Here are OEMs that I collected online and would like to share with you guys for playing with changing regions on the device for testing (please bear your mind in bricking your H5C if you make it by yourself - plse make sure you know what to do with it).
1. NEM-UL10C00 (Chinese one) via TWPR zip installation
2. NEM-L51C900 (no fingerprints) via TWPR zip installation
3. NMO-L31C636 via TWPR restoration
Anyone has others, plse share!
Bonus: I am testing Meticulus RR build 5-Nov-2017
I came from eMui 4.1.2 (NMO-L31C636B152)
Unlock bootloader/ Meticulus TWPR/ Restore OEM VNS-L21 (P9 lite oem)aatached later-
-Reunlock/ Meticulus TWPR/ Wipe (Devik/ Data/ Internal)/Fash RR/Flash Gapps-
-Reboot TWPR/Wipe (format Data)/Reboot
Pray
It recognizes the sim card, signal is on even LTE (4G)/ Data, Calls, Camera
Thanks for sharing. I will update the repository thread with these useful files. There was already a thread for OEM info file collection
For nem-l21 ?
Repository updated with info and credit.
Many thanks man you saved my phone big thanks :good::good::good::good::good:
that is OEM NMO-L31 on Emui 5 right? And it isn't , can you provide me one ?
Pool20 said:
that is OEM NMO-L31 on Emui 5 right? And it isn't , can you provide me one ?
Click to expand...
Click to collapse
What is cxyz? Is it c636 you are looking for? If so, its in OP
Oh right sorry
OEM for NEM-L22C675
stevedat said:
Here are OEMs that I collected online and would like to share with you guys for playing with changing regions on the device for testing (please bear your mind in bricking your H5C if you make it by yourself - plse make sure you know what to do with it).
1. NEM-UL10C00 (Chinese one) via TWPR zip installation
2. NEM-L51C900 (no fingerprints) via TWPR zip installation
3. NMO-L31C636 via TWPR restoration
Anyone has others, plse share!
Bonus: I am testing Meticulus RR build 5-Nov-2017
I came from eMui 4.1.2 (NMO-L31C636B152)
Unlock bootloader/ Meticulus TWPR/ Restore OEM VNS-L21 (P9 lite oem)aatached later-
-Reunlock/ Meticulus TWPR/ Wipe (Devik/ Data/ Internal)/Fash RR/Flash Gapps-
-Reboot TWPR/Wipe (format Data)/Reboot
Pray
It recognizes the sim card, signal is on even LTE (4G)/ Data, Calls, Camera
Click to expand...
Click to collapse
Dear Sir
You have these file for Indian version honor 5c NEM-L22C675B140
Related
Resurrection Remix ROM - 6.0.1 MM [OTA] Stable
(Spl thanks to Ajit_The developer)
For InnJoo i2 [DUAL SIM FUNCTIONAL]
I am not the original developer so I do not take any credit in making this ROM
This ROM has been powered by http://mtkroms.com
the original ROM can be found at - http://www.mtkroms.com/2016/05/stable-ota-resurrection-remix-mm-mt6592.html
Hi All,
I am Pleased to announce that MM 6.0.1 based RR Rom (popularly know as RR) is now available for our InnJoo i2.
The Developer recently released an updated version based on CM-13 for MT6592. I have ported it for our i2.
The ROM has been tested extensively and almost everything is working fine including GPS, Camera, USSD, Apps, Heavy Games etc.
I am sharing the ported ROM for you.
