When my phone was dilivered it had the rom:
P15_GQ3039LF1_Ulefone_T1_V06_20170803_20170803-2023
Now I have flashed it with:
P15_GQ3039LF1_Ulefone_T1_V05_20171030 - full_p15v57c2k_gq_tee-user 7.0 NRD90M
Why has one rom a V06 and one a v05 mark?
Did you every figure out what the difference is I'm tempted to upgrade but want to see if it's works properly or not
No luck in finding out what te difference is. It is a big mistery to me. I flashed the phone with the newest rom and everything works fine.
Did you download and flash or do the OTA update? Trying to figure out of I'll lose root if I update OTA
MikeyLee said:
Did you download and flash or do the OTA update? Trying to figure out of I'll lose root if I update OTA
Click to expand...
Click to collapse
I downloaded the newest rom from needrom (P15_GQ3039LF1_Ulefone_T1_V05_20171030) and flashed the phone with that rom.
Ok thanks
Hey did you flash with the computer or using recovery on the phone?
I've got it
The difference between them is the v05 is for the regular one and v06 is for the premium one. I always flash on pc but i use Ubuntu.
Related
I'm running a RAZR MAXX XT912. Around Christmas I loaded it up with the Jellybean OTA leak ROM (98.72.8.XT912.Verizon.en.US kernel) and all was well and everything worked how it should. Using Safestrap, I flashed WYKA (version 2.x) on slot 1 and since it was built on the same kernel as the leak ROM, both my stock and my slot 1 ROMs worked perfectly.
Shortly after the Official Jellybean OTA was released, WYKA updated to version 3.x and stopped working. It required a kernel update 98.72.16.XT912.Verizon.en.US to fix the problem. I updated the kernel and my WYKA ROM on slot 1 was working great, but now my stock ROM won't boot because it uses a different kernel.
I have tried several things to get my stock ROM to work:
1. I tried a factory reset in Recovery mode
2. I tried to downgrade the kernel back to the leak kernel
3. I tried flashing the ROM I have installed on slot 1 to the stock ROM
None of these methods have worked for me. Now my stock ROM is unable to boot and is basically stuck in a reboot cycle. Luckily my slot 1 ROM is still working great, so at least I'm not without a working ROM, but I really want to have my stock ROM working if at all possible.
Do you have any suggestions on what I should try next?
ivan8r said:
I'm running a RAZR MAXX XT912. Around Christmas I loaded it up with the Jellybean OTA leak ROM (98.72.8.XT912.Verizon.en.US kernel) and all was well and everything worked how it should. Using Safestrap, I flashed WYKA (version 2.x) on slot 1 and since it was built on the same kernel as the leak ROM, both my stock and my slot 1 ROMs worked perfectly.
Shortly after the Official Jellybean OTA was released, WYKA updated to version 3.x and stopped working. It required a kernel update 98.72.16.XT912.Verizon.en.US to fix the problem. I updated the kernel and my WYKA ROM on slot 1 was working great, but now my stock ROM won't boot because it uses a different kernel.
I have tried several things to get my stock ROM to work:
1. I tried a factory reset in Recovery mode
2. I tried to downgrade the kernel back to the leak kernel
3. I tried flashing the ROM I have installed on slot 1 to the stock ROM
None of these methods have worked for me. Now my stock ROM is unable to boot and is basically stuck in a reboot cycle. Luckily my slot 1 ROM is still working great, so at least I'm not without a working ROM, but I really want to have my stock ROM working if at all possible.
Do you have any suggestions on what I should try next?
Click to expand...
Click to collapse
try to reflash it,maybe it works
spytgm said:
try to reflash it,maybe it works
Click to expand...
Click to collapse
Reflash with what? WYKA or OTA?
Is there someplace where I can download the official Jellybean OTA with the 98.72.16.XT912.Verizon.en.US kernel and flash it from Recovery?
ivan8r said:
Reflash with what? WYKA or OTA?
Is there someplace where I can download the official Jellybean OTA with the 98.72.16.XT912.Verizon.en.US kernel and flash it from Recovery?
Click to expand...
Click to collapse
if your version is that 9.8.2O-72_VZW-16
Blur_Version.98.72.16.XT912.Verizon.en.US you can find i here http://sbf.droid-developers.org/cdma_spyder/list.php
if you flash ota.
but you can wait for someone for reply and help you with another way.
by the way read this
Once you flash this firmware, you cannot flash another with lower Main Secure Version (results stuck at mbm).
Main Secure Version (secure version of cdt.bin) is written to eFuse.
