not boot and I get an error saying there was a problem. If I disconnect the phone, press volumen-down and on buttons I can reset it and Works fine, but I am unable to do an update.
Here are the details for the phone:
Lumia 920
Country Variant PR
OS Versión 8.0.10211.204
Firmware revisión number 1232.5957.1308.0002
Radio Software version 1.0.202093.3
Firmware Update Notifier 1.1.0.3
Silent Installer 1.5.0.0
Build ID 153556
Extras+Info App Versión 3.8.1.10
I really don't know what to do. My phone hasn't even received GDR2, much less 3 and for sure it probably won't receive 8.1. Any information on how I can manually place the phone in Flash Update mode so maybe the care suite Works??? I was able, through the care suite to put in in test mode, but not in flash update mode.
Thanks in advance. Posting in the Nokia forums was absolutely no help at all. Could it be that I am doing something wrong with the care suite??? I used instructions from several sites to try to use the care suite.
To delete.
anaheiim said:
What is error?
Click to expand...
Click to collapse
Hello Anaheiim.
When the software tries to make the Nokia go into Flash Update mode, the phone stays at the NOKIA logo after rebooting. After about a minute, the application on the PC, say for example the Multisoftware Updater cancels out. In the case of Multisoftware updater, the error says : product in UEFI mode did not appear.
I can reset my phone and I get back the normal operations, but it appeas it never goes into a mode that is needed to download the software, or I don't have a driver or something similar to talk to the phone from my PC when it goes into that mode.
To delete.
anaheiim said:
What is error?
Click to expand...
Click to collapse
Hello Anaheiim.
When the software tries to make the Nokia go into Flash Update mode, the phone stays at the NOKIA logo after rebooting. After about a minute, the application on the PC, say for example the Multisoftware Updater cancels out. In the case of Multisoftware updater, the error says : product in UEFI mode did not appear.
I can reset my phone and I get back the normal operations, but it appeas it never goes into a mode that is needed to download the software, or I don't have a driver or something similar to talk to the phone from my PC when it goes into that mode.
To delete.
anaheiim said:
And following this tutorial? He said what? http://forum.xda-developers.com/showthread.php?t=2515453
The difference here is that you must go into flash mode manually.
Click to expand...
Click to collapse
Thanks Anaheiim. I am downloading the files in the requisities section of that thread and will follow the steps carefully. On your response you state "you must go into flash mode manually". But I don't see that mentioned in the tutorial, am I missing something??? Is there somewhere I can find how to place a Lumia 920 in flash mode manually???
Thanks again, at least I see a possibility of this working now!!!
To delete.
anaheiim said:
In the link that I give you
Part:
Follow the tutorial
Click to expand...
Click to collapse
Will do Anaheiim, thanks!!! Will follow the tutorial exactly and let you know how it goes. Super helpful, thanks. After the install I will leave a donation. Again, thanks a lot I can't tell you how helpful it is to have people like you that have gone through all this!
Hello again Anaheiim, unfortunatelly it has been no luck with the method you posted. I downloaded all the components fine. I downloaded the firmware I needed. I am able to get to the point when I try to recover the phone. I turn it off, plug the USB cord (already connected to the PC) and press the volumen down-power keys at the same time until I get ONE quick vibration. I then click the retry button on the tool on the PC. It starts trying to update, the phone shows the NOKIA logo mid-screen, most of the time it reboots and it shows it again and then goes directly into the Windows Phone logo and then back in to the start menú. Otherwise it just sits at the Nokia Logo. Either way, the PC App after a few minutes tells me it can't recover. Usually no error. Tried several different USB ports. Sometimes on some ports I get this error: DTL Connection: Could not connect to media. DTL Back-End error code = 0x8400A403. DTL Back-End: Driver initialization failed. DCM status code = 0x84004415, Common USB DCM: No device found from the target USB port, last error code = 0x80070003. .
Exception..
But that's it. Doesn't ever go into Flash Update mode.
To delete.
