Brick amazfit bip - Amazfit

Hello, I need help with an amazfit beep, when updating in IOS to the latest version the clock was on screen a message that said "connect app to update resources".
Then I linked the clock to an android and using gadgetbridge install the res 9.40 and then the fw 9.26 then in this last step the clock did not end and it was turned off. Now I can not turn it on or in the charging base.
Help

Mine was in bricked mode since a month ago.
Was using the Notify n Fitness app, then out of sudden i decide to manually converting to another rom. the first phase was successful. but then, it restarted to 2nd phase, unfortunately it didn't managed to get there... stay in 'sleep mode' ever since.
revolutionyo said:
Hello, I need help with an amazfit beep, when updating in IOS to the latest version the clock was on screen a message that said "connect app to update resources".
Then I linked the clock to an android and using gadgetbridge install the res 9.40 and then the fw 9.26 then in this last step the clock did not end and it was turned off. Now I can not turn it on or in the charging base.
Help
Click to expand...
Click to collapse

Any status on this brick? Same happened to me few moments ago

I am with the same problem. Please, must be a solution... anyone knows something? Thanks in advance

Me2 same with this like that.

For first poster : You have to flash first FW, THEN .res.
Maybe that's why.
To flash the 2 files, i used Notify & Fitness today and all ok.
FW : 0.1.0.27
And once it's bricked, for now, I haven't seen anyone recovering it...

Mine was brick as well. I followed the tutorial of one of the thread here

vernel1008 said:
Mine was brick as well. I followed the tutorial of one of the thread here
Click to expand...
Click to collapse
Which tutorial have you followed and did it help ?
---------- Post added at 10:39 AM ---------- Previous post was at 10:38 AM ----------
My watch is not dead but it's bootlooping this is after I tried to update the latest firmware using mi fit app and it failed now mi fit app won't recognize the device it says "unable to connect please restart the Bluetooth and try again". The watch turn on with backlight then backlight turns off after few seconds and just a second after backlight turn off the watch turns off and turn on again.The watch show the correct time and have it's default watchface. Does anybody know how to resolve this issue.

vmirjolkar said:
Which tutorial have you followed and did it help ?
---------- Post added at 10:39 AM ---------- Previous post was at 10:38 AM ----------
My watch is not dead but it's bootlooping this is after I tried to update the latest firmware using mi fit app and it failed now mi fit app won't recognize the device it says "unable to connect please restart the Bluetooth and try again". The watch turn on with backlight then backlight turns off after few seconds and just a second after backlight turn off the watch turns off and turn on again.The watch show the correct time and have it's default watchface. Does anybody know how to resolve this issue.
Click to expand...
Click to collapse
We have two watches in my family and both of them have the same problem that you explained above. Have you got the solution?

vinczetibor said:
We have two watches in my family and both of them have the same problem that you explained above. Have you got the solution?
Click to expand...
Click to collapse
Same problem. As far as I understand, "brick" is not treated. There is no solution to the problem (((

Got bootloop after pair with new phone T_T
Sent from my SM-N950F using Tapatalk

vmirjolkar said:
Which tutorial have you followed and did it help ?
---------- Post added at 10:39 AM ---------- Previous post was at 10:38 AM ----------
My watch is not dead but it's bootlooping this is after I tried to update the latest firmware using mi fit app and it failed now mi fit app won't recognize the device it says "unable to connect please restart the Bluetooth and try again". The watch turn on with backlight then backlight turns off after few seconds and just a second after backlight turn off the watch turns off and turn on again.The watch show the correct time and have it's default watchface. Does anybody know how to resolve this issue.
Click to expand...
Click to collapse
Hi There,
I'm also facing the bootlopping issue, I tried using another phone to pair. after many tries, I;m able to see the paring screen but I;m unable to press the 'Tick' icon then after awhile it will auto reboot again.
have you found a way to fix it yet?

alfenneo said:
Hi There,
I'm also facing the bootlopping issue, I tried using another phone to pair. after many tries, I;m able to see the paring screen but I;m unable to press the 'Tick' icon then after awhile it will auto reboot again.
have you found a way to fix it yet?
Click to expand...
Click to collapse
I haven't found fix for this one.
https://www.tuttoandroid.net/xiaomi/scopriamo-un-amazfit-bip-un-teardown-inconsueto-525801/
I came across the above link regarding the teardown of amzefit bip and it says if the wrong firmware is flashed and if the watch bricks it can be unbricked by using the testing points available on motherboard of the watch. I don't have a decent electronics background so didn't understood it.
Finally I just understood that it's possible but, not for common user like me (unless someone creates a proper tutorial)

