Related
i've just bought a second hand xperia x10 from someone who is somewhat of a phoneconsumer, he had only just bought it and then when the iphone 4 was available he wanted that one instead. so i got it quite cheap. i'm not sure if i did a good buy here, and i am totally new to android phones. so i have a couple questions. the only thing i bought was the phone itself, the battery and the micro usb with charger and car charger. he said he didn't think he had the rest for it anylonger not even the box that it came in just the receipt.
now my main question is this, i've been reccommended to format, or reset the phone. is this necessary? and if so, why?
i'm guessing there would be a cd or something following the phone with the operator system on it, but I don't have any cd, so will i even be able to reset it without any software backups?
Reset the phone is done to remove any old contacts, SMS, MMS etc.
Probably a good idea if you don't want to keep info of your friends activities.
The phone is NOT delivered with any CD's, at least not mine.
SE PC Companion will start when you plug in your phone to your windows computer using the USB cable.
It can be used for updating the phones software (firmware) and other tasks.
Other software, SE Update Service for example, can be downloaded from SE web site.
I just got a new T-Mobile Samsung Vibrant. Running 2.1 Froyo Update 1, on JI6 modem and 2.6.29 kernel. Stock unrooted so far.
When I plug in my Samsung Vibrant into my Windows 7 64bit Machine, it is not being detected by Windows Explorer. I installed Samsung's Kies Mini and to STILL not being detected by the program. I installed 64 bit drivers and nothing. I've tried a combination of setting under USB settings Samsung Kies, Media Player, Mass Storage and Ask on Connection. None of them work.
I enabled/disabled USB Debugging in combination with some of the usb settings. I've disconnected and tried every single USB port on the back of my motherboard. I've reset the phone, and my computer. NOTHING WORKS. If someone can point me in the right direction if would be GREATLY appreciated. This is my first android phone and so far its not going so well....Will give THANKS to anyone who helps. What my main goal is to wipe the phone clean, and install a 2.2 rom on it or even Vanilla 2.2 With Root. Still new to this stuff....
Have you gone to the samsung website and downloaded/installed the drivers for your phone?
Here's a link for within XDA that has both the 64 and the 32 bit drivers
http://forum.xda-developers.com/showthread.php?t=728929
I think my issue is my LG Data cable. I've read around and apparently I need a Samsung Certifed USB Data Cable?
Edit: And yes I got the EXACT same drivers off the Softpedia page. Gonna reinstall for a another try but I'm 100% sure its my gimpy USB Cable.
Ah. I suppose that's possible as well. It's the same with car charger sometimes too. If it isn't setup with the exact same pins that your phone has then it won't work. So, even if the connectors look identical, apparently they're not.
Ah. I suppose that's possible as well. It's the same with car charger sometimes too. If it isn't setup with the exact same pins that your phone has then it won't work. So, even if the connectors look identical, apparently they're not.
You need a samsung certified data cable.
The pins look the same, but they aren't. Once you get the cable (I'm sure it's not more then $5), it should work. If you have T-Mobile around you (you have canada, so go to the provider that offers the equivalent of the Vibrant), ask to buy a "SAMSUNG CERTIFIED DATA CABLE". Nothing else.
Ordered one off of ebay should be arriving shortly. Hopefully this fixes my problems.
Same Problem
I'm having almost the same issue. However, rather than not being recognized by Windows, it tells me that there's a problem with the driver. And that's after I reinstalled Samsung's driver.
I'm not sure if the problem is with the phone, or with the cable, or with my computer. I'll try again at work on Monday.
In the meantime, assuming the problem is with the phone, how do I hard reset the phone, wiping the Samsung update, etc.? If I do so, will the Android Store know that I purchased all my apps, or will I have to buy them again?
And what backup program do you recommend for copying all my user data to my micro-SC card so that I don't loose everything.
Used my old BB cable and voila. Thanks for the help guys it was the USB cable indeed.
I recently picked up a secondhand Fascinate for my father and have a desire to root it and flash CM for him. Unfortunately, I've run into a roadblock right off the bat: I cannot connect my computer to the phone via USB. The phone only recognizes it as a charger.
