I have followed all the steps in thread: https://forum.xda-developers.com/redmi-note-4/how-to/fastest-to-unlock-bootlader-t3689116
However i'm still getting "Current acc not bound to device" error
Yesterday I bought the Deep Flash cable, follow several guides to boot to EDL, however EDL does not boot.
So Xiaomi have totally blocked to access to EDL mode ?
milogen said:
I have followed all the steps in thread: https://forum.xda-developers.com/redmi-note-4/how-to/fastest-to-unlock-bootlader-t3689116
However i'm still getting "Current acc not bound to device" error
Yesterday I bought the Deep Flash cable, follow several guides to boot to EDL, however EDL does not boot.
So Xiaomi have totally blocked to access to EDL mode ?
Click to expand...
Click to collapse
So for asking , is boot to EDL mode usefull for note 4x?
lawong said:
So for asking , is boot to EDL mode usefull for note 4x?
Click to expand...
Click to collapse
its useful when stucked to the unlock error, really dont know what xiaomi have changed, unlocked 2 redmi note 4x before Oct was okay, now the 3rd unit cant be unlocked, keep on error on "Current account not bound on device"
milogen said:
its useful when stucked to the unlock error, really dont know what xiaomi have changed, unlocked 2 redmi note 4x before Oct was okay, now the 3rd unit cant be unlocked, keep on error on "Current account not bound on device"
Click to expand...
Click to collapse
You mean switch to EDL mode then unlocking the bootloader with replacing the recovery in the original fastboot firmware?
Since Xiaomi remove dfc function from Miui8.2 and above..you can't used anymore.
There is also a edl pin out on the motherboard. Open your back panel, Search for the two point between the fingerprint connector socket and LCD flex socket.
You need to connect those two point while you plug in your USB cable to your PC.
Then your device will be connected in edl mode.
Works everytime
Related
Hello,
I just received my redmi note 3 SD, with globale stable rom...
I wanted to install CM13.
So first, i wanted to install global dev rom to unlock bootloader.
I tried with updater but i have an error.
I tried with fastboot global dev rom and miflash with the tuto but i have always error.
I tried different version of rom and miflash and now my phone is on black screen. I haven't any acces to fastboot mod with start button+volum - or +.... I have only red light and black screen and when i connect phone to pc i see that: Qualcomm HS USB Diagnostics 900E (com10).
Can you help me to unbrick please?
first: u dont unlock the bootloader by flashing global dev rom ... u unlock the bootloader by either request official unlock and using the official xiaomi unlock tool or use the inoffiial method.
is the red light flashing? maybe youre in EDL mode? then u can flash the whole rom
I have one redmi note 3...unlocked with cm13 since june... i did all myself.
The new redmi note 3 with problem is for my father, i formatted my PC so i reinstalled all soft yesterday. I know how to unlock bootloader but i think i must be with rom global dev...
i think i'm not in EDL mode because when i refresh in miflash, i can't see my phone. Before, when i was in EDL mode, my phone was detected by miflash...
I have the red light ....
I see a solution is to remove backpanel, and remove the battery to reset the phone but i'm afraid to do this...
Thanks to help me
kevin761 said:
I have one redmi note 3...unlocked with cm13 since june... i did all myself.
The new redmi note 3 with problem is for my father, i formatted my PC so i reinstalled all soft yesterday. I know how to unlock bootloader but i think i must be with rom global dev...
i think i'm not in EDL mode because when i refresh in miflash, i can't see my phone. Before, when i was in EDL mode, my phone was detected by miflash...
I have the red light ....
I see a solution is to remove backpanel, and remove the battery to reset the phone but i'm afraid to do this...
Thanks to help me
Click to expand...
Click to collapse
you don't have to be on global dev rom to unlock bootloader, i unlocked mine officially on global stable rom
I have opened the back panel, disassemble motherboard and push the 2 pins... After, my device was detected as Qualcomm 2008 and not 900E and it was detected into miflash old version...
I tried to flash the last fastboot globale stable rom but i had an error " max buffer sector is 256"... And my phone came back to Qualcomm 900E in the windows 10 settings... And it's now not detected by miflash... I need to unmount again and touch the 2 pins on motherboard...
After what i can do to flash a rom correctly?? I don't understand why i have always an error...
Use newest version miflash on windows 10. Make sure it's plugged into USB 2.0 port.
Hello,
Problem solved... I disassemble a second time the phone, i pushed the 2 pins on the motherboard.
I did the same as this tuto: http://en.miui.com/thread-245347-1-1.html
At the middle of the tuto, i don't understand why but my phone turn on with logo "Mi" at boot!!! And the phone boot correctly...
On my PC, I have unistalled all programs and reinstalled all,.. After, i have installed ROM Global dev>Unlock BL> Install TWRP>Install CM13>Install Gapps... And now the phone works fine!!!
Thanks!
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Kicroy said:
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Click to expand...
Click to collapse
I have the similar problem with my Redmi3. The Fastboot screen is the only screen that I can get now. Let me know if you have answer. Thanks.
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
EDL mode allows flashing with locked bootloader. Some models have this mode locked, but I think that is not the case with Redmi 3.
Kicroy said:
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
Click to expand...
Click to collapse
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
jokerpappu said:
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
Click to expand...
Click to collapse
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
geuthym said:
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
Click to expand...
Click to collapse
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
jokerpappu said:
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
Click to expand...
Click to collapse
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
geuthym said:
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
Click to expand...
Click to collapse
try flashing official global rom then see if the problem still persists or not
Hey! I am back with some news of my friend!
