Thanks to @ScrewTSW he found at http://www.htcmania.com a working TWRP Recovery from totmakina
found : http://www.htcmania.com/showthread.php?p=27398885
to reboot into recovery most elephones works with hold vol+ and power at the same time.
this method dont work for the S8 and i did not found a working method yet.
but its not a problem if you follow this:
1. download all files and place them on your desktop
2. flash my modified boot.img (magisk root) with flashtools
3. flash TWRP recovery with flashtools
4. reboot the Phone and install magisk manager app (link https://www.apkmirror.com/apk/topjohnwu/magisk-manager/)
5. start magisk manager , it will tell you that your phone has root
6. go to playstore and download the app called reboot recovery ( its a very small app)
7. reboot to recovery.
8. done
Related
Helo friends, I am new to redmi note 3 (sd). I officially unlocked the boot loader. I updated my device to 7.3.2 using miflash. I tried to install TWRP. I flashed the TWRP img and modified img. I tried to enter TWRP by pressing vol+ & power button. BUT no recovery was found . Simply Phone with cable image is showing in display. I followed all the steps carefully. I tried Cofface version and also the latest one.
Somebody please guide me step by step procedure to install TWRP. Somebody have the proper modified image for 7.3.2??? If yes means please give me the link.
In 7.1.8 i was able to get the TWRP. Is there any way to update to miui 7.3.2 by TWRP from 7.1.8
MIUI overwrites your recovery, disable it with the ALKA recovery, which can be found in Santosh's thread.
Here is what I did, to make TWRP workable, and it's very easy, no pc needed.
1. Install flashify
2. Install twrp with flashify but do not reboot yet
3. copy alka twrp to your phone
4. when it's done reboot your phone in flashify (right corner, reboot to recovery)
5. make system r/w (you will lose ota but screw it..., no other way to make twrp permanent on the phone)
6. flash alka update
7. reboot in twrp -> system
8. TWRP will give you a pop-up which tells you that you would like to disable the stock recovery, and just simply allow it to do it.
9. boom, done
Thanks bro!!!!!!!
Now i got both root and recovery on 7.3.2
balazs312 said:
MIUI overwrites your recovery, disable it with the ALKA recovery, which can be found in Santosh's thread.
Here is what I did, to make TWRP workable, and it's very easy, no pc needed.
1. Install flashify
2. Install twrp with flashify but do not reboot yet
3. copy alka twrp to your phone
4. when it's done reboot your phone in flashify (right corner, reboot to recovery)
5. make system r/w (you will lose ota but screw it..., no other way to make twrp permanent on the phone)
6. flash alka update
7. reboot in twrp -> system
8. TWRP will give you a pop-up which tells you that you would like to disable the stock recovery, and just simply allow it to do it.
9. boom, done
Click to expand...
Click to collapse
as for me the app freezes when I try to install twrp leaving me with a recovery-less phone help!
pandyajoe said:
Helo friends, I am new to redmi note 3 (sd). I officially unlocked the boot loader. I updated my device to 7.3.2 using miflash. I tried to install TWRP. I flashed the TWRP img and modified img. I tried to enter TWRP by pressing vol+ & power button. BUT no recovery was found . Simply Phone with cable image is showing in display. I followed all the steps carefully. I tried Cofface version and also the latest one.
Somebody please guide me step by step procedure to install TWRP. Somebody have the proper modified image for 7.3.2??? If yes means please give me the link.
In 7.1.8 i was able to get the TWRP. Is there any way to update to miui 7.3.2 by TWRP from 7.1.8
Click to expand...
Click to collapse
Tried to used this the latest from miui forum, redmi note 3 pro Snapdragon version: http://en.miui.com/thread-296053-1-1.html
Sent from my Redmi Note 3 using XDA-Developers mobile app
I tried to flash twrp recovery image but i can't boot to recovery
Also tried philz... make the phone freeze on boot
Please anyone help me !!
Thanks in advance ?
anyone????
anything guyzz????
here is twrp
Sh3R3iF said:
I tried to flash twrp recovery image but i can't boot to recovery
Also tried philz... make the phone freeze on boot
Please anyone help me !!
Thanks in advance ?
Click to expand...
Click to collapse
i got this same issue i like you.
i succeed in doing it with fastboot cmd commands
make sure to backup phone because i lost every thing after flashing recovery.
but it works well
Root Infinix Zero 4 Plus
all you need to root infinix z4 + nougat is
1. firmware marshmallow
2. SP flashtool
3. USB driver
4. twrp
5. supersu
6. firmware nougat
Link firmware
step of installation
1. make sure the driver is installed on your computer
2. flash your device with sp flashtool using marshmallow firmware
3. after flashing, turn on your device as usual and put supersu , twrp and firmware nougat on memory then turn off the device
4. flash your recovery to twrp with sp flashtool
5. then go to recovery mode with use combination button (vol-up + power)
6. install zip supersu then reboot system (your system was rooted on marshmallow firmware)
7. flash your recovery.img with default marshmallow recovery with sp flashtool (juct check recovery.img) then rebot system
7. after that the system updates to Nougat by means of local updates
8. flash recovery again to twrp recovery, reboot to twrp recovery then flash super su again
9. finish. You have rooted z4 + nougat,, sorry bad english:silly:
Info
Thank you for the info guys.
It is posible to get Magisk 15.3 working on b183 (EU version)?
