Hi I have rooted my UK i9100 with odin and successfully installed resurrection remix previously. When trying to flash an updated version I stupidly forgot to factory wipe and now my phone wont boot, it gets stuck on the rom boot screen and i cant get into cwm.
I can get into download mode and from there have tried flashing another rom via odin (litening rom) to see if that would boot to get me into cwm but that freezes on the boot screen also. I tried to use Galaxys2recovery as shown on zedomax youtube channel but then realised that is done from gingerbread only. I tried reflashing "CF-Root-SGS2_XX_OXX_LP6-v5.2-CWM5" via odin and then the litening rom again but that still hangs when trying to boot.
Is there something obvious I should be doing? ..I am (unsuprisingly) a noob
Thank you
you could have asked at the first time itself, before various yourown attempts ?
if you are able to get CWM now, try to install the ROM after data factory reset and all the wipes + system format from Mounts & storage.
if it didnt help again go to CWM do all the wipes and format system, and switch off and get into the download mod and flash a GB stock rom from ODIN
I can get into download mode and from there have tried flashing another rom via odin (litening rom) to see if that would boot to get me into cwm but that freezes on the boot screen also
Click to expand...
Click to collapse
odin if for stock roms not custom roms / .zip files....
zaheedahmed said:
if it didnt help again go to CWM
Click to expand...
Click to collapse
that's the thing, i cant get into cwm, or at least i don't know how to. Is there a file I can install from odin that will put me straight into cwm without having a working rom?
why do you wait to boot the phone to get into the CWM,
didnt you try Vol-up+Home+Power while phone is off
After installing a custom rom, my phone got bricked. Now I dont have any ideas how to do it. I even made a backup before installing a custom rom through CWM. But I cannot even boot into CWM because of the bootloop. Please guys. I need help.
DigiplaySh!t said:
After installing a custom rom, my phone got bricked. Now I dont have any ideas how to do it. I even made a backup before installing a custom rom through CWM. But I cannot even boot into CWM because of the bootloop. Please guys. I need help.
Click to expand...
Click to collapse
Just use One touch upgrade. Connect your phone to your computer and then start the upgrade. Your devices will have an hard- reset, and the cwm will be deleted.
Hello, I have a problem. I need advice, When I got the phone from a complaint and install the rom i had before (Supersense-dx5_1.02) the same (mySENSEdx5_RC4.0). Installation is successful, but after booting the old load rom again. During installation there were no errors. I installed also InsertCoin and it worked successfully.
Thank you for advice.
eventai said:
Hello, I have a problem. I need advice, When I got the phone from a complaint and install the rom i had before (Supersense-dx5_1.02) the same (mySENSEdx5_RC4.0). Installation is successful, but after booting the old load rom again. During installation there were no errors. I installed also InsertCoin and it worked successfully.
Thank you for advice.
Click to expand...
Click to collapse
Probably a bad download, redownload the rom and try again. And do a full wipe before flashing
moto e condor not booting after installing cm12 on the device. i have followed all the correct procedure but the device is stuck at the cm symbol while bootings. It blinks and blinks. I have waited for almost 2 days but no result. Please help!!!
i have not installed gapps in the process could it be the problem?? :crying::crying:
thanks in advance..:good:
pravardhan96 said:
moto e condor not booting after installing cm12 on the device. i have followed all the correct procedure but the device is stuck at the cm symbol while bootings. It blinks and blinks. I have waited for almost 2 days but no result. Please help!!!
i have not installed gapps in the process could it be the problem?? :crying::crying:
thanks in advance..:good:
Click to expand...
Click to collapse
may be that is the problm,again go to recovery format factory reset and then install cm12 and install gapps and then reboot,make sure gapps for lollipop u install
I don't think so. I installed cm12 without gapps worked fine. But still. Try every option u can to restore your phone. Maybe u need to flash gapps for newer version of cm12. Let us know if anything worked for you. Your info coold help others. Good luck mate.
pravardhan96 said:
moto e condor not booting after installing cm12 on the device. i have followed all the correct procedure but the device is stuck at the cm symbol while bootings. It blinks and blinks. I have waited for almost 2 days but no result. Please help!!!
i have not installed gapps in the process could it be the problem?? :crying::crying:
thanks in advance..:good:
Click to expand...
Click to collapse
may be the downloaded file is corrupted while it was downloaded, happened to me also. download the file again and do a 'clean' installation.
flashing gapps have no connection whatsoever with rom installation. :good:
Install CM11, boot it up once, then install CM12+gapps without wiping.
pravardhan96 said:
moto e condor not booting after installing cm12 on the device. i have followed all the correct procedure but the device is stuck at the cm symbol while bootings. It blinks and blinks. I have waited for almost 2 days but no result. Please help!!!
i have not installed gapps in the process could it be the problem?? :crying::crying:
thanks in advance..:good:
Click to expand...