Re Register the softpub.dll
Disable third party firewall if any
Automatically detect settings for a proxy server from your LAN
Hello! I bought an almost new Huawei honor 7 lite and it worked fine, then i did a factory reset just because i wanted to because i started using the phone and there was some **** left in the phone by previous user, and now i can't use the phone without logging in with the account of the previous phone number and i can't reach him anymore. i have tried the swype method and everything but nothing seems to be working. Anyone here know how to get in?
Tomperz said:
Hello! I bought an almost new Huawei honor 7 lite and it worked fine, then i did a factory reset just because i wanted to because i started using the phone and there was some **** left in the phone by previous user, and now i can't use the phone without logging in with the account of the previous phone number and i can't reach him anymore. i have tried the swype method and everything but nothing seems to be working. Anyone here know how to get in?
Click to expand...
Click to collapse
re-flash whole rom. heres tool for it: https://forum.xda-developers.com/honor-7/general/honor-7-multi-tool-t3281176
or then get update.app to sd card and flash it.
I have same problem with my Honor 7 lite.. from where i can download this update.app ?
Thank you in advance!
buynow said:
I have same problem with my Honor 7 lite.. from where i can download this update.app ?
Thank you in advance!
Click to expand...
Click to collapse
You can download firmware from honor official website...
What is your model number and build number??
Hi, I use a Oneplus 5T and I´m trying pair with a Amazfit Pace, but i don´t gived success.
"Pair Failed" "Cannot connect to the watch, please keep the watch near the phone until the backup recovery te completed."
Can someone help me?
Thank´s
Hello. If Pace is brand new and phone has Android 8.0+, it won't pair. First pair with another phone with Android 7.1 or older (or an iPhone), update watch's firmware, unpair and then pair with your phone.
lfom said:
Hello. If Pace is brand new and phone has Android 8.0+, it won't pair. First pair with another phone with Android 7.1 or older (or an iPhone), update watch's firmware, unpair and then pair with your phone.
Click to expand...
Click to collapse
Hello,
I tried to do this but continued not paired with Oneplus... Paired with another android, but not paired with Oneplus.
Same error.
jeffersonbebe said:
Hello,
I tried to do this but continued not paired with Oneplus... Paired with another android, but not paired with Oneplus.
Same error.
Click to expand...
Click to collapse
Did you update the watch?
Quinny899 said:
Did you update the watch?
Click to expand...
Click to collapse
Even I am facing the same issue. I paired the watch with another Android phone, updated the OS to 1.3.6d and then tried to pair it again with my OnePlus 5t but still the same issue.
im_nishanto said:
Even I am facing the same issue. I paired the watch with another Android phone, updated the OS to 1.3.6d and then tried to pair it again with my OnePlus 5t but still the same issue.
Click to expand...
Click to collapse
What ROM on phone? Some versions have problems with Bluetooth, you may need to downgrade the ROM on phone.
lfom said:
What ROM on phone? Some versions have problems with Bluetooth, you may need to downgrade the ROM on phone.
Click to expand...
Click to collapse
I am using Open Beta Oreo Rom for OnePlus 5t.
For my part I have no problem. I am in android 8.1 and Rom WOS 2.6.0.12
I paired it the first time under android 8.0.
You need to clear the cache of the amazfit application.
im_nishanto said:
I am using Open Beta Oreo Rom for OnePlus 5t.
Click to expand...
Click to collapse
Hi, I faced similar problem few days ago. The watch just refused to pair with my phone. Tried to install and uninstall the watch OS many times still failed. At the end, we found that it was my phone OS problem. I tried to pair the watch with another phone and it paired without problem. I then clean reflashed my phone ROM and solved the problem. For your information, my phone is OP3T and the phone rom is MSM Xtended (android 8.1.0). Thanks @IFOm for his help
I suggest you reflash your phone rom.
Quinny899 said:
Did you update the watch?
Click to expand...
Click to collapse
I updated, but it stays in the same firmware 1.3.0n, saying that it is updated.
lfom said:
What ROM on phone? Some versions have problems with Bluetooth, you may need to downgrade the ROM on phone.
Click to expand...