Here is the link:-
https://drive.google.com/open?id=0B3qo1NHCkeAlcWNQUlNuQzBRUk0
Instructions :-
1. Please use only Philz or TWRP recovery, havnt checked on CWM
2. Please have a full nandroid backup of your current rom before you flash
3. Copy ROM & GAAPs on SD Card
4. Please ensure you are doing a clean install of the rom. Check advance wipe/Erase all, except SD card
5. After install the ROM,flash GAAPS and then let the ROM boot up.
6. Let the ROM boot up, it will take 6-8 minutes. Once it boots up you will see optimizing apps screen notification.
7. After boot up, set the device and SD card (in MM Roms, you need to check approve access for SD card)
8. You can install Xposed zip and other Mods you feel fit. (Plz ensure system space as the ROM is feature heavy)
9. Happy flashing
Below is the link for the original ROM and GAAPS
http://www.mtkroms.com/2016/05/stable-ota-resurrection-remix-mm-mt6592.html
Please feel free to visit and thank the developer
I am using my own version of BENZO Gaaps, here is the link
https://drive.google.com/open?id=0B3qo1NHCkeAlbElpc3hhT0xkRFE
No Bugs
USSD code is working
SMS working
3G working
Camera (Front& Back) working
YouTube working
Ok Google Mic is working
Off Mode charging is working (no animation)
Battery removal, changing sims, low battery off will not result in Boot loop so no more wipe cache required
Let me know if someone is unable to flash or has any other issues/bugs
Here are few Screenshots
Guys can anyone test and update here.
I found an issue while receiving calls, the network drops and call gets disconnected
Outgoing calls work Like a charm as I only tested this ROM for outgoing calls. Had been on outgoing calls for hours on this ROM but didn't realized the incoming call issue.
Thnx
EDIT
Plz give full permissions to Telephone app. this will fix the incoming call error
Enjoy
reserved 2
Attached Philz recovery for users
I am using the same
Hi Mohammed
great work with this rom,
just need some clarification, will this ROM work for innjoo fire (standard)?
16GB onboard and dual sim
seems this phone is labelled differently in different countries, even through specs identical
here in RSA its labelled innoo fire, but outside it seems identical to i2S
is it safe to flash this Rom? have you tried this before?
eg789123 said:
Hi Mohammed
great work with this rom,
just need some clarification, will this ROM work for innjoo fire (standard)?
16GB onboard and dual sim
seems this phone is labelled differently in different countries, even through specs identical
here in RSA its labelled innoo fire, but outside it seems identical to i2S
is it safe to flash this Rom? have you tried this before?
Click to expand...
Click to collapse
I cannot say it surely coz innjoo is selling fire devices in middle east as well
If u wanna try it, use the recoveries available for i2 (twrp & philz)
If the device boots up then you are good to go
Remember that all ur data will be lost when u wipe ur device to flash any new rom and wrong roms or recoveries may result in dead devices
Only way out will to to flash the stock rom using SP Flash tool (if it's a soft brick)
You are doing all this at your own risk
Best of luck
Sent from my SM-N920C using Tapatalk
mohammad.nomaan said:
I cannot say it surely coz innjoo is selling fire devices in middle east as well
If u wanna try it, use the recoveries available for i2 (twrp & philz)
If the device boots up then you are good to go
Remember that all ur data will be lost when u wipe ur device to flash any new rom and wrong roms or recoveries may result in dead devices
Only way out will to to flash the stock rom using SP Flash tool (if it's a soft brick)
You are doing all this at your own risk
Best of luck
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
thanks for the Advice mohammed,
Im still trying to confirm its the same device, by getting you CPUZ info before I try anything,
I would rather be cautious and get you the correct info to advise me if its safe to proceed or not.
Hi Mohammed,
I have attached below the screenshots of my phone specs,
please advise if this will work for me, before I give it a try and brick my phone inadvertently
.
Will it work for i2s
Mafaz A Samadh said:
Will it work for i2s
Click to expand...
Click to collapse
Hasn't been tested in i2s, technically it should work but please make a backup of ur existing ROM before u flash as some users has trouble with other i2 custom ROMs on i2s
Best of luck
Sent from my Moto G using Tapatalk
eg789123 said:
Hi Mohammed,
I have attached below the screenshots of my phone specs,
please advise if this will work for me, before I give it a try and brick my phone inadvertently
.