The phone is vanilla and is at latest firmware.
The cables I've tried are LG cables from my own phone.
The computer is Win7 64-bit and has Samsung drivers installed.
Help?
EDIT:
Derp. Perhaps the issue is the cable. I've ordered an OEM cable to test this theory. Thoughts?
Cable could be the issue, I know it has been for some that have used after market USB/data cables. Worth trying in order to rule it out.
I would also strongly suggest using Droidstyles guide. Look in General section. Also, on my device, I sometimes have to "jiggle" the connection to the phone. Sounds odd but it works. You will know right away, pull battery and with ODIN open, plug phone in. Should show up in YELLOW.
Sent from my SCH-I500 using XDA App
Ronjoe said:
I recently picked up a secondhand Fascinate for my father and have a desire to root it and flash CM for him. Unfortunately, I've run into a roadblock right off the bat: I cannot connect my computer to the phone via USB. The phone only recognizes it as a charger.
The phone is vanilla and is at latest firmware.
The cables I've tried are LG cables from my own phone.
The computer is Win7 64-bit and has Samsung drivers installed.
Help?
EDIT:
Derp. Perhaps the issue is the cable. I've ordered an OEM cable to test this theory. Thoughts?
Click to expand...
Click to collapse
Ouch, you may be in a jam. I bought a Fascinate on craigslist. I went home, and fired up Heimdall to install CWM [for cm7], and I got "No device found."
It was charging, but that was all. It would do nothing else. I did get it to connect just a few times, after cleaning the USB connector with a small brush [It was a dental brush actually ]. But it clammed up on me again.
I called up Samsung, they said "You need to have the OEM cable. If it's still not working with the OEM cable we will set up a repair." So I went on amazon and bought the cheapest OEM cable I could find [I think it was $2 or $3, it's OEM samsung, but it's shorter than I thought. :-S ]
I was lucky enough to have 1 month left on the warranty. Unfortunately, you might not be so lucky.
After the repair, my USB worked fine. But then, every morning, I would wake my phone up and it would be in a frozen state. [with about 1 frames per second on the Screen-on animation]
I sent it in again, they replaced the main board, and I have not had any problems since.
If you don't have any warranty [there is a 1-year warranty from the date of purchase], I really hope the OEM cable will work for you. If you're out of warranty, the the OEM cable doesn't work, I guess you might try cleaning the port with a brush, maybe you'll get lucky!
Gl
I've received the replacement cable and it seems to be working. My question is answered.
As a side question, what modifications you guys recommend for the phone in terms of stability and speed? Experience tells me to go for CM7 and CWM, but this phone's developer forum is quite a mess, with different variations of both.
I'd recommend either makelegs' CM7 kangs (in the dev section), or teamhacksung's ICS (find it at rootzwiki). Droidstyle's guide in the general section will get you up and running regardless of what rom you want to go for.
Thanks, k_niv, I've decided to go with makelegs's build. The ICS rom seems a bit... fresh. Keep in mind, this is actually for my father, who doesn't need to be dealing with bugs. He just wants his phone to work the way Android should: fast and Bingfree.
(I'm quite happy with my LG VS910, Gingervolt'd, but don't get me wrong, the Fascinate is damn nice for a year-old phone)
Thanks for the prompt help, my expectations were exceeded on this forum.
My I777 has been acting up lately, and now I'm out of options and wondering what my next move should be.
For several days when I'd connect the phone to the PC via USB, it started saying "this device can perform faster when on a USB 2.0 port..." - which, my ports ARE 2.0.. transfers were taking forever. Now, anytime I plug it in it simply says "USB Device not recognized" - I've tried the OEM cable, the plethora of other cables, 4 different PC's... *ALL* have the same result.
My concern is with a custom ROM on it and no way to get any PC to recognize the phone to get it back to root - how should I proceed from here for warranty purposes? I've only had it since March - just wondering what's gonna happen at this point - or is this even fixable? All the threads I've seen say it needs replaced... but with no way to unroot, etc., I'm just unsure how this is gonna go.