Click to collapse
I updated, but it stays in the same firmware 1.3.0n, saying that it is updated.
chincheang said:
Hi, I faced similar problem few days ago. The watch just refused to pair with my phone. Tried to install and uninstall the watch OS many times still failed. At the end, we found that it was my phone OS problem. I tried to pair the watch with another phone and it paired without problem. I then clean reflashed my phone ROM and solved the problem. For your information, my phone is OP3T and the phone rom is MSM Xtended (android 8.1.0). Thanks @IFOm for his help
I suggest you reflash your phone rom.
Click to expand...
Click to collapse
Did you a hardreset in your phone?
lfom said:
What ROM on phone? Some versions have problems with Bluetooth, you may need to downgrade the ROM on phone.
Click to expand...
Click to collapse
I was same problem, and for repair it I has to factory reset OP5 (reflash ROM, I use beta too), after I downloaded amazfit watch from play store and pairing fine
kingofdevils said:
I was same problem, and for repair it I has to factory reset OP5 (reflash ROM, I use beta too), after I downloaded amazfit watch from play store and pairing fine
Click to expand...
Click to collapse
HI, first I need to update Pace's firmware, I can not.
jeffersonbebe said:
Did you a hardreset in your phone?
Click to expand...
Click to collapse
I cleaned flash the ROM. If you check xda, normally the op will give you clear instruction how to do clean reflash. After reflash, you need to setup your phone again.
jeffersonbebe said:
HI, first I need to update Pace's firmware, I can not.
Click to expand...
Click to collapse
Why? pace firmware don´t affect to sync it with phone, you can update pace later
kingofdevils said:
Why? pace firmware don´t affect to sync it with phone, you can update pace later
Click to expand...
Click to collapse
Old Pace 1.3.x firmware won't sync with Android 8.0+ and newest iOS, firmware must be updated first using another phone.
I has stockfied 1.3.6 and 8 Oreo and sync perfect, since December to May, I changed rom for wos2, same phone and beta, like OP
This should work: pair the watch using your account using another phone, then put watch in airplane mode (so it will disconnect from phone) and uninstall Amazfit app and remove watch from phone's Bluetooth settings (watch won't be unpaired, so no factory reset). Then go to your phone, make sure the watch isn't listed in Bluetooth settings, install the same app version used before, turn off airplane mode on watch and login to your account. The watch and phone should show the usual pair request with a pin code, confirm in both and they should be paired. If it doesn't happen then your phone's Bluetooth cannot see the watch for some reason... I have done this thousands times and it always worked if the phone can find the watch.
I have the OnePlus 5T and when I got my watch I had the same problem.....all you have to do is
1) Downgrade to Android 7
2) Pair the watch let it update to latest firmware
3) Update your OnePlus 5T to Android 8.0/8.1
4) Enjoy your brand new Pace
........................................................................................
ALTERNATIVE
Use a second phone that is on Android 7
Pair the watch and update it
Then unpair it
Go to OnePlus 5T and pair it
It should work either way?
[GUIDE] New method to install Google Mobile Services on Huawei P40 & P40 Lite
Hi guys!!!
I'm thrilled to report that I just found this new way to get Google Mobile Services to work on Huawei and Honor devices that don't have them.
It's totally working [today is 20 june 2020] and it SOLVES the new problem that doesn't let the users sign-in to their Google accounts at the time of the installation.
Everything is very detailed and shown step-by-step on the following video...
Please be sure to download the .zip file that has all the stuff needed to get this to work. Using this method, that zip file must be copied to the root a pen-drive. It's here, for Android 10: https://bit.ly/2ATWPGE
- If the LZ app (big "G" icon") isn't working as expected on your phone, you might have to reset the device.
[UPDATE - 29 / June / 2020]
Important stuff:
- You must have your phone in english in order to proceed with this method.
- After it is complete you can switch back to your preferred language, without problems.
- If you want to add more Google accounts, you should do this procure while you are installing GMS. Use this link: https://youtu.be/jgCN6SeP32c?t=1418 It guides directly to the right moment in that video.
By the way, it's working great for a lot of users. Push notifications, though, aren't working.
Still, I believe this is the best method around.