Click to expand...
Click to collapse
The Chipset is different in your device (MT6582 - Quadcore) than the one in i2 (MT6592 - Octacore)
I2 has only 1GB RAm, ur device has 2GB
i2 has HD screen (720p) urs is lower resolution
so there is a big chance this will not work
I don't have that device so can port it either
Should I report my stock and the rr ROM newly since I have a i2s
Mafaz A Samadh said:
Should I report my stock and the rr ROM newly since I have a i2s
Click to expand...
Click to collapse
If u mean u can flash it on i2s, u can if u have a twrp or Philz recovery working for ur device
I would recommended to backup ur current ROM using the backup feature of these recoveries and then flash
Remembered you are doing it on your own risk
Sent from my Moto G using Tapatalk
Nice Port Just Checked Out WOrking FLawlessly...
... sorry but I'm very confused ...
I'm reading the possible on the network, but the result is I always get confused more despite having a certain familiarity in modding having modded a galaxy nexus, and an LG G2 on which I installed TWRP recovery and various CyanogenMod ROMs.
Unlocking the bootloader in kate/SE, in an official or unofficial way, is still very difficult or almost impossible?
I often read of modified TWRP recovery, which sometimes give problems and sometimes it does not ...is it possible just put the official TWRP for kenzo?
If I can somehow install a TWRP, is possible to easily install the CyanogenMod ROM (after flashing ROM flashing kate modem is needed) and provide CM updates simply by flash new ROM via TWRP recovery?
Thks in adv
Nope! It's easy as 123... Please, check:
http://en.miui.com/thread-345728-1-1.html - for unlocked "emmc_appsboot.mbn".
You can also download ALKA TWRP, rename to "recovery.img", and replace it in fastboot ROM (image folder).
(As well as "emmc_appsboot.mbn emmc_appsboot.mbn", downloaded from the link above.)
ALKA TWRP: http://en.miui.com/thread-282773-1-1.html
rafaelbrunner said:
Nope! It's easy as 123... Please, check:
http://en.miui.com/thread-345728-1-1.html - ...
...
Click to expand...
Click to collapse
Thks for yr reply
I read official unlocking was successful for very very few owners and
such unofficial unlocking gave problems to many others, like bootloop etc...
is that wrong...?
Mrx65 said:
Thks for yr reply
I read official unlocking was successful for very very few owners and
such unofficial unlocking gave problems to many others, like bootloop etc...
is that wrong...?
Click to expand...
Click to collapse
I could not unlock my "kate" officially.
I've tried the method posted above, and works like a charm!
No bootloop, at all...
Thaknk yo so much for yr reply
I remain with the feeling of more complexity and less certainty, than the modding of the galaxy nexus and also the LG G2...
Official unlock works fine.
I have a Kate and unlocked it officially.
Just make sure to flash the global developer ROM, log into your MI account on the phone and press the "bind device to account" button inside the security settings menu before attempting to unlock.
I also got my Kate to unlock officially after using updater on phone to flash global beta rom.then in developer options clicked MI unlock status then linked phone to account. After that unlocked first try after many many failed attempts on global stable.
Nice news and info, thks so much!
But... why so many people can't officially unlock their kate having 50pc error...??
Which version of miui unlock tool and Global Dev. ROM you used when officially unlock yr kate?
I used global beta 6.11.24 and MIflash unlock_1.1.1111.1_en
Thks for reply and info
My device(Kate) haven't really arrived yet but because of the abyssmally slow internet in my country, I'm already downloading the necessary stuffs.
Checking the newbie guide by SharkcpN:
7. Flashing AOSP 7.x Nougat ROMs
- Boot To TWRP
- Backup Current ROM
- Flash Android N Firmware Zip
- Reboot to Recovery
- Factory Reset
- Flash ROM Zip
- Flash G-Apps 7.0/7.1 Zip
- Reboot To System
Click to expand...