Click to collapse
Flashing a ROM without gapps will not cause any bootloop issue
how ever you can try these two :
1. If you are using the 27th March build, don't use that, there's some problem with that, if you clean flash that zip, it ll result into a bootloop, use the 28th March build instead
2. If you are still facing a bootloop, make sure that you are using the TWRP 2.8.5 version
Sent from my Moto E using XDA Free mobile app
pravardhan96 said:
moto e condor not booting after installing cm12 on the device. i have followed all the correct procedure but the device is stuck at the cm symbol while bootings. It blinks and blinks. I have waited for almost 2 days but no result. Please help!!!
i have not installed gapps in the process could it be the problem?? :crying::crying:
thanks in advance..:good:
Click to expand...
Click to collapse
Hi, first of all, download the latest build, do a clean flash of all partitions, data, system, cache & dalvik, if you don't wanna loose your data make a backup and restore it only when you have booted your device at least once to make sure it boots, and as recommendation flash a custom kernel after verifying the boot, tell us how it goes Luck!
I tried all the options. I installed the latest build. I cleared cache, dalvik cache, factory reset, etc. But no use its always gets the same situation. Due to the bootloop the device was not detected in Pc so I transferred the cm12 zip to external so card and tried installing it from their. Could dis be a problem?? ? This time I also installed gapps. Please help I want my device back:crying:
pravardhan96 said:
I tried all the options. I installed the latest build. I cleared cache, dalvik cache, factory reset, etc. But no use its always gets the same situation. Due to the bootloop the device was not detected in Pc so I transferred the cm12 zip to external so card and tried installing it from their. Could dis be a problem?? ? This time I also installed gapps. Please help I want my device back:crying:
Click to expand...
Click to collapse
re store back to stock rom 4.4.4. do not flash stock 4.4.2
Where can I find the stock rom 4.4.4?? What if I flashed into 4.4.2??
pravardhan96 said:
Where can I find the stock rom 4.4.4?? What if I flashed into 4.4.2??
Click to expand...
Click to collapse
find stock rom 4.4.4 somewhere on xda developer site or google u will get it, if u flash android 4.4.2 and then update to android 4.4.4 through sofware update. ur moto e get potentially bricked because u have unlocked the bootloader, when u update stock rom replace the bootlaoder. then u cannot recover ur loving moto e,,then u have only one option to change the motherboard
pravardhan96 said:
Where can I find the stock rom 4.4.4?? What if I flashed into 4.4.2??[/QU
Click to expand...
Click to collapse
pravardhan96 said:
Where can I find the stock rom 4.4.4?? What if I flashed into 4.4.2??
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-e/development/downgrade-5-0-x-to-4-4-4-stock-firmware-t3031073
This you can do if you have installed soak test via putting it in your sd card or installed via OTA(ie if you have updated your bootloader) and make sure drivers are installed
Hope it helped
I believe I have the same problem. I tried going from stock 4.4.4 to cm12. Tested april 1st and april 2nd builds and I always get stuck in boot screen animation for nearly one hour.
Whenever I install the rom I get the following message "detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system". I used sideload and the external SD.
Will it brick if I try installing CM11 now after a wipe? Will it be considered a downgrade (even if I never properly booted)?
Sorry if it seems I'm hijacking this thread, but I believe we both have the same problem. I necessary I'll create another topic.
Thanks
Sarmatios said:
I believe I have the same problem. I tried going from stock 4.4.4 to cm12. Tested april 1st and april 2nd builds and I always get stuck in boot screen animation for nearly one hour.
Whenever I install the rom I get the following message "detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system". I used sideload and the external SD.
Will it brick if I try installing CM11 now after a wipe? Will it be considered a downgrade (even if I never properly booted)?
Sorry if it seems I'm hijacking this thread, but I believe we both have the same problem. I necessary I'll create another topic.
Thanks
Click to expand...
Click to collapse
no, you can flash cm11, provided you have never flashed the soak test zip anytime before
and about the bootloop, try using the previous version of TWRP, many people have stated that when they tried flashing with the previous version of TWRP it didn't result into bootloop
Hit Thanks if that was helpful
Quick update, with a solution.
Indeed I changed the recovery for TWRP and chose to clean the system in addition to cache, data and dalvik. After that I installed CM12 through sideload and this time it worked fine. Even if I still got the message "detected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system".