Cheers!
Any feedback on battery drain once google services are installed?
Asking this because as far as I remember, google services have always been the top consumer in standby on all my phones, and I was happy to get a P40 without GMS, at first, and sadly found out their store is like a no mans' land lol.
I'll probably run without GMS for a while to check how battery drain goes, and see if Huawei is doing a better job If time allows I'll post my findings.
doesnt working Im stuck in the first step, when Im about to restore the backup file...
it just doesnt appear the backup...
has someone with firmware: 10.1.136 successfully installed the services? on the old version it went immediately with 10.1.136 I tried several times now always without success
bj82xx said:
has someone with firmware: 10.1.136 successfully installed the services? on the old version it went immediately with 10.1.136 I tried several times now always without success
Click to expand...
Click to collapse
what error message?
3c said:
Any feedback on battery drain once google services are installed?
Asking this because as far as I remember, google services have always been the top consumer in standby on all my phones, and I was happy to get a P40 without GMS, at first, and sadly found out their store is like a no mans' land lol.
I'll probably run without GMS for a while to check how battery drain goes, and see if Huawei is doing a better job If time allows I'll post my findings.
Click to expand...
Click to collapse
Any feedback?
bj82xx said:
has someone with firmware: 10.1.136 successfully installed the services? on the old version it went immediately with 10.1.136 I tried several times now always without success
Click to expand...
Click to collapse
It is possible to perform a downgrade using HiSuite. I'm considering it myself because i have had no luck installing gms without annoying notifications.
coeptisr said:
Any feedback?
Click to expand...
Click to collapse
So far, I've tested the Huawei P40 Lite E vs Pixel 3 XL, both without SIM card.
P40 achieves an average of 8mA in standby, while Pixel 3 XL is at an average of 10mA. Not much, but still P40 is performing better.
Usage consumption shows very similar drain around 400-500mA, resulting in both devices showing a run time of about 8 hours. However the Pixel 3 XL battery is aging and have a remaining capacity of 3300mAh, compared to the P40 having 4000mAh (will post actual capacity later).
Usage consumption highly depends on screen technology and brightness levels, the later I haven't checked or messed with.
Noticeably the P40 is brand new and have a brand new battery (still trying to get an estimated battery capacity as I forgot to exclude my app from google AND huawei battery optimizations).
I'd say Huawei services are performing better than Google services, by 20%.
I tried to install google service on my P40 Lite E, but couldn't find a valid method. Are there any way to do so these days?
I was hoping to compare battery life on the P40 Lite E with and without Google services, but it seems a no go now.
How to downgrade a P40 Lite? I have managed to download the correct firmware, but how can i get it to flash on the device?
CrisGSM said:
How to downgrade a P40 Lite? I have managed to download the correct firmware, but how can i get it to flash on the device?
Click to expand...
Click to collapse
If you find a way to downgrade firmware, don't forget to post it as I'm sure many may be interested, including me.
you can downgrade easily the ones which don't have the anti-rollback
download firmware, extract the dload folder on some sd card or usb, attach usb otg to the phone and boot with volume up - power. Then select usb update. Worked fine
I do have it for JNY-LX1 if someone needs
bender_007 said:
you can downgrade easily the ones which don't have the anti-rollback
download firmware, extract the dload folder on some sd card or usb, attach usb otg to the phone and boot with volume up - power. Then select usb update. Worked fine
I do have it for JNY-LX1 if someone needs
Click to expand...
Click to collapse
Is this JNY-LX1 for the P40 Lite E? Can GMS be installed on it then? If so, I'm definitely interested as I couldn't find a single firmware for the P40 Lite E.
Only found this version so far, but impossible to download because of quota: Huawei_P40_Lite_E_Arthur-L29_10.1.0.112_C185E2R3P1_EMUI10.1.0_05016MMP_Dload.zip
All sites are referring to the same GDrive file, which can't be downloaded, here is one of them: https://firmwarefile.com/huawei-p40-lite-e-arthur-l29
Can you pm some od the info from your system-about? Current emui etc
Sent from my Pixel 4 using Tapatalk
bender_007 said:
Can you pm some od the info from your system-about? Current emui etc
Sent from my Pixel 4 using Tapatalk
Click to expand...