I did:
1. flash b120 with HWOTA
2. flash b183 with Firmware Finder
3. install TWRP-3.1.1.1_120_130_170 (this one should preserve navigation buttons and camera flash working)
4. format data
5. install magisk 15.3
6. got bootloop
I also tried to format data after flashing Magisk, nothing changed... Recovery boot and system in TWRP didn't help, I had to flash b120 and than b183 again.
EDIT:
Problem solved:
1. flash b120 (https://yadi.sk/d/Y2yuM--73Lb9Kk) with HWOTA (https://forum.xda-developers.com/showpost.php?p=74999398&postcount=129)
2. flash b183 with FF
3. unlock bootloader
4. extract BOOT.img from b183 UPDATE.APP (Huawei Update Extractor: https://forum.xda-developers.com/showthread.php?t=2433454)
5. install Magisk Manager app
6. in Magisk Manager patch BOOT.img with Magisk zip (click Install -> Patch Boot Image File), copy patched_boot.img to PC
7. reboot into fastboot and flash patched_boot.img (command: "fastboot flash boot patched_boot.img")
8. DONE! Nav buttons working, camera flash working, Magisk working...
PS.: Sorry for my bad English.
Have you tried to use Magisk.zip with sideload method ??
k1ks said:
Have you tried to use Magisk.zip with sideload method ??
Click to expand...
Click to collapse
No. Is the difference between flash in TWRP and with sideload?
copantok said:
No. Is the difference between flash in TWRP and with sideload?
Click to expand...
Click to collapse
TRwp available isnt fully functionnel and dont manage encrypted data . Its the problem.
Do not flash it within a twrp ==> Bootloop...
Sideload method is an alternative , work with SuperSu Sr3/4/5 2.82.
Installing supersu sr5 from usb-otg or sdcard once in twrp is working.
Concerning magisk, i did not tried but :
Could you try just after installing magisk on twrp, to boot straight to bootloader to flash stock recovery, then boot straight to stock recovery and perform a wipe & format. Then you could finally boot to system.
oslo83 said:
Installing supersu sr5 from usb-otg or sdcard once in twrp is working.
Concerning magisk, i did not tried but :
Could you try just after installing magisk on twrp, to boot straight to bootloader to flash stock recovery, then boot straight to stock recovery and perform a wipe & format. Then you could finally boot to system.
Click to expand...
Click to collapse
This worked!!! (but I lost nav buttons and camera flash, probably due to TWRP while flashing Magisk)
Tomorrow I will try again reinstall b120 with HWOTA (to get nav buttons and flash working) then b183 with FF and install Magisk with Magisk Manager (extract BOOT.img from UPDATE.app, patch it with Magisk Manager and flash patched boot with fastboot, without TWRP).
Thank you!!!
Keep us informed.
---------- Post added at 02:24 ---------- Previous post was at 02:21 ----------
By the way, with this twrp the capacitives buttons are not broken on B183:
https://mega.nz/#!WVhkwQjY!ND1Qo3kmoXP0qI_IlRHVXdxHZ3fES-ze_mPsSc_Bpg4
SOLVED!
After flashing b120 (HWOTA) and b183 (FF), unlock, patched BOOT.img with Magisk Manager and flashed patched_boot.img with fastboot. Magisk working, nav buttons working, camera flash working!
On B183 with magisk 15.3 root is working fine but i don't manage to get magisk hide to work nor safetynet...
ok I will explain what I really did to stuck in this problem 1- install stock rom for my device Samsung j5 (j530f) using Odin and device open normally 2- install magisk apk also install zip file and enable using-debugging button and OEM button 3- install TWRP using Odin also (but I have done a mistake here I am not unticked auto reboot checkbox ) 3-after that I tried to install magisk in TWRP i am not found magisk file as video mentioned i swear I doesn't make anything there so I reboot my system and stuck in it and when I press power while bootlooping he go to TWRP I tried re-install stock rom after wibe all data and format system after Odin finish and reboot !!now go to TWRP direct what should I do
amigo2020 said:
ok I will explain what I really did to stuck in this problem 1- install stock rom for my device Samsung j5 (j530f) using Odin and device open normally 2- install magisk apk also install zip file and enable using-debugging button and OEM button 3- install TWRP using Odin also (but I have done a mistake here I am not unticked auto reboot checkbox ) 3-after that I tried to install magisk in TWRP i am not found magisk file as video mentioned i swear I doesn't make anything there so I reboot my system and stuck in it and when I press power while bootlooping he go to TWRP I tried re-install stock rom after wibe all data and format system after Odin finish and reboot !!now go to TWRP direct what should I do
Click to expand...
Click to collapse
Did you flashed stock rom correctly after bootloop?
I've tryed someany time to install twrp with magsik pls help
How do I install twerp recovery with magsik with out root or pc or 2 phones
twrp does not exist for this phone officially yet.
you also need an unlocked bootloader and root in order to flash anything
Oh ok but how do I root my phone I've tryed for so long
0. Unlock bootloader
1. Flash Twrp via pc (twrp is optional for rooting)
2. Get boot.img from base rom
3. Instal magisk on device
4. Modify the boot.img via magisk (this will create another patched image titled "magisk_patched-#####_#####.img"
5. Flash newly created magisk modified boot image ie. Titled "magisk_patched-#####_#####.img" via pc (this will temp. Root device)
6. On reboot open magisk, run the same newly flashed image ie. Titled "magisk_patched-#####_#####.img"through magisk via "direct install (recommended)" method. (this will fully root device and give root access to twrp)
7. Profit
Btw not responsible if you brick your device