This firmware requires following secure versions to boot. Partitions marked as "checked once" are checked
only after being flashed with fastboot (or RSD Lite).
You can try using this: http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
That will give you stock back.
Thanks guys! I'm downloading both the ROM and firmware flashing tool... I'll let you know how it works out!
Gus194 said:
You can try using this: http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
That will give you stock back.
Click to expand...
Click to collapse
Thank you!! The DROID RAZR Utility fixed it! I'm now running the official Jellybean OTA and I'm rooted.
Hey guys,
Can I still use the easy root tool to root after updating to the 4.4.4 firmware?
Thanks
Nope
I tried but it is getting stuck on CREATING VM (JAVASUCKS)
Same here... +1 Stuck on "Creating VM... "
No, the known flaws in 4.4.2 are all patched for latest fw, only current way around it is to downgrade, root install dual recovery and flash a pre-rooted zip from CWM.
In other words;
Go back to .314 (4.4.2) firmware,
Root,
Install a recovery,
And flash the new 4.4.4 firmware via recovery.
V4LKyR said:
In other words;
Go back to .314 (4.4.2) firmware,
Root,
Install a recovery,
And flash the new 4.4.4 firmware via recovery.
Click to expand...
Click to collapse
There are new rumors that you can root 314 - select preserve mode in SuperSU - and go OTA... and root will remain...
http://forum.xda-developers.com/showpost.php?p=56542305&postcount=131
nomaj said:
There are new rumors that you can root 314 - select preserve mode in SuperSU - and go OTA... and root will remain...
http://forum.xda-developers.com/showpost.php?p=56542305&postcount=131
Click to expand...
Click to collapse
Yeah I've heard that aswell. It's most likely working. Shall I try it? Just spent a few hours getting 4.4.4 work on my phone with root...
Ah right - Fuuuun...
I think i'll just carry on stock until someone sorts out a rooting method for 4.4.4 that doesn't involve so much faffing about lol.
Thanks for all the replies
Just keep a eye in Z3 Section too
4.4.4 firmrare is a near direct port
Hi folks,
I have a new 4.4.4 Z2, should I root it now or wait after the Lollipop version is installed?
Will I be able to install the Lollipop when rooted?
Godyn said:
Hi folks,
I have a new 4.4.4 Z2, should I root it now or wait after the Lollipop version is installed?
Will I be able to install the Lollipop when rooted?
Click to expand...
Click to collapse
We don't know if we recive lollipop we can make a upgrade...but you can easly unroot the phone, flashing ftf from flashtool
Alllrriight ! good to know !
Found it !
http://forum.xda-developers.com/showthread.php?t=2054486
http://www.flashtool.net
Godyn said:
Alllrriight ! good to know !
Found it !
http://forum.xda-developers.com/showthread.php?t=2054486
http://www.flashtool.net
Click to expand...
Click to collapse
Now struggling for a night with unlocking the bootloader, sooms that W7x64 has a prob with it so he can't find the driver.
I'm becoming a nerd
New firmware is out NJ6. I can't get the OTA yet but it is available from KIES. Hopefully this will solve all of my signal issues.
I saw this on sammobile as well...most likely this will close the current root loophole...will wait patiently until an awesome developer can create a rooted 4.4.4 rom.
Yes, I did lose root but that is okay with me if it helps my signal. Haven't been able to test it in problem areas yet.
murmur70 said:
Yes, I did lose root but that is okay with me if it helps my signal. Haven't been able to test it in problem areas yet.
Click to expand...
Click to collapse
Have you tried to root again with towel root?
Towel Root no longer works, I tried it after I updated...
The-Beast said:
Towel Root no longer works, I tried it after I updated...
Click to expand...
Click to collapse
Thanks!
Sent from my Nexus 7 using Tapatalk
I am cautiously optimistic that my signal is much improved.
Sent from my SM-T700 using XDA Free mobile app
I actually have 4.4.4 rooted right now on my device but safestrap doesn't work properly now. It starts to load but then reboots into OS.
The first 4.4.4 rom I made would boot, but only had a black screen (kernel modules didn't match boot.img), then I tried the nj6 boot.img and got the warning about unauthorized kernel. So, I decided to try one more thing. I reflashed the pre-rooted 4.4.4 rom I made and then flashed all of the 4.4.4 firmware in Odin EXCEPT for the system partition. This allowed me to boot into my rooted nj6 4.4.4 rom.
gr8nole said:
I actually have 4.4.4 rooted right now on my device but safestrap doesn't work properly now. It starts to load but then reboots into OS.