Hi,
I have the same issue.
Do you find something ?
Regards
Envoyé de mon LG-H870DS en utilisant Tapatalk

I have the same problem, bootloop and can't connect anymore:/

Related

[Q] Sony Ericsson Live with Walkman(wt19i) restarting problem

my LWW turned off when a application download. After when power on restarting repeatedly. It not happen when without sim card. PLEASE HELP ME!!!
rajitha455 said:
my LWW turned off when a application download. After when power on restarting repeatedly. It not happen when without sim card. PLEASE HELP ME!!!
Click to expand...
Click to collapse
Did you download the application from playstore or any other site (could be a virus)?
A factory reset should solve the problem. But if you have root, backup your data first :good:
mihahn said:
Did you download the application from playstore or any other site (could be a virus)?
A factory reset should solve the problem. But if you have root, backup your data first :good:
Click to expand...
Click to collapse
i did it. but problem keeping. it only happen when SIM card entered. specially in 3G coverage. now i use my phone for only gaming and music (without SIM).
rajitha455 said:
i did it. but problem keeping. it only happen when SIM card entered. specially in 3G coverage. now i use my phone for only gaming and music (without SIM).
Click to expand...
Click to collapse
If your bootloader is locked and you still have your warranty, send it to sony and they should fix it for you
mihahn said:
If your bootloader is locked and you still have your warranty, send it to sony and they should fix it for you
Click to expand...
Click to collapse
how much time sony warrant??
1 Year
rajitha455 said:
how much time sony warrant??
Click to expand...
Click to collapse
Depends on the country I guess. I think I had 2 years (not sure). But you could just write an email to the sony support with your IMEI and the date when you bought your phone. They should be able to tell you if you're still under warranty
rajitha455 said:
my LWW turned off when a application download. After when power on restarting repeatedly. It not happen when without sim card. PLEASE HELP ME!!!
Click to expand...
Click to collapse
Flash it...dont restore ny data from ur backup
Sent from my wt19i using xda premium
Rebooting issue is resolved for me
Hi,
Actually after updating my phone (SE Live with Walkman) to ICS, once I switch my Bluetooth on, my phone gets restarted again and again.
I was searching for the solutions everywhere in the world..))
But finally I realize that i'm having a small delay in next restart of my phone.
So, in that time I quickly went to Settings and turned my Bluetooth Off. Now it's working fine.
And I decided not to use my Bluetooth anymore... (till the time I reach Sony Ericsson mobile service center)
Hope you also may have a chance to resolve the issue. (Temporarily at least)
vmatheshwaran said:
Hi,
Actually after updating my phone (SE Live with Walkman) to ICS, once I switch my Bluetooth on, my phone gets restarted again and again.
I was searching for the solutions everywhere in the world..))
But finally I realize that i'm having a small delay in next restart of my phone.
So, in that time I quickly went to Settings and turned my Bluetooth Off. Now it's working fine.
And I decided not to use my Bluetooth anymore... (till the time I reach Sony Ericsson mobile service center)
Hope you also may have a chance to resolve the issue. (Temporarily at least)
Click to expand...
Click to collapse
Hey , Your Xperia phone without Bluetooth is very Bad !
Try to flash your stock .ftf ROM again after full wiping , every thing should work fine :angel:
Facing the same problem PLEASE HELP..!!!!
vmatheshwaran said:
Hi,
Actually after updating my phone (SE Live with Walkman) to ICS, once I switch my Bluetooth on, my phone gets restarted again and again.
I was searching for the solutions everywhere in the world..))
But finally I realize that i'm having a small delay in next restart of my phone.
So, in that time I quickly went to Settings and turned my Bluetooth Off. Now it's working fine.
And I decided not to use my Bluetooth anymore... (till the time I reach Sony Ericsson mobile service center)
Hope you also may have a chance to resolve the issue. (Temporarily at least)
Click to expand...
Click to collapse
But Brother How to go till the settings option ...????
My cell is getting restart again and again in no time... please suggest me some solution by which my contacts and other data wont get lost...
---------- Post added at 06:32 PM ---------- Previous post was at 06:23 PM ----------
