Related
Hi there guys!
My Xiaomi Hongmi S1 couldn't pass the boot phase after me trying to install Xposed. Then, the software Mi Phone Manager tried to recover the system files with the phone in fastboot (in this phase I still could enter fastboot and recovery) - somewhere along this process I had to leave and, when I came back, I had an error message in the software and the phone was turned off. After this I could not turn the phone on anymore, not even into fastboot or recovery.
MiFlash detects the phone even like this, but is unable to flash things into it.
PLEASE, HELP ME!
Someone?
Go in fastboot to pc
(you probably see anything on your phone)
On PC you can see if you are in fastboot by
Klicking on Refresh button on MiFlash you will see that you are connected
And Flash stock rom
See On thread (1)
(Also See MiFlash Picture from Thread)
Link: forum.xda-developers.com/showthread.php?p=53594673#post53594673
If that fails, your phone is probably broken.
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Kicroy said:
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Click to expand...
Click to collapse
I have the similar problem with my Redmi3. The Fastboot screen is the only screen that I can get now. Let me know if you have answer. Thanks.
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
EDL mode allows flashing with locked bootloader. Some models have this mode locked, but I think that is not the case with Redmi 3.
Kicroy said:
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
Click to expand...
Click to collapse
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
jokerpappu said:
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
Click to expand...
Click to collapse
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
geuthym said:
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
Click to expand...
Click to collapse
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
jokerpappu said:
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
Click to expand...
Click to collapse
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
geuthym said:
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
Click to expand...
Click to collapse
try flashing official global rom then see if the problem still persists or not
Hey! I am back with some news of my friend!
He tried to run the EDL mode but when he does that the phone simply goes into the bootloop again... He asked a vendor from Aliexpress to get a french rom, is there a way that the phone doesn't have EDL because of the rom or something like that? I mean is EDL a hardware-thing or a software-thing
same problem
cukru said:
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
Click to expand...
Click to collapse
I have same problem, but this way is not work, because bootloader is locked. Im forget for replacing recovery.img in update package with twrp.
I had this problem before few monthes
my solution was to "force" putting this device on EDL mode
I clicked on vol up + vol down + power together and got into EDL mode, then miflash it.
google - xiaomi understanding download mode
it will send you into miui forum
then second method, download mode, it is what I've described
Hello to everybody.
Dear friends I post this to guide (only unlocked bootloader rooted phones) you through the steps that I used to succesfully recover my Xiaomi M9T
from a hard brick (by that time only edl mode was available).
Since Xiaomi has decided to lock down their Mi flash tool, and only special authorized accounts have an access to their utility tool.
was almost impossible (by yourself) to recover your phone from a hard brick situation.
I found a way arround to xiaomi tool with a 100% succesfull 1st atempt with my own phone it worked flawlessly.
Forget the point to point jumbers with a required open phone procedure.
Forget the authorized account holders with a teamviewer use of your computer and a fee for their services (logical).
Forget returning back your phone to any authorized repair center for a revival for what ever cost.
Below you will find al the steps one by one.
First thing you need is to install: minimal_adb_fastboot_v1.4.3_setup. https://forum.xda-developers.com/showthread.php?t=2317790.
Run it and put "Y" and hit enter all the way through.
Second you need to install: TOOL_ALL_IN_ONE_2.0.1.1. https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Press tab advance options.
under the advance options window press first the tab Set ADB and fastboot privileges system wide.
It will asc you for confirmation press the tab again with the same Set ADB and fastboot privileges system wide.
Then press the tab Open a free terminal with ADB and fastboot privileges.
and type in the terminal the cmd fastboot oem edl,
It will say ADB boot oem edl OK. (unforunatelly I have no screen print from this one).
You will know at once because your phone goes from fastboot (bunny) screen to black screen and enters edl mode, is normal do not be alarmed.
In your computer you will see now under setting> devices> Qualcomm HS-USB QDLoader 9008. That is a good thing you are now in edl mode.
From there go back to already running all in one tool.
Press the tab Flash Factory images, you will go to the respective screen (below).
Select Flash all, and press the download factory image china.
Immediately will redirect you by a pop up window to the chinese site of the MIUI.
Scroll down and you will come across the Redmi K20 rom, downloaded and save it to your desktop.
Once is done decompress twice from tgz. file, to tar. file, to ready to flash rom file.
Now come back to all in one tool, and select the rom from the browsing tab, go to the desktop folder where you have previously download the roam and select the ready to flash (unzipep file) once is loaded hit flash Rom and seat back.