The first 4.4.4 rom I made would boot, but only had a black screen (kernel modules didn't match boot.img), then I tried the nj6 boot.img and got the warning about unauthorized kernel. So, I decided to try one more thing. I reflashed the pre-rooted 4.4.4 rom I made and then flashed all of the 4.4.4 firmware in Odin EXCEPT for the system partition. This allowed me to boot into my rooted nj6 4.4.4 rom.
Click to expand...
Click to collapse
Ain't gonna lie ... a lot of that went right over my head; but I'm excited about it anyway LOL :good:
How do I get it on my phones have 2 Note 3's in my house. It's not available on Kies or OTA in my Texas area. Not rooted phones.. or just wait some more?? Thanks
We're actually getting an update inline with other carriers? Anyone noticing any improvements? And do we have any idea when it'll push OTA?
Can someone post up just the radio?
pez910 said:
We're actually getting an update inline with other carriers? Anyone noticing any improvements? And do we have any idea when it'll push OTA?
Click to expand...
Click to collapse
The only thing I have noticed since updating last night is, data speeds have dropped. Not sure if its the radios, or if its the network being bottle necked, but Its taking me forever to download apps and files from my google drive account..
YankInDaSouth said:
Ain't gonna lie ... a lot of that went right over my head; but I'm excited about it anyway LOL :good:
Click to expand...
Click to collapse
can you send on the link for your root 4.4.4
gr8nole said:
I actually have 4.4.4 rooted right now on my device but safestrap doesn't work properly now. It starts to load but then reboots into OS.
The first 4.4.4 rom I made would boot, but only had a black screen (kernel modules didn't match boot.img), then I tried the nj6 boot.img and got the warning about unauthorized kernel. So, I decided to try one more thing. I reflashed the pre-rooted 4.4.4 rom I made and then flashed all of the 4.4.4 firmware in Odin EXCEPT for the system partition. This allowed me to boot into my rooted nj6 4.4.4 rom.
Click to expand...
Click to collapse
I was having the same issue when I tried to port Sprint 4.4.4 It would boot but I get black screen... Are you sure you flashed the 4.4.4 bootloader?
I would try to make a deodex 4.4.4 system flashable zip and flash and then right after it reboot to odin and flash the 4.4.4 kernel might work without flashing the bootloader and that way we have a working SS.
Kind of a newb to Note 3 firmware upgrades. I just downloaded the new NJ6 firmware from Sammobile. What's the best way to flash this?
gypsy214 said:
I was having the same issue when I tried to port Sprint 4.4.4 It would boot but I get black screen... Are you sure you flashed the 4.4.4 bootloader?
I would try to make a deodex 4.4.4 system flashable zip and flash and then right after it reboot to odin and flash the 4.4.4 kernel might work without flashing the bootloader and that way we have a working SS.
Click to expand...
Click to collapse
Can you upload please
uberalbo said:
Kind of a newb to Note 3 firmware upgrades. I just downloaded the new NJ6 firmware from Sammobile. What's the best way to flash this?
Click to expand...
Click to collapse
If you're a newb I recommend to stay out of it if you want root and ss. We waited all this time we can wait more to have a stable rooted with ss working version
gypsy214 said:
I was having the same issue when I tried to port Sprint 4.4.4 It would boot but I get black screen... Are you sure you flashed the 4.4.4 bootloader?
I would try to make a deodex 4.4.4 system flashable zip and flash and then right after it reboot to odin and flash the 4.4.4 kernel might work without flashing the bootloader and that way we have a working SS.
Click to expand...
Click to collapse
joseph- said:
Can you upload please
Click to expand...
Click to collapse
The only way to tell if it will work is to have someone flash just the system when its a flashable zip and then reboot to download and flash kernel via odin
gypsy214 said:
I was having the same issue when I tried to port Sprint 4.4.4 It would boot but I get black screen... Are you sure you flashed the 4.4.4 bootloader?
I would try to make a deodex 4.4.4 system flashable zip and flash and then right after it reboot to odin and flash the 4.4.4 kernel might work without flashing the bootloader and that way we have a working SS.
Click to expand...
Click to collapse
I tried that and it didn't work. The NC4 bootloader won't let you use the NJ6 boot.img. It gives the unauthorized software message.
I have a moto E dual Sim !! my phone is rooted with Cynaogen mod 11 installed!! now i cant install motoral service update from playstore to install Lollipop updates!
Rooted phones cannot survive the OTA's.
Don't even try to go for an OTA you would end bricking you phone.