How to go till the settings option ...????
My cell is getting restart again and again in no time...
please suggest me some solution by which my contacts and other data wont get lost...
I tried pressing my power button n volume rocker lower butten pressing tog. fr 20seconds but even that is not working...
P.S and Help
rajitha455 said:
my LWW turned off when a application download. After when power on restarting repeatedly. It not happen when without sim card. PLEASE HELP ME!!!
Click to expand...
Click to collapse
try starting without sd card
Kme001 said:
But Brother How to go till the settings option ...????
My cell is getting restart again and again in no time... please suggest me some solution by which my contacts and other data wont get lost...
---------- Post added at 06:32 PM ---------- Previous post was at 06:23 PM ----------
How to go till the settings option ...????
My cell is getting restart again and again in no time...
please suggest me some solution by which my contacts and other data wont get lost...
I tried pressing my power button n volume rocker lower butten pressing tog. fr 20seconds but even that is not working...
P.S and Help
Click to expand...
Click to collapse
This happened to me Once, had to Flash the Stock ICS once again to get my phone working.... :crying:
try flashing Stock Ics rom again , it'll work , but you'll lose all ur contacts and Data .......
Tell me how to root..
Xperia~Man said:
Hey , Your Xperia phone without Bluetooth is very Bad !
Try to flash your stock .ftf ROM again after full wiping , every thing should work fine :angel:
Click to expand...
Click to collapse
I have mistakenly switched on Bluetooth again. So, the problem starts.
This time I can't even see my HomeScreen to off the bluetooth..
When I'm trying to root my Phone using the below list of process.. I'm facing issue since my USB Debugging is Off
forum.xda-developers.com/showthread.php?t=1695514
Please help me how to Root my Mobile..
vmatheshwaran said:
I have mistakenly switched on Bluetooth again. So, the problem starts.
This time I can't even see my HomeScreen to off the bluetooth..
When I'm trying to root my Phone using the below list of process.. I'm facing issue since my USB Debugging is Off
forum.xda-developers.com/showthread.php?t=1695514
Please help me how to Root my Mobile..
Click to expand...
Click to collapse
can u find the IMEI number??
Yes I Found..
rajitha455 said:
can u find the IMEI number??
Click to expand...
Click to collapse
Yes I found, what should I do with that...?
regards,
Matheshwaran V
vmatheshwaran said:
Yes I found, what should I do with that...?
regards,
Matheshwaran V
Click to expand...
Click to collapse
unlock your bootloader at http://unlockbootloader.sonymobile.com/
flash extended stock kernel http://forum.xda-developers.com/showthread.php?t=1694027 via fastboot(for ics only)
you get a rooted device with custom rom
else if you want to have locked bootloader follow this effective guide by mihahn http://forum.xda-developers.com/showthread.php?t=1842366
vmatheshwaran said:
Yes I found, what should I do with that...?
regards,
Matheshwaran V
Click to expand...
Click to collapse
flash a kernel that suite to ur selected ROM (gb, ics or jb)
I prefer Mesa Hybrid kernel for CyanogenMod based roms http://forum.xda-developers.com/showthread.php?t=1715679
u can flash any kernel using flashtool http://forum.xda-developers.com/showthread.php?t=1879982
after flash a kernel, then flash a ROM
HERE is a list roms, kernels and other stuffs: http://forum.xda-developers.com/showthread.php?t=2148684
My Phone is Sony Ericsson Live With Walkman
I Have Also Restart Problem
But Don't How To Go Recovery Mode On Phone
Please Help Me
vmatheshwaran said:
I have mistakenly switched on Bluetooth again. So, the problem starts.
This time I can't even see my HomeScreen to off the bluetooth..
When I'm trying to root my Phone using the below list of process.. I'm facing issue since my USB Debugging is Off
forum.xda-developers.com/showthread.php?t=1695514
Please help me how to Root my Mobile..
Click to expand...
Click to collapse
Remove both sd card and sim. And then try to switch off Bluetooth by dropping notification panel and selecting setting option there. You see the screen doesn't show anything so we have to imagine the setting option and touch the Bluetooth toggle switch. It's all imaginary.. I've done this 4-5 times. But you've to be patient enough.
If still you're unable to understand the process kindly reply with your email. I'll make a video and share it with you all.