The ADB terminal will start the flashing procedure you will know from the very beggining if everything is normal,
Because the terminal shows the file is being prossesed and the time for each action with a followed OK
During the procedure it will break up between two or three stages of the flashing, momentarily again do not be alarmed.
If everything goes well the operation will finish with a gorgeous redmi bootup logo.
(once again I apologize no screen shot taken in advance for this step)
It will finally bootup to system, allthough it might not, But one more time do not be worried, officially you have succeded reviving your hard bricked phone.
From there if is not completing bootup simply press volume up+power botton and you have the official recovery, (in chinese of course) but you can easily
find an image with the english tab designation, hit wipe data, and reboot again, voila there you are back in bussiness.
All the gredits go to the developers of the above used tools, since I just was lucky enough to find the way through.
Good luck to all Mi9T/K20 xiaomi owners with your phone revival process.
Best regards to all of you.
P.S.
Forgive my English for any syntax or grammar errors.
I wish I had more time to spend for a more comprehensive guide.
Works for k20 pro aswell?
hrdlw said:
Works for k20 pro aswell?
Click to expand...
Click to collapse
Hi there I have not tried since I have only Mi 9T.
But yes, I am sure pretty much is the same think, instead of downloading the K20 rom, simply download the K20 pro one,
I wish you a good revival.
wow, this is too good to be true ? hope it will works for ppl who have brick. thanks
Awesome news, THX
Thank you for providing us an alternative way of reviving hard bricked devices. I hope this also fix similar problems but with a locked bootloader.
btw can i just unlock bootloader easily from this tool?
@Fantomduck Wait wait, i missread in your post "(only for unlocked bootloader)" So this is tutorial for those who have already unlocked bootloader to unbrick device or what? im confused now... bcs if we have unlocked bootloader there is no point to do this steps u described then, we can simply flash any stock rom on unlocked bl and unbrick drvice.
Yeah from what I understand, it basically flash the rom via EDL mode, but for unlocked bootloader. But why bother with EDL when the bootloader already unlocked? Also, I thought we can only flash ROM via EDL with authenticated tokens?
If this app can flash rom via EDL without special authentication, it should works for both unlocked and locked bootloader, though it might be different for Mi 9T Pro.
Very interesting nevertheless.
Hello again,
Just a clarification regarding, "I tried one more ultimate time, and boom success".
I ment tried one more time, by using alternative ways such the one that I post .
Not the Mi flash tool.
Well I guess thanks for taking the time to write this guide, however it's not applicable to hard bricked phones, and all the AIO tool does is use fastboot commands, that's the reason it requires fastboot access with unlocked bootloader.
Hard brick means :
- No fastboot at all. No way to boot to it on the phone. Plain black screen and nothing else.
- Stuck in fastboot with bootloader LOCKED and wrong ROM installed ("system has been destroyed"/"this MIUI can't be installed on your device")
Unfortunately for hard brick cases your only option will still require an authorized EDL account (and short the test pins for the 1st case) and only by using Mi Flash Tool.
Hi, yes I flased my phone via EDL Mode since I had no other option, (hard brick) the system was erased by a terrible mistake and the phone was only opening to fastboot mode, no matter what. And if you have hard bricked device you can not flash it in fast boot mode simply because your computer can not see the phone.
Click to expand...
Click to collapse
If your phone can boot to fastboot and the bootloader is unlocked then it's not hard bricked and can be recovered simply with fastboot commands. If you couldn't see the phone on the computer it was probably because of missing drivers or possibly fastboot/adb not running with admin rights, which I guess the AIO tool seems to fix with the "set ADB and fastboot privileges in system wide" option...
Yeah I thought so, as that app is basically a GUI version of fastboot and adb command. But I appreciate the effort to help people in here to recover their phones.
ShiningScias said:
Well I guess thanks for taking the time to write this guide, however it's not applicable to hard bricked phones, and all the AIO tool does is use fastboot commands, that's the reason it requires fastboot access with unlocked bootloader.
Hard brick means :
- No fastboot at all. No way to boot to it on the phone. Plain black screen and nothing else.
- Stuck in fastboot with bootloader LOCKED and wrong ROM installed ("system has been destroyed"/"this MIUI can't be installed on your device")
Unfortunately for hard brick cases your only option will still require an authorized EDL account (and short the test pins for the 1st case) and only by using Mi Flash Tool.
If your phone can boot to fastboot and the bootloader is unlocked then it's not hard bricked and can be recovered simply with fastboot commands. If you couldn't see the phone on the computer it was probably because of missing drivers or possibly fastboot/adb not running with admin rights, which I guess the AIO tool seems to fix with the "set ADB and fastboot privileges in system wide" option...