Click to collapse
The thing is I don't know what that Android N Firmware is and I can't seem to find it. I already have all the stuffs I need except that. Can anyone provide a link?
Find latest MIUI firmware (for kate, at dev section) and you are good to go.
THIS: https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
SUPPORTED DEVICES
Honor 4X
CHE2-UL00
<MOD EDIT - Unsupported Models removed.>
CHE2-L12
CHE2-L23
CHE2-TL00
CHE2-TL00M
P8 Lite
ALE-L01
ALE-L02
ALE-L21
ALE-L23
ALE-TL00
ALE-UL00
Honor 4c
CHM-CL00
CHM-TL00H
CHM-UL00
CHM-U01
G play mini
CHM-U01
CHC-U03
CHC-U23
G Play
G735-L03
G735-L23
Y6II
CAM-L03
CAM-L21
CAM-L23
Honor 5A
CAM-AL00
CAM-TL00H
CAM-TL00
CAM-UL00
CAM-L21
BUGS
Bluetooth
And minor bugs
HOW TO INSTALL LINEAGEOS
- Install any firmware MM for p8 lite or honor 4c
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP. (see Downloads)
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- IMPORTANT: Do a Factory Reset. (Wipe data & cache)
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot
Click to expand...
Click to collapse
HOW TO INSTALL TWRP
- Allow oem unlock
- Power off
- Hold Volume down + Power for Fastboot mode
- fastboot boot twrp.img
- adb push twrp.img /sdcard/
- Choose "Install" and then "Install Image"
- Select twrp.img
- Select Partition "Recovery"
- Confirm Flash
- Reboot to recovery
Click to expand...
Click to collapse
DOWNLOADS
LineageOS14.1
removed
THANKS TO
@DanteFX™
@ROM-PacMe
Team-Panther
OpenKirin-Team
TEST
@flxtremo
@Jarabe GPM
@Loopeez
@p4ulc4stillo
And GPM LATAM Group
SUPPORT ME
I hope kindly your appreciation (button below :good: ) thank you vey much
So, to install it on my y6ii/gw, I have to install a p8 Lite firmware first? I didn't knew this was possible
ferpunk said:
So, to install it on my y6ii/gw, I have to install a p8 Lite firmware first? I didn't knew this was possible
Click to expand...
Click to collapse
Yes, install P8 Lite firmware
Honor 4C CHM-U01
Installation on Honor 4C fails in TWRP 3.1.0.0 aborted 7
It can be done just like installing any other firmware for my y6ii? Sorry but this is my first Huawei phone mad I want to know exactly what I'm doing
mishinev said:
Installation on Honor 4C fails in TWRP 3.1.0.0 aborted 7
Click to expand...
Click to collapse
Install any P8 Lite firmware or CAM firmware
ferpunk said:
It can be done just like installing any other firmware for my y6ii? Sorry but this is my first Huawei phone mad I want to know exactly what I'm doing
Click to expand...
Click to collapse
Not, unlock bootloader and install twrp, make a nandroid backup, make full wipes and flash this rom
DanteFX™ said:
Not, unlock bootloader and install twrp, make a nandroid backup, make full wipes and flash this rom
Click to expand...
Click to collapse
I mean to install the p8 Lite firmware, for this one it's everything clear also, you tell the other guy to install a CAM firmware, so it is possible from that one too?
ferpunk said:
I mean to install the p8 Lite firmware, for this one it's everything clear also, you tell the other guy to install a CAM firmware, so it is possible from that one too?
Click to expand...
Click to collapse
Ooh, sorry sorry, yes it's just like installing any other firmware
I have CHC-U01C432B503 (G Play Mini), what exactly do I have to do to install this firmware? I have bootloader unlocked, TWRP recovery installed. And also, if I want to revert back to my stock firmware will the Nandroid backup do it? Because I read on another forum that a Nandroid backup is of no use if I flash a custom ROM on my device.