Amazfit BIP - Installed Firmware via gadgetbridge - Bricked

Hi,
I installed the 9.14 firmware as instructed on a previous thread.
The uploading of the res and fw file completed in the amazfit bip. However the amazfit reboot and its not opening since.
12hrs already passed and still its not turning on.
What I noticed is that the bluetooth signal can be detected by other phones. Then I can connect via Ble Scanner but it will disconnect.
Is there a way to force flash the firmware?
Thank you.
Same problem here.
Same. Anyway solution so far?
vernel1008 said:
Hi,
I installed the 9.14 firmware as instructed on a previous thread.
The uploading of the res and fw file completed in the amazfit bip. However the amazfit reboot and its not opening since.
12hrs already passed and still its not turning on.
What I noticed is that the bluetooth signal can be detected by other phones. Then I can connect via Ble Scanner but it will disconnect.
Is there a way to force flash the firmware?
Thank you.
Click to expand...
Click to collapse
Only one idea: Delete Gadgetbride, restart your Phone, install Mi Fit-App, Switch your Phone language to english (If isn't) and try to install Firmware again.
HTH
I had the same problem, i was desperate and ready to throw it away, but i finally did what urs1956 said and it worked!! (Only thing is that i paired it with an other device at first).
i am the same probleme but juste uptdate firmware with mi fit... and black screen... bricked...
Nothing work.
Hello,
I have the same issue (black screen) after installed a firmware french, the watch started to upload the new chinise version 1.0.80 when I appaired again the watch with mifit and instead restart : black screen.....
I see the watch in bluetooth but I can't appair it again !!!
Some ideas?
jrebillard said:
Hello,
I have the same issue (black screen) after installed a firmware french, the watch started to upload the new chinise version 1.0.80 when I appaired again the watch with mifit and instead restart : black screen.....
I see the watch in bluetooth but I can't appair it again !!!
Some ideas?
Click to expand...
Click to collapse
Me. too
sleep in black screen.
My conversation with Amazfit/Huasmi
Molly (Amazfit)
Feb 10, 00:47 PST
Hello,
Thank you for contacting Amazfit.
We are very sorry that you have trouble with your device.
Have you ever flashed the ROM of your watch?
Can you please send us a screenshot of your watch screen?
If the screen turned off, please charge it to have a try.
If it doesn't work, please remove the device from the charger, put it on the table, make it untouched for 24-48 hours to let the battery drains and then charge it to see if it solves the issue.
If your issue persists, please get touch with the seller to return the device to have it examined.
Thank you for your understanding!
Sincerely,
Molly | Amazfit Support
Feb 9, 16:19 PST
Amazfit BIP bricked after firmware update: Hi,
I did a firmware update which apparently failed as since then the watch will show a black screen only.
The watch is discoverable in the android bluetooth settings, however, I cannot pair or connect to it.
Is there any way of "forcing" an update via bluetooth?
Kind regards
That same answer from support.
wait for battery drains and then charge it << Not resolve this problem.
I'm wait sinc Last month until now. It's sleeping.
https://amazfitwatchfaces.com/cor/
any news?
Hello,
i have a bricked Amazfit BIP so i decided to open it up.
I saw there is a Winbond 25Q64FWIQ flash onboard, so i'm wondering if anyone has a flash dump to try to reflash mine with a chip programmer

Bricked Amazfit midong / cor ?

