Hello guys, today i am going to share with you some flashable bootanimation's.
How to install :-
1- First of all you must have custom recovery installed on your vivo y51l. You can find it here
https://forum.xda-developers.com/showthread.php?t=3692376
2- Then backup you system. Just in case if any thing went wrong.
3- Then download any flashable bootanimation.zip you want and place it in your sdcard.
4- Now boot into custom recovery and select install and chose your bootanimation.zip
Done now you changed your bootanimation/
I am sharing some flashable zips download it from the below link. Hit thanks if you like it ?
https://mega.nz/#F!AW4yAR5S!oSQQdazZJsmPzQXLj_3hbw
Boot animations are not successfully flashing ...bro ?
Related
Recently xolo came up with kitkat upgrade for xolo Q1010i
I had rooted my xolo q1010i ( din't install any custom ROM )
On knowing about the updated I unrooted my phone but now I am not able to install updates
I am able to see n download the updates
I thing I get some fingerprint doesn't match error
Pls help xda members !
Thank you
just flash stock recovery!
Hi there.. Xolo q1010i KitKat update cannot be flashed through custom recovery.. just flash the stock recovery and download the update zip from Xolo official site and place it in the root of internal memory.. plz note that the file should be in internal memory, not in memory card..
Hi there, please try this at your own risk.
i have successfully flashed this rom and confirm its working with root access.
1. use this link to download the usb drivers. if it its a zip/rar package, extract it.
http://androidxda.com/download-xolo-usb-drivers
2. install them.
3. use this link to download SP Flash tools. same for zip/rar, extract.
https://drive.google.com/uc?id=0BwSiHc_5wjHJcFRJOEJ6dndsbjg
4. download the rom from here and extract it.
http://d-h.st/5qB
6. charge the phone to around 70% at least and switch it off and dont connect it to PC yet..
7. open SP flash tools. select this file
MT6582_Android_scatter
from the extracted rom folder under scatter-loading
8. VERY Important : select 'download' mode for flashing.
9. click on the green download arrow.
10. now connect the phone.
11. you will see a red line filling the bottom of the flash tool window followed by purple and yellow.
12. a dialog saying download complete with a green tick mark will pop up.
13. disconnect the phone.
14. switch it on, do a factory reset via settings if you want.
Hope this works, all the best.
I must mention i am not the original uploader and a big thanks should go to the them for providing us with the required files.
the original thread is here
http://www.androidjugaad.com/index.php?threads/xolo-q1010i-stock-sptools-rom.1123/#post-16089
when i was updating thru zip with stock recovery i didnt get it to work....
i did OTA only then it installed...
alternatively u can flash the rooted kk rom...
or u update it via OTA after u flash stock recovery...
to get root access flash custom recovery n install supersu zip.
Does anyone have or can get the stock rom of Alcatel OT Flash 6042D? Thanks.
stil looking for the same stock rom. Does anyone have it? Thanks.
reboxyde said:
stil looking for the same stock rom. Does anyone have it? Thanks.
Click to expand...
Click to collapse
let's discuss this here:
http://forum.xda-developers.com/android/help/root-request-alcatel-one-touch-flash-4-t2949466
Hi,
I tried uploading back up of rom taken from SP flash tool but file size is huge around 1.6GB. Alternatively CWM back up is small size of 333MB so you can use cwm back up to flash your phone. the link to download rom is as follows: -
https://drive.google.com/uc?export=download&id=0B6hkMCWEBsEPQy03SnBWNlNLUXM
Just extract the folder and store in your sd card. Do not overwrite or rename any file. than flash cwm recovery using sp flash tool. use this guide to flash cwm if you don't how how to do the same:-
for rooted phone: -
http://www.theandroidhow.com/2014/0...cwm-recovery-any-mediatek-android-device.html
for unrooted phone: -
http://www.theandroidhow.com/2014/05/how-to-make-flash-cwm-recovery-without.html
if you need scatter file or stock recovery file for onetouch flash than you can download it from here: -
https://drive.google.com/uc?export=download&id=0B6hkMCWEBsEPU090UGtYT05hWnM&authuser=0
Hello. Did you check if the bakup is working? Did you do a recovery from it at least once? I tried to install your backup on a TCL S720 phone which is the same phone (95% sure....) and it didn't work. It said on CWM recovery "Flash failed". I want to mention that the rom files you uploaded should be in the root of the zip file not in a directory. I've archived the file directly in the root and it didn't work. Any idea? Could you upload the whole rom, the 1.6 GB one and paste the link here please? I know many people is looking for it. Thank you.
tcl s720
I restored this nandroid from alcatel ot flash 6042d on to my TCL S720
The restore process went well,no errors,but the rom is not booting it is in a boot loop.