Click to expand...
Click to collapse
Dear ShiningScias.
Hello, well I guess then, I was on the shoft bricked side?
Thank you for making that clear to me, I then have to apologize, to everybody that I have mislead, with an assumption that was not the correct one.
I misunderstood what the hard brick is, I think probably i had jumped to that conclusion because when I was searching for rooting my phone I came across with so many tutorials and advices not to make any mistake while shifting between roms with ARB or else the outcome will be a hard brick.
Best regards.
Fantomduck said:
Dear yumm91,
Hi, yes I flased my phone via EDL Mode since I had no other option, (hard brick) the system was erased by a terrible mistake and the phone was only opening to fastboot mode, no matter what. And if you have hard bricked device you can not flash it in fast boot mode simply because your computer can not see the phone.
Thus not adb debuging authorization to comunication with the device for reflashing. So only EDL Mode that qualcom put in place for such an awkward situation
At that time the only tools and knoledge I had regarding my newly purchased phone Mi9T was:
A) Flashing through Mi flash tool (which is locked for everyone to use without special account) I found it out afterward.
B) the all in one tool, that I found when I was looking for help in xda forums, which is for unlocked phones, as it states in the main window.
Said that before, I started looking for how to flash it in edl mode.
Nobody new then (a week ago) how to revive, bring back to "life" their phones( Mi9/K20 and Pro variants).
The general idea that was floating around regarding hard bricked devices.
Was the option of having a person with authorized account for flashing, to enter to your computer, and flash it for you,
( after opening the back cover and disconnect the battery, while make jumper between the the special points on the PCB).
To return the phone back to have it repaired, Xiaomi's suggestion.
I tried many times the mi flash tool, even when I was logging in, my xiaomi account said "this computer is bound to your account you can start now", but with no luck.
So Before I take my phone and bring it to a service center, for flashing for 55 euro.
I tried one more ultimate time, and boom success.
From what I know locked phones, can not be hard bricked since the system will not let you roll back, or flash not original xiaomi rom.
I posted the way arround to the Mi flash tool, that I came accross by trying to flash a bricked device , for everybody to overcome the authorization problem.
I am not a developer nor an expert regarding android programming, I just have little experience from previous devices that I messed arround by trial and error.
Click to expand...
Click to collapse
You haved probably problem with fastboot drivers for your phone. Bcs this tool u used to boot EDL mode is also using fastboot first to boot in EDL so how u boot EDL if u told before that your phone can't be recognised by fastboot on your pc ?
I guarantee u can easily unbrick device with unlocked bootloader using only miflash or using fastboot command on adb. So there is no point to do all steps in description.
Wait. If i will unlock bootloader, and for some reason it will fail and brick, it will be bricked on locked bootloader or unlocked?
Is this method works with a GLOBAL image flash to a chinesse K20?
Fantomduck said:
Hello to everybody.
Dear friends I post this to guide (only unlocked bootloader rooted phones) you through the steps that I used to succesfully recover my Xiaomi M9T
from a hard brick (by that time only edl mode was available).
Since Xiaomi has decided to lock down their Mi flash tool, and only special authorized accounts have an access to their utility tool.
was almost impossible (by yourself) to recover your phone from a hard brick situation.
I found a way arround to xiaomi tool with a 100% succesfull 1st atempt with my own phone it worked flawlessly.
Forget the point to point jumbers with a required open phone procedure.
Forget the authorized account holders with a teamviewer use of your computer and a fee for their services (logical).
Forget returning back your phone to any authorized repair center for a revival for what ever cost.
Below you will find al the steps one by one.
First thing you need is to install: minimal_adb_fastboot_v1.4.3_setup. https://forum.xda-developers.com/showthread.php?t=2317790.
Run it and put "Y" and hit enter all the way through.
Second you need to install: TOOL_ALL_IN_ONE_2.0.1.1. https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Press tab advance options.
under the advance options window press first the tab Set ADB and fastboot privileges system wide.
It will asc you for confirmation press the tab again with the same Set ADB and fastboot privileges system wide.
Then press the tab Open a free terminal with ADB and fastboot privileges.
and type in the terminal the cmd fastboot oem edl,
It will say ADB boot oem edl OK. (unforunatelly I have no screen print from this one).
You will know at once because your phone goes from fastboot (bunny) screen to black screen and enters edl mode, is normal do not be alarmed.
In your computer you will see now under setting> devices> Qualcomm HS-USB QDLoader 9008. That is a good thing you are now in edl mode.