Hello there!
I upgraded my midong to the last CN firmware by mistake and I tried to downgrade to 1.0.5.60 English using notify&fitness app
The process was shown as completed and successful, but my midong is working with a black screen and it doesn't connect by Bluetooth.
Anyone with the same problem?
Is there any way to soft/hard reset and install fw again?
BLE Scanner detects the midong but its unable to discover services/connect
Thx guys for your help! :crying:
The black screen is because the correct file is missing (thats no problem)!
But have you tried with a few devices? Maybe your main flash device has a bluetooth mac adress conflict?!
Iesok said:
Hello there!
I upgraded my midong to the last CN firmware by mistake and I tried to downgrade to 1.0.5.60 English using notify&fitness app
The process was shown as completed and successful, but my midong is working with a black screen and it doesn't connect by Bluetooth.
Anyone with the same problem?
Is there any way to soft/hard reset and install fw again?
BLE Scanner detects the midong but its unable to discover services/connect
Thx guys for your help! :crying:
Click to expand...
Click to collapse
Did you get any solution to the black screen. My amazfit cor stucked in this black screen after a firmware downgrade, and It does not connect through bluetooth.
Hey I have a similar problem too.... black screen, oddly I can see it via Bluetooth but cannot connect. I am at odds on trying to figure out another way to send the missing file. Any other ideas on this?
mine got stuck while trying to do its own update, it keeps trying to connect and appears like it does when you accept the prompt on the screen but then the app kicks it back and says it didnt connect...its 2 weeks old and they have no solutions for this ?
dustylax said:
mine got stuck while trying to do its own update, it keeps trying to connect and appears like it does when you accept the prompt on the screen but then the app kicks it back and says it didnt connect...its 2 weeks old and they have no solutions for this ?
Click to expand...
Click to collapse
Mine also started doing this yesterday. I've had mine for 6 months now. Wonder if it was maybe some update that caused it? Have you found a solution yet?
Solution
After upload a watchface i also got the black screen
For me the solution was open mi fit go to profile/amazfit cor\display settings\ make any change in the items order and save
dustylax said:
mine got stuck while trying to do its own update, it keeps trying to connect and appears like it does when you accept the prompt on the screen but then the app kicks it back and says it didnt connect...its 2 weeks old and they have no solutions for this ?
Click to expand...
Click to collapse
Exactly same problem here. It did its own update in March and then can't pair it up to updgrade or downgrade anymore. Bricked.
Working again
So my Amazfit Cor is working again. I let the battery drain (almost took 2 months) and after the restart, the pairing worked again.

Phone can't even pass the system configuration

Hello mates!
I've sold my Pocophone a while ago and it was working as supposed to. I don't know what the person did but the phone went to the system configuration as if someone did a factory reset or something but it a mess.
When the setup starts it shows a message "Android Setup isn't responding" with a Wait or Ok option.
After a while the message "Android Setup Keeps stopping" also appers.
After that it starts the confituration but when it asks me to connect to WiFi it's completely blank. No WiFi options is showed in the screen.
I can skip that and continue the configuration but in the end a message is showed saying that I didn't configurate a Google Account and it puts me back to the beggining of the configuration.
I've tried a wipe data in recovery menu but nothing changed.
Edit: after I noticed that I can access de notification bar and the configurations of the phone. I discovered that it's using Android 10.0.4.0 and that I can't access WiFi button or configuration. WiFi button is not clickable and the configuration menu is blank and if I wait some long time the options appears but when I click to activete WiFi it says that is activanting but the button comes back to original position.
Edit 2: with Mi Flash Pro I could install the latest version of the system (10.0.6.0) but nothing changed. I noticed that in this configuration menu after a while the phone reboots.
Edit 3: Now I've found something bizarre. Baseband version is unknown. I think that most of the problems maybe is connected to that.
antonioli84 said:
Hello mates!
Edit 2: with Mi Flash Pro I could install the latest version of the system (10.0.6.0) but nothing changed. I noticed that in this configuration menu after a while the phone reboots.
Edit 3: Now I've found something bizarre. Baseband version is unknown. I think that most of the problems maybe is connected to that.
Click to expand...
Click to collapse
Latest version of miui is MIUI 11 (11.0.6.0).
If the baseband version is unknown it means you have corrupted the modem. Your IMEI number is also gone and you can't use your SIM services.
---------- Post added at 01:16 PM ---------- Previous post was at 01:07 PM ----------
antonioli84 said:
Hello mates!
I've sold my Pocophone a while ago and it was working as supposed to. I don't know what the person did but the phone went to the system configuration as if someone did a factory reset or something but it a mess.
When the setup starts it shows a message "Android Setup isn't responding" with a Wait or Ok option.
After a while the message "Android Setup Keeps stopping" also appers.
After that it starts the confituration but when it asks me to connect to WiFi it's completely blank. No WiFi options is showed in the screen.
I can skip that and continue the configuration but in the end a message is showed saying that I didn't configurate a Google Account and it puts me back to the beggining to that.
Click to expand...
Click to collapse
There are two setups in miui, one is done by miui and second is done by google. So try setting up your phone both times without google account. Once you've made it to the launcher you can figure out the problems.
callmebutcher101 said:
Latest version of miui is MIUI 11 (11.0.6.0).
If the baseband version is unknown it means you have corrupted the modem. Your IMEI number is also gone and you can't use your SIM services.
---------- Post added at 01:16 PM ---------- Previous post was at 01:07 PM ----------
There are two setups in miui, one is done by miui and second is done by google. So try setting up your phone both times without google account. Once you've made it to the launcher you can figure out the problems.
Click to expand...
Click to collapse
Thank you for the reply.
That day after hard reset again and knock a little bit the phone, all of sudden the unkwown status changed and the WiFi worked. But was intermittent and also all of sudden the WiFi stopped and sometimes worked on next boot and sometimes not showing again unknown. Sometimes the phone rebooted by itself.
Something is weird with the phone and I don't know if it's physical or software issue.
I returned the phone to the owner. I'm sorry I wrote 10.0.6.0 but it's 11.0.6.0.