The following text was copied from a Nandroid backup tutorial on CyanogenMod forum.
"CAUTION:
A nandroid backup will not be helpful if you are planning to migrate to a different ROM permanently. What I mean to say is, lets say you are flashing a Custom ROM which you already know that is stable and you can carry on using the new ROM then this nandroid backup will not be helpful. Instead you need to use Titanium Backup or Backup all data individually and then migrate all the data to the new ROM."
Hello, I'd appreciate it if you could add credits to the OpenKirin team, since I believe that you are using some of our work here.
Thanks!
XePeleato said:
Hello, I'd appreciate it if you could add credits to the OpenKirin team, since I believe that you are using some of our work here.
Thanks!
Click to expand...
Click to collapse
Yes!, If it is okay
When source code will be available?
Hi, could anyone give a picture of the Antutu Benchmark on the P8 Lite? Camera, HWC and 3D works?
Honor 4c still error 7 (i try cyanogen & honor 4c firmware mm).... huawei p8 lite cant install for my phone
DanteFX™ said:
Install any P8 Lite firmware or CAM firmware
Click to expand...
Click to collapse
Excelente ROM!
Muy buena ROM Dante, tiene unos fallos menores pero con un poco de tiempo y paciencia se pueden arreglar, felicidades por tu ROM Dante, se agradece! :good::good::good::highfive:
can't use sd card as external storage
DanteFX™ said:
Yes!, If it is okay
Click to expand...
Click to collapse
ROM is very Good....thanks to the creater but we have one main bug we cannot use SD card as external storage, only it can be used as portable storage
Glory 4x che2-Ul00 can not brush
Will be stuck in Huawei p8 youth version of the first screen, ask for a quick adaptation of the glory 4x, thank you!
What about CPU usage? Is that rom using only 1 core or more? Is camera and video playback working?
And if I have honor 4c CHM-U01 do i need to flash first p8 lite firmware?
@DanteFX™ Congratulations on the ROM. Well done. I want to try it on my Che2-L11, but one small question: What are the known bugs? Can you give some details? F.ex. what about dual sim? Video?
Good morning,
I would really appreciate some hints to solve my Problem with Honor 5X and Lineageos 14.1.
What have I done so far:
Bought a Honor 5X -> success
Unlocked bootloader officially -> success
Installed TWRP newest Version -> success
Downloaded lineageps 14.1 newest for kiwi -> success
moved lineageos zip to phone -> success
boot into recovery -> success
wipe Cache / etc -> success
install zip for lineageos 14.1 -> error 7
From reading a little bit here, I got the idea, that the bootloader is too old for lineageos 14.1. I am not an Honor Expert, but the phone Show something lime emui 3.something.
What do I have now:
Phone with:
running twrp
running fastboot
What I do not have:
adb backup of phone
twrp backup of phone
I would like to have the phone back up and running, even stock Image would be fine. Lineageos prefered.
Kind regards
Tokoloshe
tokoloshe4711 said:
Good morning,
I would really appreciate some hints to solve my Problem with Honor 5X and Lineageos 14.1.
What have I done so far:
Bought a Honor 5X -> success
Unlocked bootloader officially -> success
Installed TWRP newest Version -> success
Downloaded lineageps 14.1 newest for kiwi -> success
moved lineageos zip to phone -> success
boot into recovery -> success
wipe Cache / etc -> success
install zip for lineageos 14.1 -> error 7
From reading a little bit here, I got the idea, that the bootloader is too old for lineageos 14.1. I am not an Honor Expert, but the phone Show something lime emui 3.something.
What do I have now:
Phone with:
running twrp
running fastboot
What I do not have:
adb backup of phone
twrp backup of phone
I would like to have the phone back up and running, even stock Image would be fine. Lineageos prefered.
Kind regards
Tokoloshe
Click to expand...
Click to collapse
I guess you are still on emui3, so lollipop version Android 5.