The Seven said:
I have a moto E dual Sim !! my phone is rooted with Cynaogen mod 11 installed!! now i cant install motoral service update from playstore to install Lollipop updates!
Click to expand...
Click to collapse
You need to be on stock ROM to install stock updates. As simple as that.
You need to be on pure stock rom (no optimized or debloated) and you can recieve OTA (after ota update u cant downgrade to kitkat) so if u want easy just flah the flashable 5.0.2 update search in forum (this way you can downgrade)
P.S : why not u just flash CM12 as that has more features then Stock ROM and bug free now...
Adarsh1998 said:
You need to be on pure stock rom (no optimized or debloated) and you can recieve OTA (after ota update u cant downgrade to kitkat) so if u want easy just flah the flashable 5.0.2 update search in forum (this way you can downgrade)
P.S : why not u just flash CM12 as that has more features then Stock ROM and bug free now...
Click to expand...
Click to collapse
Thank you but the twrp touch isnt working Should i flash it with orginal firmware ! and then wait for OTA
The Seven said:
Thank you but the twrp touch isnt working Should i flash it with orginal firmware ! and then wait for OTA
Click to expand...
Click to collapse
Either flash twrp via fastboot and flash CM12.
Or flash your stock KitKat and wait for LP OTA.
Its totally your choice if you want to remain on stock or continue with custom ROM.
I just got the MM update warning on my V10. Currently using Stock, debloated, rooted ROM. I'm thinking I want to upgrade to stock MM 6.0. I tried the install but it rebooted into the customs recovery. How can I get the MM upgrade to work from the custom ROM I am on?
JDE100 said:
I just got the MM update warning on my V10. Currently using Stock, debloated, rooted ROM. I'm thinking I want to upgrade to stock MM 6.0. I tried the install but it rebooted into the customs recovery. How can I get the MM upgrade to work from the custom ROM I am on?
Click to expand...
Click to collapse
First you'll need a new recovery TWRP 3.0.2
Second - You'll need to delete the ota update because once you "accidentally" install it you'll cry that you cant root and want to downgrade back to LP.
C. Go to the Dev section and Download the Rom that was built using the ota i just told you to delete. You'll be much happier with a Rom rather than a OTA update thats non-rootable.
Oh..theres also multiple threads regarding the ota.. Doing a simple search wouldve made things a lot easier.
Heres the link to the MM T-Mobile H901 V20E Rom.
http://forum.xda-developers.com/showthread.php?t=3360240
Double0EK said:
First you'll need a new recovery TWRP 3.0.2
Second - You'll need to delete the ota update because once you "accidentally" install it you'll cry that you cant root and want to downgrade back to LP.
C. Go to the Dev section and Download the Rom that was built using the ota i just told you to delete. You'll be much happier with a Rom rather than a OTA update thats non-rootable.
Oh..theres also multiple threads regarding the ota.. Doing a simple search wouldve made things a lot easier.
Heres the link to the MM T-Mobile H901 V20E Rom.
http://forum.xda-developers.com/showthread.php?t=3360240
Click to expand...
Click to collapse
Thank You Sir.
But I just want to confirm. (I'm new to the threads i just got the V10 a few days ago) Im stock rooted with 2 tmo system apps uninstalled
Can I follow your link for step by step update to rooted MM 6.0?
S-C said:
Thank You Sir.
But I just want to confirm. (I'm new to the threads i just got the V10 a few days ago) Im stock rooted with 2 tmo system apps uninstalled
Can I follow your link for step by step update to rooted MM 6.0?
Click to expand...
Click to collapse
Well the OP of the link I posted updated his 1st post. But since you're rooted you should just be able to follow the instructions.
1. Update your recovery to TWRP 3.0.2 (GROGG's build)
2. Download the Rom. Its a 2 part Download. So you'll need Part 1 and Part2 build 005
Dont flash anything until youre certain your recovery is 3.0.2 otherwise you might end up bricking or certain partitions might not be flashed.
If anything read the link OP a few times.
Double0EK said:
Well the OP of the link I posted updated his 1st post. But since you're rooted you should just be able to follow the instructions.
1. Update your recovery to TWRP 3.0.2 (GROGG's build)
2. Download the Rom. Its a 2 part Download. So you'll need Part 1 and Part2 build 005
Dont flash anything until youre certain your recovery is 3.0.2 otherwise you might end up bricking or certain partitions might not be flashed.
If anything read the link OP a few times.
Click to expand...
Click to collapse
Thanks, much appreciated.