gtr 47 please open the app, and select "check for updates"

Help me!!
gtr 47 please open the app, and select "check for updates" on the watch device page to continue update.
boymac said:
Help me!!
gtr 47 please open the app, and select "check for updates" on the watch device page to continue update.
Click to expand...
Click to collapse
Hello friend, it seems it corrupted the firmware update,
No need to panic, please explain what you where trying to do?
You tried to rollback the firmware with other app, like notify & fitness ,
or you tried to update the watch through official Mi Fit?
In any case, what files did it installed succesfully, the Firmware, the res, the font or the Gps?
And what version of the fw where you trying to update?
Rizla46
Rizla46 said:
Hello friend, it seems it corrupted the firmware update,
No need to panic, please explain what you where trying to do?
You tried to rollback the firmware with other app, like notify & fitness ,
or you tried to update the watch through official Mi Fit?
In any case, what files did it installed succesfully, the Firmware, the res, the font or the Gps?
And what version of the fw where you trying to update?
Rizla46
Click to expand...
Click to collapse
hi, i have the same problem and i only have problems updating the fonts. can you help?
rubio0203 said:
hi, i have the same problem and i only have problems updating the fonts. can you help?
Click to expand...
Click to collapse
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Rizla46 said:
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Click to expand...
Click to collapse
Hello I have the same issue, I think the watch did an OTA update however
It cannot get fonts to install!.
I have:
firmware (1.3.6.06): Updated
Basic Resources (V14): Not updated
Resources (V58): No updated
Fonts (V11): Not updated
GPS: Updated
Latest Zeep from Google Play
Is there a way of going back to the previous firmware release?
Thanks
Rizla46 said:
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Click to expand...
Click to collapse
Hello I have the same issue, I think the watch did an OTA update however
It cannot get fonts to install!.
I have:
firmware: 1.3.6.06
Ltates Zeep from Google Play
Is there a way of going back to the previous firmware release?
Thanks
Rizla46 said:
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Click to expand...
Click to collapse
Hello I have the same issue, I think the watch did an OTA update however
It cannot get fonts to install!.
I have:
firmware: 1.3.6.06
Ltates Zeep from Google Play
Is there a way of going back to the previous firmware release?
Thanks
j77moduss said:
Hello I have the same issue, I think the watch did an OTA update however
It cannot get fonts to install!.
I have:
firmware: 1.3.6.06
Ltates Zeep from Google Play
Is there a way of going back to the previous firmware release?
Thanks
Click to expand...
Click to collapse
Hello again, Yes, you can download Notify & Fitness for Amazfit(Green Logo), You Download from here (XDA Developers) a previous version to downgrade, and when you complete, you run again Zepp oficcial, for update.
If the downgrade can't complete, select to update from notify, and choose stock firmware!
in many cases can't update correct to the latest firmware.
Also If you have mi fit in the phone, uninstall it, because the devise gets confused with both (Zepp and Mi Fit) and if you have the magiacal unicorn Zepp Edition, you should have the online update setting on.
Rizla46 said:
Hello again, Yes, you can download Notify & Fitness for Amazfit(Green Logo), You Download from here (XDA Developers) a previous version to downgrade, and when you complete, you run again Zepp oficcial, for update.
If the downgrade can't complete, select to update from notify, and choose stock firmware!
in many cases can't update correct to the latest firmware.
Also If you have mi fit in the phone, uninstall it, because the devise gets confused with both (Zepp and Mi Fit) and if you have the magiacal unicorn Zepp Edition, you should have the online update setting on.
Click to expand...
Click to collapse
Hello I tried to down grade unsuccessfully using Notify and Fitness but it fails trying to update Fonts!. It is the same error that I get in Zepp oficial.
Any other suggestions?
Thanks
j77moduss said:
Hello I tried to down grade unsuccessfully using Notify and Fitness but it fails trying to update Fonts!. It is the same error that I get in Zepp oficial.
Any other suggestions?
Thanks
Click to expand...
Click to collapse
I had the same problem in 2 cases, but with notiffy and after some tries, it managed to downgrade the fw file, and when I connected in zepp it updated the fonts succesfully.
