Charging disconnects when adding a QI wireless charging module - Xperia Z5 Compact Q&A, Help & Troubleshooting

Sorry, wrong part of the forum.
Can a moderator please delete this thread?

Related

wireless charging

Does it have it out of the box? I have the pad already for my dinc 2
No the battery cover that comes with it will not do wireless charging. I think there is already a long post about this.
my bad, please delete me

[Q] STweaks Power Settings

I have been using my Note II to connect to my appradio 2 head unit in my car. I have a 2.1amp charger in there and it is connected via a microusb cable but the phone is clearly not receiving the same rate of charge as the wall charger. Even while charging and with the screen completely dimmed it drains the battery quite significantly, especially when streaming music or using navigation.
I am running the perseus kernel and have STweaks and want to know if it is safe to raise the SDP Input and/or Charge Current rates from 475mA to something around 1800 or 1700 mA in the Power tab? I am assuming this is the bottleneck preventing my phone from charging fast in my car as I have tried a few different chargers.
Any info on this would be greatly appreciated
So I did a little testing and it seems both my chargers are working at full charge when not plugged directly in to the phone according to the galaxy charging current. The problem is in order to use the head unit in my car the charge must go through the MHL adapter. Will changing the SDP Charge Current setting in STweaks fix the bottleneck through the adapter? I would try it but I don't want to break my adapter or phone.
EDIT: Changed the SDP Charge setting to max and it is working great in my car with the MHL adapter and even on my computer
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

Wireless charging on VZW version.

What's up fellas. I just purchased a note 3 and the seller also included an oem wireless charging backplate.
First.. Would this work? I think on my note 2 VZW had blocked the wireless charging connector (the only oem to do that AGAIN).
If it does work, what is the best wireless charging plate to use, and is it even worth it bc USB 3.0 charging is supposed to be pretty quick
FormeriPhoney said:
What's up fellas. I just purchased a note 3 and the seller also included an oem wireless charging backplate.
First.. Would this work? I think on my note 2 VZW had blocked the wireless charging connector (the only oem to do that AGAIN).
If it does work, what is the best wireless charging plate to use, and is it even worth it bc USB 3.0 charging is supposed to be pretty quick
Click to expand...
Click to collapse
there is already a thread on wireless charging, you could just post in there, no need to open a new thread.
Mod Edit
Duplicate thread is duplicate
Thread closed
malybru
Forum Moderator

Wireless Charger [Q]

Ok So i plan to buy this wireless charger from ebay
http://www.ebay.com/itm/301026832764?var=600172813833&ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
Its $36 but i had a few question.
1. I see that this charger says output 600ma. Is that low for a wireless charger?
I have seen some that are 500ma. and i believe the phone would be 1.5a via cable right?
2. If its plug into the charger and i sat it on the wireless pad, will there be any problems?
I plan to put the wireless pad where i normally lay my phone. At night i will plug the phone up via normal charger.
3. What is the range on these chargers?
I was thinking about buying a second one for the car. I currently have a sticky pad i put my phone on so it doesnt slide around while
driving.
Would i be able to put that sticky pad on top of the wireless base and then lay my phone on top of that and still have it charger?
I believe the stickey pad is about a 1mm or 2 thick.
If any of you think there is a better charger for around the same price please post up.
I look for a very days and found that one and it seems like a good deal to me but idk.
I would try looking around in here or asking some people in here: http://forum.xda-developers.com/showthread.php?t=2438168
Good Luck!
Mod Edit
As ZOOPidy says, there is already a thread for this.
Thread closed
malybru
Forum Moderator

[Q] Magnetic charging cable

Hello Guys
i'm new in the z2 family. Just saw an ad for DCU28 charging cable from sony available in india on ebay. can i use it with my z2? how much ouput does it provide or is the output depending on the power source? also i use a nilkin frosted case with my phone. can i use this cable without removing the case? thanks in advance
Magnetic charging cable, quicker than usual usb charging loads?
nrgleon said:
Magnetic charging cable, quicker than usual usb charging loads?
Click to expand...
Click to collapse
i don't know about quicker that's why i kept this post asking about it, but it helps in not needing to open the charging flap every time i need to charge my phone.
any one? no comments?
kunaltyagii said:
any one? no comments?
Click to expand...
Click to collapse
VERY annoying bumping your own post when you should have posted maybe in QandA not here.
Yes you can use the DU28 on a Z2, The charge rate depends on a few things...
As for the charging this depends on the charger you are using. Does it ID the ports to leads or does ot allow full power on a non id cable. If so you will get away with the full charge on this DU28 cable as it is only for 'charging'
Next time please search the forum for the answer before posting a question.

Categories

Resources