From everything I have been seeing and reading there is no custom recovery for the Verizon brand of the edge 6. I have been searching high and low and I can't find the stock recovery to load into it. I can only get into the download mode. I tried to reload stock firmware for my model and just keep getting the boot loop. Thanks in advance for any ideas.
I have tried to download a new set of recovery firmware but it still gets stuck in the boot loop. It seems like the phone will not boot until the recovery is fixed.
startreker said:
I have tried to download a new set of recovery firmware but it still gets stuck in the boot loop. It seems like the phone will not boot until the recovery is fixed.
Click to expand...
Click to collapse
When flashing the stock firmware, part of the flashing process is to flash the stock recovery. So when you flash stock firmware does it pass in Odin?
Related
Edit: This was solved by reflashing cf-root, which restored both recovery and cache to safe versions. Now I need to boot into recovery with Home+VolumeUp+Power and restore a backup.
I was flashing and testing new versions of clockwork recovery (using Heimdall, not Odin). Now the phone is stuck on the boot screen (it doesn't play the audio or get to the boot animation). I can still boot into download mode, but I can't boot to recovery. I've flashed other versions of recovery, including versions that I know are good. I've pulled the battery. What can I do to get my phone back? I don't think I've done anything besides back up the system and flash a new recovery image!
Anybody know what to do? Next thing I can think of is flashing CF-root again, but that seems dangerous if there might be a better way.
Thanks!
Hi
tried to reboot into recovery as i usually do, but for some reason it bootloops into recovery.
The only thing i can do is boot into download mode, tried to flash a new recovery through odin, Odin says success but
when i try to restart it still bootloops into recovery and immediately keeps bootlooping?????
i did have the latest CWM 6.0.4.4. but it now seems corrupted somehow, Now im stuck. Any ideas.
cheers
Faqs and guides and multiple bootloop posts read/ search .
Suggest you use Philz recovery as CWM is outdated .
jock11 said:
Hi
tried to reboot into recovery as i usually do, but for some reason it bootloops into recovery.
The only thing i can do is boot into download mode, tried to flash a new recovery through odin, Odin says success but
when i try to restart it still bootloops into recovery and immediately keeps bootlooping?????
i did have the latest CWM 6.0.4.4. but it now seems corrupted somehow, Now im stuck. Any ideas.
cheers
Click to expand...
Click to collapse
Go into download mode and Flash the stock ROM from www.sammobile.com in Odin first. Then root and flash the recovery again.
So recently i tried to update my twrp recovery and i used goomanager on my phone and i think i used the wrong file because after that file was flashed i can no longer get into recovery mode. Every time i get in to recovery mode it show in the top left recovery mode and then goes into a bootloop and repeats that even taking the battery out cant fix this because when you turn it on it does the same thing...i fixed this by going into odin and flashing cwm recovery md5 file which i assumed would replace the recovery on my phone...but it didnt and i no longer go into recovery mode or flash roms. I would appreciate any help on this if I can fix this problem somehow or if there are other ways to flash roms...i have been looking for ways to flash roms using odin.....Thank You
lol does anyone know what to do?
aethlive said:
So recently i tried to update my twrp recovery and i used goomanager on my phone and i think i used the wrong file because after that file was flashed i can no longer get into recovery mode. Every time i get in to recovery mode it show in the top left recovery mode and then goes into a bootloop and repeats that even taking the battery out cant fix this because when you turn it on it does the same thing...i fixed this by going into odin and flashing cwm recovery md5 file which i assumed would replace the recovery on my phone...but it didnt and i no longer go into recovery mode or flash roms. I would appreciate any help on this if I can fix this problem somehow or if there are other ways to flash roms...i have been looking for ways to flash roms using odin.....Thank You
Click to expand...
Click to collapse
First mention your device name and ROM flashing methods differ with devices and you cannot flash any custom ROM with odin
just got same issue. note 3 sprint variant
i flashed twrp through odin and seems fine now.
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
scarface195894 said:
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
Click to expand...
Click to collapse
Pull battery let it sit for two minutes. Push menu button, volume down button, and power button at the same time boot into download mode. once there flash a fresh copy of your OS which ever version of KitKat your running. You lose all your personal data, but your beyond that now. Then here is link to my thread should answer all your questions http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 enjoy !!!
uknow said:
Yeah ive said it a few times this should not be used
If youve bricked your phone you can get back into your phone by holding volume down menu botton and power botton at the same time when it pops up the warning screen to enter download mode hit cancel your phone will then boot up after your phone is on if you do not have a computer the way you fix the phone so you dont have to do this every time your phone is off you need mobile odin and a kitkat cwm.img.tar for our phone flash it and problem solved you can now boot into cwm recovery then if you want you can flash a twrp img zip through cwm or just keep cwm hope this helps
Ps if you Google mobile odin the dev gives it away on his xda mobile odin page
Click to expand...
Click to collapse
.............^^^^^^...........
stuck in recovery loop also
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
update-- i found an updated version of the philz tar file and installed it with odin and that got me out of the loop..just havent tried to get back into recovery yet...lol
Cat1970 said:
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
Click to expand...
Click to collapse
First, pull the battery for a minute then reinstall hold the power, menu, and volume down buttons at the same time and boot into download mode. The version of Phil'z CWM you flashed is to old for 4.4.4 NK4. Now download to your desktop the right Philz CWM recovery file (Phil'z_Touch_6.48.4-hlte.tar.md5 ) here is the link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/hlte/ there are two listed use the second one. Flash with odin and you should be good to go. Go to my thread http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 for more info.
done exactly as you said and the same screen came up saying recovery is not seandroid enforcing and then it jumps to Philz Touch 6 so im assuming everything is right now...i really appreciate the help! tyvm
different rom
ok..i installed cyanogen rom..i also used titanium backup..i want to go back to where i was but i dont see titanium backup on there anymore..how do i revert back?
i guess i need to update my phone n900p (help)
my rooted note 3 was running 5.0 L so i tried flashing a custom recovery both TWR and CWM now its stuck in boot loop. i read all the post showing you how to get out the bootloop. how ever i still need to put a recovery on my phone are there any updated links for this with odin because i was using the odin 3.0 sorry odin 307
My S3 was working fine and then a few days ago it just shut off out of no where and now I can't boot into my OS. It will only boot into download mode so I tried a firmware flash through Odin and it was successful but I still can't boot up but now I can boot into stock recovery and download mode. Any suggestions on how to fix this?
JamesB3 said:
My S3 was working fine and then a few days ago it just shut off out of no where and now I can't boot into my OS. It will only boot into download mode so I tried a firmware flash through Odin and it was successful but I still can't boot up but now I can boot into stock recovery and download mode. Any suggestions on how to fix this?
Click to expand...
Click to collapse
what ROM you were using?.
Factory reset in recovery.
I can't remember exactly what ROM I had on it.
I'll try factory resetting later today to see if it works.