From there go back to already running all in one tool.
Press the tab Flash Factory images, you will go to the respective screen (below).
Select Flash all, and press the download factory image china.
Immediately will redirect you by a pop up window to the chinese site of the MIUI.
Scroll down and you will come across the Redmi K20 rom, downloaded and save it to your desktop.
Once is done decompress twice from tgz. file, to tar. file, to ready to flash rom file.
Now come back to all in one tool, and select the rom from the browsing tab, go to the desktop folder where you have previously download the roam and select the ready to flash (unzipep file) once is loaded hit flash Rom and seat back.
The ADB terminal will start the flashing procedure you will know from the very beggining if everything is normal,
Because the terminal shows the file is being prossesed and the time for each action with a followed OK
During the procedure it will break up between two or three stages of the flashing, momentarily again do not be alarmed.
If everything goes well the operation will finish with a gorgeous redmi bootup logo.
(once again I apologize no screen shot taken in advance for this step)
It will finally bootup to system, allthough it might not, But one more time do not be worried, officially you have succeded reviving your hard bricked phone.
From there if is not completing bootup simply press volume up+power botton and you have the official recovery, (in chinese of course) but you can easily
find an image with the english tab designation, hit wipe data, and reboot again, voila there you are back in bussiness.
All the gredits go to the developers of the above used tools, since I just was lucky enough to find the way through.
Good luck to all Mi9T/K20 xiaomi owners with your phone revival process.
Best regards to all of you.
P.S.
Forgive my English for any syntax or grammar errors.
I wish I had more time to spend for a more comprehensive guide.
Click to expand...
Click to collapse
Dear Fantomduck,
Thanks for sharing this with us.
I just wonder if this method will works with a GLOBAL image flash to a chinesse K20?
i used this tool before and flash k20 pro cn firmware via fastboot only no need miflash anymore. i didnt even go to edl to flash because i have bootloader unlock.
maybe someone can try to do this tutorial if they have bootloader locked and bricked
Hello sir , i would like to ask that if u use AIO tool method, so will fastboot be locked after unbrick process ?
luizkun said:
Hello sir , i would like to ask that if u use AIO tool method, so will fastboot be locked after unbrick process ?
Click to expand...
Click to collapse
i think you phone still unlock because it will use flash only not flash and lock.
arielugose said:
i think you phone still unlock because it will use flash only not flash and lock.
Click to expand...
Click to collapse
But can AIO tool reallly flash in EDL mode without Auth Mi account ? , or AIO tool will reboot to fastboot again and flash it ?
hi there
i was trying to flash my rom but accidentally it was locked by default and it shows miui version can't be installed on this phone
now i am trying to use edl mode to short the test points
should the phone be off or in fastboot mode while doing this
will start working when i short test points by tweezer and be identified by the computer or what
please explain how as teachers do ?
Ibrahim115 said:
hi there
i was trying to flash my rom but accidentally it was locked by default and it shows miui version can't be installed on this phone
now i am trying to use edl mode to short the test points
should the phone be off or in fastboot mode while doing this
will start working when i short test points by tweezer and be identified by the computer or what
please explain how as teachers do
Click to expand...
Click to collapse
can you just fastboot to edl? also dont you need an authorized account to flash in edl? im trying to get my mi 10 pro back to cn rom and edl says account not authorized
i couldn't do fastboot to edl
the only way i found is through test points
still can't do it properly so i am asking about the proper way
i will keep you updated when it's done
I'm also interested in a solution, 'cause I bricked my Mi 10 in a similar way
Success is disgusted by some people, and will not share any files for free in the future.
Your Post Very Helpful For Us ,
I Am Test This File Then Post Result , Thanks For This File Provide !!!
johnny886 said:
In China, this Phone is called Nubia Play, and the Global version is called Redmagic 5G Lite,
but the mobile phone model is NX651J. Generally speaking, the two are only the difference in ROM.
This is the edl firmware of Nubia Play,CN version.which can repair your phone in edl mode.
All the files are from the official package without any modification!
How to do?
1.Open XiaoMiFlash.exe in the MiFlash folder
2.Click the select button to select the images in this firmware
3.The phone enters edl mode and connects to the computer with a usb cable
（If your phone is in edl mode (9008 mode) for a long time, you must long press the
power button volume + and volume-keys to force the phone to power off, and then re-enter edl mode）
4.Click Loading and see the COMxx that appears, indicating that your phone is connected. Then click Flash
5.Then just wait, prompting flash done！sucess! It means that the flashing has been completed,
long press the power button to restart the phone!