He tried to run the EDL mode but when he does that the phone simply goes into the bootloop again... He asked a vendor from Aliexpress to get a french rom, is there a way that the phone doesn't have EDL because of the rom or something like that? I mean is EDL a hardware-thing or a software-thing
same problem
cukru said:
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
Click to expand...
Click to collapse
I have same problem, but this way is not work, because bootloader is locked. Im forget for replacing recovery.img in update package with twrp.
I had this problem before few monthes
my solution was to "force" putting this device on EDL mode
I clicked on vol up + vol down + power together and got into EDL mode, then miflash it.
google - xiaomi understanding download mode
it will send you into miui forum
then second method, download mode, it is what I've described
Hi everyone,
I have Xiaomi Redmi Note 4, and when I using him, hes gone. Nothing work, no fastboot, no twrp, only Red led when i charge battery.
And i want to flash miui global in MiFlash and... I have error PING TARGET VIA FIREHOSE.
Guys please help me, I tried in 6 miui globals, china, any MiFlash version(Beta,2014,2015,2016) and dont work
Have a nice day.
P.S I have Qualcomm HS-USB QDLoader 9008 (COM3)
Try to flash in edl mode... For this you have an authorized mi account
I got same issue some time before just remove the battery connector after that connect the phone with pc (WITHOUT BATTERY CONNECT) flash again using miflash tool
ismail.ahmed84 said:
I got same issue some time before just remove the battery connector after that connect the phone with pc (WITHOUT BATTERY CONNECT) flash again using miflash tool
Click to expand...
Click to collapse
I tried IT and dont work
anil5462 said:
Try to flash in edl mode... For this you have an authorized mi account
Click to expand...
Click to collapse
I flashed on edl and dont work
i experienced same issue before and nobody in XDA cant fix this (or wont bother to reply,, idk)
try test point method. if it doesn't work, i'm afraid that you have broken hardware. you have to replace it
anil5462 said:
Try to flash in edl mode... For this you have an authorized mi account
Click to expand...
Click to collapse
rs168 said:
i experienced same issue before and nobody in XDA cant fix this (or wont bother to reply,, idk)
try test point method. if it doesn't work, i'm afraid that you have broken hardware. you have to replace it
Click to expand...
Click to collapse
I tried testpoint and always have error writing on Device in miflash
Snajper322 said:
I tried testpoint and always have error writing on Device in miflash
Click to expand...
Click to collapse
okay .. too bad you should replace your device, or you can find a good mechanic to replace some broken parts. it usually works
did you drop it?
or it happened during installing rom or something?
How does it happened please tell us.
Charge it overnight
Hold the power button 20-30 seconds the next day
Boot the device in fast boot mode by holding volume down+power button. Then go to MiFlash and flash fastboot redmi note 4 rom in edl mode(Unlock bootloader by running the last script file and then proceed to do the following steps). Download stock fastboot rom for redmi note 4 from official mi website(Note: The stock fastboot rom is different from stock recovery rom). While flashing the rom, below you have the option to choose three modes, click clean all and lock. Flash this rom and you're device will be working in no time. Make sure your device has adequate battery
Hello everyone. Comrades, please help. I do not know what to do anymore, I accidentally reset all the phone settings to zero, and now I can not unlock the phone, because the connection stopped working (the modem firmware has flown off), the bootloader is locked, through Mi Flash I do not want to authorize at all, I tried resetting the password, not nothing helped. For almost a month I have been fighting and not how I can not flash the phone (restore).
Dear comrades, please help, if anyone has Firehouse files, with the ability to bypass authorization in Mi Flash, please share. It's a pity to lose your phone.
EDL mode is difficult to start, you can't normally get into it. MiFlashtool works in both fastboot mode and EDL mode. If you normally use MiFlashtool, it's just a simple fastboot.
EDL mode can be triggered using test points accessible from inside the phone, located on the motherboard. For some devices it was also possible to use a USB cable. Which test points to use, or whether the EDL cable for the RN10 also works, I don't know yet.
However, EDL mode is definitely still an option before throwing your phone away.
you can try it if it serves you excellent but let me know
unzip it
I installed miflash tool Windows 7 can't open
Thieuu1996 said:
I installed miflash tool Windows 7 can't open
Click to expand...
Click to collapse
Where did you get the installation file and what version of MiFlash is it?
I have a redmi note 4 or 4x cant remember which exactly and its stuck in a bootloop. I open the phone in fastboot mode but my pc doesnt recognize it i think. The phone hasnt been oem unlocked and usb debugging isnt enabled from what i remember.
I would like to recover the photos that are inside the phone and dont really care about the other stuff. Preferably if i can recover the photos id flash a custom rom.
What are my options?
If your device doesn't have bootloader unlocked then I would recommend to go straight to the Xiaomi service. I don't remember how about older devices like Redmi Note 4, but usually unlocking bootloader results in wiping data
Use Mi Flash Pro - https://miflashpro.com/. And do the flash on the "Recovery" tab. All you will need is to download the ROM for "Recovery", not for OTA or Fastboot!
Jerry Jorts said:
I have a redmi note 4 or 4x cant remember which exactly and its stuck in a bootloop. I open the phone in fastboot mode but my pc doesnt recognize it i think. The phone hasnt been oem unlocked and usb debugging isnt enabled from what i remember.
I would like to recover the photos that are inside the phone and dont really care about the other stuff. Preferably if i can recover the photos id flash a custom rom.
What are my options?
Click to expand...
Click to collapse
嗨 我想它解锁不需要格式化 你可以看看