I tried substituting boot.img from tcl s720 but no luck,I even tried patched boot.img,no luck either.
So,I hope someone with mad porting skillz will be able to port this alcatel 6042d rom to tcl s720.
@jhalife
If you can upload the whole backup 1.6gb made with sp flash tool I will be very grateful and many other TCL S720 will be grateful also
Thanks
Hi, i can do that but i will take sometime. atlst 2 wknds. Will try doing that this saturday my net speed is slow so giv me smtime
Need CWM recovery file
jhalife said:
Hi,
I tried uploading back up of rom taken from SP flash tool but file size is huge around 1.6GB. Alternatively CWM back up is small size of 333MB so you can use cwm back up to flash your phone. the link to download rom is as follows: -
*url*
Just extract the folder and store in your sd card. Do not overwrite or rename any file. than flash cwm recovery using sp flash tool. use this guide to flash cwm if you don't how how to do the same:-
for rooted phone: -
*url*
for unrooted phone: -
*url*
if you need scatter file or stock recovery file for onetouch flash than you can download it from here: -
*url*
Click to expand...
Click to collapse
Hey Jhalife,
Could you send the CWM Recovery because my phone is bricked and I can't possibly make a custom recovery at this stage. I have a TWRP so I can install CWM Recoveries.
HOW TO FLASH CUSTOM RECOVERY IN XOLO A600
Hey Guys!
*Rooted Your A600?
*Want To Flash Custom Recovery?
Than You Are At Right Place!!
Here I will Tell You How To Flash Custom Recovery In Your A600!
Let's get started!
PROCESS:-
1. First Of All Download Any Custom Recovery That You Want To Flash! But It Should Be According To Your Firmware Or Build Number!
CLICK HERE TO DOWNLOAD RECOVERIES FOR XOLO A600
2. Than Extract Zip Of Recovery (If In Zip File!) If Not Than Skip This Step!
3. Now Place recovery.img In SD Card But Not In Any Folder.
4. Now Download "Rashr" From Play Store!
5. Open Rashr.
6. Give Root Permission.
7. Than Click On "Update Recovery From Storage"
8. Now Navigate To recovery.img & Click On It! Yes or No Pop-up will come! Tap On Yes!
9. Again A Yes or No Pop-up Come! Tap On Yes! Now It Will Reboot You Into New Recovery! Which You Flashed!
Hurrraaaahhh! You Have Successfully Flash A Recovery!
Now You Can Make Backup Of Your ROM! And Can Flash Anything That You Want!
If You Found This Useful Than Please Hit Thanks! It Will Not Cost You Anything But It Will Motivate Me A Lot!
"Thanks"
Are you boring with stock boot logo ? its time to change this.....
just simple step
1. download the flashable zip file
2. flash via custom recovery
3. just reboot
( i tested in my own canvas a1.. its worked 100% well. without any issue are boot loop )
lets try it.
Hi ,everyone ,
I'm sharing this recovery , ported by Syed Ahmed Ali Shah (All credits to him)
How to install:
Download Spflashtool and recovery zip file
Extract the zip file , you will find the recovery.img + scatter file
Open Spflashtool , and load that scatter file.
The recovery should appears now (in spflashtool , it is supposed to be chacked/selected)
Choose download only and press on download button
Turn of your device ,and plug it in
wait till the succes mark appears
unplug you're device and boot directly to recovery
the recovery will ask you t allow system modification , don't allow for now ...because this will brick (not really,it will stops at logo, can be fixed by rooting it) you're device..
Rooting the device :
Now that you have the recovery ,Download supersu.zip file and flash it with that recovery...
Backup your firmware before rooting/ allowing modification
I'm not responsible for any damage that could happen , do it at your own risk
Hello I have succeeded to boot to TWRP recovery tool but i don't see the buttons
I see only ReadOnly, Language
and also Give permission modification
and I am afraid to brick my new Allure A55 Slim
For updated rom
This method is suitable for marshmallow OTA updated? Because it is impossible to make a backup of rom/data in the MTK Droid tool, as well as generate a scatter file.
Done. TWRP has been flashed, then rooted. The current scatter file can be generated from a ROM backup created by SPFlashTool, using the WwR_MTK software. And also cuting the ROM to img files for flashing, look at 4pda.ru, really powerful combine.
Works for Blu Vivo 5 mini??
d3n1ls0n said:
Works for Blu Vivo 5 mini??
Click to expand...
Click to collapse
If you can make a backup and know how to use the recovery tools, then you can try. But I recommend trying a safer way first. With the Kingoroot application or AutoRoot Tools on this link https://qitapso.com/how-to-install-twrp-custom-recovery-on-blu-vivo-5-mini/ (works on Lollipop)