Thanks for any advice.
Midnight1970 said:
My I777 has been acting up lately, and now I'm out of options and wondering what my next move should be.
For several days when I'd connect the phone to the PC via USB, it started saying "this device can perform faster when on a USB 2.0 port..." - which, my ports ARE 2.0.. transfers were taking forever. Now, anytime I plug it in it simply says "USB Device not recognized" - I've tried the OEM cable, the plethora of other cables, 4 different PC's... *ALL* have the same result.
My concern is with a custom ROM on it and no way to get any PC to recognize the phone to get it back to root - how should I proceed from here for warranty purposes? I've only had it since March - just wondering what's gonna happen at this point - or is this even fixable? All the threads I've seen say it needs replaced... but with no way to unroot, etc., I'm just unsure how this is gonna go.
Thanks for any advice.
Click to expand...
Click to collapse
You didn't use Rom Manager ever did you? Please say no
Have you tried re-installing Kies to get the drivers working again?
Then you can: - http://forum.xda-developers.com/showthread.php?t=1313659
Midnight1970 said:
My I777 has been acting up lately, and now I'm out of options and wondering what my next move should be.
For several days when I'd connect the phone to the PC via USB, it started saying "this device can perform faster when on a USB 2.0 port..." - which, my ports ARE 2.0.. transfers were taking forever. Now, anytime I plug it in it simply says "USB Device not recognized" - I've tried the OEM cable, the plethora of other cables, 4 different PC's... *ALL* have the same result.
My concern is with a custom ROM on it and no way to get any PC to recognize the phone to get it back to root - how should I proceed from here for warranty purposes? I've only had it since March - just wondering what's gonna happen at this point - or is this even fixable? All the threads I've seen say it needs replaced... but with no way to unroot, etc., I'm just unsure how this is gonna go.
Thanks for any advice.
Click to expand...
Click to collapse
You can always use Mobile Odin to flash back to stock since your on a custom ROM.
jthatch12 said:
You didn't use Rom Manager ever did you? Please say no
Click to expand...
Click to collapse
Absolutely NOT.
This is a situation that's been coming over a period of time, starting with the inability to see it as a USB 2.0 device when initially plugged in, and now has deteriorated to the point that it can't even be seen.
Ruger20 said:
Have you tried re-installing Kies to get the drivers working again?
Then you can: - http://forum.xda-developers.com/showthread.php?t=1313659
Click to expand...
Click to collapse
Yeah, I sure did - nothing. Even in recovery, it won't "mount" usb there either.
Samsung's have a crappy USB port. It fails sometimes. You have a hard time charging at all?
But like I stated above, even without a computer connection you can get Mobile Odin and flash back to stock, as long as your rooted.
I'm having this same issue. I just got the phone earlier this week and I am unable to get bit connected to my pc to root or Odin. I have installed and uninstalled Kies multiple times on two different computers, tries different ports, and checked if the cable worked by using another phone (PC recognized without an issue). I get the USB not recognized or the 2.0 USB message. If I enable debugging, I can connect regularly and transfer files through windows explorer. But if I use USB debugging off, then nothing will work. I've tried using odin and it will just get stuck at setup connection or cache.img and then I'd have to pull the device. I've tries updating through Kies when it shows the USB 2.0 message but once the S2 hits download mode then the computer stops recognizing it. I have also tried installing the i777 drovers on the Samsung website and its still a no go. Does anyone know how to fix this? Its not rooted so mobile Odin won't help me now.
Sent from my Samsung Infuse on CM10 using Tapatalk
Uninstall drivers, reboot, install updated ones, reboot, Clean USB ports on your phone and computer, clean the cable, Replace usb cable, replace the actual lower dock connector PCB. -> http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=140663430775&ssPageName=ADME:X:RTQ:GB:1123
There are about a billion things you can do. I've replaced mine at least twice, I swear that part is designed to fail after a few months. I ordered one for my GF's i777 and it should be here soon, can't wait to fix it! I hate having broken sh_t.
allyourbase said:
Uninstall drivers, reboot, install updated ones, reboot, Clean USB ports on your phone and computer, clean the cable, Replace usb cable, replace the actual lower dock connector PCB. -> http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=140663430775&ssPageName=ADME:X:RTQ:GB:1123
There are about a billion things you can do. I've replaced mine at least twice, I swear that part is designed to fail after a few months. I ordered one for my GF's i777 and it should be here soon, can't wait to fix it! I hate having broken sh_t.