When you see the green notification light next to the front camera light up,
you can release the power button.
Good luck！Enjoy it！！！
Download link：
https://mega.nz/file/eNkVSA6T#2yN_JHtOxB_K4NHVTF3qT_asMMFtnEKBQ6sQ8b-y2nU
Click to expand...
Click to collapse
Only spanish?
GSM KING MAKER said:
Your Post Very Helpful For Us ,
I Am Test This File Then Post Result , Thanks For This File Provide !!!
Click to expand...
Click to collapse
Is global rom? Only spanish?
thequellu said:
Is global rom? Only spanish?
Click to expand...
Click to collapse
Its Not Global Rom , Only Chinese Firmware !
Why do I use scarlet letter when I use flash
The brick tool has worked on a few occasions ,thank you for that but now I need more help or suggestions, when playing between the Spain ROM and China version I lost the baseband and IMEI.Then I thought,locking the bootloader back would help obviously it did not work. Now even though I flashed the unbrick tool though miflasher edl mode I am stuck with a blank screen after the Nubia logo and port Qualcomm 900e in Windows device manager.
Tried already via recovery to flash an update China version or Spain version they flashed fine however still same scenario after Nubia logo.
Not sure what my options are.
Does this work for updating or just brick?
DargorDG said:
Does this work for updating or just brick?
Click to expand...
Click to collapse
It does work to fix the update errors and then use the OTA or USB Otg method
@johnny886
Thank you for the tool.Just wondering if there is a version for Android 11 as i updated to 3.16 android 11 firmware via the usb and now I get your device is corrupt.
Obviously my problem dates back to unlocking and then relocking the bootloader which somehow bricked the phone. Even though before relocking the tool worked once the bootloader was locked the phone wasn't able to boot into system but I was not getting the device is corrupt.
I am hoping for a way to unlock the bootloader or to be able to get back into the system to tick the option in the developer settings hence I am keeping my hope for an updated unbrick tool.
I donwload the file and uncompress it, when select the folder with XiaoMiFlash is shows "could't find flash script".
There are no flash_all.bat file on folder
any help, where is that file?
(mega interrupt the download process)
@ecatombe1234
In my case said the same with regards the script but had flashed fine once started.
Just be careful if you have the bootloader unlocked do not lock it again with the fastboot flash lock.
Thanks for you, really soon, response.
Yes, I try, put phone in edl mode, refresh, flash, and recive [... COM8]:ERROR_UNSUPPORTED_TYPE 0
@ecatombe1234
Usually this is down to the drivers used for Qualcomm Edl mode. Have you installed them ?
Is the EDL mode phone recognized in the device manager as Qualcomm??
Yes, I have correct drivers, I restored the phone last year, but not now.
Xiaomi tool detects phone in bootloader and in edl mode.
Windows detect phone in edl mode as: Qualcomm HS-USB QDLoader 9008 (COM8).
I tried with QFiL too, but I am not sure the config to work qith this, because it detect mobile in edl mode.
Any way, Xiaomi tool has very few config options, I can's understand the "could't find flash script", can any one give us ligth about this error?
It was xiaomi flash tool version, I tried a lot, finally this one works, it is the only one that works with corrupted android 11 version.
Download Xiaomi Flash Tool- v20210226
Mi Flash tool is meant for all Qualcomm powered Xiaomi and Redmi phones on which you can flash MIUI Fastboot ROMs. It works over the Fastboot connection to erase and…
droidfilehost.com
That will work to my dead boot nubia paly 5g?
@ecatombe1234
Thank you for the version even though this version got me a bit further in a Chinese testing menu still couldn't boot into system .
Must be something to do with the relocking of the bootloader.
Helo guys.. How can I downgrade from android 11 back to android 10 on this device? I recently updated my software but It is not stable yet. Certain apps for example PUBG mobile keep crashing whenever I try to launch it.
Mitchpop said:
@ecatombe1234
Thank you for the version even though this version got me a bit further in a Chinese testing menu still couldn't boot into system .
Must be something to do with the relocking of the bootloader.
Click to expand...
Click to collapse
I've been following your discussion on this thread and had the same problem after ota update to 3.16.
I also had initially difficulty flashing with MiFlash but finally it worked.
I immediately pressed the flash after entering EDL mode
My phone flashed and entered the Chinese mode. I then went to bootloader by hard pressing the power button and Vol down key.
In bootloader I entered recovery which allowed me to update using OTG. I used a flash with USB C and loaded the phone with NX651J v 22 and my phone is back to the previous settings.