Hope this helps OP as well!
Hi
Hi Guys, I am facing this problem too and not able to boot and stuck on CM bootlogo. I am using TWRP 2.8.5.0, if any previous version of TWRP solves this issue then please let me know which version of TWRP to be flashed and where to download it from. My device is not is usable condition right now.
MrJukeHardbane said:
Hi Guys, I am facing this problem too and not able to boot and stuck on CM bootlogo. I am using TWRP 2.8.5.0, if any previous version of TWRP solves this issue then please let me know which version of TWRP to be flashed and where to download it from. My device is not is usable condition right now.
Click to expand...
Click to collapse
Try to flash twrp 2.7 version
suresh.anthati said:
Try to flash twrp 2.7 version
Click to expand...
Click to collapse
Flashing 2.7.1.0 is not helping too and still stuck on bootlogo after flashing 03 April cm12 nightly
Sent from my HTCSensation using XDA Premium 4 mobile app
Hi,
I facing the same issue. Roms tested:
cm-12.1-20150411-UNOFFICIAL-condor.zip
cm-12.1-20150412-ROBBIEL811-UBER4.8-condor.zip
cm-12-20150411-NIGHTLY-condor.zip
with recoveries:
twrp2.8.5.0-condor.img
cwm_6051_condor.img
cwm_6050_condor.img
All combinations fail to boot. Tested in CWM with sideload and SD, format all, and nothing.
After all test, still can't boot.
BTW, Bootloader xt1021 5009. Is there any newer version ?
(My MotoG bootloader has to be upgraded to run latest versions)
---------- Post added at 08:12 PM ---------- Previous post was at 07:22 PM ----------
The last option is recover it from paperweight; downgrade to 4.4.4 (RETESALL_XT1021_4.4.4_KXC21.5-40_cid7_CFC.xml.zip)
In fastboot:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot erase cache
fastboot erase userdata
fastboot reboot
After all, is working again, in stock rom.
glococo said:
Hi,
I facing the same issue. Roms tested:
cm-12.1-20150411-UNOFFICIAL-condor.zip
cm-12.1-20150412-ROBBIEL811-UBER4.8-condor.zip
cm-12-20150411-NIGHTLY-condor.zip
...
Click to expand...
Click to collapse
I flashed a official ota update, but flashing failed(probably because my phone was rooted) and from then the phone is having a bootloop. i first wiped cached paritition. and when it didn't work, i wiped all the user data and did factory reset. but no success. please help. my phone is rooted Infocus M2 3G Indian version running stock 4.4.2 and stock recovery. thanks in advance.
Download a stock ROM fr ur device and reflash it.
abhinavp649 said:
Download a stock ROM fr ur device and reflash it.
Click to expand...
Click to collapse
thanks for replying. idea of flashing a stock struck me, but thanks for confirming.
By the way, is any custom rom available for my phone, in order upgrade to lollipop (obviously marshmallow is not available), also is twrp or cwm compatible. I googled a lot but no success.
thanks in advance
i flashed the stock rom, but screen is continously flickering at boot and its stuck at boot:crying:
recovery too is flickering and it is not working properly:crying:
Try completely formatting your phone, instead of overwriting files on previous one. wipe out everything rom, Recovery, Cache and all data. Then do a fresh install.
abhinavp649 said:
Try completely formatting your phone, instead of overwriting files on previous one. wipe out everything rom, Recovery, Cache and all data. Then do a fresh install.
Click to expand...
Click to collapse
how to wipe rom and recovery before flashing
you can do with SP flash tool.. Just format all the data.. and reflash the rom
Infocus m2 has a locked bootloader.. Without unlocking bootloader, no development is possible
sorry for late reply,
i tried flashing using sp flash tool long back but that didn't work, and finally on 16th i took it to service center. they flashed it with stock rom, though i don't know how exactly did they do it.
thanks for reply though they didn't work
needed help
please help me..
i have infocus m2 3g and it is rooted.
once i normally switched off my phone.
when i tried to turn on .. the infocus logo is comming and its restarting automatically and continuously..tried to open recovery. but recoovery also not opening...
please please help me
Pavankumar1999 said:
please help me..
i have infocus m2 3g and it is rooted.
once i normally switched off my phone.
when i tried to turn on .. the infocus logo is comming and its restarting automatically and continuously..tried to open recovery. but recoovery also not opening...
please please help me
Click to expand...
Click to collapse
Check this thread :-
https://forum.xda-developers.com/general/general/infocus-m2-3g-stock-firmwarefixing-t3359310
hope this helps