Click to expand...
Click to collapse
Yes. USB cables go bad often, especially these crappy micro B connectors.
allyourbase said:
Uninstall drivers, reboot, install updated ones, reboot, Clean USB ports on your phone and computer, clean the cable, Replace usb cable, replace the actual lower dock connector PCB. -> http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=140663430775&ssPageName=ADME:X:RTQ:GB:1123
There are about a billion things you can do. I've replaced mine at least twice, I swear that part is designed to fail after a few months. I ordered one for my GF's i777 and it should be here soon, can't wait to fix it! I hate having broken sh_t.
Click to expand...
Click to collapse
It is the OEM cable that came with my Samsung Infuse. It worked with the T989 3 days ago and it's not working with my i777. Its strange because I tried it with my infuse again and I am able to Odin just fine. Could it really be an issue with my USB or will it be a PCB issue? I would rather or not disassemble my phone if it is a PCB issue. Should be able to do a warranty exchange though.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
DangKid said:
It is the OEM cable that came with my Samsung Infuse. It worked with the T989 3 days ago and it's not working with my i777. Its strange because I tried it with my infuse again and I am able to Odin just fine. Could it really be an issue with my USB or will it be a PCB issue? I would rather or not disassemble my phone if it is a PCB issue. Should be able to do a warranty exchange though.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
I hate to break it to you brother but it's damn near impossible to determine what the actual culprit could be, your best best is to try each and every single different thing I've listed. The end result being changing the PCB which one, isn't that hard, and two, is very cheap the only problem is waiting for the board to come in the mail.
allyourbase said:
I hate to break it to you brother but it's damn near impossible to determine what the actual culprit could be, your best best is to try each and every single different thing I've listed. The end result being changing the PCB which one, isn't that hard, and two, is very cheap the only problem is waiting for the board to come in the mail.
Click to expand...
Click to collapse
I understand, which is why I'm hoping that by posting my story up, someone who has experienced the same problem can help. If not, then I can get others' opinion on it and when the issue is fixed, the solution will be available for future users.
Sent from my Samsung Infuse on ParanoidDroid using Tapatalk
Its the usb board on your phone.
I have the same problem so now I have to get mine changed too.
I've soft bricked my phone 2 times with this problem and it takes hours to get Odin to pick up my phone.
Swap the faulty chip and you should be good.
transmitted from the Dark Obelisk
Noz85 said:
Its the usb board on your phone.
I have the same problem so now I have to get mine changed too.
I've soft bricked my phone 2 times with this problem and it takes hours to get Odin to pick up my phone.
Swap the faulty chip and you should be good.
transmitted from the Dark Obelisk
Click to expand...
Click to collapse
Its strange because when I enable USB debugging, I can get a "USB connection" on the phone and data transfers fine. But when I turn it off, I get a "MTP connection" and sometimes it'll connect (5% of the time) and allow me to transfer data. But when lies tries to update when that mtp connection is active, it'll hang when the phone goes into download mode. Did you have this same issue?
Sent from my Samsung Infuse on ParanoidDroid using Tapatalk
DangKid said:
Its strange because when I enable USB debugging, I can get a "USB connection" on the phone and data transfers fine. But when I turn it off, I get a "MTP connection" and sometimes it'll connect (5% of the time) and allow me to transfer data. But when lies tries to update when that mtp connection is active, it'll hang when the phone goes into download mode. Did you have this same issue?
Sent from my Samsung Infuse on ParanoidDroid using Tapatalk
Click to expand...
Click to collapse
I f you're able to transfer files via mass storage with USB debugging enabled then you can (most likely) rule out hardware failure on your phone.