Click to collapse
I read it's impossible to downgrade from EMUI 10.1 back to 10.0 or 9.x, so there's no way I'll be able to install GMS I suppose. IMO phones without GMS are pretty useless. App Gallery have not half the apps on Play Store.
Here are details of system about, just in case I could get my hand on 9.x or older 10.x firmware to attempt a flash.
Device: HUAWEI P40 lite E
Model: ART-L29
Build: 10.1.0.128(C432E2R1P1)
EMUI: 10.1.0
CrisGSM said:
How to downgrade a P40 Lite? I have managed to download the correct firmware, but how can i get it to flash on the device?
Click to expand...
Click to collapse
you can downgrade directly on HiSuite
Unfortunately, you can't. On the latest version of HiSuite, you don't have the button with the "Older Versions". If you install an older version of HiSuite, you can't connect to the phone. So this method doesn't work at this moment.
CrisGSM said:
Unfortunately, you can't. On the latest version of HiSuite, you don't have the button with the "Older Versions". If you install an older version of HiSuite, you can't connect to the phone. So this method doesn't work at this moment.
Click to expand...
Click to collapse
Obrigado
I did that yesterday. I am on windows 7 with HiSuite updated, not sure if that's relevant.
Maybe it is, i am on windows 10 and it doesn't let me do that. I just bought a USB type-C memory stick and i will try to update from it, holding volume up and power button while powering up the phone.
CrisGSM said:
Unfortunately, you can't. On the latest version of HiSuite, you don't have the button with the "Older Versions". If you install an older version of HiSuite, you can't connect to the phone. So this method doesn't work at this moment.
Click to expand...
Click to collapse
Windows 10 here, no "older versions" for my P40 Lite E. However I manage to downgrade by putting the OTA zip on the SD card and updating from it. Then I was able to install and run lzplay. Now stuck at login though.
Hello,
Forgive my lack of experience in this forum. My daughters Pixel 6 has the following message:
Problems updating this device.
This device can't receive any future system updates.
Contact your devices manufacturer for support.
She got this message after she got an alert saying her phone has not updated in the last 21 days.
Is there anything she can do to get rid of this error and update the phone?
Her phone is completely stock and running Android 13.
Would need detailed instructions if anything can be done.
We tried using the pixel software updater tool here https://pixelrepair.withgoogle.com/ but get an error about 15% into the software install. No info on the error. just the word "error"
We tried a factory reset using the boot rescue mode, but it says the phone could not be erased.
The phone is currently working, it just has the message when updates are attempted.
Thank you for any help and suggestions.
Anikir said:
Hello,
Forgive my lack of experience in this forum. My daughters Pixel 6 has the following message:
Problems updating this device.
This device can't receive any future system updates.
Contact your devices manufacturer for support.
She got this message after she got an alert saying her phone has not updated in the last 21 days.
Is there anything she can do to get rid of this error and update the phone?
Her phone is completely stock and running Android 13.
Would need detailed instructions if anything can be done.
We tried using the pixel software updater tool here https://pixelrepair.withgoogle.com/ but get an error about 15% into the software install. No info on the error. just the word "error"
We tried a factory reset using the boot rescue mode, but it says the phone could not be erased.
The phone is currently working, it just has the message when updates are attempted.
Thank you for any help and suggestions.
Click to expand...
Click to collapse
Try clearing storage on the Google Play Services app.
Lughnasadh said:
Try clearing storage on the Google Play Services app.
Click to expand...
Click to collapse
We already tried that several times as well. Thanks.
Anikir said:
We already tried that several times as well. Thanks.
Click to expand...
Click to collapse
Maybe try Android Flash Tool to update to the latest build. You will need to have OEM unlocking enabled in Developer Options. The directions in there are pretty straight forward. Would probably want to tick "Wipe Device" and "Force Flash Partitions". If you go this route, make sure you have the latest Platform Tools and USB drivers. Also suggest using an A to C USB 2.0 cable.