First: update to a marshmallow Android 6 version, BUT NOT the most recent. Check with update what is the version proposed and give number here.
But you need stock recovery for that...
You should:
Unlock bootloader
Update software/Fw to Android 6 , emui 4, bxxx version <= b340.
Boot in twrp recovery : make nandroid backup1
Flash twrp recovery, flash root, check all OK and make backup2
Then with both backups, you re safe to play with custom roms.
Some more questions....
rodolphe06 said:
I guess you are still on emui3, so lollipop version Android 5.
First: update to a marshmallow Android 6 version, BUT NOT the most recent. Check with update what is the version proposed and give number here.
But you need stock recovery for that...
You should:
Unlock bootloader
Update software/Fw to Android 6 , emui 4, bxxx version <= b340.
Boot in twrp recovery : make nandroid backup1
Flash twrp recovery, flash root, check all OK and make backup2
Then with both backups, you re safe to play with custom roms.
Click to expand...
Click to collapse
Dear Rodolphe,
thanks a lot for your help.
Could you please give me some more hints?
My bootloader is already unlocked and TWRP is up and running. So far, that is done.
The phone runs now TWRP and fastboot only, nothing else.
How do I do this task: Update software/Fw to Android 6 , emui 4, bxxx version <= b340
I guess download this b340 fw/sw as a zip and install via TWRP?
Kind regards
Tokoloshe
tokoloshe4711 said:
Dear Rodolphe,
thanks a lot for your help.
Could you please give me some more hints?
Tokoloshe
Click to expand...
Click to collapse
Hi, you must return to stock recovery. Find the thread honor5x depot and get it based on model.
Then i think once stock recovery reinstalled, you can update in emui via settings>about phone.
What is **** is, if you update too much, you wont be able to flash ROM because of volte Fw. Thats why you need to check bxxx version of update to be sure to be less than b350.
Otherwise, you need to update manually with for example application firmware finder (playstore). Dont hesitate to search in threads your case. Some people may have face same request/issue
Yahooooooooo!
Partially Success!
What happened:
Read Guide KIW-L24 Back to Stock + Android 6.0.1 MM Update by clsA
Downloaded Twrp_Back_to_Stock_with _Stock_Recovery.zip
Put it on SD Card (which took a long time and needed some patience)
Boot into recovery TWRP
Restore
Reboot
There we are back in operation.
Phone says:
https://forum.xda-developers.com/picture.php?pictureid=55976&albumid=14345&dl=1501699776&thumb=1
https://forum.xda-developers.com/picture.php?pictureid=55976&albumid=14345&dl=1501699776&thumb=1
How should I continue?
I would like to
finally reach lineageos 14.1
will not loose voLTE Options etc by wrong firmware / baseband etc.
Update says no update available? I guess there is a way to install original Honor 5X Android 6?
Thanks a lot for the help already!
Greetings
Tokoloshe
tokoloshe4711 said:
Yahooooooooo!
Partially Success!
What happened:
Read Guide KIW-L24 Back to Stock + Android 6.0.1 MM Update by clsA
Downloaded Twrp_Back_to_Stock_with _Stock_Recovery.zip
Put it on SD Card (which took a long time and needed some patience)
Boot into recovery TWRP
Restore
Reboot
There we are back in operation.
Phone says:
https://forum.xda-developers.com/picture.php?pictureid=55976&albumid=14345&dl=1501699776&thumb=1
https://forum.xda-developers.com/picture.php?pictureid=55976&albumid=14345&dl=1501699776&thumb=1
How should I continue?
I would like to
finally reach lineageos 14.1
will not loose voLTE Options etc by wrong firmware / baseband etc.
Update says no update available? I guess there is a way to install original Honor 5X Android 6?
Thanks a lot for the help already!
Greetings
Tokoloshe
Click to expand...