But it took over 3-4 times in each case through notify.
Hello, could you let me know the version you used to downgrade and where I can download it.
Thanks
j77moduss said:
Hello, could you let me know the version you used to downgrade and where I can download it.
Thanks
Click to expand...
Click to collapse
the one that suggested notify as stock.
Rizla46 said:
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Click to expand...
Click to collapse
I don't have mifit, I had zepp aex 5.4.0 and the watch on version 1.3.7.17. Trust when I tell you I have try everything. Downgrade all version, install all app version since the watch came out, and nothing woks. I use notify and fitness to do does downgrades and always fail at fonts, I had some luck getting the phone to work, but I went crazy and did the update to the Last version and then again the problem with the fonts. Open to suggestions
well, i guess its the end, after the new update 1.3.7.17 i cant dowgrade to any version. always fail, im trying to downgrade to 1.3.4.14.
News, I managed to get the watch in to home screen and use it with all functions. The problem, I can barely see the screen, it's a glitch I think, I can unly do this with the charger connected and sending two notifications to the watch and pressing the power button. I can use the watch and do everything but when I disconnect the charger or leave it for a time back to "please open the app and select check for updates". Trying to do something new I'll be posting soon.
rubio0203 said:
News, I managed to get the watch in to home screen and use it with all functions. The problem, I can barely see the screen, it's a glitch I think, I can unly do this with the charger connected and sending two notifications to the watch and pressing the power button. I can use the watch and do everything but when I disconnect the charger or leave it for a time back to "please open the app and select check for updates". Trying to do something new I'll be posting soon.
Click to expand...
Click to collapse
As you describe it, there are many issues to the device, there is a chance to be a faulty device.
Contact huami if you are still in guarantee.
for the one case I rolled back the firmware, the problem was that it didn't updated the fonts correctly, and the screen was going on and of instantly, but when I managed to rollback, and update the new firmware successfully , the problem was corrected.
Also when you go for official last update (if you rollback) choose official Zepp, Not AEX or Magical unicorn's.
And Don't disconnect the device from app or bluetooth, while the hole procedure (All files) are updated.
Also you can download a previous official version of zepp, and it will update automatically the firmware that was distributed on the specific version of zepp
Rizla46 said:
As you describe it, there are many issues to the device, there is a chance to be a faulty device.
Contact huami if you are still in guarantee.
for the one case I rolled back the firmware, the problem was that it didn't updated the fonts correctly, and the screen was going on and of instantly, but when I managed to rollback, and update the new firmware successfully , the problem was corrected.
Also when you go for official last update (if you rollback) choose official Zepp, Not AEX or Magical unicorn's.
And Don't disconnect the device from app or bluetooth, while the hole procedure (All files) are updated.
Also you can download a previous official version of zepp, and it will update automatically the firmware that was distributed on the specific version of zepp
Click to expand...
Click to collapse
thaks for the reply. i have this in mind, i can downgrade to any version with notify and fitness, maeby if i go to the version when the problem happens i can manage to update the firmware. ill give it a try.
Can we stop the Zepp app from auto updating? When I last opened the app it instantly triggered my watch update without warning me. The worsts part was that my battery was low near 10% which is very risky.
My condition is worse than yours...
I'm also stuck on the same screen as in the picture you sent & I can not install anything.
If I try to update anything or even upload a design background to the watch, I get an error message and the watch restarts. :crying:
AlonHagai said:
My condition is worse than yours...
I'm also stuck on the same screen as in the picture you sent & I can not install anything.
If I try to update anything or even upload a design background to the watch, I get an error message and the watch restarts. :crying:
Click to expand...
Click to collapse
you managed to solve the problem?

Categories

Resources