If anything this sounds like a driver issue on the cpmputer. Are you running windows? If so remove and reinstall the drivers for your phone.
Still think its hardware.
I can connect 1/100 of the times I'm plugged into a computer. Its not a driver issue because my girlfriend has an i777 as well and no problems for her connecting at all.
Its not ROM related because I have this problem with all ROMs.
transmitted from the Dark Obelisk
Noz85 said:
Still think its hardware.
I can connect 1/100 of the times I'm plugged into a computer. Its not a driver issue because my girlfriend has an i777 as well and no problems for her connecting at all.
Its not ROM related because I have this problem with all ROMs.
transmitted from the Dark Obelisk
Click to expand...
Click to collapse
Does that apply to ums as well? From his description he can connect in ums just fine. Its only mtp that's giving him problems. In his case, with the problem only being in one connection mode, it leads me to think drivers. In your case, tested against another s2 I'd say hardware.
Just tried using a Motorola cable and a third PC and my chances of connection increased to about 15-20%. Kies and Odin failed on me a few times just like I had described before. But eventually Odin was able to flash okay. Finally on ICS on my i777! I think I'll stay on stock since I'd rather not go USB and PC hunting to flash stock if anything goes wrong.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
DangKid said:
Just tried using a Motorola cable and a third PC and my chances of connection increased to about 15-20%. Kies and Odin failed on me a few times just like I had described before. But eventually Odin was able to flash okay. Finally on ICS on my i777! I think I'll stay on stock since I'd rather not go USB and PC hunting to flash stock if anything goes wrong.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Good to hear you got it working BUT do note if you flashed the stock ICS be aware of the eMMC SUPERBRICK BUG you should read up on the issues here is a link to some info on it......
http://forum.xda-developers.com/showthread.php?t=1746181
Hi all. I couldn't find a specific forum for my SII HD LTE (Bell Canada version - i757m) so I'm posting in here with hopes that someone can help me out.
My USB port appears to be toast. The phone will charge, but it not recognized by any computer I plug it in to. I've tested in with Odin on two machines with several cables in download mode, USB debugging mode with the SDK, and mass storage mode. The fact that it won't even get detected in download mode leads me to believe that it's a hardware issue. Is this common?
Edit: Tried to post a link but I'm too much of an XDA posting noob to do so (<10 posts)
Is this the same device / would it be compatible? It's only 10 bucks but I'd like to know if there is anything else I can try or any known issues / fixes for this problem.
Any advice would be great!
Thanks.
Have you tried to clean the port. That's a problem. Or mobile Odin if you want to flash some thing. Have you tried dif version of Odin?
That's a problem too.
andrewwright said:
Have you tried to clean the port. That's a problem. Or mobile Odin if you want to flash some thing. Have you tried dif version of Odin?
That's a problem too.
Click to expand...
Click to collapse
I've tried cleaning the port with a clean dry toothbrush as suggested for some other models without any luck. I've also used a version of Odin that I know worked on the phone a month or so ago so there's definitely something wrong on the phone's end of things. Since it's failing to get detected in download mode (before anything is really loaded) I'm almost positive it's a hardware problem - unless there is some obscure software issue that may be causing this.
I'm not using any custom ROMs at the moment and it just stopped working out of the blue.
Fairly certain I'm going to have to replace the actual hardware piece. I looked in it with a flashlight and everything looks clear / contacts are all in-place so I'm guessing something may have fried on the pcb that it's attached to. Possibly a short or something?
I've run into the identical problem.
It's quite an issue actually, because the stock experience is becoming really unbearable, and I can't find a way to root or install a custom Rom without USB.
Any solution?
I actually sourced the part for about 10 bucks on Ebay. Just arrived a few days ago. It includes the whole circuit board, ribbon cable, and USB plug. There's gonna be some disassembly required (obviously) but after testing every software solution in the book, cleaning the ever living crap out of it, and trying four different cables on multiple PCs, I'm positive the USB port / attached hardware bit the dust.
I'll post my results when I get around to putting the thing in.