Click to collapse
Download Marshmallow firmware manually (Google or use Firmware updater app/site) and install it via dload or via EMUI updater (5.1.1 has an "Upgrade manually" option). That's a KIW-L21? You won't get VoLTE anyway, install whatever you find for it (latest I know about is B350 CUSTC432D003, available on Polish Honor site). After that, flash TWRP and flash whatever you want.
Yahoooooo and thanks a lot again!
I have found the danish update.app for android 6, put it on MicroSD and installed it with the update app.
Now the phone
runs on Android 6.0.1
is Kiwi L21
is EMUI 4.0
is Baseband 20234,20234.
Will installing lineageos14.1 on top of this work or would I get Error 7 again?
I am a bit careful after the first try with lineageos14.1 and EMUI 3.1.
Kind regards
Tokoloshe
tokoloshe4711 said:
Now the phone
runs on Android 6.0.1
is Kiwi L21
is EMUI 4.0
is Baseband 20234,20234.
Tokoloshe
Click to expand...
Click to collapse
What is your bxxx version ?
Pictures posted above are in too low resolution to be red....
But now you should boot in twrp to make a nandroid backup of all stock with adb (find in threads).
Then you flash twrp and backup again with twrp and emui.
So in case of issues you re covered. Then try flashing los
Check hère:
https://forum.xda-developers.com/showthread.php?p=72838513#post72838513
tokoloshe4711 said:
Yahoooooo and thanks a lot again!
I have found the danish update.app for android 6, put it on MicroSD and installed it with the update app.
Now the phone
runs on Android 6.0.1
is Kiwi L21
is EMUI 4.0
is Baseband 20234,20234.
Will installing lineageos14.1 on top of this work or would I get Error 7 again?
I am a bit careful after the first try with lineageos14.1 and EMUI 3.1.
Kind regards
Tokoloshe
Click to expand...
Click to collapse
B330-B340 firmware? You're good to go.
ShadySquirrel said:
B330-B340 firmware? You're good to go.
Click to expand...
Click to collapse
B340 will be ok? The update app offers an OTA with B340.
Now I have a proper TWRP and Adebar backup (adb Linux script framework).
I will give Lineageos 14.1 a try in the next days.
Thanks a lot for the good hints.
Bye bye
Tokoloshe
tokoloshe4711 said:
B340 will be ok? The update app offers an OTA with B340.
Now I have a proper TWRP and Adebar backup (adb Linux script framework).
I will give Lineageos 14.1 a try in the next days.
Thanks a lot for the good hints.
Bye bye
Tokoloshe
Click to expand...
Click to collapse
Any non-VoLTE Marshmallow firmware will be OK. My KIW-L21 was on B350D003 before flashing, everything is great.
Finally ! Lineageos
ShadySquirrel said:
Any non-VoLTE Marshmallow firmware will be OK. My KIW-L21 was on B350D003 before flashing, everything is great.
Click to expand...
Click to collapse
Hi everybody,
it is done! The Honor 5X now runs on Lineageos.
Thanks a lot for the help and the good hints.
The reason for the problem with EMUI 3.1 and Error 7 was not obvious to me. I have read some installation guides and many of them ignore that you cannot install lineageos 14.1 up on EMUI 3.1. Good luck I found this forum.
Bye bye
Tokoloshe
tokoloshe4711 said:
Hi everybody,
it is done! The Honor 5X now runs on Lineageos.
Thanks a lot for the help and the good hints.
The reason for the problem with EMUI 3.1 and Error 7 was not obvious to me. I have read some installation guides and many of them ignore that you cannot install lineageos 14.1 up on EMUI 3.1. Good luck I found this forum.
Bye bye
Tokoloshe
Click to expand...
Click to collapse
Great! Welcome onboard on custom ROM.
I would suggest you RR,aex or crdroid if you want extra features. Of course backup your los first
Install KIW L21 B320 stock
Flash twrp
Nandroid backup
Wipe cache, dalvick cache, system, data
Flash lineage
Reboot then flash gapps and SuperSU or magisk
You will have no problems with this method